From: Tejun Heo <htejun@gmail.com>
To: Jeff Garzik <jeff@garzik.org>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-ide@vger.kernel.org, Forrest Zhao <forrest.zhao@gmail.com>
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 08/16] libata-link: linkify config/EH related functions
Date: Sun, 1 Jul 2007 19:06:00 +0900 [thread overview]
Message-ID: <11832843602904-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11832843581399-git-send-email-htejun@gmail.com>
Make the following functions deal with ata_link instead of ata_port.
* ata_set_mode()
* ata_eh_autopsy() and related functions
* ata_eh_report() and related functions
* suspend/resume related functions
* ata_eh_recover() and related functions
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/ata_generic.c | 7 ++-
drivers/ata/libata-core.c | 18 ++++---
drivers/ata/libata-eh.c | 121 ++++++++++++++++++++++--------------------
drivers/ata/libata.h | 2 +-
drivers/ata/pata_it821x.c | 6 +-
drivers/ata/pata_ixp4xx_cf.c | 4 +-
drivers/ata/pata_legacy.c | 6 +-
drivers/ata/pata_optidma.c | 11 ++--
drivers/ata/pata_pcmcia.c | 12 ++--
drivers/ata/pata_pdc2027x.c | 11 ++--
drivers/ata/pata_platform.c | 4 +-
drivers/ata/pata_rz1000.c | 6 +-
drivers/ata/sata_sil.c | 16 +++---
include/linux/libata.h | 4 +-
14 files changed, 119 insertions(+), 109 deletions(-)
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 571c35f..12e996e 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -34,7 +34,7 @@
/**
* generic_set_mode - mode setting
- * @ap: interface to set up
+ * @link: link to set up
* @unused: returned device on error
*
* Use a non standard set_mode function. We don't want to be tuned.
@@ -43,8 +43,9 @@
* and respect them.
*/
-static int generic_set_mode(struct ata_port *ap, struct ata_device **unused)
+static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
{
+ struct ata_port *ap = link->ap;
int dma_enabled = 0;
struct ata_device *dev;
@@ -52,7 +53,7 @@ static int generic_set_mode(struct ata_port *ap, struct ata_device **unused)
if (ap->ioaddr.bmdma_addr)
dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_link_for_each_dev(dev, link) {
if (ata_dev_enabled(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b8f7b65..863d60d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2194,7 +2194,7 @@ int ata_bus_probe(struct ata_port *ap)
}
/* configure transfer mode */
- rc = ata_set_mode(ap, &dev);
+ rc = ata_set_mode(&ap->link, &dev);
if (rc)
goto fail;
@@ -2805,7 +2805,7 @@ static int ata_dev_set_mode(struct ata_device *dev)
/**
* ata_do_set_mode - Program timings and issue SET FEATURES - XFER
- * @ap: port on which timings will be programmed
+ * @link: link on which timings will be programmed
* @r_failed_dev: out paramter for failed device
*
* Standard implementation of the function used to tune and set
@@ -2820,9 +2820,9 @@ static int ata_dev_set_mode(struct ata_device *dev)
* 0 on success, negative errno otherwise
*/
-int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
+int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
{
- struct ata_link *link = &ap->link;
+ struct ata_port *ap = link->ap;
struct ata_device *dev;
int rc = 0, used_dma = 0, found = 0;
@@ -2900,7 +2900,7 @@ int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
/**
* ata_set_mode - Program timings and issue SET FEATURES - XFER
- * @ap: port on which timings will be programmed
+ * @link: link on which timings will be programmed
* @r_failed_dev: out paramter for failed device
*
* Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If
@@ -2913,12 +2913,14 @@ int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
* RETURNS:
* 0 on success, negative errno otherwise
*/
-int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
+int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
{
+ struct ata_port *ap = link->ap;
+
/* has private set_mode? */
if (ap->ops->set_mode)
- return ap->ops->set_mode(ap, r_failed_dev);
- return ata_do_set_mode(ap, r_failed_dev);
+ return ap->ops->set_mode(link, r_failed_dev);
+ return ata_do_set_mode(link, r_failed_dev);
}
/**
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 6cef201..6581222 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1136,7 +1136,7 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc)
/**
* ata_eh_analyze_serror - analyze SError for a failed port
- * @ap: ATA port to analyze SError for
+ * @link: ATA link to analyze SError for
*
* Analyze SError if available and further determine cause of
* failure.
@@ -1144,9 +1144,9 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc)
* LOCKING:
* None.
*/
-static void ata_eh_analyze_serror(struct ata_port *ap)
+static void ata_eh_analyze_serror(struct ata_link *link)
{
- struct ata_eh_context *ehc = &ap->link.eh_context;
+ struct ata_eh_context *ehc = &link->eh_context;
u32 serror = ehc->i.serror;
unsigned int err_mask = 0, action = 0;
@@ -1176,7 +1176,7 @@ static void ata_eh_analyze_serror(struct ata_port *ap)
/**
* ata_eh_analyze_ncq_error - analyze NCQ error
- * @ap: ATA port to analyze NCQ error for
+ * @link: ATA link to analyze NCQ error for
*
* Read log page 10h, determine the offending qc and acquire
* error status TF. For NCQ device errors, all LLDDs have to do
@@ -1186,10 +1186,11 @@ static void ata_eh_analyze_serror(struct ata_port *ap)
* LOCKING:
* Kernel thread context (may sleep).
*/
-static void ata_eh_analyze_ncq_error(struct ata_port *ap)
+static void ata_eh_analyze_ncq_error(struct ata_link *link)
{
- struct ata_eh_context *ehc = &ap->link.eh_context;
- struct ata_device *dev = ap->link.device;
+ struct ata_port *ap = link->ap;
+ struct ata_eh_context *ehc = &link->eh_context;
+ struct ata_device *dev = link->device;
struct ata_queued_cmd *qc;
struct ata_taskfile tf;
int tag, rc;
@@ -1199,7 +1200,7 @@ static void ata_eh_analyze_ncq_error(struct ata_port *ap)
return;
/* is it NCQ device error? */
- if (!ap->link.sactive || !(ehc->i.err_mask & AC_ERR_DEV))
+ if (!link->sactive || !(ehc->i.err_mask & AC_ERR_DEV))
return;
/* has LLDD analyzed already? */
@@ -1216,13 +1217,13 @@ static void ata_eh_analyze_ncq_error(struct ata_port *ap)
/* okay, this error is ours */
rc = ata_eh_read_log_10h(dev, &tag, &tf);
if (rc) {
- ata_port_printk(ap, KERN_ERR, "failed to read log page 10h "
+ ata_link_printk(link, KERN_ERR, "failed to read log page 10h "
"(errno=%d)\n", rc);
return;
}
- if (!(ap->link.sactive & (1 << tag))) {
- ata_port_printk(ap, KERN_ERR, "log page 10h reported "
+ if (!(link->sactive & (1 << tag))) {
+ ata_link_printk(link, KERN_ERR, "log page 10h reported "
"inactive tag %d\n", tag);
return;
}
@@ -1486,18 +1487,18 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io,
/**
* ata_eh_autopsy - analyze error and determine recovery action
- * @ap: ATA port to perform autopsy on
+ * @link: ATA link to perform autopsy on
*
- * Analyze why @ap failed and determine which recovery action is
- * needed. This function also sets more detailed AC_ERR_* values
- * and fills sense data for ATAPI CHECK SENSE.
+ * Analyze why @link failed and determine which recovery actions
+ * are needed. This function also sets more detailed AC_ERR_*
+ * values and fills sense data for ATAPI CHECK SENSE.
*
* LOCKING:
* Kernel thread context (may sleep).
*/
-static void ata_eh_autopsy(struct ata_port *ap)
+static void ata_eh_autopsy(struct ata_link *link)
{
- struct ata_link *link = &ap->link;
+ struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
unsigned int all_err_mask = 0;
int tag, is_io = 0;
@@ -1513,7 +1514,7 @@ static void ata_eh_autopsy(struct ata_port *ap)
rc = sata_scr_read(link, SCR_ERROR, &serror);
if (rc == 0) {
ehc->i.serror |= serror;
- ata_eh_analyze_serror(ap);
+ ata_eh_analyze_serror(link);
} else if (rc != -EOPNOTSUPP) {
/* SError read failed, force hardreset and probing */
ata_ehi_schedule_probe(&ehc->i);
@@ -1522,7 +1523,7 @@ static void ata_eh_autopsy(struct ata_port *ap)
}
/* analyze NCQ failure */
- ata_eh_analyze_ncq_error(ap);
+ ata_eh_analyze_ncq_error(link);
/* any real error trumps AC_ERR_OTHER */
if (ehc->i.err_mask & ~AC_ERR_OTHER)
@@ -1533,7 +1534,7 @@ static void ata_eh_autopsy(struct ata_port *ap)
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
- if (!(qc->flags & ATA_QCFLAG_FAILED))
+ if (!(qc->flags & ATA_QCFLAG_FAILED) || qc->dev->link != link)
continue;
/* inherit upper level err_mask */
@@ -1588,16 +1589,17 @@ static void ata_eh_autopsy(struct ata_port *ap)
/**
* ata_eh_report - report error handling to user
- * @ap: ATA port EH is going on
+ * @link: ATA link EH is going on
*
* Report EH to user.
*
* LOCKING:
* None.
*/
-static void ata_eh_report(struct ata_port *ap)
+static void ata_eh_report(struct ata_link *link)
{
- struct ata_eh_context *ehc = &ap->link.eh_context;
+ struct ata_port *ap = link->ap;
+ struct ata_eh_context *ehc = &link->eh_context;
const char *frozen, *desc;
int tag, nr_failed = 0;
@@ -1608,7 +1610,7 @@ static void ata_eh_report(struct ata_port *ap)
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
- if (!(qc->flags & ATA_QCFLAG_FAILED))
+ if (!(qc->flags & ATA_QCFLAG_FAILED) || qc->dev->link != link)
continue;
if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask)
continue;
@@ -1626,17 +1628,17 @@ static void ata_eh_report(struct ata_port *ap)
if (ehc->i.dev) {
ata_dev_printk(ehc->i.dev, KERN_ERR, "exception Emask 0x%x "
"SAct 0x%x SErr 0x%x action 0x%x%s\n",
- ehc->i.err_mask, ap->link.sactive,
+ ehc->i.err_mask, link->sactive,
ehc->i.serror, ehc->i.action, frozen);
if (desc)
ata_dev_printk(ehc->i.dev, KERN_ERR, "%s\n", desc);
} else {
- ata_port_printk(ap, KERN_ERR, "exception Emask 0x%x "
+ ata_link_printk(link, KERN_ERR, "exception Emask 0x%x "
"SAct 0x%x SErr 0x%x action 0x%x%s\n",
- ehc->i.err_mask, ap->link.sactive,
+ ehc->i.err_mask, link->sactive,
ehc->i.serror, ehc->i.action, frozen);
if (desc)
- ata_port_printk(ap, KERN_ERR, "%s\n", desc);
+ ata_link_printk(link, KERN_ERR, "%s\n", desc);
}
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
@@ -1649,7 +1651,8 @@ static void ata_eh_report(struct ata_port *ap)
struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
struct ata_taskfile *cmd = &qc->tf, *res = &qc->result_tf;
- if (!(qc->flags & ATA_QCFLAG_FAILED) || !qc->err_mask)
+ if (!(qc->flags & ATA_QCFLAG_FAILED) ||
+ qc->dev->link != link || !qc->err_mask)
continue;
ata_dev_printk(qc->dev, KERN_ERR,
@@ -1871,10 +1874,11 @@ static int ata_eh_reset(struct ata_link *link, int classify,
return rc;
}
-static int ata_eh_revalidate_and_attach(struct ata_port *ap,
+static int ata_eh_revalidate_and_attach(struct ata_link *link,
struct ata_device **r_failed_dev)
{
- struct ata_eh_context *ehc = &ap->link.eh_context;
+ struct ata_port *ap = link->ap;
+ struct ata_eh_context *ehc = &link->eh_context;
struct ata_device *dev;
unsigned int new_mask = 0;
unsigned long flags;
@@ -1886,7 +1890,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
* be done backwards such that PDIAG- is released by the slave
* device before the master device is identified.
*/
- ata_link_for_each_dev_reverse(dev, &ap->link) {
+ ata_link_for_each_dev_reverse(dev, link) {
unsigned int action = ata_eh_dev_action(dev);
unsigned int readid_flags = 0;
@@ -1894,17 +1898,17 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
readid_flags |= ATA_READID_POSTRESET;
if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) {
- if (ata_link_offline(&ap->link)) {
+ if (ata_link_offline(link)) {
rc = -EIO;
goto err;
}
- ata_eh_about_to_do(&ap->link, dev, ATA_EH_REVALIDATE);
+ ata_eh_about_to_do(link, dev, ATA_EH_REVALIDATE);
rc = ata_dev_revalidate(dev, readid_flags);
if (rc)
goto err;
- ata_eh_done(&ap->link, dev, ATA_EH_REVALIDATE);
+ ata_eh_done(link, dev, ATA_EH_REVALIDATE);
/* Configuration may have changed, reconfigure
* transfer mode.
@@ -1946,7 +1950,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
/* Configure new devices forward such that user doesn't see
* device detection messages backwards.
*/
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_link_for_each_dev(dev, link) {
if (!(new_mask & (1 << dev->devno)))
continue;
@@ -1972,40 +1976,40 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
return rc;
}
-static int ata_port_nr_enabled(struct ata_port *ap)
+static int ata_link_nr_enabled(struct ata_link *link)
{
struct ata_device *dev;
int cnt = 0;
- ata_link_for_each_dev(dev, &ap->link)
+ ata_link_for_each_dev(dev, link)
if (ata_dev_enabled(dev))
cnt++;
return cnt;
}
-static int ata_port_nr_vacant(struct ata_port *ap)
+static int ata_link_nr_vacant(struct ata_link *link)
{
struct ata_device *dev;
int cnt = 0;
- ata_link_for_each_dev(dev, &ap->link)
+ ata_link_for_each_dev(dev, link)
if (dev->class == ATA_DEV_UNKNOWN)
cnt++;
return cnt;
}
-static int ata_eh_skip_recovery(struct ata_port *ap)
+static int ata_eh_skip_recovery(struct ata_link *link)
{
- struct ata_eh_context *ehc = &ap->link.eh_context;
+ struct ata_eh_context *ehc = &link->eh_context;
struct ata_device *dev;
/* thaw frozen port, resume link and recover failed devices */
- if ((ap->pflags & ATA_PFLAG_FROZEN) ||
- (ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_port_nr_enabled(ap))
+ if ((link->ap->pflags & ATA_PFLAG_FROZEN) ||
+ (ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_link_nr_enabled(link))
return 0;
/* skip if class codes for all vacant slots are ATA_DEV_NONE */
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_link_for_each_dev(dev, link) {
if (dev->class == ATA_DEV_UNKNOWN &&
ehc->classes[dev->devno] != ATA_DEV_NONE)
return 0;
@@ -2089,14 +2093,15 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset)
{
- struct ata_eh_context *ehc = &ap->link.eh_context;
+ struct ata_link *link = &ap->link;
+ struct ata_eh_context *ehc = &link->eh_context;
struct ata_device *dev;
int rc;
DPRINTK("ENTER\n");
/* prep for recovery */
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_link_for_each_dev(dev, link) {
ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
/* collect port action mask recorded in dev actions */
@@ -2126,20 +2131,20 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
goto out;
/* skip EH if possible. */
- if (ata_eh_skip_recovery(ap))
+ if (ata_eh_skip_recovery(link))
ehc->i.action = 0;
- ata_link_for_each_dev(dev, &ap->link)
+ ata_link_for_each_dev(dev, link)
ehc->classes[dev->devno] = ATA_DEV_UNKNOWN;
/* reset */
if (ehc->i.action & ATA_EH_RESET_MASK) {
ata_eh_freeze_port(ap);
- rc = ata_eh_reset(&ap->link, ata_port_nr_vacant(ap), prereset,
+ rc = ata_eh_reset(link, ata_link_nr_vacant(link), prereset,
softreset, hardreset, postreset);
if (rc) {
- ata_port_printk(ap, KERN_ERR,
+ ata_link_printk(link, KERN_ERR,
"reset failed, giving up\n");
goto out;
}
@@ -2148,13 +2153,13 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
}
/* revalidate existing devices and attach new ones */
- rc = ata_eh_revalidate_and_attach(ap, &dev);
+ rc = ata_eh_revalidate_and_attach(link, &dev);
if (rc)
goto dev_fail;
/* configure transfer mode if necessary */
if (ehc->i.flags & ATA_EHI_SETMODE) {
- rc = ata_set_mode(ap, &dev);
+ rc = ata_set_mode(link, &dev);
if (rc)
goto dev_fail;
ehc->i.flags &= ~ATA_EHI_SETMODE;
@@ -2165,8 +2170,8 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
dev_fail:
ata_eh_handle_dev_fail(dev, rc);
- if (ata_port_nr_enabled(ap)) {
- ata_port_printk(ap, KERN_WARNING, "failed to recover some "
+ if (ata_link_nr_enabled(link)) {
+ ata_link_printk(link, KERN_WARNING, "failed to recover some "
"devices, retrying in 5 secs\n");
ssleep(5);
} else {
@@ -2178,7 +2183,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
out:
if (rc) {
- ata_link_for_each_dev(dev, &ap->link);
+ ata_link_for_each_dev(dev, link);
ata_dev_disable(dev);
}
@@ -2245,8 +2250,8 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset)
{
- ata_eh_autopsy(ap);
- ata_eh_report(ap);
+ ata_eh_autopsy(&ap->link);
+ ata_eh_report(&ap->link);
ata_eh_recover(ap, prereset, softreset, hardreset, postreset);
ata_eh_finish(ap);
}
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 700843a..6d85ede 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -81,7 +81,7 @@ extern int ata_dev_configure(struct ata_device *dev);
extern int sata_down_spd_limit(struct ata_link *link);
extern int sata_set_spd_needed(struct ata_link *link);
extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
-extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
+extern int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
extern void ata_sg_clean(struct ata_queued_cmd *qc);
extern void ata_qc_free(struct ata_queued_cmd *qc);
extern void ata_qc_issue(struct ata_queued_cmd *qc);
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 95ffb50..7c61bef 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -450,7 +450,7 @@ static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
/**
* it821x_smart_set_mode - mode setting
- * @ap: interface to set up
+ * @link: interface to set up
* @unused: device that failed (error only)
*
* Use a non standard set_mode function. We don't want to be tuned.
@@ -459,11 +459,11 @@ static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
* and respect them.
*/
-static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused)
+static int it821x_smart_set_mode(struct ata_link *link, struct ata_device **unused)
{
struct ata_device *dev;
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_link_for_each_dev(dev, link) {
if (ata_dev_enabled(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 667d293..0c0c607 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -26,11 +26,11 @@
#define DRV_NAME "pata_ixp4xx_cf"
#define DRV_VERSION "0.2"
-static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
+static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
{
struct ata_device *dev;
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_link_for_each_dev(dev, link) {
if (ata_dev_enabled(dev)) {
ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
dev->pio_mode = XFER_PIO_0;
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 9d92843..cfb2bc8 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -96,7 +96,7 @@ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
/**
* legacy_set_mode - mode setting
- * @ap: IDE interface
+ * @link: IDE link
* @unused: Device that failed when error is returned
*
* Use a non standard set_mode function. We don't want to be tuned.
@@ -107,11 +107,11 @@ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
* expand on this as per hdparm in the base kernel.
*/
-static int legacy_set_mode(struct ata_port *ap, struct ata_device **unused)
+static int legacy_set_mode(struct ata_link *link, struct ata_device **unused)
{
struct ata_device *dev;
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_link_for_each_dev(dev, link) {
if (ata_dev_enabled(dev)) {
ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
dev->pio_mode = XFER_PIO_0;
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 39fcba8..09ef725 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -324,25 +324,26 @@ static u8 optidma_make_bits43(struct ata_device *adev)
/**
* optidma_set_mode - mode setup
- * @ap: port to set up
+ * @link: link to set up
*
* Use the standard setup to tune the chipset and then finalise the
* configuration by writing the nibble of extra bits of data into
* the chip.
*/
-static int optidma_set_mode(struct ata_port *ap, struct ata_device **r_failed)
+static int optidma_set_mode(struct ata_link *link, struct ata_device **r_failed)
{
+ struct ata_port *ap = link->ap;
u8 r;
int nybble = 4 * ap->port_no;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- int rc = ata_do_set_mode(ap, r_failed);
+ int rc = ata_do_set_mode(link, r_failed);
if (rc == 0) {
pci_read_config_byte(pdev, 0x43, &r);
r &= (0x0F << nybble);
- r |= (optidma_make_bits43(&ap->link.device[0]) +
- (optidma_make_bits43(&ap->link.device[0]) << 2)) << nybble;
+ r |= (optidma_make_bits43(&link->device[0]) +
+ (optidma_make_bits43(&link->device[0]) << 2)) << nybble;
pci_write_config_byte(pdev, 0x43, r);
}
return rc;
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index fab30ab..f818e65 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -56,7 +56,7 @@ struct ata_pcmcia_info {
/**
* pcmcia_set_mode - PCMCIA specific mode setup
- * @ap: Port
+ * @link: link
* @r_failed_dev: Return pointer for failed device
*
* Perform the tuning and setup of the devices and timings, which
@@ -65,13 +65,13 @@ struct ata_pcmcia_info {
* decode, which alas is embarrassingly common in the PC world
*/
-static int pcmcia_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
+static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
{
- struct ata_device *master = &ap->link.device[0];
- struct ata_device *slave = &ap->link.device[1];
+ struct ata_device *master = &link->device[0];
+ struct ata_device *slave = &link->device[1];
if (!ata_dev_enabled(master) || !ata_dev_enabled(slave))
- return ata_do_set_mode(ap, r_failed_dev);
+ return ata_do_set_mode(link, r_failed_dev);
if (memcmp(master->id + ATA_ID_FW_REV, slave->id + ATA_ID_FW_REV,
ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0)
@@ -84,7 +84,7 @@ static int pcmcia_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev
ata_dev_disable(slave);
}
}
- return ata_do_set_mode(ap, r_failed_dev);
+ return ata_do_set_mode(link, r_failed_dev);
}
static struct scsi_host_template pcmcia_sht = {
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 62c3457..e489c96 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -69,7 +69,7 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc);
static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask);
static int pdc2027x_cable_detect(struct ata_port *ap);
-static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed);
+static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed);
/*
* ATA Timing Tables based on 133MHz controller clock.
@@ -470,23 +470,24 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
/**
* pdc2027x_set_mode - Set the timing registers back to correct values.
- * @ap: Port to configure
+ * @link: link to configure
* @r_failed: Returned device for failure
*
* The pdc2027x hardware will look at "SET FEATURES" and change the timing registers
* automatically. The values set by the hardware might be incorrect, under 133Mhz PLL.
* This function overwrites the possibly incorrect values set by the hardware to be correct.
*/
-static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed)
+static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed)
{
+ struct ata_port *ap = link->ap;
struct ata_device *dev;
int rc;
- rc = ata_do_set_mode(ap, r_failed);
+ rc = ata_do_set_mode(link, r_failed);
if (rc < 0)
return rc;
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_link_for_each_dev(dev, link) {
if (ata_dev_enabled(dev)) {
pdc2027x_set_piomode(ap, dev);
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 248d5de..dfec1a4 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -30,11 +30,11 @@ static int pio_mask = 1;
* Provide our own set_mode() as we don't want to change anything that has
* already been configured..
*/
-static int pata_platform_set_mode(struct ata_port *ap, struct ata_device **unused)
+static int pata_platform_set_mode(struct ata_link *link, struct ata_device **unused)
{
struct ata_device *dev;
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_link_for_each_dev(dev, link) {
if (ata_dev_enabled(dev)) {
/* We don't really care */
dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 300b3d5..de3698c 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -26,7 +26,7 @@
/**
* rz1000_set_mode - mode setting function
- * @ap: ATA interface
+ * @link: ATA link
* @unused: returned device on set_mode failure
*
* Use a non standard set_mode function. We don't want to be tuned. We
@@ -34,11 +34,11 @@
* whacked out.
*/
-static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused)
+static int rz1000_set_mode(struct ata_link *link, struct ata_device **unused)
{
struct ata_device *dev;
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_link_for_each_dev(dev, link) {
if (ata_dev_enabled(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index ad0d66c..1a86b22 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -117,7 +117,7 @@ static int sil_pci_device_resume(struct pci_dev *pdev);
static void sil_dev_config(struct ata_device *dev);
static int sil_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
static int sil_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
-static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed);
+static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed);
static void sil_freeze(struct ata_port *ap);
static void sil_thaw(struct ata_port *ap);
@@ -290,27 +290,27 @@ static unsigned char sil_get_device_cache_line(struct pci_dev *pdev)
/**
* sil_set_mode - wrap set_mode functions
- * @ap: port to set up
+ * @link: link to set up
* @r_failed: returned device when we fail
*
* Wrap the libata method for device setup as after the setup we need
* to inspect the results and do some configuration work
*/
-static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed)
+static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed)
{
- struct ata_host *host = ap->host;
- struct ata_device *dev;
- void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR];
+ struct ata_port *ap = link->ap;
+ void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR];
void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode;
+ struct ata_device *dev;
u32 tmp, dev_mode[2] = { };
int rc;
- rc = ata_do_set_mode(ap, r_failed);
+ rc = ata_do_set_mode(link, r_failed);
if (rc)
return rc;
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_link_for_each_dev(dev, link) {
if (!ata_dev_enabled(dev))
dev_mode[dev->devno] = 0; /* PIO0/1/2 */
else if (dev->flags & ATA_DFLAG_PIO)
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 159cbf5..81d1ee3 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -603,7 +603,7 @@ struct ata_port_operations {
void (*dev_select)(struct ata_port *ap, unsigned int device);
void (*phy_reset) (struct ata_port *ap); /* obsolete */
- int (*set_mode) (struct ata_port *ap, struct ata_device **r_failed_dev);
+ int (*set_mode) (struct ata_link *link, struct ata_device **r_failed_dev);
int (*cable_detect) (struct ata_port *ap);
@@ -833,7 +833,7 @@ extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
int queue_depth);
extern struct ata_device *ata_dev_pair(struct ata_device *adev);
-extern int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
+extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
extern u8 ata_irq_on(struct ata_port *ap);
extern u8 ata_dummy_irq_on(struct ata_port *ap);
extern u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq);
--
1.5.0.3
next prev parent reply other threads:[~2007-07-01 10:06 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-01 10:05 [PATCHSET 2/4] libata: implement ata_link, take 4 Tejun Heo
2007-07-01 10:05 ` [PATCH 01/16] libata-link: separate out ata_eh_handle_dev_fail() Tejun Heo
2007-07-11 1:47 ` Jeff Garzik
2007-07-01 10:05 ` [PATCH 02/16] libata-link: add PMP related ATA constants Tejun Heo
2007-07-01 10:05 ` [PATCH 06/16] libata-link: linkify EH action helpers Tejun Heo
2007-07-01 10:05 ` [PATCH 07/16] libata-link: linkify reset Tejun Heo
2007-07-01 10:05 ` [PATCH 05/16] libata-link: linkify PHY-related functions Tejun Heo
2007-07-01 10:05 ` [PATCH 04/16] libata-link: implement and use link/device iterators Tejun Heo
2007-07-01 10:05 ` [PATCH 03/16] libata-link: introduce ata_link Tejun Heo
2007-07-01 10:06 ` [PATCH 09/16] libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags Tejun Heo
2007-07-01 10:06 ` [PATCH 11/16] libata-link: implement ata_link_abort() Tejun Heo
2007-07-01 10:06 ` [PATCH 12/16] libata-link: add PMP links Tejun Heo
2007-07-01 10:06 ` Tejun Heo [this message]
2007-07-01 10:06 ` [PATCH 10/16] libata-link: separate out link initialization functions Tejun Heo
2007-07-11 1:52 ` Jeff Garzik
2007-07-01 10:06 ` [PATCH 13/16] libata-link: update ata_scsi_error() to handle PMP links Tejun Heo
2007-07-01 10:06 ` [PATCH 14/16] libata-link: update EH to deal with " Tejun Heo
2007-07-11 1:54 ` Jeff Garzik
2007-07-01 10:06 ` [PATCH 15/16] libata-link: update hotplug to handle " Tejun Heo
2007-07-11 1:59 ` Jeff Garzik
2007-07-11 2:45 ` Tejun Heo
2007-07-01 10:06 ` [PATCH 16/16] libata-link: update Power Management " Tejun Heo
2007-07-11 1:59 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11832843602904-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=forrest.zhao@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.