From: Tejun Heo <htejun@gmail.com>
To: Jeff Garzik <jeff@garzik.org>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-ide@vger.kernel.org, Forrest Zhao <forrest.zhao@gmail.com>
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 14/16] libata-link: update EH to deal with PMP links
Date: Sun, 1 Jul 2007 19:06:01 +0900 [thread overview]
Message-ID: <11832843614018-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11832843581399-git-send-email-htejun@gmail.com>
Update ata_eh_autopsy(), ata_eh_report(),
ata_eh_revalidate_and_attach() and ata_eh_recover() to deal with PMP
links. ata_eh_autopsy() and ata_eh_report() updates are
straightforward. They just repeat the same operation over all
configured links. The only change to ata_eh_revalidate_and_attach()
is avoiding calling ->cable_select() on non-host ports.
ata_eh_recover() update is more complex as it first processes all
resets and then performs the rest. This is necessary as thawing with
some links in unknown state can be dangerous. ehi->action is cleared
on successful recovery of a link to avoid repeating recovery due to
failures in other links.
ata_eh_recover() iterates over only PMP links if PMP is attached, and,
on failure, the failing link is returned in @failed_link instead of
disabling devices directly. These are to integrate ata_eh_recover()
into PMP EH later.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/libata-eh.c | 228 ++++++++++++++++++++++++++++++++--------------
1 files changed, 158 insertions(+), 70 deletions(-)
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 29f05b7..eb51b76 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1513,8 +1513,8 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io,
}
/**
- * ata_eh_autopsy - analyze error and determine recovery action
- * @link: ATA link to perform autopsy on
+ * ata_eh_link_autopsy - analyze error and determine recovery action
+ * @link: host link to perform autopsy on
*
* Analyze why @link failed and determine which recovery actions
* are needed. This function also sets more detailed AC_ERR_*
@@ -1523,7 +1523,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io,
* LOCKING:
* Kernel thread context (may sleep).
*/
-static void ata_eh_autopsy(struct ata_link *link)
+static void ata_eh_link_autopsy(struct ata_link *link)
{
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
@@ -1615,7 +1615,25 @@ static void ata_eh_autopsy(struct ata_link *link)
}
/**
- * ata_eh_report - report error handling to user
+ * ata_eh_autopsy - analyze error and determine recovery action
+ * @ap: host port to perform autopsy on
+ *
+ * Analyze all links of @ap and determine why they failed and
+ * which recovery actions are needed.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+static void ata_eh_autopsy(struct ata_port *ap)
+{
+ struct ata_link *link;
+
+ __ata_port_for_each_link(link, ap)
+ ata_eh_link_autopsy(link);
+}
+
+/**
+ * ata_eh_link_report - report error handling to user
* @link: ATA link EH is going on
*
* Report EH to user.
@@ -1623,7 +1641,7 @@ static void ata_eh_autopsy(struct ata_link *link)
* LOCKING:
* None.
*/
-static void ata_eh_report(struct ata_link *link)
+static void ata_eh_link_report(struct ata_link *link)
{
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
@@ -1702,6 +1720,23 @@ static void ata_eh_report(struct ata_link *link)
}
}
+/**
+ * ata_eh_report - report error handling to user
+ * @ap: ATA port to report EH about
+ *
+ * Report EH to user.
+ *
+ * LOCKING:
+ * None.
+ */
+static void ata_eh_report(struct ata_port *ap)
+{
+ struct ata_link *link;
+
+ __ata_port_for_each_link(link, ap)
+ ata_eh_link_report(link);
+}
+
static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
unsigned int *classes, unsigned long deadline)
{
@@ -1971,7 +2006,8 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
}
/* PDIAG- should have been released, ask cable type if post-reset */
- if ((ehc->i.flags & ATA_EHI_DID_RESET) && ap->ops->cable_detect)
+ if (ata_is_host_link(link) && ap->ops->cable_detect &&
+ (ehc->i.flags & ATA_EHI_DID_RESET))
ap->cbl = ap->ops->cable_detect(ap);
/* Configure new devices forward such that user doesn't see
@@ -2045,7 +2081,7 @@ static int ata_eh_skip_recovery(struct ata_link *link)
return 1;
}
-static void ata_eh_handle_dev_fail(struct ata_device *dev, int err)
+static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
{
struct ata_eh_context *ehc = &dev->link->eh_context;
@@ -2086,12 +2122,16 @@ static void ata_eh_handle_dev_fail(struct ata_device *dev, int err)
ehc->did_probe_mask |= (1 << dev->devno);
ehc->i.action |= ATA_EH_SOFTRESET;
}
+
+ return 1;
} else {
/* soft didn't work? be haaaaard */
if (ehc->i.flags & ATA_EHI_DID_RESET)
ehc->i.action |= ATA_EH_HARDRESET;
else
ehc->i.action |= ATA_EH_SOFTRESET;
+
+ return 0;
}
}
@@ -2102,12 +2142,13 @@ static void ata_eh_handle_dev_fail(struct ata_device *dev, int err)
* @softreset: softreset method (can be NULL)
* @hardreset: hardreset method (can be NULL)
* @postreset: postreset method (can be NULL)
+ * @r_failed_link: out parameter for failed link
*
* This is the alpha and omega, eum and yang, heart and soul of
* libata exception handling. On entry, actions required to
- * recover the port and hotplug requests are recorded in
- * eh_context. This function executes all the operations with
- * appropriate retrials and fallbacks to resurrect failed
+ * recover each link and hotplug requests are recorded in the
+ * link's eh_context. This function executes all the operations
+ * with appropriate retrials and fallbacks to resurrect failed
* devices, detach goners and greet newcomers.
*
* LOCKING:
@@ -2118,102 +2159,139 @@ static void ata_eh_handle_dev_fail(struct ata_device *dev, int err)
*/
static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
- ata_postreset_fn_t postreset)
+ ata_postreset_fn_t postreset,
+ struct ata_link **r_failed_link)
{
- struct ata_link *link = &ap->link;
- struct ata_eh_context *ehc = &link->eh_context;
+ struct ata_link *link;
struct ata_device *dev;
- int rc;
+ int nr_failed_devs, nr_disabled_devs;
+ int reset, rc;
DPRINTK("ENTER\n");
/* prep for recovery */
- ata_link_for_each_dev(dev, link) {
- ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
+ ata_port_for_each_link(link, ap) {
+ struct ata_eh_context *ehc = &link->eh_context;
- /* collect port action mask recorded in dev actions */
- ehc->i.action |=
- ehc->i.dev_action[dev->devno] & ~ATA_EH_PERDEV_MASK;
- ehc->i.dev_action[dev->devno] &= ATA_EH_PERDEV_MASK;
-
- /* process hotplug request */
- if (dev->flags & ATA_DFLAG_DETACH)
- ata_eh_detach_dev(dev);
+ ata_link_for_each_dev(dev, link) {
+ ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
- if (!ata_dev_enabled(dev) &&
- ((ehc->i.probe_mask & (1 << dev->devno)) &&
- !(ehc->did_probe_mask & (1 << dev->devno)))) {
- ata_eh_detach_dev(dev);
- ata_dev_init(dev);
- ehc->did_probe_mask |= (1 << dev->devno);
- ehc->i.action |= ATA_EH_SOFTRESET;
+ /* collect port action mask recorded in dev actions */
+ ehc->i.action |= ehc->i.dev_action[dev->devno] &
+ ~ATA_EH_PERDEV_MASK;
+ ehc->i.dev_action[dev->devno] &= ATA_EH_PERDEV_MASK;
+
+ /* process hotplug request */
+ if (dev->flags & ATA_DFLAG_DETACH)
+ ata_eh_detach_dev(dev);
+
+ if (!ata_dev_enabled(dev) &&
+ ((ehc->i.probe_mask & (1 << dev->devno)) &&
+ !(ehc->did_probe_mask & (1 << dev->devno)))) {
+ ata_eh_detach_dev(dev);
+ ata_dev_init(dev);
+ ehc->did_probe_mask |= (1 << dev->devno);
+ ehc->i.action |= ATA_EH_SOFTRESET;
+ }
}
}
retry:
rc = 0;
+ nr_failed_devs = 0;
+ nr_disabled_devs = 0;
+ reset = 0;
/* if UNLOADING, finish immediately */
if (ap->pflags & ATA_PFLAG_UNLOADING)
goto out;
- /* skip EH if possible. */
- if (ata_eh_skip_recovery(link))
- ehc->i.action = 0;
+ /* prep for EH */
+ ata_port_for_each_link(link, ap) {
+ struct ata_eh_context *ehc = &link->eh_context;
- ata_link_for_each_dev(dev, link)
- ehc->classes[dev->devno] = ATA_DEV_UNKNOWN;
+ /* skip EH if possible. */
+ if (ata_eh_skip_recovery(link))
+ ehc->i.action = 0;
+
+ /* do we need to reset? */
+ if (ehc->i.action & ATA_EH_RESET_MASK)
+ reset = 1;
+
+ ata_link_for_each_dev(dev, link)
+ ehc->classes[dev->devno] = ATA_DEV_UNKNOWN;
+ }
/* reset */
- if (ehc->i.action & ATA_EH_RESET_MASK) {
+ if (reset) {
ata_eh_freeze_port(ap);
- rc = ata_eh_reset(link, ata_link_nr_vacant(link), prereset,
- softreset, hardreset, postreset);
- if (rc) {
- ata_link_printk(link, KERN_ERR,
- "reset failed, giving up\n");
- goto out;
+ ata_port_for_each_link(link, ap) {
+ struct ata_eh_context *ehc = &link->eh_context;
+
+ if (!(ehc->i.action & ATA_EH_RESET_MASK))
+ continue;
+
+ rc = ata_eh_reset(link, ata_link_nr_vacant(link),
+ prereset, softreset, hardreset,
+ postreset);
+ if (rc) {
+ ata_link_printk(link, KERN_ERR,
+ "reset failed, giving up\n");
+ goto out;
+ }
}
ata_eh_thaw_port(ap);
}
- /* revalidate existing devices and attach new ones */
- rc = ata_eh_revalidate_and_attach(link, &dev);
- if (rc)
- goto dev_fail;
+ /* the rest */
+ ata_port_for_each_link(link, ap) {
+ struct ata_eh_context *ehc = &link->eh_context;
- /* configure transfer mode if necessary */
- if (ehc->i.flags & ATA_EHI_SETMODE) {
- rc = ata_set_mode(link, &dev);
+ /* revalidate existing devices and attach new ones */
+ rc = ata_eh_revalidate_and_attach(link, &dev);
if (rc)
goto dev_fail;
- ehc->i.flags &= ~ATA_EHI_SETMODE;
- }
- goto out;
+ /* configure transfer mode if necessary */
+ if (ehc->i.flags & ATA_EHI_SETMODE) {
+ rc = ata_set_mode(link, &dev);
+ if (rc)
+ goto dev_fail;
+ ehc->i.flags &= ~ATA_EHI_SETMODE;
+ }
+
+ /* this link is okay now */
+ ehc->i.flags = 0;
+ continue;
- dev_fail:
- ata_eh_handle_dev_fail(dev, rc);
+ dev_fail:
+ nr_failed_devs++;
+ if (ata_eh_handle_dev_fail(dev, rc))
+ nr_disabled_devs++;
- if (ata_link_nr_enabled(link)) {
- ata_link_printk(link, KERN_WARNING, "failed to recover some "
- "devices, retrying in 5 secs\n");
- ssleep(5);
- } else {
- /* no device left, repeat fast */
- msleep(500);
+ if (ap->pflags & ATA_PFLAG_FROZEN)
+ break;
}
- goto retry;
+ if (nr_failed_devs) {
+ if (nr_failed_devs != nr_disabled_devs) {
+ ata_port_printk(ap, KERN_WARNING, "failed to recover "
+ "some devices, retrying in 5 secs\n");
+ ssleep(5);
+ } else {
+ /* no device left to recover, repeat fast */
+ msleep(500);
+ }
- out:
- if (rc) {
- ata_link_for_each_dev(dev, link);
- ata_dev_disable(dev);
+ goto retry;
}
+ out:
+ if (rc && r_failed_link)
+ *r_failed_link = link;
+
DPRINTK("EXIT, rc=%d\n", rc);
return rc;
}
@@ -2277,9 +2355,19 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset)
{
- ata_eh_autopsy(&ap->link);
- ata_eh_report(&ap->link);
- ata_eh_recover(ap, prereset, softreset, hardreset, postreset);
+ struct ata_device *dev;
+ int rc;
+
+ ata_eh_autopsy(ap);
+ ata_eh_report(ap);
+
+ rc = ata_eh_recover(ap, prereset, softreset, hardreset, postreset,
+ NULL);
+ if (rc) {
+ ata_link_for_each_dev(dev, &ap->link)
+ ata_dev_disable(dev);
+ }
+
ata_eh_finish(ap);
}
--
1.5.0.3
next prev parent reply other threads:[~2007-07-01 10:06 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-01 10:05 [PATCHSET 2/4] libata: implement ata_link, take 4 Tejun Heo
2007-07-01 10:05 ` [PATCH 01/16] libata-link: separate out ata_eh_handle_dev_fail() Tejun Heo
2007-07-11 1:47 ` Jeff Garzik
2007-07-01 10:05 ` [PATCH 02/16] libata-link: add PMP related ATA constants Tejun Heo
2007-07-01 10:05 ` [PATCH 07/16] libata-link: linkify reset Tejun Heo
2007-07-01 10:05 ` [PATCH 06/16] libata-link: linkify EH action helpers Tejun Heo
2007-07-01 10:05 ` [PATCH 05/16] libata-link: linkify PHY-related functions Tejun Heo
2007-07-01 10:05 ` [PATCH 03/16] libata-link: introduce ata_link Tejun Heo
2007-07-01 10:05 ` [PATCH 04/16] libata-link: implement and use link/device iterators Tejun Heo
2007-07-01 10:06 ` [PATCH 11/16] libata-link: implement ata_link_abort() Tejun Heo
2007-07-01 10:06 ` [PATCH 09/16] libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags Tejun Heo
2007-07-01 10:06 ` [PATCH 12/16] libata-link: add PMP links Tejun Heo
2007-07-01 10:06 ` [PATCH 10/16] libata-link: separate out link initialization functions Tejun Heo
2007-07-11 1:52 ` Jeff Garzik
2007-07-01 10:06 ` [PATCH 08/16] libata-link: linkify config/EH related functions Tejun Heo
2007-07-01 10:06 ` [PATCH 13/16] libata-link: update ata_scsi_error() to handle PMP links Tejun Heo
2007-07-01 10:06 ` Tejun Heo [this message]
2007-07-11 1:54 ` [PATCH 14/16] libata-link: update EH to deal with " Jeff Garzik
2007-07-01 10:06 ` [PATCH 16/16] libata-link: update Power Management to handle " Tejun Heo
2007-07-11 1:59 ` Jeff Garzik
2007-07-01 10:06 ` [PATCH 15/16] libata-link: update hotplug " Tejun Heo
2007-07-11 1:59 ` Jeff Garzik
2007-07-11 2:45 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11832843614018-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=forrest.zhao@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.