From: Kumar Gala <galak@kernel.crashing.org>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
linuxppc-dev@ozlabs.org
Subject: [PATCH 01/25] [POWERPC] Create common fsl pci/e files based on 86xx platforms
Date: Mon, 23 Jul 2007 15:49:48 -0500 [thread overview]
Message-ID: <1185223813693-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <11852238122538-git-send-email-galak@kernel.crashing.org>
From: Roy Zang <tie-fei.zang@freescale.com>
Move
arch/powerpc/platforms/86xx/pci.c -> arch/powerpc/sysdev/fsl_pci.c
arch/powerpc/sysdev/fsl_pcie.h -> arch/powerpc/sysdev/fsl_pci.h
as the base to unify 83xx/85xx/86xx pci and pcie.
Add CONFIG_FSL_PCI to build fsl_pci.c for Freescale pci and pcie option.
The code still works for 86xx platforms.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/Kconfig | 4 +
arch/powerpc/platforms/86xx/Kconfig | 4 +-
arch/powerpc/platforms/86xx/Makefile | 1 -
arch/powerpc/platforms/86xx/pci.c | 238 ----------------------------------
arch/powerpc/sysdev/Makefile | 1 +
arch/powerpc/sysdev/fsl_pci.c | 238 ++++++++++++++++++++++++++++++++++
arch/powerpc/sysdev/fsl_pci.h | 94 +++++++++++++
arch/powerpc/sysdev/fsl_pcie.h | 94 -------------
8 files changed, 339 insertions(+), 335 deletions(-)
delete mode 100644 arch/powerpc/platforms/86xx/pci.c
create mode 100644 arch/powerpc/sysdev/fsl_pci.c
create mode 100644 arch/powerpc/sysdev/fsl_pci.h
delete mode 100644 arch/powerpc/sysdev/fsl_pcie.h
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 853c282..3ff90f0 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -425,6 +425,10 @@ config SBUS
config FSL_SOC
bool
+config FSL_PCI
+ bool
+ select PPC_INDIRECT_PCI
+
# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
config MCA
bool
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 0faebfd..d1c8115 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -14,8 +14,8 @@ endchoice
config MPC8641
bool
- select PPC_INDIRECT_PCI
- select PPC_INDIRECT_PCI_BE
+ select PPC_INDIRECT_PCI_BE if PCI
+ select FSL_PCI if PCI
select PPC_UDBG_16550
select MPIC
default y if MPC8641_HPCN
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 418fd8f..3376c77 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -4,4 +4,3 @@
obj-$(CONFIG_SMP) += mpc86xx_smp.o
obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o
-obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
deleted file mode 100644
index 73cd5b0..0000000
--- a/arch/powerpc/platforms/86xx/pci.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * MPC86XX pci setup code
- *
- * Recode: ZHANG WEI <wei.zhang@freescale.com>
- * Initial author: Xianghua Xiao <x.xiao@freescale.com>
- *
- * Copyright 2006 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/serial.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pcie.h>
-
-#include "mpc86xx.h"
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
-#else
-#define DBG(fmt, args...)
-#endif
-
-struct pcie_outbound_window_regs {
- uint pexotar; /* 0x.0 - PCI Express outbound translation address register */
- uint pexotear; /* 0x.4 - PCI Express outbound translation extended address register */
- uint pexowbar; /* 0x.8 - PCI Express outbound window base address register */
- char res1[4];
- uint pexowar; /* 0x.10 - PCI Express outbound window attributes register */
- char res2[12];
-};
-
-struct pcie_inbound_window_regs {
- uint pexitar; /* 0x.0 - PCI Express inbound translation address register */
- char res1[4];
- uint pexiwbar; /* 0x.8 - PCI Express inbound window base address register */
- uint pexiwbear; /* 0x.c - PCI Express inbound window base extended address register */
- uint pexiwar; /* 0x.10 - PCI Express inbound window attributes register */
- char res2[12];
-};
-
-static void __init setup_pcie_atmu(struct pci_controller *hose, struct resource *rsrc)
-{
- volatile struct ccsr_pex *pcie;
- volatile struct pcie_outbound_window_regs *pcieow;
- volatile struct pcie_inbound_window_regs *pcieiw;
- int i = 0;
-
- DBG("PCIE memory map start 0x%x, size 0x%x\n", rsrc->start,
- rsrc->end - rsrc->start + 1);
- pcie = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
-
- /* Disable all windows (except pexowar0 since its ignored) */
- pcie->pexowar1 = 0;
- pcie->pexowar2 = 0;
- pcie->pexowar3 = 0;
- pcie->pexowar4 = 0;
- pcie->pexiwar1 = 0;
- pcie->pexiwar2 = 0;
- pcie->pexiwar3 = 0;
-
- pcieow = (struct pcie_outbound_window_regs *)&pcie->pexotar1;
- pcieiw = (struct pcie_inbound_window_regs *)&pcie->pexitar1;
-
- /* Setup outbound MEM window */
- for(i = 0; i < 3; i++)
- if (hose->mem_resources[i].flags & IORESOURCE_MEM){
- DBG("PCIE MEM resource start 0x%08x, size 0x%08x.\n",
- hose->mem_resources[i].start,
- hose->mem_resources[i].end
- - hose->mem_resources[i].start + 1);
- pcieow->pexotar = (hose->mem_resources[i].start) >> 12
- & 0x000fffff;
- pcieow->pexotear = 0;
- pcieow->pexowbar = (hose->mem_resources[i].start) >> 12
- & 0x000fffff;
- /* Enable, Mem R/W */
- pcieow->pexowar = 0x80044000 |
- (__ilog2(hose->mem_resources[i].end
- - hose->mem_resources[i].start + 1)
- - 1);
- pcieow++;
- }
-
- /* Setup outbound IO window */
- if (hose->io_resource.flags & IORESOURCE_IO){
- DBG("PCIE IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n",
- hose->io_resource.start,
- hose->io_resource.end - hose->io_resource.start + 1,
- hose->io_base_phys);
- pcieow->pexotar = (hose->io_resource.start) >> 12 & 0x000fffff;
- pcieow->pexotear = 0;
- pcieow->pexowbar = (hose->io_base_phys) >> 12 & 0x000fffff;
- /* Enable, IO R/W */
- pcieow->pexowar = 0x80088000 | (__ilog2(hose->io_resource.end
- - hose->io_resource.start + 1) - 1);
- }
-
- /* Setup 2G inbound Memory Window @ 0 */
- pcieiw->pexitar = 0x00000000;
- pcieiw->pexiwbar = 0x00000000;
- /* Enable, Prefetch, Local Mem, Snoop R/W, 2G */
- pcieiw->pexiwar = 0xa0f5501e;
-}
-
-static void __init
-mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
-{
- u16 cmd;
-
- DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n",
- pcie_offset, pcie_size);
-
- early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
- cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
- | PCI_COMMAND_IO;
- early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
-
- early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
-}
-
-static void __devinit quirk_fsl_pcie_transparent(struct pci_dev *dev)
-{
- struct resource *res;
- int i, res_idx = PCI_BRIDGE_RESOURCES;
- struct pci_controller *hose;
-
- /*
- * Make the bridge be transparent.
- */
- dev->transparent = 1;
-
- hose = pci_bus_to_host(dev->bus);
- if (!hose) {
- printk(KERN_ERR "Can't find hose for bus %d\n",
- dev->bus->number);
- return;
- }
-
- if (hose->io_resource.flags) {
- res = &dev->resource[res_idx++];
- res->start = hose->io_resource.start;
- res->end = hose->io_resource.end;
- res->flags = hose->io_resource.flags;
- }
-
- for (i = 0; i < 3; i++) {
- res = &dev->resource[res_idx + i];
- res->start = hose->mem_resources[i].start;
- res->end = hose->mem_resources[i].end;
- res->flags = hose->mem_resources[i].flags;
- }
-}
-
-
-DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7010, quirk_fsl_pcie_transparent);
-DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7011, quirk_fsl_pcie_transparent);
-
-#define PCIE_LTSSM 0x404 /* PCIe Link Training and Status */
-#define PCIE_LTSSM_L0 0x16 /* L0 state */
-
-int __init mpc86xx_add_bridge(struct device_node *dev)
-{
- int len;
- struct pci_controller *hose;
- struct resource rsrc;
- const int *bus_range;
- int has_address = 0;
- int primary = 0;
- u16 val;
-
- DBG("Adding PCIE host bridge %s\n", dev->full_name);
-
- /* Fetch host bridge registers address */
- has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
-
- /* Get bus range if any */
- bus_range = of_get_property(dev, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int))
- printk(KERN_WARNING "Can't get bus-range for %s, assume"
- " bus 0\n", dev->full_name);
-
- pci_assign_all_buses = 1;
- hose = pcibios_alloc_controller(dev);
- if (!hose)
- return -ENOMEM;
-
- hose->indirect_type = PPC_INDIRECT_TYPE_EXT_REG |
- PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
-
- hose->first_busno = bus_range ? bus_range[0] : 0x0;
- hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
- setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4);
-
- /* Probe the hose link training status */
- early_read_config_word(hose, 0, 0, PCIE_LTSSM, &val);
- if (val < PCIE_LTSSM_L0)
- return -ENXIO;
-
- /* Setup the PCIE host controller. */
- mpc86xx_setup_pcie(hose, rsrc.start, rsrc.end - rsrc.start + 1);
-
- if ((rsrc.start & 0xfffff) == 0x8000)
- primary = 1;
-
- printk(KERN_INFO "Found MPC86xx PCIE host bridge at 0x%08lx. "
- "Firmware bus number: %d->%d\n",
- (unsigned long) rsrc.start,
- hose->first_busno, hose->last_busno);
-
- DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
- hose, hose->cfg_addr, hose->cfg_data);
-
- /* Interpret the "ranges" property */
- /* This also maps the I/O region and sets isa_io/mem_base */
- pci_process_bridge_OF_ranges(hose, dev, primary);
-
- /* Setup PEX window registers */
- setup_pcie_atmu(hose, &rsrc);
-
- return 0;
-}
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 484eb4e..08ce31e 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_PPC_PMI) += pmi.o
obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
+obj-$(CONFIG_FSL_PCI) += fsl_pci.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
mv64x60-$(CONFIG_PCI) += mv64x60_pci.o
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
new file mode 100644
index 0000000..24ba1b6
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -0,0 +1,238 @@
+/*
+ * MPC86XX pci setup code
+ *
+ * Recode: ZHANG WEI <wei.zhang@freescale.com>
+ * Initial author: Xianghua Xiao <x.xiao@freescale.com>
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/serial.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "../platforms/86xx/mpc86xx.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
+struct pcie_outbound_window_regs {
+ uint pexotar; /* 0x.0 - PCI Express outbound translation address register */
+ uint pexotear; /* 0x.4 - PCI Express outbound translation extended address register */
+ uint pexowbar; /* 0x.8 - PCI Express outbound window base address register */
+ char res1[4];
+ uint pexowar; /* 0x.10 - PCI Express outbound window attributes register */
+ char res2[12];
+};
+
+struct pcie_inbound_window_regs {
+ uint pexitar; /* 0x.0 - PCI Express inbound translation address register */
+ char res1[4];
+ uint pexiwbar; /* 0x.8 - PCI Express inbound window base address register */
+ uint pexiwbear; /* 0x.c - PCI Express inbound window base extended address register */
+ uint pexiwar; /* 0x.10 - PCI Express inbound window attributes register */
+ char res2[12];
+};
+
+static void __init setup_pcie_atmu(struct pci_controller *hose, struct resource *rsrc)
+{
+ volatile struct ccsr_pex *pcie;
+ volatile struct pcie_outbound_window_regs *pcieow;
+ volatile struct pcie_inbound_window_regs *pcieiw;
+ int i = 0;
+
+ DBG("PCIE memory map start 0x%x, size 0x%x\n", rsrc->start,
+ rsrc->end - rsrc->start + 1);
+ pcie = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
+
+ /* Disable all windows (except pexowar0 since its ignored) */
+ pcie->pexowar1 = 0;
+ pcie->pexowar2 = 0;
+ pcie->pexowar3 = 0;
+ pcie->pexowar4 = 0;
+ pcie->pexiwar1 = 0;
+ pcie->pexiwar2 = 0;
+ pcie->pexiwar3 = 0;
+
+ pcieow = (struct pcie_outbound_window_regs *)&pcie->pexotar1;
+ pcieiw = (struct pcie_inbound_window_regs *)&pcie->pexitar1;
+
+ /* Setup outbound MEM window */
+ for(i = 0; i < 3; i++)
+ if (hose->mem_resources[i].flags & IORESOURCE_MEM){
+ DBG("PCIE MEM resource start 0x%08x, size 0x%08x.\n",
+ hose->mem_resources[i].start,
+ hose->mem_resources[i].end
+ - hose->mem_resources[i].start + 1);
+ pcieow->pexotar = (hose->mem_resources[i].start) >> 12
+ & 0x000fffff;
+ pcieow->pexotear = 0;
+ pcieow->pexowbar = (hose->mem_resources[i].start) >> 12
+ & 0x000fffff;
+ /* Enable, Mem R/W */
+ pcieow->pexowar = 0x80044000 |
+ (__ilog2(hose->mem_resources[i].end
+ - hose->mem_resources[i].start + 1)
+ - 1);
+ pcieow++;
+ }
+
+ /* Setup outbound IO window */
+ if (hose->io_resource.flags & IORESOURCE_IO){
+ DBG("PCIE IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n",
+ hose->io_resource.start,
+ hose->io_resource.end - hose->io_resource.start + 1,
+ hose->io_base_phys);
+ pcieow->pexotar = (hose->io_resource.start) >> 12 & 0x000fffff;
+ pcieow->pexotear = 0;
+ pcieow->pexowbar = (hose->io_base_phys) >> 12 & 0x000fffff;
+ /* Enable, IO R/W */
+ pcieow->pexowar = 0x80088000 | (__ilog2(hose->io_resource.end
+ - hose->io_resource.start + 1) - 1);
+ }
+
+ /* Setup 2G inbound Memory Window @ 0 */
+ pcieiw->pexitar = 0x00000000;
+ pcieiw->pexiwbar = 0x00000000;
+ /* Enable, Prefetch, Local Mem, Snoop R/W, 2G */
+ pcieiw->pexiwar = 0xa0f5501e;
+}
+
+static void __init
+mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
+{
+ u16 cmd;
+
+ DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n",
+ pcie_offset, pcie_size);
+
+ early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
+ | PCI_COMMAND_IO;
+ early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
+
+ early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
+}
+
+static void __devinit quirk_fsl_pcie_transparent(struct pci_dev *dev)
+{
+ struct resource *res;
+ int i, res_idx = PCI_BRIDGE_RESOURCES;
+ struct pci_controller *hose;
+
+ /*
+ * Make the bridge be transparent.
+ */
+ dev->transparent = 1;
+
+ hose = pci_bus_to_host(dev->bus);
+ if (!hose) {
+ printk(KERN_ERR "Can't find hose for bus %d\n",
+ dev->bus->number);
+ return;
+ }
+
+ if (hose->io_resource.flags) {
+ res = &dev->resource[res_idx++];
+ res->start = hose->io_resource.start;
+ res->end = hose->io_resource.end;
+ res->flags = hose->io_resource.flags;
+ }
+
+ for (i = 0; i < 3; i++) {
+ res = &dev->resource[res_idx + i];
+ res->start = hose->mem_resources[i].start;
+ res->end = hose->mem_resources[i].end;
+ res->flags = hose->mem_resources[i].flags;
+ }
+}
+
+
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7010, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7011, quirk_fsl_pcie_transparent);
+
+#define PCIE_LTSSM 0x404 /* PCIe Link Training and Status */
+#define PCIE_LTSSM_L0 0x16 /* L0 state */
+
+int __init mpc86xx_add_bridge(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ struct resource rsrc;
+ const int *bus_range;
+ int has_address = 0;
+ int primary = 0;
+ u16 val;
+
+ DBG("Adding PCIE host bridge %s\n", dev->full_name);
+
+ /* Fetch host bridge registers address */
+ has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+ /* Get bus range if any */
+ bus_range = of_get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int))
+ printk(KERN_WARNING "Can't get bus-range for %s, assume"
+ " bus 0\n", dev->full_name);
+
+ pci_assign_all_buses = 1;
+ hose = pcibios_alloc_controller(dev);
+ if (!hose)
+ return -ENOMEM;
+
+ hose->indirect_type = PPC_INDIRECT_TYPE_EXT_REG |
+ PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
+
+ hose->first_busno = bus_range ? bus_range[0] : 0x0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4);
+
+ /* Probe the hose link training status */
+ early_read_config_word(hose, 0, 0, PCIE_LTSSM, &val);
+ if (val < PCIE_LTSSM_L0)
+ return -ENXIO;
+
+ /* Setup the PCIE host controller. */
+ mpc86xx_setup_pcie(hose, rsrc.start, rsrc.end - rsrc.start + 1);
+
+ if ((rsrc.start & 0xfffff) == 0x8000)
+ primary = 1;
+
+ printk(KERN_INFO "Found MPC86xx PCIE host bridge at 0x%08lx. "
+ "Firmware bus number: %d->%d\n",
+ (unsigned long) rsrc.start,
+ hose->first_busno, hose->last_busno);
+
+ DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+ hose, hose->cfg_addr, hose->cfg_data);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(hose, dev, primary);
+
+ /* Setup PEX window registers */
+ setup_pcie_atmu(hose, &rsrc);
+
+ return 0;
+}
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
new file mode 100644
index 0000000..8d9779c
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -0,0 +1,94 @@
+/*
+ * MPC85xx/86xx PCI Express structure define
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __POWERPC_FSL_PCIE_H
+#define __POWERPC_FSL_PCIE_H
+
+/* PCIE Express IO block registers in 85xx/86xx */
+
+struct ccsr_pex {
+ __be32 __iomem pex_config_addr; /* 0x.000 - PCI Express Configuration Address Register */
+ __be32 __iomem pex_config_data; /* 0x.004 - PCI Express Configuration Data Register */
+ u8 __iomem res1[4];
+ __be32 __iomem pex_otb_cpl_tor; /* 0x.00c - PCI Express Outbound completion timeout register */
+ __be32 __iomem pex_conf_tor; /* 0x.010 - PCI Express configuration timeout register */
+ u8 __iomem res2[12];
+ __be32 __iomem pex_pme_mes_dr; /* 0x.020 - PCI Express PME and message detect register */
+ __be32 __iomem pex_pme_mes_disr; /* 0x.024 - PCI Express PME and message disable register */
+ __be32 __iomem pex_pme_mes_ier; /* 0x.028 - PCI Express PME and message interrupt enable register */
+ __be32 __iomem pex_pmcr; /* 0x.02c - PCI Express power management command register */
+ u8 __iomem res3[3024];
+ __be32 __iomem pexotar0; /* 0x.c00 - PCI Express outbound translation address register 0 */
+ __be32 __iomem pexotear0; /* 0x.c04 - PCI Express outbound translation extended address register 0*/
+ u8 __iomem res4[8];
+ __be32 __iomem pexowar0; /* 0x.c10 - PCI Express outbound window attributes register 0*/
+ u8 __iomem res5[12];
+ __be32 __iomem pexotar1; /* 0x.c20 - PCI Express outbound translation address register 1 */
+ __be32 __iomem pexotear1; /* 0x.c24 - PCI Express outbound translation extended address register 1*/
+ __be32 __iomem pexowbar1; /* 0x.c28 - PCI Express outbound window base address register 1*/
+ u8 __iomem res6[4];
+ __be32 __iomem pexowar1; /* 0x.c30 - PCI Express outbound window attributes register 1*/
+ u8 __iomem res7[12];
+ __be32 __iomem pexotar2; /* 0x.c40 - PCI Express outbound translation address register 2 */
+ __be32 __iomem pexotear2; /* 0x.c44 - PCI Express outbound translation extended address register 2*/
+ __be32 __iomem pexowbar2; /* 0x.c48 - PCI Express outbound window base address register 2*/
+ u8 __iomem res8[4];
+ __be32 __iomem pexowar2; /* 0x.c50 - PCI Express outbound window attributes register 2*/
+ u8 __iomem res9[12];
+ __be32 __iomem pexotar3; /* 0x.c60 - PCI Express outbound translation address register 3 */
+ __be32 __iomem pexotear3; /* 0x.c64 - PCI Express outbound translation extended address register 3*/
+ __be32 __iomem pexowbar3; /* 0x.c68 - PCI Express outbound window base address register 3*/
+ u8 __iomem res10[4];
+ __be32 __iomem pexowar3; /* 0x.c70 - PCI Express outbound window attributes register 3*/
+ u8 __iomem res11[12];
+ __be32 __iomem pexotar4; /* 0x.c80 - PCI Express outbound translation address register 4 */
+ __be32 __iomem pexotear4; /* 0x.c84 - PCI Express outbound translation extended address register 4*/
+ __be32 __iomem pexowbar4; /* 0x.c88 - PCI Express outbound window base address register 4*/
+ u8 __iomem res12[4];
+ __be32 __iomem pexowar4; /* 0x.c90 - PCI Express outbound window attributes register 4*/
+ u8 __iomem res13[12];
+ u8 __iomem res14[256];
+ __be32 __iomem pexitar3; /* 0x.da0 - PCI Express inbound translation address register 3 */
+ u8 __iomem res15[4];
+ __be32 __iomem pexiwbar3; /* 0x.da8 - PCI Express inbound window base address register 3 */
+ __be32 __iomem pexiwbear3; /* 0x.dac - PCI Express inbound window base extended address register 3 */
+ __be32 __iomem pexiwar3; /* 0x.db0 - PCI Express inbound window attributes register 3 */
+ u8 __iomem res16[12];
+ __be32 __iomem pexitar2; /* 0x.dc0 - PCI Express inbound translation address register 2 */
+ u8 __iomem res17[4];
+ __be32 __iomem pexiwbar2; /* 0x.dc8 - PCI Express inbound window base address register 2 */
+ __be32 __iomem pexiwbear2; /* 0x.dcc - PCI Express inbound window base extended address register 2 */
+ __be32 __iomem pexiwar2; /* 0x.dd0 - PCI Express inbound window attributes register 2 */
+ u8 __iomem res18[12];
+ __be32 __iomem pexitar1; /* 0x.de0 - PCI Express inbound translation address register 2 */
+ u8 __iomem res19[4];
+ __be32 __iomem pexiwbar1; /* 0x.de8 - PCI Express inbound window base address register 2 */
+ __be32 __iomem pexiwbear1; /* 0x.dec - PCI Express inbound window base extended address register 2 */
+ __be32 __iomem pexiwar1; /* 0x.df0 - PCI Express inbound window attributes register 2 */
+ u8 __iomem res20[12];
+ __be32 __iomem pex_err_dr; /* 0x.e00 - PCI Express error detect register */
+ u8 __iomem res21[4];
+ __be32 __iomem pex_err_en; /* 0x.e08 - PCI Express error interrupt enable register */
+ u8 __iomem res22[4];
+ __be32 __iomem pex_err_disr; /* 0x.e10 - PCI Express error disable register */
+ u8 __iomem res23[12];
+ __be32 __iomem pex_err_cap_stat; /* 0x.e20 - PCI Express error capture status register */
+ u8 __iomem res24[4];
+ __be32 __iomem pex_err_cap_r0; /* 0x.e28 - PCI Express error capture register 0 */
+ __be32 __iomem pex_err_cap_r1; /* 0x.e2c - PCI Express error capture register 0 */
+ __be32 __iomem pex_err_cap_r2; /* 0x.e30 - PCI Express error capture register 0 */
+ __be32 __iomem pex_err_cap_r3; /* 0x.e34 - PCI Express error capture register 0 */
+};
+
+#endif /* __POWERPC_FSL_PCIE_H */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/sysdev/fsl_pcie.h b/arch/powerpc/sysdev/fsl_pcie.h
deleted file mode 100644
index 8d9779c..0000000
--- a/arch/powerpc/sysdev/fsl_pcie.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * MPC85xx/86xx PCI Express structure define
- *
- * Copyright 2007 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __POWERPC_FSL_PCIE_H
-#define __POWERPC_FSL_PCIE_H
-
-/* PCIE Express IO block registers in 85xx/86xx */
-
-struct ccsr_pex {
- __be32 __iomem pex_config_addr; /* 0x.000 - PCI Express Configuration Address Register */
- __be32 __iomem pex_config_data; /* 0x.004 - PCI Express Configuration Data Register */
- u8 __iomem res1[4];
- __be32 __iomem pex_otb_cpl_tor; /* 0x.00c - PCI Express Outbound completion timeout register */
- __be32 __iomem pex_conf_tor; /* 0x.010 - PCI Express configuration timeout register */
- u8 __iomem res2[12];
- __be32 __iomem pex_pme_mes_dr; /* 0x.020 - PCI Express PME and message detect register */
- __be32 __iomem pex_pme_mes_disr; /* 0x.024 - PCI Express PME and message disable register */
- __be32 __iomem pex_pme_mes_ier; /* 0x.028 - PCI Express PME and message interrupt enable register */
- __be32 __iomem pex_pmcr; /* 0x.02c - PCI Express power management command register */
- u8 __iomem res3[3024];
- __be32 __iomem pexotar0; /* 0x.c00 - PCI Express outbound translation address register 0 */
- __be32 __iomem pexotear0; /* 0x.c04 - PCI Express outbound translation extended address register 0*/
- u8 __iomem res4[8];
- __be32 __iomem pexowar0; /* 0x.c10 - PCI Express outbound window attributes register 0*/
- u8 __iomem res5[12];
- __be32 __iomem pexotar1; /* 0x.c20 - PCI Express outbound translation address register 1 */
- __be32 __iomem pexotear1; /* 0x.c24 - PCI Express outbound translation extended address register 1*/
- __be32 __iomem pexowbar1; /* 0x.c28 - PCI Express outbound window base address register 1*/
- u8 __iomem res6[4];
- __be32 __iomem pexowar1; /* 0x.c30 - PCI Express outbound window attributes register 1*/
- u8 __iomem res7[12];
- __be32 __iomem pexotar2; /* 0x.c40 - PCI Express outbound translation address register 2 */
- __be32 __iomem pexotear2; /* 0x.c44 - PCI Express outbound translation extended address register 2*/
- __be32 __iomem pexowbar2; /* 0x.c48 - PCI Express outbound window base address register 2*/
- u8 __iomem res8[4];
- __be32 __iomem pexowar2; /* 0x.c50 - PCI Express outbound window attributes register 2*/
- u8 __iomem res9[12];
- __be32 __iomem pexotar3; /* 0x.c60 - PCI Express outbound translation address register 3 */
- __be32 __iomem pexotear3; /* 0x.c64 - PCI Express outbound translation extended address register 3*/
- __be32 __iomem pexowbar3; /* 0x.c68 - PCI Express outbound window base address register 3*/
- u8 __iomem res10[4];
- __be32 __iomem pexowar3; /* 0x.c70 - PCI Express outbound window attributes register 3*/
- u8 __iomem res11[12];
- __be32 __iomem pexotar4; /* 0x.c80 - PCI Express outbound translation address register 4 */
- __be32 __iomem pexotear4; /* 0x.c84 - PCI Express outbound translation extended address register 4*/
- __be32 __iomem pexowbar4; /* 0x.c88 - PCI Express outbound window base address register 4*/
- u8 __iomem res12[4];
- __be32 __iomem pexowar4; /* 0x.c90 - PCI Express outbound window attributes register 4*/
- u8 __iomem res13[12];
- u8 __iomem res14[256];
- __be32 __iomem pexitar3; /* 0x.da0 - PCI Express inbound translation address register 3 */
- u8 __iomem res15[4];
- __be32 __iomem pexiwbar3; /* 0x.da8 - PCI Express inbound window base address register 3 */
- __be32 __iomem pexiwbear3; /* 0x.dac - PCI Express inbound window base extended address register 3 */
- __be32 __iomem pexiwar3; /* 0x.db0 - PCI Express inbound window attributes register 3 */
- u8 __iomem res16[12];
- __be32 __iomem pexitar2; /* 0x.dc0 - PCI Express inbound translation address register 2 */
- u8 __iomem res17[4];
- __be32 __iomem pexiwbar2; /* 0x.dc8 - PCI Express inbound window base address register 2 */
- __be32 __iomem pexiwbear2; /* 0x.dcc - PCI Express inbound window base extended address register 2 */
- __be32 __iomem pexiwar2; /* 0x.dd0 - PCI Express inbound window attributes register 2 */
- u8 __iomem res18[12];
- __be32 __iomem pexitar1; /* 0x.de0 - PCI Express inbound translation address register 2 */
- u8 __iomem res19[4];
- __be32 __iomem pexiwbar1; /* 0x.de8 - PCI Express inbound window base address register 2 */
- __be32 __iomem pexiwbear1; /* 0x.dec - PCI Express inbound window base extended address register 2 */
- __be32 __iomem pexiwar1; /* 0x.df0 - PCI Express inbound window attributes register 2 */
- u8 __iomem res20[12];
- __be32 __iomem pex_err_dr; /* 0x.e00 - PCI Express error detect register */
- u8 __iomem res21[4];
- __be32 __iomem pex_err_en; /* 0x.e08 - PCI Express error interrupt enable register */
- u8 __iomem res22[4];
- __be32 __iomem pex_err_disr; /* 0x.e10 - PCI Express error disable register */
- u8 __iomem res23[12];
- __be32 __iomem pex_err_cap_stat; /* 0x.e20 - PCI Express error capture status register */
- u8 __iomem res24[4];
- __be32 __iomem pex_err_cap_r0; /* 0x.e28 - PCI Express error capture register 0 */
- __be32 __iomem pex_err_cap_r1; /* 0x.e2c - PCI Express error capture register 0 */
- __be32 __iomem pex_err_cap_r2; /* 0x.e30 - PCI Express error capture register 0 */
- __be32 __iomem pex_err_cap_r3; /* 0x.e34 - PCI Express error capture register 0 */
-};
-
-#endif /* __POWERPC_FSL_PCIE_H */
-#endif /* __KERNEL__ */
--
1.5.2.2
next prev parent reply other threads:[~2007-07-23 20:50 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-23 20:49 [PATCH 00/25] Freescale PCI/PCIe support/fixup/cleanup Kumar Gala
2007-07-23 20:49 ` Kumar Gala [this message]
2007-07-23 20:49 ` [PATCH 02/25] [POWERPC] Rewrite Freescale PCI/PCIe support for 8{3, 5, 6}xx Kumar Gala
2007-07-23 20:49 ` [PATCH 03/25] [POWERPC] Add the ability to find PCI capabilities early on Kumar Gala
2007-07-23 20:49 ` [PATCH 04/25] [POWERPC] Added indirect quirk to handle PCIe PHB that have issue w/no link Kumar Gala
2007-07-23 20:49 ` [PATCH 05/25] [POWERPC] FSL: Cleanup how we detect if we are a PCIe controller Kumar Gala
2007-07-23 20:49 ` [PATCH 06/25] [POWERPC] Add 8548 CDS PCI express controller node and PCI-X device node Kumar Gala
2007-07-23 20:49 ` [PATCH 07/25] [POWERPC] Update PCI nodes in the 83xx/85xx boards device tree Kumar Gala
2007-07-23 20:49 ` [PATCH 08/25] [POWERPC] Use Freescale pci/pcie common code for 85xx boards Kumar Gala
2007-07-23 20:49 ` [PATCH 09/25] [POWERPC] Add basic PCI node for mpc8568mds board Kumar Gala
2007-07-23 20:49 ` [PATCH 10/25] [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected Kumar Gala
2007-07-23 20:49 ` [PATCH 11/25] [POWERPC] 85xx: Added 8568 PCIe support Kumar Gala
2007-07-23 20:49 ` [PATCH 12/25] [POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDS Kumar Gala
2007-07-23 20:50 ` [PATCH 13/25] [POWERPC] Removed setup_indirect_pci_nomap Kumar Gala
2007-07-23 20:50 ` [PATCH 14/25] [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime Kumar Gala
2007-07-23 20:50 ` [PATCH 15/25] [POWERPC] Add basic PCI/PCI Express support for 8544DS board Kumar Gala
2007-07-23 20:50 ` [PATCH 16/25] [POWERPC] Provide ability to setup P2P bridge registers from struct resource Kumar Gala
2007-07-23 20:50 ` [PATCH 17/25] [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB Kumar Gala
2007-07-23 20:50 ` [PATCH 18/25] [POWERPC] FSL: Add support for PCI-X controllers Kumar Gala
2007-07-23 20:50 ` [PATCH 19/25] [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line Kumar Gala
2007-07-23 20:50 ` [PATCH 20/25] [POWERPC] 85xxCDS: Make sure restart resets the PCI bus Kumar Gala
2007-07-23 20:50 ` [PATCH 21/25] [POWERPC] 85xxCDS: Delay 8259 cascade hookup Kumar Gala
2007-07-23 20:50 ` [PATCH 22/25] [POWERPC] 85xxCDS: Misc 8548 PCI Corrections Kumar Gala
2007-07-23 20:50 ` [PATCH 23/25] [POWERPC] 85xxCDS: MPC8548 DTS cleanup Kumar Gala
2007-07-23 20:50 ` [PATCH 24/25] [POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs Kumar Gala
2007-07-23 20:50 ` [PATCH 25/25] [POWERPC] 85xx: Added needed MPC85xx PCI " Kumar Gala
2007-07-23 21:30 ` [PATCH 23/25] [POWERPC] 85xxCDS: MPC8548 DTS cleanup Scott Wood
2007-07-24 11:52 ` [PATCH 21/25] [POWERPC] 85xxCDS: Delay 8259 cascade hookup Paul Mackerras
2007-07-24 15:34 ` Kumar Gala
2007-07-24 1:48 ` [PATCH 19/25] [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line Benjamin Herrenschmidt
2007-07-24 2:47 ` Kumar Gala
2007-07-24 3:41 ` Kumar Gala
2007-07-24 1:45 ` [PATCH 16/25] [POWERPC] Provide ability to setup P2P bridge registers from struct resource Benjamin Herrenschmidt
2007-07-24 1:43 ` [PATCH 14/25] [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime Benjamin Herrenschmidt
2007-07-24 2:30 ` Kumar Gala
2007-07-24 1:40 ` [PATCH 13/25] [POWERPC] Removed setup_indirect_pci_nomap Benjamin Herrenschmidt
2007-07-24 1:39 ` [PATCH 04/25] [POWERPC] Added indirect quirk to handle PCIe PHB that have issue w/no link Benjamin Herrenschmidt
2007-07-24 2:28 ` Kumar Gala
2007-07-24 1:37 ` [PATCH 03/25] [POWERPC] Add the ability to find PCI capabilities early on Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1185223813693-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.