From: Kumar Gala <galak@kernel.crashing.org>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
linuxppc-dev@ozlabs.org
Cc: York Sun <yorksun@freescale.com>
Subject: [PATCH 15/25] [POWERPC] Add basic PCI/PCI Express support for 8544DS board
Date: Mon, 23 Jul 2007 15:50:02 -0500 [thread overview]
Message-ID: <11852238353292-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <11852238333649-git-send-email-galak@kernel.crashing.org>
From: Roy Zang <tie-fei.zang@freescale.com>
Add basic support for the PCIe PHB and enable the ULI bridge.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/mpc8544ds.dts | 211 ++++++++++++++++++
arch/powerpc/configs/mpc8544_ds_defconfig | 333 ++++++++++++++++++-----------
arch/powerpc/platforms/85xx/Kconfig | 1 +
arch/powerpc/platforms/85xx/mpc8544_ds.c | 241 +++++++++++++++++++++-
arch/powerpc/sysdev/fsl_pci.c | 2 +
5 files changed, 662 insertions(+), 126 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 8285925..4a900c6 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -137,6 +137,217 @@
interrupt-parent = <&mpic>;
};
+ pci@8000 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x11 J17 Slot 1 */
+ 8800 0 0 1 &mpic 2 1
+ 8800 0 0 2 &mpic 3 1
+ 8800 0 0 3 &mpic 4 1
+ 8800 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x12 J16 Slot 2 */
+
+ 9000 0 0 1 &mpic 3 1
+ 9000 0 0 2 &mpic 4 1
+ 9000 0 0 3 &mpic 2 1
+ 9000 0 0 4 &mpic 1 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 e2000000 0 00800000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ };
+
+ pcie@9000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <9000 1000>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 90000000 90000000 0 10000000
+ 01000000 0 00000000 e3000000 0 00800000>;
+ clock-frequency = <1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <1a 2>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 4 1
+ 0000 0 0 2 &mpic 5 1
+ 0000 0 0 3 &mpic 6 1
+ 0000 0 0 4 &mpic 7 1
+ >;
+ };
+
+ pcie@a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <a000 1000>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 a0000000 a0000000 0 10000000
+ 01000000 0 00000000 e2800000 0 00800000>;
+ clock-frequency = <1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <19 2>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 0 1
+ 0000 0 0 2 &mpic 1 1
+ 0000 0 0 3 &mpic 2 1
+ 0000 0 0 4 &mpic 3 1
+ >;
+ };
+
+ pcie@b000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <b000 1000>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 b0000000 b0000000 0 10000000
+ 01000000 0 00000000 e3800000 0 00800000>;
+ clock-frequency = <1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <1b 2>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ // IDSEL 0x1a
+ d000 0 0 1 &i8259 6 2
+ d000 0 0 2 &i8259 3 2
+ d000 0 0 3 &i8259 4 2
+ d000 0 0 4 &i8259 5 2
+
+ // IDSEL 0x1b
+ d800 0 0 1 &i8259 5 2
+ d800 0 0 2 &i8259 0 0
+ d800 0 0 3 &i8259 0 0
+ d800 0 0 4 &i8259 0 0
+
+ // IDSEL 0x1c USB
+ e000 0 0 1 &i8259 9 2
+ e000 0 0 2 &i8259 a 2
+ e000 0 0 3 &i8259 c 2
+ e000 0 0 4 &i8259 7 2
+
+ // IDSEL 0x1d Audio
+ e800 0 0 1 &i8259 9 2
+ e800 0 0 2 &i8259 a 2
+ e800 0 0 3 &i8259 b 2
+ e800 0 0 4 &i8259 0 0
+
+ // IDSEL 0x1e Legacy
+ f000 0 0 1 &i8259 c 2
+ f000 0 0 2 &i8259 0 0
+ f000 0 0 3 &i8259 0 0
+ f000 0 0 4 &i8259 0 0
+
+ // IDSEL 0x1f IDE/SATA
+ f800 0 0 1 &i8259 6 2
+ f800 0 0 2 &i8259 0 0
+ f800 0 0 3 &i8259 0 0
+ f800 0 0 4 &i8259 0 0
+ >;
+ uli1575@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <02000000 0 b0000000
+ 02000000 0 b0000000
+ 0 10000000
+ 01000000 0 00000000
+ 01000000 0 00000000
+ 0 00080000>;
+
+ pci_bridge@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <02000000 0 b0000000
+ 02000000 0 b0000000
+ 0 20000000
+ 01000000 0 00000000
+ 01000000 0 00000000
+ 0 00100000>;
+
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <f000 0 0 0 0>;
+ ranges = <1 0 01000000 0 0
+ 00001000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <1 20 2
+ 1 a0 2
+ 1 4d0 2>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ built-in;
+ compatible = "chrp,iic";
+ interrupts = <9 2>;
+ interrupt-parent =
+ <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <1 60 1 1 64 1>;
+ interrupts = <1 3 c 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible =
+ "pnpPNP,b00";
+ reg = <1 70 2>;
+ };
+
+ gpio@400 {
+ reg = <1 400 80>;
+ };
+ };
+ };
+ };
+
+ };
+
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/mpc8544_ds_defconfig
index c40a25a..7995231 100644
--- a/arch/powerpc/configs/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/mpc8544_ds_defconfig
@@ -1,9 +1,26 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc7
-# Sun Jul 1 23:56:58 2007
+# Linux kernel version: 2.6.22
+# Fri Jul 20 14:09:13 2007
#
# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_85xx=y
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
+# CONFIG_SPE is not set
+# CONFIG_PPC_MM_SLICES is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
@@ -14,6 +31,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
@@ -25,28 +43,8 @@ CONFIG_PPC_UDBG_16550=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
-
-#
-# Processor support
-#
-# CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_85xx=y
-CONFIG_E500=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-# CONFIG_SPE is not set
-# CONFIG_PPC_MM_SLICES is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -63,13 +61,12 @@ CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_IPC_NS=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
@@ -86,7 +83,7 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
@@ -105,24 +102,17 @@ CONFIG_SLAB=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -153,7 +143,7 @@ CONFIG_MPC8544_DS=y
CONFIG_MPC85xx=y
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_I8259=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
@@ -191,6 +181,8 @@ CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="root=/dev/sda3 rw console=ttyS0,115200"
@@ -205,15 +197,21 @@ CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
#
# Advanced setup
@@ -254,7 +252,6 @@ CONFIG_ASK_IP_FIB_HASH=y
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
@@ -330,6 +327,7 @@ CONFIG_FIB_RULES=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -340,45 +338,35 @@ CONFIG_FIB_RULES=y
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
# CONFIG_IDE is not set
#
@@ -386,6 +374,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@@ -422,25 +411,120 @@ CONFIG_SCSI_WAIT_SCAN=m
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
#
-# Multi-device support (RAID and LVM)
+# Fusion MPT device support
#
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
-# Network device support
+# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
@@ -454,17 +538,44 @@ CONFIG_PHYLIB=y
CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
CONFIG_GIANFAR=y
CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TR is not set
#
# Wireless LAN
@@ -472,21 +583,16 @@ CONFIG_NETDEV_10000=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -521,6 +627,7 @@ CONFIG_INPUT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
@@ -539,6 +646,7 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
@@ -550,14 +658,11 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
@@ -565,12 +670,12 @@ CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
@@ -578,11 +683,8 @@ CONFIG_GEN_RTC_X=y
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
#
@@ -655,19 +757,14 @@ CONFIG_DUMMY_CONSOLE=y
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -691,14 +788,7 @@ CONFIG_HID=y
#
# LED Triggers
#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
+# CONFIG_INFINIBAND is not set
#
# Real Time Clock
@@ -719,19 +809,13 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_TEST is not set
#
-# I2C RTC drivers
-#
-
-#
-# SPI RTC drivers
-#
-
-#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -752,6 +836,11 @@ CONFIG_RTC_INTF_DEV=y
#
#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -859,7 +948,6 @@ CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -941,6 +1029,7 @@ CONFIG_BITREVERSE=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
@@ -965,6 +1054,7 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
@@ -996,10 +1086,6 @@ CONFIG_FORCED_INLINING=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
@@ -1038,7 +1124,4 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_HW=y
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 4661fcc..99bb74d 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -30,6 +30,7 @@ config MPC85xx_MDS
config MPC8544_DS
bool "Freescale MPC8544 DS"
+ select PPC_I8259
select DEFAULT_UIMAGE
help
This option enables support for the MPC8544 DS board
diff --git a/arch/powerpc/platforms/85xx/mpc8544_ds.c b/arch/powerpc/platforms/85xx/mpc8544_ds.c
index 6fb90aa..4905f6f 100644
--- a/arch/powerpc/platforms/85xx/mpc8544_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8544_ds.c
@@ -2,6 +2,8 @@
* MPC8544 DS Board Setup
*
* Author Xianghua Xiao (x.xiao@freescale.com)
+ * Roy Zang <tie-fei.zang@freescale.com>
+ * - Add PCI/PCI Exprees support
* Copyright 2007 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
@@ -12,13 +14,16 @@
#include <linux/stddef.h>
#include <linux/kernel.h>
+#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
+#include <linux/interrupt.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
@@ -27,6 +32,7 @@
#include <asm/i8259.h>
#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
#include "mpc85xx.h"
#undef DEBUG
@@ -37,6 +43,17 @@
#define DBG(fmt, args...)
#endif
+#ifdef CONFIG_PPC_I8259
+static void mpc8544_8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int cascade_irq = i8259_irq();
+
+ if (cascade_irq != NO_IRQ) {
+ generic_handle_irq(cascade_irq);
+ }
+ desc->chip->eoi(irq);
+}
+#endif /* CONFIG_PPC_I8259 */
void __init mpc8544_ds_pic_init(void)
{
@@ -96,19 +113,240 @@ void __init mpc8544_ds_pic_init(void)
#endif /* CONFIG_PPC_I8259 */
}
+#ifdef CONFIG_PCI
+enum pirq { PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH };
+
+/*
+ * Value in table -- IRQ number
+ */
+const unsigned char uli1575_irq_route_table[16] = {
+ 0, /* 0: Reserved */
+ 0x8,
+ 0, /* 2: Reserved */
+ 0x2,
+ 0x4,
+ 0x5,
+ 0x7,
+ 0x6,
+ 0, /* 8: Reserved */
+ 0x1,
+ 0x3,
+ 0x9,
+ 0xb,
+ 0, /* 13: Reserved */
+ 0xd,
+ 0xf,
+};
+
+static int __devinit
+get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
+{
+ struct of_irq oirq;
+ u32 laddr[3];
+ struct device_node *hosenode = hose ? hose->arch_data : NULL;
+
+ if (!hosenode)
+ return -EINVAL;
+
+ laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
+ laddr[1] = laddr[2] = 0;
+ of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
+ DBG("mpc8544_ds: pci irq addr %x, slot %d, pin %d, irq %d\n",
+ laddr[0], slot, pin, oirq.specifier[0]);
+ return oirq.specifier[0];
+}
+
+/*8259*/
+static void __devinit quirk_uli1575(struct pci_dev *dev)
+{
+ unsigned short temp;
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ unsigned char irq2pin[16];
+ unsigned long pirq_map_word = 0;
+ u32 irq;
+ int i;
+
+ /*
+ * ULI1575 interrupts route setup
+ */
+ memset(irq2pin, 0, 16); /* Initialize default value 0 */
+
+ irq2pin[6]=PIRQA+3; /* enabled mapping for IRQ6 to PIRQD, used by SATA */
+
+ /*
+ * PIRQE -> PIRQF mapping set manually
+ *
+ * IRQ pin IRQ#
+ * PIRQE ---- 9
+ * PIRQF ---- 10
+ * PIRQG ---- 11
+ * PIRQH ---- 12
+ */
+ for (i = 0; i < 4; i++)
+ irq2pin[i + 9] = PIRQE + i;
+
+ /* Set IRQ-PIRQ Mapping to ULI1575 */
+ for (i = 0; i < 16; i++)
+ if (irq2pin[i])
+ pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
+ << ((irq2pin[i] - PIRQA) * 4);
+
+ pirq_map_word |= 1<<26; /* disable INTx in EP mode*/
+
+ /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
+ DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n",
+ (int)pirq_map_word);
+ pci_write_config_dword(dev, 0x48, pirq_map_word);
+
+#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \
+ do { \
+ int irq; \
+ irq = get_pci_irq_from_of(hose, slot, pin); \
+ if (irq > 0 && irq < 16) \
+ pci_write_config_byte(dev, reg, irq2pin[irq]); \
+ else \
+ printk(KERN_WARNING "ULI1575 device" \
+ "(slot %d, pin %d) irq %d is invalid.\n", \
+ slot, pin, irq); \
+ } while(0)
+
+ /* USB 1.1 OHCI controller 1, slot 28, pin 1 */
+ ULI1575_SET_DEV_IRQ(28, 1, 0x86);
+
+ /* USB 1.1 OHCI controller 2, slot 28, pin 2 */
+ ULI1575_SET_DEV_IRQ(28, 2, 0x87);
+
+ /* USB 1.1 OHCI controller 3, slot 28, pin 3 */
+ ULI1575_SET_DEV_IRQ(28, 3, 0x88);
+
+ /* USB 2.0 controller, slot 28, pin 4 */
+ irq = get_pci_irq_from_of(hose, 28, 4);
+ if (irq >= 0 && irq <= 15)
+ pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);
+
+ /* Audio controller, slot 29, pin 1 */
+ ULI1575_SET_DEV_IRQ(29, 1, 0x8a);
+
+ /* Modem controller, slot 29, pin 2 */
+ ULI1575_SET_DEV_IRQ(29, 2, 0x8b);
+
+ /* HD audio controller, slot 29, pin 3 */
+ ULI1575_SET_DEV_IRQ(29, 3, 0x8c);
+
+ /* SMB interrupt: slot 30, pin 1 */
+ ULI1575_SET_DEV_IRQ(30, 1, 0x8e);
+
+ /* PMU ACPI SCI interrupt: slot 30, pin 2 */
+ ULI1575_SET_DEV_IRQ(30, 2, 0x8f);
+
+ /* Serial ATA interrupt: slot 31, pin 1 */
+ ULI1575_SET_DEV_IRQ(31, 1, 0x8d);
+
+ /* Primary PATA IDE IRQ: 14
+ * Secondary PATA IDE IRQ: 15
+ */
+ pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
+ pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);
+
+ /* Set IRQ14 and IRQ15 to legacy IRQs */
+ pci_read_config_word(dev, 0x46, &temp);
+ temp |= 0xc000;
+ pci_write_config_word(dev, 0x46, temp);
+
+ /* Set i8259 interrupt trigger
+ * IRQ 3: Level
+ * IRQ 4: Level
+ * IRQ 5: Level
+ * IRQ 6: Level
+ * IRQ 7: Level
+ * IRQ 9: Level
+ * IRQ 10: Level
+ * IRQ 11: Level
+ * IRQ 12: Level
+ * IRQ 14: Edge
+ * IRQ 15: Edge
+ */
+ outb(0xfa, 0x4d0);
+ outb(0x1e, 0x4d1);
+
+#undef ULI1575_SET_DEV_IRQ
+}
+
+/* SATA */
+static void __devinit quirk_uli5288(struct pci_dev *dev)
+{
+ unsigned char c;
+
+ pci_read_config_byte(dev, 0x83, &c);
+ c |= 0x80; /* read/write lock */
+ pci_write_config_byte(dev, 0x83, c);
+
+ pci_write_config_byte(dev, 0x09, 0x01); /* Base class code: storage */
+ pci_write_config_byte(dev, 0x0a, 0x06); /* IDE disk */
+
+ pci_read_config_byte(dev, 0x83, &c);
+ c &= 0x7f;
+ pci_write_config_byte(dev, 0x83, c);
+
+ pci_read_config_byte(dev, 0x84, &c);
+ c |= 0x01; /* emulated PATA mode enabled */
+ pci_write_config_byte(dev, 0x84, c);
+}
+
+/* PATA */
+static void __devinit quirk_uli5229(struct pci_dev *dev)
+{
+ unsigned short temp;
+ pci_write_config_word(dev, 0x04, 0x0405); /* MEM IO MSI */
+ pci_read_config_word(dev, 0x4a, &temp);
+ temp |= 0x1000; /* Enable Native IRQ 14/15 */
+ pci_write_config_word(dev, 0x4a, temp);
+}
+
+/*Bridge*/
+static void __devinit early_uli5249(struct pci_dev *dev)
+{
+ unsigned char temp;
+ pci_write_config_word(dev, 0x04, 0x0007); /* mem access */
+ pci_read_config_byte(dev, 0x7c, &temp);
+ pci_write_config_byte(dev, 0x7c, 0x80); /* R/W lock control */
+ pci_write_config_byte(dev, 0x09, 0x01); /* set as pci-pci bridge */
+ pci_write_config_byte(dev, 0x7c, temp); /* restore pci bus debug control */
+ dev->class |= 0x1;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
+#endif /* CONFIG_PCI */
/*
* Setup the architecture
*/
static void __init mpc8544_ds_setup_arch(void)
{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+#endif
+
if (ppc_md.progress)
ppc_md.progress("mpc8544_ds_setup_arch()", 0);
+#ifdef CONFIG_PCI
+ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
+ struct resource rsrc;
+ of_address_to_resource(np, 0, &rsrc);
+ if ((rsrc.start & 0xfffff) == 0xb000)
+ fsl_add_bridge(np, 1);
+ else
+ fsl_add_bridge(np, 0);
+ }
+#endif
+
printk("MPC8544 DS board from Freescale Semiconductor\n");
}
-
/*
* Called very early, device-tree isn't unflattened
*/
@@ -124,6 +362,7 @@ define_machine(mpc8544_ds) {
.probe = mpc8544_ds_probe,
.setup_arch = mpc8544_ds_setup_arch,
.init_IRQ = mpc8544_ds_pic_init,
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
.get_irq = mpic_get_irq,
.restart = mpc85xx_restart,
.calibrate_decr = generic_calibrate_decr,
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 1426642..f51fedf 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -226,5 +226,7 @@ DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0020, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0021, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0024, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0025, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0030, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0031, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7010, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7011, quirk_fsl_pcie_transparent);
--
1.5.2.2
next prev parent reply other threads:[~2007-07-23 20:51 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-23 20:49 [PATCH 00/25] Freescale PCI/PCIe support/fixup/cleanup Kumar Gala
2007-07-23 20:49 ` [PATCH 01/25] [POWERPC] Create common fsl pci/e files based on 86xx platforms Kumar Gala
2007-07-23 20:49 ` [PATCH 02/25] [POWERPC] Rewrite Freescale PCI/PCIe support for 8{3, 5, 6}xx Kumar Gala
2007-07-23 20:49 ` [PATCH 03/25] [POWERPC] Add the ability to find PCI capabilities early on Kumar Gala
2007-07-23 20:49 ` [PATCH 04/25] [POWERPC] Added indirect quirk to handle PCIe PHB that have issue w/no link Kumar Gala
2007-07-23 20:49 ` [PATCH 05/25] [POWERPC] FSL: Cleanup how we detect if we are a PCIe controller Kumar Gala
2007-07-23 20:49 ` [PATCH 06/25] [POWERPC] Add 8548 CDS PCI express controller node and PCI-X device node Kumar Gala
2007-07-23 20:49 ` [PATCH 07/25] [POWERPC] Update PCI nodes in the 83xx/85xx boards device tree Kumar Gala
2007-07-23 20:49 ` [PATCH 08/25] [POWERPC] Use Freescale pci/pcie common code for 85xx boards Kumar Gala
2007-07-23 20:49 ` [PATCH 09/25] [POWERPC] Add basic PCI node for mpc8568mds board Kumar Gala
2007-07-23 20:49 ` [PATCH 10/25] [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected Kumar Gala
2007-07-23 20:49 ` [PATCH 11/25] [POWERPC] 85xx: Added 8568 PCIe support Kumar Gala
2007-07-23 20:49 ` [PATCH 12/25] [POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDS Kumar Gala
2007-07-23 20:50 ` [PATCH 13/25] [POWERPC] Removed setup_indirect_pci_nomap Kumar Gala
2007-07-23 20:50 ` [PATCH 14/25] [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime Kumar Gala
2007-07-23 20:50 ` Kumar Gala [this message]
2007-07-23 20:50 ` [PATCH 16/25] [POWERPC] Provide ability to setup P2P bridge registers from struct resource Kumar Gala
2007-07-23 20:50 ` [PATCH 17/25] [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB Kumar Gala
2007-07-23 20:50 ` [PATCH 18/25] [POWERPC] FSL: Add support for PCI-X controllers Kumar Gala
2007-07-23 20:50 ` [PATCH 19/25] [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line Kumar Gala
2007-07-23 20:50 ` [PATCH 20/25] [POWERPC] 85xxCDS: Make sure restart resets the PCI bus Kumar Gala
2007-07-23 20:50 ` [PATCH 21/25] [POWERPC] 85xxCDS: Delay 8259 cascade hookup Kumar Gala
2007-07-23 20:50 ` [PATCH 22/25] [POWERPC] 85xxCDS: Misc 8548 PCI Corrections Kumar Gala
2007-07-23 20:50 ` [PATCH 23/25] [POWERPC] 85xxCDS: MPC8548 DTS cleanup Kumar Gala
2007-07-23 20:50 ` [PATCH 24/25] [POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs Kumar Gala
2007-07-23 20:50 ` [PATCH 25/25] [POWERPC] 85xx: Added needed MPC85xx PCI " Kumar Gala
2007-07-23 21:30 ` [PATCH 23/25] [POWERPC] 85xxCDS: MPC8548 DTS cleanup Scott Wood
2007-07-24 11:52 ` [PATCH 21/25] [POWERPC] 85xxCDS: Delay 8259 cascade hookup Paul Mackerras
2007-07-24 15:34 ` Kumar Gala
2007-07-24 1:48 ` [PATCH 19/25] [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line Benjamin Herrenschmidt
2007-07-24 2:47 ` Kumar Gala
2007-07-24 3:41 ` Kumar Gala
2007-07-24 1:45 ` [PATCH 16/25] [POWERPC] Provide ability to setup P2P bridge registers from struct resource Benjamin Herrenschmidt
2007-07-24 1:43 ` [PATCH 14/25] [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime Benjamin Herrenschmidt
2007-07-24 2:30 ` Kumar Gala
2007-07-24 1:40 ` [PATCH 13/25] [POWERPC] Removed setup_indirect_pci_nomap Benjamin Herrenschmidt
2007-07-24 1:39 ` [PATCH 04/25] [POWERPC] Added indirect quirk to handle PCIe PHB that have issue w/no link Benjamin Herrenschmidt
2007-07-24 2:28 ` Kumar Gala
2007-07-24 1:37 ` [PATCH 03/25] [POWERPC] Add the ability to find PCI capabilities early on Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11852238353292-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=yorksun@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.