* installing firmware-imx
@ 2013-03-05 12:34 Thomas Senyk
2013-03-05 16:38 ` Otavio Salvador
0 siblings, 1 reply; 7+ messages in thread
From: Thomas Senyk @ 2013-03-05 12:34 UTC (permalink / raw)
To: meta-freescale
Hi,
I just tried to install the imx6 vpu firmware.
I needed to do:
IMAGE_INSTALL += "firmware-imx-vpu-imx6q"
firmware-imx-vpu or firmware-imx is not working.
.. that way my image is not only fsl-specific (which it already is due to fsl-
codec) but also chip specific.
Not sure I get this right, but the fsl-codecs are useless without the
firmware, right?
If so: maybe the fsl-codecs/gst-fsl-plugin should have a RDEPENDS on firmware-
imx-vpu-<machine>?
Greets
Thomas
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: installing firmware-imx
2013-03-05 12:34 installing firmware-imx Thomas Senyk
@ 2013-03-05 16:38 ` Otavio Salvador
2013-03-05 16:52 ` Thomas Senyk
0 siblings, 1 reply; 7+ messages in thread
From: Otavio Salvador @ 2013-03-05 16:38 UTC (permalink / raw)
To: Thomas Senyk; +Cc: meta-freescale@yoctoproject.org
On Tue, Mar 5, 2013 at 9:34 AM, Thomas Senyk
<thomas.senyk@pelagicore.com> wrote:
> Hi,
>
> I just tried to install the imx6 vpu firmware.
> I needed to do:
> IMAGE_INSTALL += "firmware-imx-vpu-imx6q"
>
> firmware-imx-vpu or firmware-imx is not working.
> .. that way my image is not only fsl-specific (which it already is due to fsl-
> codec) but also chip specific.
>
> Not sure I get this right, but the fsl-codecs are useless without the
> firmware, right?
> If so: maybe the fsl-codecs/gst-fsl-plugin should have a RDEPENDS on firmware-
> imx-vpu-<machine>?
Which image are you using? core-image-base and above ought to have the
right set of firmware out of box.
--
Otavio Salvador O.S. Systems
E-mail: otavio@ossystems.com.br http://www.ossystems.com.br
Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: installing firmware-imx
2013-03-05 16:38 ` Otavio Salvador
@ 2013-03-05 16:52 ` Thomas Senyk
2013-03-05 16:57 ` Otavio Salvador
0 siblings, 1 reply; 7+ messages in thread
From: Thomas Senyk @ 2013-03-05 16:52 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale@yoctoproject.org
On Tue, March 05, 2013 13:38:00 Otavio Salvador wrote:
> On Tue, Mar 5, 2013 at 9:34 AM, Thomas Senyk
>
> <thomas.senyk@pelagicore.com> wrote:
> > Hi,
> >
> > I just tried to install the imx6 vpu firmware.
> > I needed to do:
> > IMAGE_INSTALL += "firmware-imx-vpu-imx6q"
> >
> > firmware-imx-vpu or firmware-imx is not working.
> > .. that way my image is not only fsl-specific (which it already is due to
> > fsl- codec) but also chip specific.
> >
> > Not sure I get this right, but the fsl-codecs are useless without the
> > firmware, right?
> > If so: maybe the fsl-codecs/gst-fsl-plugin should have a RDEPENDS on
> > firmware- imx-vpu-<machine>?
>
> Which image are you using? core-image-base and above ought to have the
> right set of firmware out of box.
Our own using 'inherit core-image'
So it's similar to (/more then) 'core-image-base'
I colleague found that adding packagegroup-base adds the firmware
... is that the right way of doing it?
Greets
Thomas
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: installing firmware-imx
2013-03-05 16:52 ` Thomas Senyk
@ 2013-03-05 16:57 ` Otavio Salvador
2013-03-05 17:35 ` Thomas Senyk
0 siblings, 1 reply; 7+ messages in thread
From: Otavio Salvador @ 2013-03-05 16:57 UTC (permalink / raw)
To: Thomas Senyk; +Cc: meta-freescale@yoctoproject.org
On Tue, Mar 5, 2013 at 1:52 PM, Thomas Senyk
<thomas.senyk@pelagicore.com> wrote:
> On Tue, March 05, 2013 13:38:00 Otavio Salvador wrote:
>> On Tue, Mar 5, 2013 at 9:34 AM, Thomas Senyk
>>
>> <thomas.senyk@pelagicore.com> wrote:
>> > Hi,
>> >
>> > I just tried to install the imx6 vpu firmware.
>> > I needed to do:
>> > IMAGE_INSTALL += "firmware-imx-vpu-imx6q"
>> >
>> > firmware-imx-vpu or firmware-imx is not working.
>> > .. that way my image is not only fsl-specific (which it already is due to
>> > fsl- codec) but also chip specific.
>> >
>> > Not sure I get this right, but the fsl-codecs are useless without the
>> > firmware, right?
>> > If so: maybe the fsl-codecs/gst-fsl-plugin should have a RDEPENDS on
>> > firmware- imx-vpu-<machine>?
>>
>> Which image are you using? core-image-base and above ought to have the
>> right set of firmware out of box.
>
> Our own using 'inherit core-image'
> So it's similar to (/more then) 'core-image-base'
>
> I colleague found that adding packagegroup-base adds the firmware
> ... is that the right way of doing it?
Yes; this is the generic way of adding it. However it is automatically
done by every image inheriting core-image. So you must be doing:
IMAGE_INSTALL = "... "
And this is wrong, in this specific case. Please change it to:
CORE_IMAGE_EXTRA_INSTALL += " ... "
--
Otavio Salvador O.S. Systems
E-mail: otavio@ossystems.com.br http://www.ossystems.com.br
Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: installing firmware-imx
2013-03-05 16:57 ` Otavio Salvador
@ 2013-03-05 17:35 ` Thomas Senyk
2013-03-05 17:36 ` Otavio Salvador
0 siblings, 1 reply; 7+ messages in thread
From: Thomas Senyk @ 2013-03-05 17:35 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale@yoctoproject.org
On Tue, March 05, 2013 13:57:51 Otavio Salvador wrote:
> On Tue, Mar 5, 2013 at 1:52 PM, Thomas Senyk
>
> <thomas.senyk@pelagicore.com> wrote:
> > On Tue, March 05, 2013 13:38:00 Otavio Salvador wrote:
> >> On Tue, Mar 5, 2013 at 9:34 AM, Thomas Senyk
> >>
> >> <thomas.senyk@pelagicore.com> wrote:
> >> > Hi,
> >> >
> >> > I just tried to install the imx6 vpu firmware.
> >> > I needed to do:
> >> > IMAGE_INSTALL += "firmware-imx-vpu-imx6q"
> >> >
> >> > firmware-imx-vpu or firmware-imx is not working.
> >> > .. that way my image is not only fsl-specific (which it already is due
> >> > to
> >> > fsl- codec) but also chip specific.
> >> >
> >> > Not sure I get this right, but the fsl-codecs are useless without the
> >> > firmware, right?
> >> > If so: maybe the fsl-codecs/gst-fsl-plugin should have a RDEPENDS on
> >> > firmware- imx-vpu-<machine>?
> >>
> >> Which image are you using? core-image-base and above ought to have the
> >> right set of firmware out of box.
> >
> > Our own using 'inherit core-image'
> > So it's similar to (/more then) 'core-image-base'
> >
> > I colleague found that adding packagegroup-base adds the firmware
> >
> > ... is that the right way of doing it?
>
> Yes; this is the generic way of adding it. However it is automatically
> done by every image inheriting core-image.
Ok, but then their is a bug :)
Our image does(!) 'inherit core-image' but the firmware does not get deployed.
> So you must be doing:
>
> IMAGE_INSTALL = "... "
>
> And this is wrong, in this specific case. Please change it to:
>
> CORE_IMAGE_EXTRA_INSTALL += " ... "
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: installing firmware-imx
2013-03-05 17:35 ` Thomas Senyk
@ 2013-03-05 17:36 ` Otavio Salvador
2013-03-05 17:58 ` Thomas Senyk
0 siblings, 1 reply; 7+ messages in thread
From: Otavio Salvador @ 2013-03-05 17:36 UTC (permalink / raw)
To: Thomas Senyk; +Cc: meta-freescale@yoctoproject.org
On Tue, Mar 5, 2013 at 2:35 PM, Thomas Senyk
<thomas.senyk@pelagicore.com> wrote:
> On Tue, March 05, 2013 13:57:51 Otavio Salvador wrote:
>> On Tue, Mar 5, 2013 at 1:52 PM, Thomas Senyk
>>
>> <thomas.senyk@pelagicore.com> wrote:
>> > On Tue, March 05, 2013 13:38:00 Otavio Salvador wrote:
>> >> On Tue, Mar 5, 2013 at 9:34 AM, Thomas Senyk
>> >>
>> >> <thomas.senyk@pelagicore.com> wrote:
>> >> > Hi,
>> >> >
>> >> > I just tried to install the imx6 vpu firmware.
>> >> > I needed to do:
>> >> > IMAGE_INSTALL += "firmware-imx-vpu-imx6q"
>> >> >
>> >> > firmware-imx-vpu or firmware-imx is not working.
>> >> > .. that way my image is not only fsl-specific (which it already is due
>> >> > to
>> >> > fsl- codec) but also chip specific.
>> >> >
>> >> > Not sure I get this right, but the fsl-codecs are useless without the
>> >> > firmware, right?
>> >> > If so: maybe the fsl-codecs/gst-fsl-plugin should have a RDEPENDS on
>> >> > firmware- imx-vpu-<machine>?
>> >>
>> >> Which image are you using? core-image-base and above ought to have the
>> >> right set of firmware out of box.
>> >
>> > Our own using 'inherit core-image'
>> > So it's similar to (/more then) 'core-image-base'
>> >
>> > I colleague found that adding packagegroup-base adds the firmware
>> >
>> > ... is that the right way of doing it?
>>
>> Yes; this is the generic way of adding it. However it is automatically
>> done by every image inheriting core-image.
>
> Ok, but then their is a bug :)
> Our image does(!) 'inherit core-image' but the firmware does not get deployed.
You must be overriding something, read bellow.
>> So you must be doing:
>>
>> IMAGE_INSTALL = "... "
>>
>> And this is wrong, in this specific case. Please change it to:
>>
>> CORE_IMAGE_EXTRA_INSTALL += " ... "
--
Otavio Salvador O.S. Systems
E-mail: otavio@ossystems.com.br http://www.ossystems.com.br
Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: installing firmware-imx
2013-03-05 17:36 ` Otavio Salvador
@ 2013-03-05 17:58 ` Thomas Senyk
0 siblings, 0 replies; 7+ messages in thread
From: Thomas Senyk @ 2013-03-05 17:58 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale@yoctoproject.org
On Tue, March 05, 2013 14:36:06 Otavio Salvador wrote:
> On Tue, Mar 5, 2013 at 2:35 PM, Thomas Senyk
>
> <thomas.senyk@pelagicore.com> wrote:
> > On Tue, March 05, 2013 13:57:51 Otavio Salvador wrote:
> >> On Tue, Mar 5, 2013 at 1:52 PM, Thomas Senyk
> >>
> >> <thomas.senyk@pelagicore.com> wrote:
> >> > On Tue, March 05, 2013 13:38:00 Otavio Salvador wrote:
> >> >> On Tue, Mar 5, 2013 at 9:34 AM, Thomas Senyk
> >> >>
> >> >> <thomas.senyk@pelagicore.com> wrote:
> >> >> > Hi,
> >> >> >
> >> >> > I just tried to install the imx6 vpu firmware.
> >> >> > I needed to do:
> >> >> > IMAGE_INSTALL += "firmware-imx-vpu-imx6q"
> >> >> >
> >> >> > firmware-imx-vpu or firmware-imx is not working.
> >> >> > .. that way my image is not only fsl-specific (which it already is
> >> >> > due
> >> >> > to
> >> >> > fsl- codec) but also chip specific.
> >> >> >
> >> >> > Not sure I get this right, but the fsl-codecs are useless without
> >> >> > the
> >> >> > firmware, right?
> >> >> > If so: maybe the fsl-codecs/gst-fsl-plugin should have a RDEPENDS on
> >> >> > firmware- imx-vpu-<machine>?
> >> >>
> >> >> Which image are you using? core-image-base and above ought to have the
> >> >> right set of firmware out of box.
> >> >
> >> > Our own using 'inherit core-image'
> >> > So it's similar to (/more then) 'core-image-base'
> >> >
> >> > I colleague found that adding packagegroup-base adds the firmware
> >> >
> >> > ... is that the right way of doing it?
> >>
> >> Yes; this is the generic way of adding it. However it is automatically
> >> done by every image inheriting core-image.
> >
> > Ok, but then their is a bug :)
> > Our image does(!) 'inherit core-image' but the firmware does not get
> > deployed.
> You must be overriding something, read bellow.
Ah! Now I got you :)
Thanks for the Tip! I'll try
>
> >> So you must be doing:
> >>
> >> IMAGE_INSTALL = "... "
> >>
> >> And this is wrong, in this specific case. Please change it to:
> >>
> >> CORE_IMAGE_EXTRA_INSTALL += " ... "
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-03-05 17:58 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-05 12:34 installing firmware-imx Thomas Senyk
2013-03-05 16:38 ` Otavio Salvador
2013-03-05 16:52 ` Thomas Senyk
2013-03-05 16:57 ` Otavio Salvador
2013-03-05 17:35 ` Thomas Senyk
2013-03-05 17:36 ` Otavio Salvador
2013-03-05 17:58 ` Thomas Senyk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.