From: jamal <hadi@cyberus.ca>
To: Michael Chan <mchan@broadcom.com>
Cc: Matt Carlson <mcarlson@broadcom.com>, netdev <netdev@vger.kernel.org>
Subject: Re: [PATCH][TG3]Some cleanups
Date: Sun, 07 Oct 2007 11:12:21 -0400 [thread overview]
Message-ID: <1191769941.4394.1.camel@localhost> (raw)
In-Reply-To: <1191417527.4357.25.camel@localhost>
[-- Attachment #1: Type: text/plain, Size: 556 bytes --]
On Wed, 2007-03-10 at 09:18 -0400, jamal wrote:
> On Tue, 2007-02-10 at 16:33 -0700, Michael Chan wrote:
>
> > Seems ok to me. I think we should make it more clear that we're
> > skipping over the VLAN tag:
> >
> > (struct tg3_tx_cbdata *)&((__skb)->cb[sizeof(struct vlan_skb_tx_cookie)])
> >
>
> Will do - thanks Michael.
Ok, attached patch against net-2.6.24 from this morning. I am setting up
some equipment for testing as i type this - so i will test for any
regressions. If you dont hear from me on the subject then all went ok.
cheers,
jamal
[-- Attachment #2: oct7-tg3-p1 --]
[-- Type: text/plain, Size: 13573 bytes --]
[TG3] Some cleanups
Make the xmit path code better functionally organized and more readable.
Matt Carlson contributed the moving of the VLAN formatting into
XXXX_prep_frame() portion and Michael Chan eyeballed the patch and
made it better.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
---
commit 190674ff1fe0b7bddf038c2bfddf45b9c6418e2a
tree d6f03d10d94a39ad22fd590b30c6d50c81f3eb5c
parent 0a14acec89454d350c1bd141b3309df421433f3c
author Jamal Hadi Salim <hadi@cyberus.ca> Sun, 07 Oct 2007 08:10:32 -0400
committer Jamal Hadi Salim <hadi@cyberus.ca> Sun, 07 Oct 2007 08:10:32 -0400
drivers/net/tg3.c | 281 ++++++++++++++++++++++++++++++++---------------------
1 files changed, 172 insertions(+), 109 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index d4ac6e9..ce6f02f 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -3910,47 +3910,72 @@ static void tg3_set_txd(struct tg3 *tp, int entry,
txd->vlan_tag = vlan_tag << TXD_VLAN_TAG_SHIFT;
}
-/* hard_start_xmit for devices that don't have any bugs and
- * support TG3_FLG2_HW_TSO_2 only.
- */
-static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
+struct tg3_tx_cbdata {
+ u32 base_flags;
+ unsigned int mss;
+};
+/* using cb[8] skips over the VLAN tag:
+ * (struct tg3_tx_cbdata *)&((__skb)->cb[sizeof(struct vlan_skb_tx_cookie)])
+*/
+#define TG3_SKB_CB(__skb) ((struct tg3_tx_cbdata *)&((__skb)->cb[8]))
+#define NETDEV_TX_DROPPED -5
+
+static int tg3_prep_bug_frame(struct sk_buff *skb, struct net_device *dev)
{
+ struct tg3_tx_cbdata *cb = TG3_SKB_CB(skb);
+#if TG3_VLAN_TAG_USED
struct tg3 *tp = netdev_priv(dev);
- dma_addr_t mapping;
- u32 len, entry, base_flags, mss;
+ u32 vlantag = 0;
- len = skb_headlen(skb);
+ if (tp->vlgrp != NULL && vlan_tx_tag_present(skb))
+ vlantag = (TXD_FLAG_VLAN | (vlan_tx_tag_get(skb) << 16));
- /* We are running in BH disabled context with netif_tx_lock
- * and TX reclaim runs via tp->napi.poll inside of a software
- * interrupt. Furthermore, IRQ processing runs lockless so we have
- * no IRQ context deadlocks to worry about either. Rejoice!
- */
- if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
- if (!netif_queue_stopped(dev)) {
- netif_stop_queue(dev);
+ cb->base_flags = vlantag;
+#endif
- /* This is a hard error, log it. */
- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
- "queue awake!\n", dev->name);
+ cb->mss = skb_shinfo(skb)->gso_size;
+ if (cb->mss != 0) {
+ if (skb_header_cloned(skb) &&
+ pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
+ dev_kfree_skb(skb);
+ return NETDEV_TX_DROPPED;
}
- return NETDEV_TX_BUSY;
+
+ cb->base_flags |= (TXD_FLAG_CPU_PRE_DMA |
+ TXD_FLAG_CPU_POST_DMA);
}
- entry = tp->tx_prod;
- base_flags = 0;
- mss = 0;
- if ((mss = skb_shinfo(skb)->gso_size) != 0) {
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ cb->base_flags |= TXD_FLAG_TCPUDP_CSUM;
+
+ return NETDEV_TX_OK;
+}
+
+static int tg3_prep_frame(struct sk_buff *skb, struct net_device *dev)
+{
+ struct tg3_tx_cbdata *cb = TG3_SKB_CB(skb);
+#if TG3_VLAN_TAG_USED
+ struct tg3 *tp = netdev_priv(dev);
+ u32 vlantag = 0;
+
+ if (tp->vlgrp != NULL && vlan_tx_tag_present(skb))
+ vlantag = (TXD_FLAG_VLAN | (vlan_tx_tag_get(skb) << 16));
+
+ cb->base_flags = vlantag;
+#endif
+
+ cb->mss = skb_shinfo(skb)->gso_size;
+ if (cb->mss != 0) {
int tcp_opt_len, ip_tcp_len;
if (skb_header_cloned(skb) &&
pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
dev_kfree_skb(skb);
- goto out_unlock;
+ return NETDEV_TX_DROPPED;
}
if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
- mss |= (skb_headlen(skb) - ETH_HLEN) << 9;
+ cb->mss |= (skb_headlen(skb) - ETH_HLEN) << 9;
else {
struct iphdr *iph = ip_hdr(skb);
@@ -3958,32 +3983,58 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
ip_tcp_len = ip_hdrlen(skb) + sizeof(struct tcphdr);
iph->check = 0;
- iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len);
- mss |= (ip_tcp_len + tcp_opt_len) << 9;
+ iph->tot_len = htons(cb->mss + ip_tcp_len
+ + tcp_opt_len);
+ cb->mss |= (ip_tcp_len + tcp_opt_len) << 9;
}
- base_flags |= (TXD_FLAG_CPU_PRE_DMA |
+ cb->base_flags |= (TXD_FLAG_CPU_PRE_DMA |
TXD_FLAG_CPU_POST_DMA);
tcp_hdr(skb)->check = 0;
}
else if (skb->ip_summed == CHECKSUM_PARTIAL)
- base_flags |= TXD_FLAG_TCPUDP_CSUM;
-#if TG3_VLAN_TAG_USED
- if (tp->vlgrp != NULL && vlan_tx_tag_present(skb))
- base_flags |= (TXD_FLAG_VLAN |
- (vlan_tx_tag_get(skb) << 16));
-#endif
+ cb->base_flags |= TXD_FLAG_TCPUDP_CSUM;
+
+ return NETDEV_TX_OK;
+}
+
+void tg3_complete_xmit(struct net_device *dev)
+{
+ struct tg3 *tp = netdev_priv(dev);
+ u32 entry = tp->tx_prod;
+
+ /* Packets are ready, update Tx producer idx local and on card. */
+ tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
+
+ if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) {
+ netif_stop_queue(dev);
+ if (tg3_tx_avail(tp) >= TG3_TX_WAKEUP_THRESH(tp))
+ netif_wake_queue(dev);
+ }
+
+ mmiowb();
+ dev->trans_start = jiffies;
+}
+static int tg3_enqueue(struct sk_buff *skb, struct net_device *dev)
+{
+ struct tg3 *tp = netdev_priv(dev);
+ dma_addr_t mapping;
+ u32 len, entry;
+ struct tg3_tx_cbdata *cb = TG3_SKB_CB(skb);
+
+ entry = tp->tx_prod;
+ len = skb_headlen(skb);
/* Queue skb data, a.k.a. the main skb fragment. */
mapping = pci_map_single(tp->pdev, skb->data, len, PCI_DMA_TODEVICE);
tp->tx_buffers[entry].skb = skb;
pci_unmap_addr_set(&tp->tx_buffers[entry], mapping, mapping);
- tg3_set_txd(tp, entry, mapping, len, base_flags,
- (skb_shinfo(skb)->nr_frags == 0) | (mss << 1));
+ tg3_set_txd(tp, entry, mapping, len, cb->base_flags,
+ (skb_shinfo(skb)->nr_frags == 0) | (cb->mss << 1));
entry = NEXT_TX(entry);
@@ -4005,28 +4056,51 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
pci_unmap_addr_set(&tp->tx_buffers[entry], mapping, mapping);
tg3_set_txd(tp, entry, mapping, len,
- base_flags, (i == last) | (mss << 1));
+ cb->base_flags,
+ (i == last) | (cb->mss << 1));
entry = NEXT_TX(entry);
}
}
- /* Packets are ready, update Tx producer idx local and on card. */
- tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
-
tp->tx_prod = entry;
- if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) {
- netif_stop_queue(dev);
- if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH(tp))
- netif_wake_queue(tp->dev);
- }
+ return NETDEV_TX_OK;
+}
+
+/* hard_start_xmit for devices that don't have any bugs and
+ * support TG3_FLG2_HW_TSO_2 only.
+ */
+static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct tg3 *tp = netdev_priv(dev);
+ int ret = tg3_prep_frame(skb, dev);
+ /* XXX: original code did mmiowb(); on failure,
+ * I dont think thats necessary
+ */
+ if (unlikely(ret != NETDEV_TX_OK))
+ return NETDEV_TX_OK;
-out_unlock:
- mmiowb();
+ /* We are running in BH disabled context with netif_tx_lock
+ * and TX reclaim runs via tp->poll inside of a software
+ * interrupt. Furthermore, IRQ processing runs lockless so we have
+ * no IRQ context deadlocks to worry about either. Rejoice!
+ */
+ if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
+ if (!netif_queue_stopped(dev)) {
+ netif_stop_queue(dev);
- dev->trans_start = jiffies;
+ /* This is a hard error, log it. */
+ printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
+ "queue awake!\n", dev->name);
+ }
+ return NETDEV_TX_BUSY;
+ }
- return NETDEV_TX_OK;
+ ret = tg3_enqueue(skb, dev);
+ if (ret == NETDEV_TX_OK)
+ tg3_complete_xmit(dev);
+
+ return ret;
}
static int tg3_start_xmit_dma_bug(struct sk_buff *, struct net_device *);
@@ -4067,46 +4141,19 @@ tg3_tso_bug_end:
/* hard_start_xmit for devices that have the 4G bug and/or 40-bit bug and
* support TG3_FLG2_HW_TSO_1 or firmware TSO only.
*/
-static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
+static int tg3_enqueue_buggy(struct sk_buff *skb, struct net_device *dev)
{
struct tg3 *tp = netdev_priv(dev);
dma_addr_t mapping;
- u32 len, entry, base_flags, mss;
+ u32 len, entry;
int would_hit_hwbug;
+ struct tg3_tx_cbdata *cb = TG3_SKB_CB(skb);
- len = skb_headlen(skb);
- /* We are running in BH disabled context with netif_tx_lock
- * and TX reclaim runs via tp->napi.poll inside of a software
- * interrupt. Furthermore, IRQ processing runs lockless so we have
- * no IRQ context deadlocks to worry about either. Rejoice!
- */
- if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
- if (!netif_queue_stopped(dev)) {
- netif_stop_queue(dev);
-
- /* This is a hard error, log it. */
- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
- "queue awake!\n", dev->name);
- }
- return NETDEV_TX_BUSY;
- }
-
- entry = tp->tx_prod;
- base_flags = 0;
- if (skb->ip_summed == CHECKSUM_PARTIAL)
- base_flags |= TXD_FLAG_TCPUDP_CSUM;
- mss = 0;
- if ((mss = skb_shinfo(skb)->gso_size) != 0) {
+ if (cb->mss != 0) {
struct iphdr *iph;
int tcp_opt_len, ip_tcp_len, hdr_len;
- if (skb_header_cloned(skb) &&
- pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
- dev_kfree_skb(skb);
- goto out_unlock;
- }
-
tcp_opt_len = tcp_optlen(skb);
ip_tcp_len = ip_hdrlen(skb) + sizeof(struct tcphdr);
@@ -4115,15 +4162,13 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
(tp->tg3_flags2 & TG3_FLG2_TSO_BUG))
return (tg3_tso_bug(tp, skb));
- base_flags |= (TXD_FLAG_CPU_PRE_DMA |
- TXD_FLAG_CPU_POST_DMA);
iph = ip_hdr(skb);
iph->check = 0;
- iph->tot_len = htons(mss + hdr_len);
+ iph->tot_len = htons(cb->mss + hdr_len);
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
tcp_hdr(skb)->check = 0;
- base_flags &= ~TXD_FLAG_TCPUDP_CSUM;
+ cb->base_flags &= ~TXD_FLAG_TCPUDP_CSUM;
} else
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
iph->daddr, 0,
@@ -4136,22 +4181,19 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
int tsflags;
tsflags = (iph->ihl - 5) + (tcp_opt_len >> 2);
- mss |= (tsflags << 11);
+ cb->mss |= (tsflags << 11);
}
} else {
if (tcp_opt_len || iph->ihl > 5) {
int tsflags;
tsflags = (iph->ihl - 5) + (tcp_opt_len >> 2);
- base_flags |= tsflags << 12;
+ cb->base_flags |= tsflags << 12;
}
}
}
-#if TG3_VLAN_TAG_USED
- if (tp->vlgrp != NULL && vlan_tx_tag_present(skb))
- base_flags |= (TXD_FLAG_VLAN |
- (vlan_tx_tag_get(skb) << 16));
-#endif
+ len = skb_headlen(skb);
+ entry = tp->tx_prod;
/* Queue skb data, a.k.a. the main skb fragment. */
mapping = pci_map_single(tp->pdev, skb->data, len, PCI_DMA_TODEVICE);
@@ -4164,8 +4206,8 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
if (tg3_4g_overflow_test(mapping, len))
would_hit_hwbug = 1;
- tg3_set_txd(tp, entry, mapping, len, base_flags,
- (skb_shinfo(skb)->nr_frags == 0) | (mss << 1));
+ tg3_set_txd(tp, entry, mapping, len, cb->base_flags,
+ (skb_shinfo(skb)->nr_frags == 0) | (cb->mss << 1));
entry = NEXT_TX(entry);
@@ -4194,10 +4236,11 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
tg3_set_txd(tp, entry, mapping, len,
- base_flags, (i == last)|(mss << 1));
+ cb->base_flags,
+ (i == last)|(cb->mss << 1));
else
tg3_set_txd(tp, entry, mapping, len,
- base_flags, (i == last));
+ cb->base_flags, (i == last));
entry = NEXT_TX(entry);
}
@@ -4214,28 +4257,48 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
* failure, silently drop this packet.
*/
if (tigon3_dma_hwbug_workaround(tp, skb, last_plus_one,
- &start, base_flags, mss))
- goto out_unlock;
+ &start, cb->base_flags,
+ cb->mss)) {
+ mmiowb();
+ return NETDEV_TX_OK;
+ }
entry = start;
}
- /* Packets are ready, update Tx producer idx local and on card. */
- tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
-
tp->tx_prod = entry;
- if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) {
- netif_stop_queue(dev);
- if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH(tp))
- netif_wake_queue(tp->dev);
- }
+ return NETDEV_TX_OK;
+}
+
+static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
+{
+ struct tg3 *tp = netdev_priv(dev);
+ int ret = tg3_prep_bug_frame(skb, dev);
-out_unlock:
- mmiowb();
+ if (unlikely(ret != NETDEV_TX_OK))
+ return NETDEV_TX_OK;
- dev->trans_start = jiffies;
+ /* We are running in BH disabled context with netif_tx_lock
+ * and TX reclaim runs via tp->poll inside of a software
+ * interrupt. Furthermore, IRQ processing runs lockless so we have
+ * no IRQ context deadlocks to worry about either. Rejoice!
+ */
+ if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
+ if (!netif_queue_stopped(dev)) {
+ netif_stop_queue(dev);
- return NETDEV_TX_OK;
+ /* This is a hard error, log it. */
+ printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
+ "queue awake!\n", dev->name);
+ }
+ return NETDEV_TX_BUSY;
+ }
+
+ ret = tg3_enqueue_buggy(skb, dev);
+ if (ret == NETDEV_TX_OK)
+ tg3_complete_xmit(dev);
+
+ return ret;
}
static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
next prev parent reply other threads:[~2007-10-07 15:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-30 18:11 [PATCH][TG3]Some cleanups jamal
2007-09-30 18:12 ` jamal
2007-10-02 0:21 ` Michael Chan
2007-10-02 12:37 ` jamal
2007-10-02 23:33 ` Michael Chan
2007-10-03 13:18 ` jamal
2007-10-07 15:12 ` jamal [this message]
2007-10-08 6:32 ` David Miller
2007-10-08 13:42 ` jamal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1191769941.4394.1.camel@localhost \
--to=hadi@cyberus.ca \
--cc=mcarlson@broadcom.com \
--cc=mchan@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.