* Adding SATA disk with broken NCQ
@ 2007-11-06 1:50 Simos Xenitellis
2007-11-06 22:49 ` Hitachi SATA HSM violation (Was: Re: Adding SATA disk with broken NCQ) Simos Xenitellis
0 siblings, 1 reply; 2+ messages in thread
From: Simos Xenitellis @ 2007-11-06 1:50 UTC (permalink / raw)
To: linux-ide
Hi,
I'ld like to add another disk in the blacklist regarding NCQ
(libata-core.c).
It is the disk model "HITACHI HTS541616J9SA00" with rev "SB4IC7UP".
Currently there is a similar description,
{ "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, },
Notice the difference between SB4IC7UP and SB4OC70P.
I have verified that the model name and rev are "HITACHI
HTS541616J9SA00" and "SB4IC7UP" by adding printks in the kernel. The
word HITACHI is all caps.
Blacklisting does eliminate NCQ-related disk errors.
Simos
^ permalink raw reply [flat|nested] 2+ messages in thread
* Hitachi SATA HSM violation (Was: Re: Adding SATA disk with broken NCQ)
2007-11-06 1:50 Adding SATA disk with broken NCQ Simos Xenitellis
@ 2007-11-06 22:49 ` Simos Xenitellis
0 siblings, 0 replies; 2+ messages in thread
From: Simos Xenitellis @ 2007-11-06 22:49 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: Type: text/plain, Size: 1477 bytes --]
Reading other similar reports on this issue, I attach a dmesg that shows
the HSM violations/NCQ being disabled.
In addition,
# hdparm -i /dev/sda
/dev/sda:
Model=HITACHI HTS541616J9SA00 , FwRev=SB4IC7UP,
SerialNo=...
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=7516kB, MaxMultSect=16, MultSect=?16?
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-7 T13 1532D revision 1:
ATA/ATAPI-2,3,4,5,6,7
* signifies the current active mode
Simos
On Tue, 2007-11-06 at 01:50 +0000, Simos Xenitellis wrote:
> Hi,
> I'ld like to add another disk in the blacklist regarding NCQ
> (libata-core.c).
>
> It is the disk model "HITACHI HTS541616J9SA00" with rev "SB4IC7UP".
>
> Currently there is a similar description,
> { "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, },
> Notice the difference between SB4IC7UP and SB4OC70P.
>
> I have verified that the model name and rev are "HITACHI
> HTS541616J9SA00" and "SB4IC7UP" by adding printks in the kernel. The
> word HITACHI is all caps.
> Blacklisting does eliminate NCQ-related disk errors.
>
> Simos
>
[-- Attachment #2: hsm-violation.txt --]
[-- Type: text/plain, Size: 11543 bytes --]
[ 51.294197] ata1.00: exception Emask 0x2 SAct 0x785 SErr 0x0 action 0x2 frozen
[ 51.294208] ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x785 FIS=005040a1:00000010)
[ 51.294219] ata1.00: cmd 60/08:00:49:64:9f/00:00:06:00:00/40 tag 0 cdb 0x0 data 4096 in
[ 51.294222] res 50/00:08:f9:5b:5a/00:00:06:00:00/40 Emask 0x2 (HSM violation)
[ 51.294232] ata1.00: cmd 60/08:10:f9:5b:5a/00:00:06:00:00/40 tag 2 cdb 0x0 data 4096 in
[ 51.294235] res 50/00:08:f9:5b:5a/00:00:06:00:00/40 Emask 0x2 (HSM violation)
[ 51.294244] ata1.00: cmd 60/08:38:51:64:9f/00:00:06:00:00/40 tag 7 cdb 0x0 data 4096 in
[ 51.294247] res 50/00:08:f9:5b:5a/00:00:06:00:00/40 Emask 0x2 (HSM violation)
[ 51.294256] ata1.00: cmd 60/08:40:59:64:9f/00:00:06:00:00/40 tag 8 cdb 0x0 data 4096 in
[ 51.294259] res 50/00:08:f9:5b:5a/00:00:06:00:00/40 Emask 0x2 (HSM violation)
[ 51.294268] ata1.00: cmd 60/08:48:a9:2a:56/00:00:06:00:00/40 tag 9 cdb 0x0 data 4096 in
[ 51.294271] res 50/00:08:f9:5b:5a/00:00:06:00:00/40 Emask 0x2 (HSM violation)
[ 51.294281] ata1.00: cmd 60/08:50:61:64:9f/00:00:06:00:00/40 tag 10 cdb 0x0 data 4096 in
[ 51.294283] res 50/00:08:f9:5b:5a/00:00:06:00:00/40 Emask 0x2 (HSM violation)
[ 51.325202] ata1: soft resetting port
[ 51.330258] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 51.331248] ata1.00: configured for UDMA/100
[ 51.331279] ata1: EH complete
[ 51.331463] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 51.331494] sd 0:0:0:0: [sda] Write Protect is off
[ 51.331498] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 51.331575] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[23679.735640] ata1.00: exception Emask 0x2 SAct 0x3fc SErr 0x0 action 0x2 frozen
[23679.735651] ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x3fc FIS=005040a1:00000002)
[23679.735662] ata1.00: cmd 61/30:10:cc:be:5e/00:00:0a:00:00/40 tag 2 cdb 0x0 data 24576 out
[23679.735665] res 50/00:08:bc:bf:61/00:00:0a:00:00/40 Emask 0x2 (HSM violation)
[23679.735676] ata1.00: cmd 61/08:18:64:c3:5e/00:00:0a:00:00/40 tag 3 cdb 0x0 data 4096 out
[23679.735679] res 50/00:08:bc:bf:61/00:00:0a:00:00/40 Emask 0x2 (HSM violation)
[23679.735689] ata1.00: cmd 61/10:20:fc:55:5f/00:00:0a:00:00/40 tag 4 cdb 0x0 data 8192 out
[23679.735692] res 50/00:08:bc:bf:61/00:00:0a:00:00/40 Emask 0x2 (HSM violation)
[23679.735701] ata1.00: cmd 61/08:28:fc:56:5f/00:00:0a:00:00/40 tag 5 cdb 0x0 data 4096 out
[23679.735704] res 50/00:08:bc:bf:61/00:00:0a:00:00/40 Emask 0x2 (HSM violation)
[23679.735714] ata1.00: cmd 61/48:30:0c:57:5f/00:00:0a:00:00/40 tag 6 cdb 0x0 data 36864 out
[23679.735717] res 50/00:08:bc:bf:61/00:00:0a:00:00/40 Emask 0x2 (HSM violation)
[23679.735727] ata1.00: cmd 61/08:38:74:57:5f/00:00:0a:00:00/40 tag 7 cdb 0x0 data 4096 out
[23679.735730] res 50/00:08:bc:bf:61/00:00:0a:00:00/40 Emask 0x2 (HSM violation)
[23679.735740] ata1.00: cmd 61/10:40:7c:57:5f/00:00:0a:00:00/40 tag 8 cdb 0x0 data 8192 out
[23679.735743] res 50/00:08:bc:bf:61/00:00:0a:00:00/40 Emask 0x2 (HSM violation)
[23679.735752] ata1.00: cmd 61/08:48:bc:bf:61/00:00:0a:00:00/40 tag 9 cdb 0x0 data 4096 out
[23679.735755] res 50/00:08:bc:bf:61/00:00:0a:00:00/40 Emask 0x2 (HSM violation)
[23679.833152] ata1: soft resetting port
[23679.883781] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[23679.884583] ata1.00: configured for UDMA/100
[23679.884619] ata1: EH complete
[23679.884704] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[23679.884722] sd 0:0:0:0: [sda] Write Protect is off
[23679.884727] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[23679.884752] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[23978.150065] ata1.00: exception Emask 0x2 SAct 0x1fff9 SErr 0x0 action 0x2 frozen
[23978.150076] ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x1fff9 FIS=005040a1:00000004)
[23978.150087] ata1.00: cmd 61/08:00:9c:5d:65/00:00:0b:00:00/40 tag 0 cdb 0x0 data 4096 out
[23978.150090] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.150101] ata1.00: cmd 61/08:18:34:7e:82/00:00:0a:00:00/40 tag 3 cdb 0x0 data 4096 out
[23978.150104] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.150114] ata1.00: cmd 61/08:20:f4:53:85/00:00:0a:00:00/40 tag 4 cdb 0x0 data 4096 out
[23978.150117] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.150126] ata1.00: cmd 61/08:28:9c:5d:85/00:00:0a:00:00/40 tag 5 cdb 0x0 data 4096 out
[23978.150130] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.150139] ata1.00: cmd 61/08:30:9c:5d:99/00:00:0a:00:00/40 tag 6 cdb 0x0 data 4096 out
[23978.150142] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.150152] ata1.00: cmd 61/08:38:9c:5d:a5/00:00:0a:00:00/40 tag 7 cdb 0x0 data 4096 out
[23978.150155] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.150165] ata1.00: cmd 61/08:40:9c:5d:a9/00:00:0a:00:00/40 tag 8 cdb 0x0 data 4096 out
[23978.150168] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.150178] ata1.00: cmd 61/08:48:9c:5d:ad/00:00:0a:00:00/40 tag 9 cdb 0x0 data 4096 out
[23978.150181] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.150191] ata1.00: cmd 61/08:50:9c:5d:ed/00:00:0a:00:00/40 tag 10 cdb 0x0 data 4096 out
[23978.150194] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.150204] ata1.00: cmd 61/08:58:bc:5d:ed/00:00:0a:00:00/40 tag 11 cdb 0x0 data 4096 out
[23978.150207] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.150217] ata1.00: cmd 61/08:60:14:61:ed/00:00:0a:00:00/40 tag 12 cdb 0x0 data 4096 out
[23978.150220] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.150230] ata1.00: cmd 61/08:68:14:14:ef/00:00:0a:00:00/40 tag 13 cdb 0x0 data 4096 out
[23978.150233] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.150243] ata1.00: cmd 61/08:70:bc:15:ef/00:00:0a:00:00/40 tag 14 cdb 0x0 data 4096 out
[23978.150246] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.150256] ata1.00: cmd 61/08:78:84:25:ef/00:00:0a:00:00/40 tag 15 cdb 0x0 data 4096 out
[23978.150259] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.150269] ata1.00: cmd 61/08:80:9c:5d:89/00:00:0b:00:00/40 tag 16 cdb 0x0 data 4096 out
[23978.150272] res 50/00:08:9c:5d:89/00:00:0b:00:00/40 Emask 0x2 (HSM violation)
[23978.211938] ata1: soft resetting port
[23978.220125] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[23978.221123] ata1.00: configured for UDMA/100
[23978.221172] ata1: EH complete
[23978.221645] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[23978.221692] sd 0:0:0:0: [sda] Write Protect is off
[23978.221697] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[23978.221747] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[23996.045029] ata1.00: exception Emask 0x2 SAct 0x4 SErr 0x0 action 0x2 frozen
[23996.045038] ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x4 FIS=005040a1:00000002)
[23996.045050] ata1.00: cmd 60/08:10:09:8e:08/00:00:08:00:00/40 tag 2 cdb 0x0 data 4096 in
[23996.045053] res 50/00:08:09:8e:08/00:00:08:00:00/40 Emask 0x2 (HSM violation)
[23996.078435] ata1: soft resetting port
[23996.109689] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[23996.111110] ata1.00: configured for UDMA/100
[23996.111131] ata1: EH complete
[23996.111252] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[23996.111288] sd 0:0:0:0: [sda] Write Protect is off
[23996.111293] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[23996.111369] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[23997.163991] ata1.00: exception Emask 0x2 SAct 0xaf SErr 0x0 action 0x2 frozen
[23997.164003] ata1.00: (spurious completions during NCQ issue=0x0 SAct=0xaf FIS=005040a1:00000100)
[23997.164014] ata1.00: cmd 60/08:00:f1:29:12/00:00:08:00:00/40 tag 0 cdb 0x0 data 4096 in
[23997.164017] res 50/00:60:c1:62:66/00:00:06:00:00/40 Emask 0x2 (HSM violation)
[23997.164027] ata1.00: cmd 60/28:08:c1:e6:06/00:00:08:00:00/40 tag 1 cdb 0x0 data 20480 in
[23997.164030] res 50/00:60:c1:62:66/00:00:06:00:00/40 Emask 0x2 (HSM violation)
[23997.164040] ata1.00: cmd 60/60:10:c1:62:66/00:00:06:00:00/40 tag 2 cdb 0x0 data 49152 in
[23997.164043] res 50/00:60:c1:62:66/00:00:06:00:00/40 Emask 0x2 (HSM violation)
[23997.164053] ata1.00: cmd 60/08:18:f1:38:06/00:00:08:00:00/40 tag 3 cdb 0x0 data 4096 in
[23997.164056] res 50/00:60:c1:62:66/00:00:06:00:00/40 Emask 0x2 (HSM violation)
[23997.164066] ata1.00: cmd 60/08:28:19:2a:12/00:00:08:00:00/40 tag 5 cdb 0x0 data 4096 in
[23997.164069] res 50/00:60:c1:62:66/00:00:06:00:00/40 Emask 0x2 (HSM violation)
[23997.164079] ata1.00: cmd 60/18:38:e9:5b:5a/00:00:06:00:00/40 tag 7 cdb 0x0 data 12288 in
[23997.164082] res 50/00:60:c1:62:66/00:00:06:00:00/40 Emask 0x2 (HSM violation)
[23997.193299] ata1: soft resetting port
[23997.201220] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[23997.202832] ata1.00: configured for UDMA/100
[23997.202863] ata1: EH complete
[23997.203030] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[23997.203051] sd 0:0:0:0: [sda] Write Protect is off
[23997.203056] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[23997.203082] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[23998.308088] ata1.00: NCQ disabled due to excessive errors
[23998.308099] ata1.00: exception Emask 0x2 SAct 0x80ac SErr 0x0 action 0x2 frozen
[23998.308106] ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x80ac FIS=005040a1:00000040)
[23998.308117] ata1.00: cmd 60/08:10:ec:dd:5a/00:00:0a:00:00/40 tag 2 cdb 0x0 data 4096 in
[23998.308121] res 50/00:40:e9:72:0d/00:00:08:00:00/40 Emask 0x2 (HSM violation)
[23998.308131] ata1.00: cmd 60/20:18:09:11:07/00:00:08:00:00/40 tag 3 cdb 0x0 data 16384 in
[23998.308134] res 50/00:40:e9:72:0d/00:00:08:00:00/40 Emask 0x2 (HSM violation)
[23998.308144] ata1.00: cmd 60/08:28:71:17:07/00:00:08:00:00/40 tag 5 cdb 0x0 data 4096 in
[23998.308147] res 50/00:40:e9:72:0d/00:00:08:00:00/40 Emask 0x2 (HSM violation)
[23998.308157] ata1.00: cmd 60/40:38:e9:72:0d/00:00:08:00:00/40 tag 7 cdb 0x0 data 32768 in
[23998.308160] res 50/00:40:e9:72:0d/00:00:08:00:00/40 Emask 0x2 (HSM violation)
[23998.308170] ata1.00: cmd 60/08:78:01:11:07/00:00:08:00:00/40 tag 15 cdb 0x0 data 4096 in
[23998.308173] res 50/00:40:e9:72:0d/00:00:08:00:00/40 Emask 0x2 (HSM violation)
[23998.333828] ata1: soft resetting port
[23998.343242] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[23998.344371] ata1.00: configured for UDMA/100
[23998.344400] ata1: EH complete
[23998.368986] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[23998.387550] sd 0:0:0:0: [sda] Write Protect is off
[23998.387558] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[23998.396175] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-11-06 22:49 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-11-06 1:50 Adding SATA disk with broken NCQ Simos Xenitellis
2007-11-06 22:49 ` Hitachi SATA HSM violation (Was: Re: Adding SATA disk with broken NCQ) Simos Xenitellis
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.