From: Harvey Harrison <harvey.harrison@gmail.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>,
LKML <linux-kernel@vger.kernel.org>
Subject: [RFC PATCH] Unify mmap_[32|64].c
Date: Tue, 04 Dec 2007 12:52:33 -0800 [thread overview]
Message-ID: <1196801553.10408.24.camel@brick> (raw)
x86: Unify mmap_32.c mmap_64.c
Start from mmap_32.c and add X86_64 specific function as well.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
---
Just a preliminary patch to see if this is an acceptable approach, tested
only on X86_32 at the moment. Suggestions welcome. Further iterations can
start to make it a bit cleaner.
arch/x86/mm/Makefile_32 | 2 +-
arch/x86/mm/Makefile_64 | 3 +-
arch/x86/mm/{mmap_32.c => mmap.c} | 57 ++++++++++++++++++++-----------------
arch/x86/mm/mmap_64.c | 32 --------------------
4 files changed, 33 insertions(+), 61 deletions(-)
diff --git a/arch/x86/mm/Makefile_32 b/arch/x86/mm/Makefile_32
index 362b4ad..a01aca7 100644
--- a/arch/x86/mm/Makefile_32
+++ b/arch/x86/mm/Makefile_32
@@ -2,7 +2,7 @@
# Makefile for the linux i386-specific parts of the memory manager.
#
-obj-y := init_32.o pgtable_32.o fault_32.o ioremap_32.o extable_32.o pageattr_32.o mmap_32.o
+obj-y := init_32.o pgtable_32.o fault_32.o ioremap_32.o extable_32.o pageattr_32.o mmap.o
obj-$(CONFIG_NUMA) += discontig_32.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
diff --git a/arch/x86/mm/Makefile_64 b/arch/x86/mm/Makefile_64
index d18baed..b5a7448 100644
--- a/arch/x86/mm/Makefile_64
+++ b/arch/x86/mm/Makefile_64
@@ -2,9 +2,8 @@
# Makefile for the linux x86_64-specific parts of the memory manager.
#
-obj-y := init_64.o fault_64.o ioremap_64.o extable_64.o pageattr_64.o mmap_64.o
+obj-y := init_64.o fault_64.o ioremap_64.o extable_64.o pageattr_64.o mmap.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_NUMA) += numa_64.o
obj-$(CONFIG_K8_NUMA) += k8topology_64.o
obj-$(CONFIG_ACPI_NUMA) += srat_64.o
-obj-$(CONFIG_IA32_EMULATION) += mmap_32.o
diff --git a/arch/x86/mm/mmap_32.c b/arch/x86/mm/mmap.c
similarity index 62%
rename from arch/x86/mm/mmap_32.c
rename to arch/x86/mm/mmap.c
index d490662..0462f11 100644
--- a/arch/x86/mm/mmap_32.c
+++ b/arch/x86/mm/mmap.c
@@ -1,30 +1,12 @@
/*
- * linux/arch/i386/mm/mmap.c
- *
- * flexible mmap layout support
+ * Combined x86 flexible mmap layout support
*
+ * Started by Ingo Molnar <mingo@elte.hu>
* Copyright 2003-2004 Red Hat Inc., Durham, North Carolina.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * Copyright 2005 Andi Kleen, SuSE Labs.
*
- *
- * Started by Ingo Molnar <mingo@elte.hu>
*/
-#include <linux/personality.h>
#include <linux/mm.h>
#include <linux/random.h>
#include <linux/sched.h>
@@ -57,11 +39,7 @@ static inline unsigned long mmap_base(struct mm_struct *mm)
* This function, called very early during the creation of a new
* process VM image, sets up which VM layout function to use:
*/
-#ifdef CONFIG_X86_32
-void arch_pick_mmap_layout(struct mm_struct *mm)
-#else
-void ia32_pick_mmap_layout(struct mm_struct *mm)
-#endif
+static void ia32_pick_mmap_layout(struct mm_struct *mm)
{
/*
* Fall back to the standard layout if the personality
@@ -79,3 +57,30 @@ void ia32_pick_mmap_layout(struct mm_struct *mm)
mm->unmap_area = arch_unmap_area_topdown;
}
}
+
+/* TODO: move the mmap code from sys_x86_64.c over here. */
+void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+#ifdef CONFIG_X86_32
+ return ia32_pick_mmap_layout(mm);
+#endif
+#ifdef CONFIG_IA32_EMULATION
+ if (current_thread_info()->flags & _TIF_IA32)
+ return ia32_pick_mmap_layout(mm);
+#endif
+ mm->mmap_base = TASK_UNMAPPED_BASE;
+ if (current->flags & PF_RANDOMIZE) {
+ /*
+ * Add 28bit randomness which is about 40bits of
+ * address space because mmap base has to be page
+ * aligned. or ~1/128 of the total user VM (total
+ * user address space is 47bits)
+ */
+ unsigned rnd = get_random_int() & 0xfffffff;
+
+ mm->mmap_base += ((unsigned long)rnd) << PAGE_SHIFT;
+ }
+ mm->get_unmapped_area = arch_get_unmapped_area;
+ mm->unmap_area = arch_unmap_area;
+}
+
diff --git a/arch/x86/mm/mmap_64.c b/arch/x86/mm/mmap_64.c
deleted file mode 100644
index ffb71a3..0000000
--- a/arch/x86/mm/mmap_64.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/* Copyright 2005 Andi Kleen, SuSE Labs.
- * Licensed under GPL, v.2
- */
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/random.h>
-#include <asm/ia32.h>
-
-/* Notebook: move the mmap code from sys_x86_64.c over here. */
-
-void arch_pick_mmap_layout(struct mm_struct *mm)
-{
-#ifdef CONFIG_IA32_EMULATION
- if (current_thread_info()->flags & _TIF_IA32)
- return ia32_pick_mmap_layout(mm);
-#endif
- mm->mmap_base = TASK_UNMAPPED_BASE;
- if (current->flags & PF_RANDOMIZE) {
- /*
- * Add 28bit randomness which is about 40bits of
- * address space because mmap base has to be page
- * aligned. or ~1/128 of the total user VM (total
- * user address space is 47bits)
- */
- unsigned rnd = get_random_int() & 0xfffffff;
-
- mm->mmap_base += ((unsigned long)rnd) << PAGE_SHIFT;
- }
- mm->get_unmapped_area = arch_get_unmapped_area;
- mm->unmap_area = arch_unmap_area;
-}
-
next reply other threads:[~2007-12-04 20:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-04 20:52 Harvey Harrison [this message]
2007-12-04 21:36 ` [RFC PATCH] Unify mmap_[32|64].c Ingo Molnar
2007-12-04 21:55 ` [RFC PATCHv2] " Harvey Harrison
2007-12-04 22:11 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1196801553.10408.24.camel@brick \
--to=harvey.harrison@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.