Re: problems with Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)

[forwind <forward@forwind.net>]

Takashi wrote:
> Good to hear.  Could you show the output of "lspci -nv" for the audio
> device?  We can add the entry for your device so that the driver works
> without an extra model option.

I think this is what you are after:

00:1b.0 0403: 8086:284b (rev 03)
        Subsystem: 1071:8253
        Flags: bus master, fast devsel, latency 0, IRQ 22
        Memory at fc300000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
        Capabilities: [70] Express Unknown type IRQ 0

hope this helps.

Conor

On Mon, 2008-01-21 at 18:01 +0100, Takashi Iwai wrote:
> At Mon, 21 Jan 2008 16:49:00 +0000,
> Forwinder wrote:
> > 
> > Takashi wrote:
> > 
> > >It's a VERY old version.  Try to install the latest ALSA HG version or
> > >the daily snapshot tarball.  If it still doesn't work, check the codec
> > >from /proc/asound/card0/codec#* file, and try to pass model option
> > >values listed in ALSA-Configuration.txt.
> > 
> > I installed 1.0.15 from the website and had to add 'acer-aspire' as an
> > option inorder to get it to work. With 'acer' as the option the
> > speakers worked but the headphones didn't but 'acer-aspire' as the
> > option the speakers and headphones worked but the speakers did not mute
> > when headphones were plugged into the socket.
> > 
> > now it's working pretty okay.
> 
> Good to hear.  Could you show the output of "lspci -nv" for the audio
> device?  We can add the entry for your device so that the driver works
> without an extra model option.
> 
> 
> thanks,
> 
> Takashi