[U-Boot-Users] [PATCH 3/3] ppc4xx: Change Canyonlands to support booting from 2k page NAND devices

[Stefan Roese <sr@denx.de>]

Signed-off-by: Stefan Roese <sr@denx.de>
---
 board/amcc/canyonlands/bootstrap.c        |   13 +++++++++++++
 board/amcc/canyonlands/init.S             |    1 +
 board/amcc/canyonlands/u-boot-nand.lds    |    4 ++--
 include/configs/canyonlands.h             |   26 ++++++++++++++++----------
 nand_spl/board/amcc/canyonlands/config.mk |    6 +++---
 5 files changed, 35 insertions(+), 15 deletions(-)

diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c
index 37fa1c9..1d125b6 100644
--- a/board/amcc/canyonlands/bootstrap.c
+++ b/board/amcc/canyonlands/bootstrap.c
@@ -63,9 +63,22 @@ static u8 boot_configs[][17] = {
 /*
  * Bytes 5,6,8,9,11 change for NAND boot
  */
+#if 0
+/*
+ * Values for 512 page size NAND chips, not used anymore, just
+ * keep them here for reference
+ */
 static u8 nand_boot[] = {
 	0x90, 0x01,  0xa0, 0x68, 0x58
 };
+#else
+/*
+ * Values for 2k page size NAND chips
+ */
+static u8 nand_boot[] = {
+	0x90, 0x01,  0xa0, 0xe8, 0x58
+};
+#endif
 
 static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
diff --git a/board/amcc/canyonlands/init.S b/board/amcc/canyonlands/init.S
index bd4cab5..258fb5d 100644
--- a/board/amcc/canyonlands/init.S
+++ b/board/amcc/canyonlands/init.S
@@ -51,6 +51,7 @@ tlbtab:
 #else
 	tlbentry(CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 4, AC_R|AC_W|AC_X|SA_G)
 	tlbentry(CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(256 << 20, SZ_256M, 256 << 20, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
 #endif
 
 	/*
diff --git a/board/amcc/canyonlands/u-boot-nand.lds b/board/amcc/canyonlands/u-boot-nand.lds
index 12a5dcf..b07a828 100644
--- a/board/amcc/canyonlands/u-boot-nand.lds
+++ b/board/amcc/canyonlands/u-boot-nand.lds
@@ -57,10 +57,10 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
 
     /* Align to next NAND block */
-    . = ALIGN(0x4000);
+    . = ALIGN(0x20000);
     common/environment.o  (.ppcenv)
     /* Keep some space here for redundant env and potential bad env blocks */
-    . = ALIGN(0x10000);
+    . = ALIGN(0x80000);
 
     *(.text)
     *(.fixup)
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index a1c6674..acb9569 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -141,6 +141,9 @@
  * On 440EPx the SPL is copied to SDRAM before the NAND controller is
  * set up. While still running from cache, I experienced problems accessing
  * the NAND controller.	sr - 2006-08-25
+ *
+ * This is the first official implementation of booting from 2k page sized
+ * NAND devices (e.g. Micron 29F2G08AA 256Mbit * 8)
  */
 #define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location		      */
 #define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size		      */
@@ -153,24 +156,27 @@
 /*
  * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
  */
-#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image */
-#define CFG_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image   */
+#define CFG_NAND_U_BOOT_OFFS	(128 << 10)	/* Offset to RAM U-Boot image */
+#define CFG_NAND_U_BOOT_SIZE	(1 << 20)	/* Size of RAM U-Boot image   */
 
 /*
  * Now the NAND chip has to be defined (no autodetection used!)
  */
-#define CFG_NAND_PAGE_SIZE	512		/* NAND chip page size	      */
-#define CFG_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size	      */
-#define CFG_NAND_PAGE_COUNT	32		/* NAND chip page count	      */
-#define CFG_NAND_BAD_BLOCK_POS	5	      /* Location of bad block marker */
-#undef CFG_NAND_4_ADDR_CYCLE		      /* No fourth addr used (<=32MB) */
+#define CFG_NAND_PAGE_SIZE	(2 << 10)	/* NAND chip page size	      */
+#define CFG_NAND_BLOCK_SIZE	(128 << 10)	/* NAND chip block size	      */
+#define CFG_NAND_PAGE_COUNT	(CFG_NAND_BLOCK_SIZE / CFG_NAND_PAGE_SIZE)
+						/* NAND chip page count	      */
+#define CFG_NAND_BAD_BLOCK_POS	0		/* Location of bad block marker*/
+#define CFG_NAND_5_ADDR_CYCLE			/* Fifth addr used (<=128MB)  */
 
 #define CFG_NAND_ECCSIZE	256
 #define CFG_NAND_ECCBYTES	3
 #define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
-#define CFG_NAND_OOBSIZE	16
+#define CFG_NAND_OOBSIZE	64
 #define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
-#define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
+#define CFG_NAND_ECCPOS		{40, 41, 42, 43, 44, 45, 46, 47, \
+				 48, 49, 50, 51, 52, 53, 54, 55, \
+				 56, 57, 58, 59, 60, 61, 62, 63}
 
 #ifdef CFG_ENV_IS_IN_NAND
 /*
@@ -231,7 +237,7 @@
 #define CONFIG_DDR_ECC		1	/* with ECC support		*/
 #define CONFIG_DDR_RQDC_FIXED	0x80000038 /* fixed value for RQDC	*/
 #endif
-#define CFG_MBYTES_SDRAM        256	/* 256MB			*/
+#define CFG_MBYTES_SDRAM	512	/* 512MB			*/
 
 /*-----------------------------------------------------------------------
  * I2C
diff --git a/nand_spl/board/amcc/canyonlands/config.mk b/nand_spl/board/amcc/canyonlands/config.mk
index 6dad876..c8d7c23 100644
--- a/nand_spl/board/amcc/canyonlands/config.mk
+++ b/nand_spl/board/amcc/canyonlands/config.mk
@@ -34,9 +34,9 @@
 #
 TEXT_BASE = 0xE3003000
 
-# PAD_TO used to generate a 16kByte binary needed for the combined image
-# -> PAD_TO = TEXT_BASE + 0x4000
-PAD_TO	= 0xE3007000
+# PAD_TO used to generate a 128kByte binary needed for the combined image
+# -> PAD_TO = TEXT_BASE + 0x20000
+PAD_TO	= 0xE3023000
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
-- 
1.5.4.5