From: Borislav Petkov <petkovbb@googlemail.com>
To: bzolnier@gmail.com
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
Borislav Petkov <petkovbb@gmail.com>
Subject: [PATCH 13/16] ide-tape: convert to using the new dev_flags
Date: Sun, 29 Jun 2008 12:59:16 +0200 [thread overview]
Message-ID: <1214737159-1078-14-git-send-email-petkovbb@gmail.com> (raw)
In-Reply-To: <1214737159-1078-1-git-send-email-petkovbb@gmail.com>
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-tape.c | 68 ++++++++++++++++-------------------------------
1 files changed, 23 insertions(+), 45 deletions(-)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index e60faf3..09d8fc4 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -195,23 +195,6 @@ enum {
#define IDETAPE_BLOCK_DESCRIPTOR 0
#define IDETAPE_CAPABILITIES_PAGE 0x2a
-/* Tape flag bits values. */
-enum {
- IDETAPE_FLAG_IGNORE_DSC = (1 << 0),
- /* 0 When the tape position is unknown */
- IDETAPE_FLAG_ADDRESS_VALID = (1 << 1),
- /* Device already opened */
- IDETAPE_FLAG_BUSY = (1 << 2),
- /* Attempt to auto-detect the current user block size */
- IDETAPE_FLAG_DETECT_BS = (1 << 3),
- /* Currently on a filemark */
- IDETAPE_FLAG_FILEMARK = (1 << 4),
- /* DRQ interrupt device */
- IDETAPE_FLAG_DRQ_INTERRUPT = (1 << 5),
- /* 0 = no tape is loaded, so we don't rewind after ejecting */
- IDETAPE_FLAG_MEDIUM_PRESENT = (1 << 6),
-};
-
/*
* Most of our global data which we need to save even as we leave the driver due
* to an interrupt or a timer event is stored in the struct defined below.
@@ -312,8 +295,6 @@ typedef struct ide_tape_obj {
/* Wasted space in each stage */
int excess_bh_size;
- /* Status/Action flags: long for set_bit */
- unsigned long flags;
/* protects the ide-tape queue */
spinlock_t lock;
@@ -665,7 +646,7 @@ static void ide_tape_callback(ide_drive_t *drive)
if (readpos[0] & 0x4) {
printk(KERN_INFO "ide-tape: Block location is unknown"
"to the tape\n");
- clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
+ clear_bit(IDE_FLAG_ADDRESS_VALID, &drive->dev_flags);
uptodate = 0;
} else {
debug_log(DBG_SENSE, "Block Location - %u\n",
@@ -673,7 +654,7 @@ static void ide_tape_callback(ide_drive_t *drive)
tape->partition = readpos[1];
tape->first_frame = be32_to_cpu(*(u32 *)&readpos[4]);
- set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
+ set_bit(IDE_FLAG_ADDRESS_VALID, &drive->dev_flags);
}
}
@@ -742,7 +723,6 @@ static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
*/
static void idetape_retry_pc(ide_drive_t *drive)
{
- idetape_tape_t *tape = drive->driver_data;
struct ide_atapi_pc *pc;
struct request *rq;
@@ -750,7 +730,7 @@ static void idetape_retry_pc(ide_drive_t *drive)
pc = idetape_next_pc_storage(drive);
rq = idetape_next_rq_storage(drive);
idetape_create_request_sense_cmd(pc);
- set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
+ set_bit(IDE_FLAG_IGNORE_DSC, &drive->dev_flags);
idetape_queue_pc_head(drive, pc, rq);
}
@@ -1025,14 +1005,14 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
stat = ide_read_status(drive);
if (!drive->dsc_overlap && !(rq->cmd[13] & REQ_IDETAPE_PC2))
- set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
+ set_bit(IDE_FLAG_IGNORE_DSC, &drive->dev_flags);
if (drive->post_reset == 1) {
- set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
+ set_bit(IDE_FLAG_IGNORE_DSC, &drive->dev_flags);
drive->post_reset = 0;
}
- if (!test_and_clear_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags) &&
+ if (!test_and_clear_bit(IDE_FLAG_IGNORE_DSC, &drive->dev_flags) &&
(stat & SEEK_STAT) == 0) {
if (postponed_rq == NULL) {
tape->dsc_polling_start = jiffies;
@@ -1075,10 +1055,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
return ide_stopped;
}
BUG();
-out:
- if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags))
- pc->flags |= PC_FLAG_DRQ_INTERRUPT;
+out:
return idetape_issue_pc(drive, pc);
}
@@ -1306,7 +1284,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
int load_attempted = 0;
/* Wait for the tape to become ready */
- set_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags);
+ set_bit(IDE_FLAG_MEDIUM_PRESENT, &drive->dev_flags);
timeout += jiffies;
while (time_before(jiffies, timeout)) {
idetape_create_test_unit_ready_cmd(&pc);
@@ -1399,7 +1377,7 @@ static void __ide_tape_discard_merge_buffer(ide_drive_t *drive)
if (tape->chrdev_dir != IDETAPE_DIR_READ)
return;
- clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags);
+ clear_bit(IDE_FLAG_FILEMARK, &drive->dev_flags);
tape->merge_bh_size = 0;
if (tape->merge_bh != NULL) {
ide_tape_kfree_buffer(tape);
@@ -1638,7 +1616,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
/* If we are at a filemark, return a read length of 0 */
- if (test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
+ if (test_bit(IDE_FLAG_FILEMARK, &drive->dev_flags))
return 0;
idetape_init_read(drive);
@@ -1748,7 +1726,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
if (tape->chrdev_dir == IDETAPE_DIR_READ) {
tape->merge_bh_size = 0;
- if (test_and_clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
+ if (test_and_clear_bit(IDE_FLAG_FILEMARK, &drive->dev_flags))
++count;
ide_tape_discard_merge_buffer(drive, 0);
}
@@ -1803,7 +1781,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
if (tape->chrdev_dir != IDETAPE_DIR_READ) {
- if (test_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags))
+ if (test_bit(IDE_FLAG_DETECT_BS, &drive->dev_flags))
if (count > tape->blk_size &&
(count % tape->blk_size) == 0)
tape->user_bs_factor = count / tape->blk_size;
@@ -1843,7 +1821,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
tape->merge_bh_size = bytes_read-temp;
}
finish:
- if (!actually_read && test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags)) {
+ if (!actually_read && test_bit(IDE_FLAG_FILEMARK, &drive->dev_flags)) {
debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
idetape_space_over_filemarks(drive, MTFSF, 1);
@@ -2029,7 +2007,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
!IDETAPE_LU_LOAD_MASK);
retval = idetape_queue_pc_tail(drive, &pc);
if (!retval)
- clear_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags);
+ clear_bit(IDE_FLAG_MEDIUM_PRESENT, &drive->dev_flags);
return retval;
case MTNOP:
ide_tape_discard_merge_buffer(drive, 0);
@@ -2052,9 +2030,9 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
mt_count % tape->blk_size)
return -EIO;
tape->user_bs_factor = mt_count / tape->blk_size;
- clear_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags);
+ clear_bit(IDE_FLAG_DETECT_BS, &drive->dev_flags);
} else
- set_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags);
+ set_bit(IDE_FLAG_DETECT_BS, &drive->dev_flags);
return 0;
case MTSEEK:
ide_tape_discard_merge_buffer(drive, 0);
@@ -2201,20 +2179,20 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
filp->private_data = tape;
- if (test_and_set_bit(IDETAPE_FLAG_BUSY, &tape->flags)) {
+ if (test_and_set_bit(IDE_FLAG_BUSY, &drive->dev_flags)) {
retval = -EBUSY;
goto out_put_tape;
}
retval = idetape_wait_ready(drive, 60 * HZ);
if (retval) {
- clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
+ clear_bit(IDE_FLAG_BUSY, &drive->dev_flags);
printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
goto out_put_tape;
}
idetape_read_position(drive);
- if (!test_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags))
+ if (!test_bit(IDE_FLAG_ADDRESS_VALID, &drive->dev_flags))
(void)idetape_rewind_tape(drive);
/* Read block size and write protect status from drive. */
@@ -2230,7 +2208,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
if (tape->write_prot) {
if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
(filp->f_flags & O_ACCMODE) == O_RDWR) {
- clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
+ clear_bit(IDE_FLAG_BUSY, &drive->dev_flags);
retval = -EROFS;
goto out_put_tape;
}
@@ -2288,7 +2266,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
ide_tape_discard_merge_buffer(drive, 1);
}
- if (minor < 128 && test_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags))
+ if (minor < 128 && test_bit(IDE_FLAG_MEDIUM_PRESENT, &drive->dev_flags))
(void) idetape_rewind_tape(drive);
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
if (tape->door_locked == DOOR_LOCKED) {
@@ -2298,7 +2276,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
}
}
}
- clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
+ clear_bit(IDE_FLAG_BUSY, &drive->dev_flags);
ide_tape_put(tape);
unlock_kernel();
return 0;
@@ -2483,7 +2461,7 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
/* Command packet DRQ type */
if (((gcw[0] & 0x60) >> 5) == 1)
- set_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags);
+ set_bit(IDE_FLAG_DRQ_INTERRUPT, &drive->dev_flags);
idetape_get_inquiry_results(drive);
idetape_get_mode_sense_results(drive);
--
1.5.5.4
WARNING: multiple messages have this Message-ID (diff)
From: Borislav Petkov <petkovbb@googlemail.com>
To: <bzolnier@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
Borislav Petkov <petkovbb@gmail.com>
Subject: [PATCH 13/16] ide-tape: convert to using the new dev_flags
Date: Sun, 29 Jun 2008 12:59:16 +0200 [thread overview]
Message-ID: <1214737159-1078-14-git-send-email-petkovbb@gmail.com> (raw)
In-Reply-To: <1214737159-1078-1-git-send-email-petkovbb@gmail.com>
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-tape.c | 68 ++++++++++++++++-------------------------------
1 files changed, 23 insertions(+), 45 deletions(-)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index e60faf3..09d8fc4 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -195,23 +195,6 @@ enum {
#define IDETAPE_BLOCK_DESCRIPTOR 0
#define IDETAPE_CAPABILITIES_PAGE 0x2a
-/* Tape flag bits values. */
-enum {
- IDETAPE_FLAG_IGNORE_DSC = (1 << 0),
- /* 0 When the tape position is unknown */
- IDETAPE_FLAG_ADDRESS_VALID = (1 << 1),
- /* Device already opened */
- IDETAPE_FLAG_BUSY = (1 << 2),
- /* Attempt to auto-detect the current user block size */
- IDETAPE_FLAG_DETECT_BS = (1 << 3),
- /* Currently on a filemark */
- IDETAPE_FLAG_FILEMARK = (1 << 4),
- /* DRQ interrupt device */
- IDETAPE_FLAG_DRQ_INTERRUPT = (1 << 5),
- /* 0 = no tape is loaded, so we don't rewind after ejecting */
- IDETAPE_FLAG_MEDIUM_PRESENT = (1 << 6),
-};
-
/*
* Most of our global data which we need to save even as we leave the driver due
* to an interrupt or a timer event is stored in the struct defined below.
@@ -312,8 +295,6 @@ typedef struct ide_tape_obj {
/* Wasted space in each stage */
int excess_bh_size;
- /* Status/Action flags: long for set_bit */
- unsigned long flags;
/* protects the ide-tape queue */
spinlock_t lock;
@@ -665,7 +646,7 @@ static void ide_tape_callback(ide_drive_t *drive)
if (readpos[0] & 0x4) {
printk(KERN_INFO "ide-tape: Block location is unknown"
"to the tape\n");
- clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
+ clear_bit(IDE_FLAG_ADDRESS_VALID, &drive->dev_flags);
uptodate = 0;
} else {
debug_log(DBG_SENSE, "Block Location - %u\n",
@@ -673,7 +654,7 @@ static void ide_tape_callback(ide_drive_t *drive)
tape->partition = readpos[1];
tape->first_frame = be32_to_cpu(*(u32 *)&readpos[4]);
- set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
+ set_bit(IDE_FLAG_ADDRESS_VALID, &drive->dev_flags);
}
}
@@ -742,7 +723,6 @@ static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
*/
static void idetape_retry_pc(ide_drive_t *drive)
{
- idetape_tape_t *tape = drive->driver_data;
struct ide_atapi_pc *pc;
struct request *rq;
@@ -750,7 +730,7 @@ static void idetape_retry_pc(ide_drive_t *drive)
pc = idetape_next_pc_storage(drive);
rq = idetape_next_rq_storage(drive);
idetape_create_request_sense_cmd(pc);
- set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
+ set_bit(IDE_FLAG_IGNORE_DSC, &drive->dev_flags);
idetape_queue_pc_head(drive, pc, rq);
}
@@ -1025,14 +1005,14 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
stat = ide_read_status(drive);
if (!drive->dsc_overlap && !(rq->cmd[13] & REQ_IDETAPE_PC2))
- set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
+ set_bit(IDE_FLAG_IGNORE_DSC, &drive->dev_flags);
if (drive->post_reset == 1) {
- set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
+ set_bit(IDE_FLAG_IGNORE_DSC, &drive->dev_flags);
drive->post_reset = 0;
}
- if (!test_and_clear_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags) &&
+ if (!test_and_clear_bit(IDE_FLAG_IGNORE_DSC, &drive->dev_flags) &&
(stat & SEEK_STAT) == 0) {
if (postponed_rq == NULL) {
tape->dsc_polling_start = jiffies;
@@ -1075,10 +1055,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
return ide_stopped;
}
BUG();
-out:
- if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags))
- pc->flags |= PC_FLAG_DRQ_INTERRUPT;
+out:
return idetape_issue_pc(drive, pc);
}
@@ -1306,7 +1284,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
int load_attempted = 0;
/* Wait for the tape to become ready */
- set_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags);
+ set_bit(IDE_FLAG_MEDIUM_PRESENT, &drive->dev_flags);
timeout += jiffies;
while (time_before(jiffies, timeout)) {
idetape_create_test_unit_ready_cmd(&pc);
@@ -1399,7 +1377,7 @@ static void __ide_tape_discard_merge_buffer(ide_drive_t *drive)
if (tape->chrdev_dir != IDETAPE_DIR_READ)
return;
- clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags);
+ clear_bit(IDE_FLAG_FILEMARK, &drive->dev_flags);
tape->merge_bh_size = 0;
if (tape->merge_bh != NULL) {
ide_tape_kfree_buffer(tape);
@@ -1638,7 +1616,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
/* If we are at a filemark, return a read length of 0 */
- if (test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
+ if (test_bit(IDE_FLAG_FILEMARK, &drive->dev_flags))
return 0;
idetape_init_read(drive);
@@ -1748,7 +1726,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
if (tape->chrdev_dir == IDETAPE_DIR_READ) {
tape->merge_bh_size = 0;
- if (test_and_clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
+ if (test_and_clear_bit(IDE_FLAG_FILEMARK, &drive->dev_flags))
++count;
ide_tape_discard_merge_buffer(drive, 0);
}
@@ -1803,7 +1781,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
if (tape->chrdev_dir != IDETAPE_DIR_READ) {
- if (test_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags))
+ if (test_bit(IDE_FLAG_DETECT_BS, &drive->dev_flags))
if (count > tape->blk_size &&
(count % tape->blk_size) == 0)
tape->user_bs_factor = count / tape->blk_size;
@@ -1843,7 +1821,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
tape->merge_bh_size = bytes_read-temp;
}
finish:
- if (!actually_read && test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags)) {
+ if (!actually_read && test_bit(IDE_FLAG_FILEMARK, &drive->dev_flags)) {
debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
idetape_space_over_filemarks(drive, MTFSF, 1);
@@ -2029,7 +2007,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
!IDETAPE_LU_LOAD_MASK);
retval = idetape_queue_pc_tail(drive, &pc);
if (!retval)
- clear_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags);
+ clear_bit(IDE_FLAG_MEDIUM_PRESENT, &drive->dev_flags);
return retval;
case MTNOP:
ide_tape_discard_merge_buffer(drive, 0);
@@ -2052,9 +2030,9 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
mt_count % tape->blk_size)
return -EIO;
tape->user_bs_factor = mt_count / tape->blk_size;
- clear_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags);
+ clear_bit(IDE_FLAG_DETECT_BS, &drive->dev_flags);
} else
- set_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags);
+ set_bit(IDE_FLAG_DETECT_BS, &drive->dev_flags);
return 0;
case MTSEEK:
ide_tape_discard_merge_buffer(drive, 0);
@@ -2201,20 +2179,20 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
filp->private_data = tape;
- if (test_and_set_bit(IDETAPE_FLAG_BUSY, &tape->flags)) {
+ if (test_and_set_bit(IDE_FLAG_BUSY, &drive->dev_flags)) {
retval = -EBUSY;
goto out_put_tape;
}
retval = idetape_wait_ready(drive, 60 * HZ);
if (retval) {
- clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
+ clear_bit(IDE_FLAG_BUSY, &drive->dev_flags);
printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
goto out_put_tape;
}
idetape_read_position(drive);
- if (!test_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags))
+ if (!test_bit(IDE_FLAG_ADDRESS_VALID, &drive->dev_flags))
(void)idetape_rewind_tape(drive);
/* Read block size and write protect status from drive. */
@@ -2230,7 +2208,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
if (tape->write_prot) {
if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
(filp->f_flags & O_ACCMODE) == O_RDWR) {
- clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
+ clear_bit(IDE_FLAG_BUSY, &drive->dev_flags);
retval = -EROFS;
goto out_put_tape;
}
@@ -2288,7 +2266,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
ide_tape_discard_merge_buffer(drive, 1);
}
- if (minor < 128 && test_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags))
+ if (minor < 128 && test_bit(IDE_FLAG_MEDIUM_PRESENT, &drive->dev_flags))
(void) idetape_rewind_tape(drive);
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
if (tape->door_locked == DOOR_LOCKED) {
@@ -2298,7 +2276,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
}
}
}
- clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
+ clear_bit(IDE_FLAG_BUSY, &drive->dev_flags);
ide_tape_put(tape);
unlock_kernel();
return 0;
@@ -2483,7 +2461,7 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
/* Command packet DRQ type */
if (((gcw[0] & 0x60) >> 5) == 1)
- set_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags);
+ set_bit(IDE_FLAG_DRQ_INTERRUPT, &drive->dev_flags);
idetape_get_inquiry_results(drive);
idetape_get_mode_sense_results(drive);
--
1.5.5.4
next prev parent reply other threads:[~2008-06-29 10:59 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-29 10:59 [PATCH 00/16] Generic ide device flags Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` [PATCH 01/16] ide: push pc callback pointer into the ide_drive_t structure Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` [PATCH 02/16] ide-floppy: use drive->pc_callback instead of pc->callback Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` [PATCH 03/16] ide-tape: " Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` [PATCH 04/16] ide-scsi: " Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` [PATCH 05/16] ide: remove pc->callback member from ide_atapi_pc Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` [PATCH 06/16] ide-floppy: pass packet command in rq->cmd Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` [PATCH 07/16] ide-tape: make room for packet command ids " Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` [PATCH 08/16] ide-tape: pass packet command " Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` [PATCH 09/16] ide-scsi: " Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` [PATCH 10/16] ide: use rq->cmd instead of pc->c in atapi common code Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` [PATCH 11/16] ide: add per-device flags Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` [PATCH 12/16] ide-floppy: convert to using the new dev_flags Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov [this message]
2008-06-29 10:59 ` [PATCH 13/16] ide-tape: " Borislav Petkov
2008-06-29 10:59 ` [PATCH 14/16] ide-scsi: " Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` [PATCH 15/16] ide: remove unused PC_FLAG_DRQ_INTERRUPT Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-29 10:59 ` [PATCH 16/16] ide-cd: convert to using the new dev_flags Borislav Petkov
2008-06-29 10:59 ` Borislav Petkov
2008-06-30 20:44 ` [PATCH 00/16] Generic ide device flags Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1214737159-1078-14-git-send-email-petkovbb@gmail.com \
--to=petkovbb@googlemail.com \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=petkovbb@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.