Re: Temporarily squelching multipathd errors

Re: Temporarily squelching multipathd errors

[Christophe Varoqui]

> Greetings,
>  
> I perform SAN-based snapshots on OCFS2 and ext3 filesystems under
> dm-multipath.  Before I snapshot the filesystem, I unmount and delete
> the previous night's snapshot LUNs.  Doing so causes (correctly)
> multipathd to output the following errors:
>  
> <snip>
> ...
> Jul 14 03:16:02 ausracdbd01 multipathd: mpath19: remaining active paths:
> 7
> Jul 14 03:16:02 ausracdbd01 multipathd: sdci: tur checker reports path
> is down
> Jul 14 03:16:02 ausracdbd01 kernel: device-mapper: multipath: Failing
> path 69:80.
> Jul 14 03:16:02 ausracdbd01 multipathd: sdco: tur checker reports path
> is down
> ....
> </snip>
>  
> During this snapshot time, I would like to temporarily turn off the
> verbosity of multipathd.  Is this possible?  It's mostly an annoyance
> factor for me because our nightly centralized syslog scan picks up words
> like 'fail' and generates a report to the system administrators (which
> we then have to ignore for these messages).
> 
Why not just remove the multipath from the multipathd topology before deleting the snapvol ?

multipathd -k"del map mpath19"

Regards,
cvaroqui

RE: Temporarily squelching multipathd errors

[Daniel Keisling]

When adding or removing LUNs, I always get multiple multipath messages
reporting that a path is down, sometimes even to devices that I have not
removed.  I've tried removing all the SCSI devices (via "echo 1
>/sys/bus/devices/$DEVICE/delete"), flushing the multipath maps,
removing the mpath in question (via "multipathd -k"dep map $mpath"),
prior to unpresenting the LUN or doing a SCSI rescan when presenting a
LUN, all to no avail.

What is proper procedure to completely remove all SCSI devices and
multipath maps so that multipathd will not generate error messages when
the LUN is unpresented from the system?

TIA,

Daniel


> -----Original Message-----
> From: Christophe Varoqui [mailto:christophe.varoqui@free.fr] 
> Sent: Saturday, July 19, 2008 3:28 AM
> To: Daniel Keisling
> Cc: device-mapper development
> Subject: Re: Temporarily squelching multipathd errors
> 
> 
> > Greetings,
> >  
> > I perform SAN-based snapshots on OCFS2 and ext3 filesystems under
> > dm-multipath.  Before I snapshot the filesystem, I unmount 
> and delete
> > the previous night's snapshot LUNs.  Doing so causes (correctly)
> > multipathd to output the following errors:
> >  
> > <snip>
> > ...
> > Jul 14 03:16:02 ausracdbd01 multipathd: mpath19: remaining 
> active paths:
> > 7
> > Jul 14 03:16:02 ausracdbd01 multipathd: sdci: tur checker 
> reports path
> > is down
> > Jul 14 03:16:02 ausracdbd01 kernel: device-mapper: 
> multipath: Failing
> > path 69:80.
> > Jul 14 03:16:02 ausracdbd01 multipathd: sdco: tur checker 
> reports path
> > is down
> > ....
> > </snip>
> >  
> > During this snapshot time, I would like to temporarily turn off the
> > verbosity of multipathd.  Is this possible?  It's mostly an 
> annoyance
> > factor for me because our nightly centralized syslog scan 
> picks up words
> > like 'fail' and generates a report to the system 
> administrators (which
> > we then have to ignore for these messages).
> > 
> Why not just remove the multipath from the multipathd 
> topology before deleting the snapvol ?
> 
> multipathd -k"del map mpath19"
> 
> Regards,
> cvaroqui
> 
> 
> 

______________________________________________________________________
This email transmission and any documents, files or previous email
messages attached to it may contain information that is confidential or
legally privileged. If you are not the intended recipient or a person
responsible for delivering this transmission to the intended recipient,
you are hereby notified that you must not read this transmission and
that any disclosure, copying, printing, distribution or use of this
transmission is strictly prohibited. If you have received this transmission
in error, please immediately notify the sender by telephone or return email
and delete the original transmission and its attachments without reading
or saving in any manner.

RE: Temporarily squelching multipathd errors

[Domenico Viggiani]

> From Daniel Keisling:
>
> What is proper procedure to completely remove all SCSI 
> devices and multipath maps so that multipathd will not 
> generate error messages when the LUN is unpresented from the system?

This is my recipe:

- Take a note of "multipath -ll" output (SCSI-IDs, long multipath
identifiers, etc)
- Umount filesystem
- Deactivate VG
	vgchange -an vg_XXX
- Export VG
	vgexport vg_XXX
- Remove multipath
	multipath -f <long-multipath-identifier>
- Unpresent/destroy array LUN
- Remove SCSI devices
	echo 1 > /sys/bus/scsi/drivers/sd/<SCSI-ID>/delete
	... (for all paths)
- Edit fstab


--
Domenico Viggiani

RE: RE: Temporarily squelching multipathd errors

[Daniel Keisling]

I am still getting multipath errors when unpresenting and presenting
LUNs.  I've traced it down to getting path failures everytime I either
remove or add a LUN to the system.  The strange thing is that I get path
errors for maps that aren't related to the LUNs I am deleting or adding.
In this case, I am deleting the LUN with the map 'mpath18,' but other
maps complain whenever the LUN is deleted:

Nov 21 13:47:05 ausracdbd01 multipathd: checker failed path 67:208 in
map orabackup_hs
Nov 21 13:47:05 ausracdbd01 kernel: device-mapper: multipath: Failing
path 67:208.
Nov 21 13:47:08 ausracdbd01 multipathd: checker failed path 70:160 in
map mpath18
Nov 21 13:47:08 ausracdbd01 kernel: device-mapper: multipath: Failing
path 70:160.
Nov 21 13:47:09 ausracdbd01 multipathd: checker failed path 69:0 in map
orabackup_hs
Nov 21 13:47:09 ausracdbd01 kernel: device-mapper: multipath: Failing
path 69:0.
Nov 21 13:47:10 ausracdbd01 multipathd: checker failed path 65:192 in
map ph1d
Nov 21 13:47:10 ausracdbd01 kernel: device-mapper: multipath: Failing
path 65:192.
Nov 21 13:47:10 ausracdbd01 multipathd: checker failed path 65:224 in
map limsd
Nov 21 13:47:10 ausracdbd01 kernel: device-mapper: multipath: Failing
path 65:224.
Nov 21 13:47:10 ausracdbd01 multipathd: checker failed path 65:240 in
map limsd_arch


Sometimes I only get 5-10 "checker failed path" errors, other times I
get 30+.  

Can anyone give me any advice?  These are OCFS2 filesystems on RHEL5
attached to a HP EVA8000.  

[root@ausracdbd01 ~]# rpm -qa | grep mapper 
device-mapper-1.02.20-1.el5 
device-mapper-1.02.20-1.el5 
device-mapper-multipath-0.4.7-12.el5 

Relevant /etc/multipath.conf entries:
### HP Storageworks Arrays.
defaults {
        udev_dir                /dev
        polling_interval        10
        selector                "round-robin 0"
        path_grouping_policy    failover
        getuid_callout          "/sbin/scsi_id -g -u -s /block/%n"
        prio_callout            "/bin/true"
        path_checker            tur
        rr_min_io               100
        rr_weight               uniform
        failback                immediate
        no_path_retry           12
        user_friendly_names     yes
        bindings_file           "/var/lib/multipath/bindings"


devices {

        # For EVA3000(HSV101) / EVA5000(HSV111) / EVA4000/6000 / EVA8000
        device {
                vendor                  "HP|COMPAQ"
        product                 "HSV1[01]1 \(C\)COMPAQ|HSV[23][01]0"
        path_grouping_policy    group_by_prio
        getuid_callout          "/sbin/scsi_id -g -u -s /block/%n"
        path_checker            tur
        path_selector           "round-robin 0"
        prio_callout            "/sbin/mpath_prio_alua /dev/%n"
        rr_weight               uniform
        failback                immediate
        hardware_handler        "0"
        no_path_retry           12
        }



TIA,

Daniel

> -----Original Message-----
> From: dm-devel-bounces@redhat.com 
> [mailto:dm-devel-bounces@redhat.com] On Behalf Of Domenico Viggiani
> Sent: Thursday, October 30, 2008 11:15 AM
> To: 'device-mapper development'
> Subject: [dm-devel] RE: Temporarily squelching multipathd errors
> 
> > From Daniel Keisling:
> >
> > What is proper procedure to completely remove all SCSI 
> > devices and multipath maps so that multipathd will not 
> > generate error messages when the LUN is unpresented from the system?
> 
> This is my recipe:
> 
> - Take a note of "multipath -ll" output (SCSI-IDs, long multipath
> identifiers, etc)
> - Umount filesystem
> - Deactivate VG
> 	vgchange -an vg_XXX
> - Export VG
> 	vgexport vg_XXX
> - Remove multipath
> 	multipath -f <long-multipath-identifier>
> - Unpresent/destroy array LUN
> - Remove SCSI devices
> 	echo 1 > /sys/bus/scsi/drivers/sd/<SCSI-ID>/delete
> 	... (for all paths)
> - Edit fstab
> 
> 
> --
> Domenico Viggiani
> 
> --
> dm-devel mailing list
> dm-devel@redhat.com
> https://www.redhat.com/mailman/listinfo/dm-devel
> 
> 

______________________________________________________________________
This email transmission and any documents, files or previous email
messages attached to it may contain information that is confidential or
legally privileged. If you are not the intended recipient or a person
responsible for delivering this transmission to the intended recipient,
you are hereby notified that you must not read this transmission and
that any disclosure, copying, printing, distribution or use of this
transmission is strictly prohibited. If you have received this transmission
in error, please immediately notify the sender by telephone or return email
and delete the original transmission and its attachments without reading
or saving in any manner.

Re: RE: Temporarily squelching multipathd errors

[Konrad Rzeszutek]

On Fri, Nov 21, 2008 at 01:54:01PM -0600, Daniel Keisling wrote:
> I am still getting multipath errors when unpresenting and presenting
> LUNs.  I've traced it down to getting path failures everytime I either
> remove or add a LUN to the system.  The strange thing is that I get path
> errors for maps that aren't related to the LUNs I am deleting or adding.
> In this case, I am deleting the LUN with the map 'mpath18,' but other
> maps complain whenever the LUN is deleted:
> 
> Nov 21 13:47:05 ausracdbd01 multipathd: checker failed path 67:208 in
> map orabackup_hs
> Nov 21 13:47:05 ausracdbd01 kernel: device-mapper: multipath: Failing
> path 67:208.
> Nov 21 13:47:08 ausracdbd01 multipathd: checker failed path 70:160 in
> map mpath18
> Nov 21 13:47:08 ausracdbd01 kernel: device-mapper: multipath: Failing
> path 70:160.
> Nov 21 13:47:09 ausracdbd01 multipathd: checker failed path 69:0 in map
> orabackup_hs
> Nov 21 13:47:09 ausracdbd01 kernel: device-mapper: multipath: Failing
> path 69:0.
> Nov 21 13:47:10 ausracdbd01 multipathd: checker failed path 65:192 in
> map ph1d
> Nov 21 13:47:10 ausracdbd01 kernel: device-mapper: multipath: Failing
> path 65:192.
> Nov 21 13:47:10 ausracdbd01 multipathd: checker failed path 65:224 in
> map limsd
> Nov 21 13:47:10 ausracdbd01 kernel: device-mapper: multipath: Failing
> path 65:224.
> Nov 21 13:47:10 ausracdbd01 multipathd: checker failed path 65:240 in
> map limsd_arch
> 

Can you attach the 'multipath -ll' output? Run the program before
you delete/add the LUNs and after, please.

How do you delete/add the LUNs? Are you re-using the LUN number, or are you
actually deleting a LUN, deleting the block device as well, and then
when adding (with a new LUN number higher than the deleted one), rescanning 
the SCSI host channel to get the new block device for the LUN?

RE: RE: Temporarily squelching multipathd errors

[Daniel Keisling]

Right now I'm deleting the LUN, immediately creating a new LUN, and
presenting it back to the system with the same SCSI ID.  Since it's a
snapshot, the LUN geometry is always the same.  I've tried unpresenting
the LUN, deleting the SCSI devices, recreating/presenting the LUN, and
then doing a SCSI rescan, but the multipath errors are always there.  

Here's the multipath listings.  I am only deleting/presenting the
"mpath33" map, but you can see the multipath errors and the other paths
having a fault:

Unmounting /dev/mapper/mpath33p1...
Multipath listing before LUN is deleted...
cred_arch (3600508b400106fcd0000700011f30000) dm-52 HP,HSV210
[size=5.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 1:0:4:17 sdgh 131:208 [active][ready]
 \_ 0:0:4:17 sdfx 131:48  [active][ready]
 \_ 0:0:6:17 sdgb 131:112 [active][ready]
 \_ 1:0:3:17 sdgf 131:176 [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:3:17 sdfv 131:16  [active][ready]
 \_ 0:0:5:17 sdfz 131:80  [active][ready]
 \_ 1:0:2:17 sdgd 131:144 [active][ready]
 \_ 1:0:5:17 sdgj 131:240 [active][ready]
mpath19 (3600508b400106fcc000070002acb0000) dm-31 HP,HSV210
[size=10G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:71 sdap 66:144  [active][ready]
 \_ 0:0:6:71 sdch 69:80   [active][ready]
 \_ 1:0:3:71 sddz 128:16  [active][ready]
 \_ 1:0:4:71 sdev 129:112 [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:71 sdbl 67:240  [active][ready]
 \_ 1:0:2:71 sddd 70:176  [active][ready]
 \_ 1:0:5:71 sdfr 130:208 [active][ready]
 \_ 0:0:3:71 sdt  65:48   [active][ready]
mpath21 (3600508b400106fcc000070002ac30000) dm-35 HP,HSV210
[size=90G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:73 sdar 66:176  [active][ready]
 \_ 0:0:6:73 sdcj 69:112  [active][ready]
 \_ 1:0:3:73 sdeb 128:48  [active][ready]
 \_ 1:0:4:73 sdex 129:144 [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:73 sdbn 68:16   [active][ready]
 \_ 1:0:2:73 sddf 70:208  [active][ready]
 \_ 1:0:5:73 sdft 130:240 [active][ready]
 \_ 0:0:3:73 sdv  65:80   [active][ready]
limsd (3600508b400106fcc0000700027b30000) dm-7 HP,HSV210
[size=80G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:9  sdad 65:208  [active][ready]
 \_ 0:0:6:9  sdbv 68:144  [active][ready]
 \_ 1:0:3:9  sddn 71:80   [active][ready]
 \_ 1:0:4:9  sdej 128:176 [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:9  sdaz 67:48   [active][ready]
 \_ 1:0:2:9  sdcr 69:240  [active][ready]
 \_ 1:0:5:9  sdff 130:16  [active][ready]
 \_ 0:0:3:9  sdh  8:112   [active][ready]
ph1t_arch (3600508b400106fcd0000700006880000) dm-23 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:20 sdal 66:80   [active][ready]
 \_ 0:0:6:20 sdcd 69:16   [active][ready]
 \_ 1:0:3:20 sddv 71:208  [active][ready]
 \_ 1:0:4:20 sder 129:48  [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:20 sdbh 67:176  [active][ready]
 \_ 1:0:2:20 sdcz 70:112  [active][ready]
 \_ 1:0:5:20 sdfn 130:144 [active][ready]
 \_ 0:0:3:20 sdp  8:240   [active][ready]
mpath18 (3600508b400106fcc000070002acf0000) dm-30 HP,HSV210
[size=30G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:70 sdao 66:128  [active][ready]
 \_ 0:0:6:70 sdcg 69:64   [active][ready]
 \_ 1:0:3:70 sddy 128:0   [active][ready]
 \_ 1:0:4:70 sdeu 129:96  [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:70 sdbk 67:224  [active][ready]
 \_ 1:0:2:70 sddc 70:160  [active][ready]
 \_ 1:0:5:70 sdfq 130:192 [active][ready]
 \_ 0:0:3:70 sds  65:32   [active][ready]
mpath20 (3600508b400106fcc000070002ac70000) dm-33 HP,HSV210
[size=80G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:72 sdaq 66:160  [active][ready]
 \_ 0:0:6:72 sdci 69:96   [active][ready]
 \_ 1:0:3:72 sdea 128:32  [active][ready]
 \_ 1:0:4:72 sdew 129:128 [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:72 sdbm 68:0    [active][ready]
 \_ 1:0:2:72 sdde 70:192  [active][ready]
 \_ 1:0:5:72 sdfs 130:224 [active][ready]
 \_ 0:0:3:72 sdu  65:64   [active][ready]
cret_arch (3600508b400106fcc0000700027c20000) dm-12 HP,HSV210
[size=5.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:12 sdag 66:0    [active][ready]
 \_ 0:0:6:12 sdby 68:192  [active][ready]
 \_ 1:0:3:12 sddq 71:128  [active][ready]
 \_ 1:0:4:12 sdem 128:224 [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:12 sdbc 67:96   [active][ready]
 \_ 1:0:2:12 sdcu 70:32   [active][ready]
 \_ 1:0:5:12 sdfi 130:64  [active][ready]
 \_ 0:0:3:12 sdk  8:160   [active][ready]
raw3 (3600508b400106fcc0000700027a20000) dm-4 HP,HSV210
[size=4.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:5  sdaa 65:160  [active][ready]
 \_ 0:0:6:5  sdbs 68:96   [active][ready]
 \_ 1:0:3:5  sddk 71:32   [active][ready]
 \_ 1:0:4:5  sdeg 128:128 [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:5  sdaw 67:0    [active][ready]
 \_ 1:0:2:5  sdco 69:192  [active][ready]
 \_ 0:0:3:5  sde  8:64    [active][ready]
 \_ 1:0:5:5  sdfc 129:224 [active][ready]
case (3600508b400106fcc0000700027c50000) dm-14 HP,HSV210
[size=30G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:13 sdah 66:16   [active][ready]
 \_ 0:0:6:13 sdbz 68:208  [active][ready]
 \_ 1:0:3:13 sddr 71:144  [active][ready]
 \_ 1:0:4:13 sden 128:240 [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:13 sdbd 67:112  [active][ready]
 \_ 1:0:2:13 sdcv 70:48   [active][ready]
 \_ 1:0:5:13 sdfj 130:80  [active][ready]
 \_ 0:0:3:13 sdl  8:176   [active][ready]
limsd_arch (3600508b400106fcc0000700027b60000) dm-9 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:10 sdae 65:224  [active][ready]
 \_ 0:0:6:10 sdbw 68:160  [active][ready]
 \_ 1:0:3:10 sddo 71:96   [active][ready]
 \_ 1:0:4:10 sdek 128:192 [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:10 sdba 67:64   [active][ready]
 \_ 1:0:2:10 sdcs 70:0    [active][ready]
 \_ 1:0:5:10 sdfg 130:32  [active][ready]
 \_ 0:0:3:10 sdi  8:128   [active][ready]
mpath33 (3600508b400106fcd0000700012030000) dm-55 HP,HSV210
[size=20G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:74 sdgl 132:16  [active][ready]
 \_ 0:0:6:74 sdgn 132:48  [active][ready]
 \_ 1:0:3:74 sdgp 132:80  [active][ready]
 \_ 1:0:4:74 sdgq 132:96  [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 1:0:2:74 sdgo 132:64  [active][ready]
 \_ 0:0:3:74 sdgk 132:0   [active][ready]
 \_ 0:0:5:74 sdgm 132:32  [active][ready]
 \_ 1:0:5:74 sdgr 132:112 [active][ready]
raw2 (3600508b400106fcc00007000279f0000) dm-44 HP,HSV210
[size=4.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:6:4  sdbr 68:80   [active][ready]
 \_ 1:0:3:4  sddj 71:16   [active][ready]
 \_ 1:0:4:4  sdef 128:112 [active][ready]
 \_ 0:0:4:4  sdz  65:144  [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:4  sdav 66:240  [active][ready]
 \_ 1:0:2:4  sdcn 69:176  [active][ready]
 \_ 0:0:3:4  sdd  8:48    [active][ready]
 \_ 1:0:5:4  sdfb 129:208 [active][ready]
raw1 (3600508b400106fcc0000700027940000) dm-42 HP,HSV210
[size=4.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:6:3  sdbq 68:64   [active][ready]
 \_ 1:0:3:3  sddi 71:0    [active][ready]
 \_ 1:0:4:3  sdee 128:96  [active][ready]
 \_ 0:0:4:3  sdy  65:128  [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:3  sdau 66:224  [active][ready]
 \_ 1:0:2:3  sdcm 69:160  [active][ready]
 \_ 0:0:3:3  sdc  8:32    [active][ready]
 \_ 1:0:5:3  sdfa 129:192 [active][ready]
cret (3600508b400106fcc0000700027bd0000) dm-11 HP,HSV210
[size=10G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:11 sdaf 65:240  [active][ready]
 \_ 0:0:6:11 sdbx 68:176  [active][ready]
 \_ 1:0:3:11 sddp 71:112  [active][ready]
 \_ 1:0:4:11 sdel 128:208 [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:11 sdbb 67:80   [active][ready]
 \_ 1:0:2:11 sdct 70:16   [active][ready]
 \_ 1:0:5:11 sdfh 130:48  [active][ready]
 \_ 0:0:3:11 sdj  8:144   [active][ready]
case_arch (3600508b400106fcc0000700027ca0000) dm-16 HP,HSV210
[size=5.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:14 sdai 66:32   [active][ready]
 \_ 0:0:6:14 sdca 68:224  [active][ready]
 \_ 1:0:3:14 sdds 71:160  [active][ready]
 \_ 1:0:4:14 sdeo 129:0   [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:14 sdbe 67:128  [active][ready]
 \_ 1:0:2:14 sdcw 70:64   [active][ready]
 \_ 1:0:5:14 sdfk 130:96  [active][ready]
 \_ 0:0:3:14 sdm  8:192   [active][ready]
limst_arch (3600508b400106fcd0000700006920000) dm-26 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:22 sdan 66:112  [active][ready]
 \_ 0:0:6:22 sdcf 69:48   [active][ready]
 \_ 1:0:3:22 sddx 71:240  [active][ready]
 \_ 1:0:4:22 sdet 129:80  [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:22 sdbj 67:208  [active][ready]
 \_ 1:0:2:22 sddb 70:144  [active][ready]
 \_ 1:0:5:22 sdfp 130:176 [active][ready]
 \_ 0:0:3:22 sdr  65:16   [active][ready]
orabackup (3600508b400106fcd000070000a560000) dm-19 HP,HSV210
[size=150G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:5:15 sdbf 67:144  [active][ready]
 \_ 1:0:2:15 sdcx 70:80   [active][ready]
 \_ 1:0:5:15 sdfl 130:112 [active][ready]
 \_ 0:0:3:15 sdn  8:208   [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:4:15 sdaj 66:48   [active][ready]
 \_ 0:0:6:15 sdcb 68:240  [active][ready]
 \_ 1:0:3:15 sddt 71:176  [active][ready]
 \_ 1:0:4:15 sdep 129:16  [active][ready]
oracle_bin (3600508b400106fcc0000700027810000) dm-36 HP,HSV210
[size=50G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:6:1  sdbo 68:32   [active][ready]
 \_ 1:0:3:1  sddg 70:224  [active][ready]
 \_ 1:0:4:1  sdec 128:64  [active][ready]
 \_ 0:0:4:1  sdw  65:96   [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:1  sdas 66:192  [active][ready]
 \_ 0:0:3:1  sda  8:0     [active][ready]
 \_ 1:0:2:1  sdck 69:128  [active][ready]
 \_ 1:0:5:1  sdey 129:160 [active][ready]
ph1t (3600508b400106fcd0000700006830000) dm-21 HP,HSV210
[size=150G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:19 sdak 66:64   [active][ready]
 \_ 0:0:6:19 sdcc 69:0    [active][ready]
 \_ 1:0:3:19 sddu 71:192  [active][ready]
 \_ 1:0:4:19 sdeq 129:32  [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:19 sdbg 67:160  [active][ready]
 \_ 1:0:2:19 sdcy 70:96   [active][ready]
 \_ 1:0:5:19 sdfm 130:128 [active][ready]
 \_ 0:0:3:19 sdo  8:224   [active][ready]
cred (3600508b400106fcd0000700011ee0000) dm-51 HP,HSV210
[size=20G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 1:0:3:16 sdge 131:160 [active][ready]
 \_ 0:0:4:16 sdfw 131:32  [active][ready]
 \_ 0:0:6:16 sdga 131:96  [active][ready]
 \_ 1:0:4:16 sdgg 131:192 [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:3:16 sdfu 131:0   [active][ready]
 \_ 0:0:5:16 sdfy 131:64  [active][ready]
 \_ 1:0:2:16 sdgc 131:128 [active][ready]
 \_ 1:0:5:16 sdgi 131:224 [active][ready]
oracle_crs (3600508b400106fcc00007000278b0000) dm-39 HP,HSV210
[size=50G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:6:2  sdbp 68:48   [active][ready]
 \_ 1:0:3:2  sddh 70:240  [active][ready]
 \_ 1:0:4:2  sded 128:80  [active][ready]
 \_ 0:0:4:2  sdx  65:112  [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:2  sdat 66:208  [active][ready]
 \_ 0:0:3:2  sdb  8:16    [active][ready]
 \_ 1:0:2:2  sdcl 69:144  [active][ready]
 \_ 1:0:5:2  sdez 129:176 [active][ready]
limst (3600508b400106fcd00007000068d0000) dm-24 HP,HSV210
[size=400G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:5:21 sdbi 67:192  [active][ready]
 \_ 1:0:2:21 sdda 70:128  [active][ready]
 \_ 1:0:5:21 sdfo 130:160 [active][ready]
 \_ 0:0:3:21 sdq  65:0    [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:4:21 sdam 66:96   [active][ready]
 \_ 0:0:6:21 sdce 69:32   [active][ready]
 \_ 1:0:3:21 sddw 71:224  [active][ready]
 \_ 1:0:4:21 sdes 129:64  [active][ready]
ph1d (3600508b400106fcc0000700027a50000) dm-5 HP,HSV210
[size=90G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:7  sdab 65:176  [active][ready]
 \_ 0:0:6:7  sdbt 68:112  [active][ready]
 \_ 1:0:3:7  sddl 71:48   [active][ready]
 \_ 1:0:4:7  sdeh 128:144 [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:7  sdax 67:16   [active][ready]
 \_ 1:0:2:7  sdcp 69:208  [active][ready]
 \_ 1:0:5:7  sdfd 129:240 [active][ready]
 \_ 0:0:3:7  sdf  8:80    [active][ready]
ph1d_arch (3600508b400106fcc0000700027a80000) dm-6 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:8  sdac 65:192  [active][ready]
 \_ 0:0:6:8  sdbu 68:128  [active][ready]
 \_ 1:0:3:8  sddm 71:64   [active][ready]
 \_ 1:0:4:8  sdei 128:160 [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:8  sday 67:32   [active][ready]
 \_ 1:0:2:8  sdcq 69:224  [active][ready]
 \_ 1:0:5:8  sdfe 130:0   [active][ready]
 \_ 0:0:3:8  sdg  8:96    [active][ready]


Multipath listing after LUN is deleted and before LUN is added...

sdab: checker msg is "tur checker reports path is down"
sdae: checker msg is "tur checker reports path is down"
sdaf: checker msg is "tur checker reports path is down"
sdah: checker msg is "tur checker reports path is down"
sdaj: checker msg is "tur checker reports path is down"
sdal: checker msg is "tur checker reports path is down"
sdam: checker msg is "tur checker reports path is down"
sdan: checker msg is "tur checker reports path is down"
sdap: checker msg is "tur checker reports path is down"
sdar: checker msg is "tur checker reports path is down"
sdas: checker msg is "tur checker reports path is down"
sdat: checker msg is "tur checker reports path is down"
sdau: checker msg is "tur checker reports path is down"
sdav: checker msg is "tur checker reports path is down"
sdaw: checker msg is "tur checker reports path is down"
sdax: checker msg is "tur checker reports path is down"
sday: checker msg is "tur checker reports path is down"
sdaz: checker msg is "tur checker reports path is down"
sda: checker msg is "tur checker reports path is down"
sdba: checker msg is "tur checker reports path is down"
sdbb: checker msg is "tur checker reports path is down"
sdbc: checker msg is "tur checker reports path is down"
sdbd: checker msg is "tur checker reports path is down"
sdbe: checker msg is "tur checker reports path is down"
sdbf: checker msg is "tur checker reports path is down"
sdbg: checker msg is "tur checker reports path is down"
sdbh: checker msg is "tur checker reports path is down"
sdbi: checker msg is "tur checker reports path is down"
sdbj: checker msg is "tur checker reports path is down"
sdbk: checker msg is "tur checker reports path is down"
sdbl: checker msg is "tur checker reports path is down"
sdbm: checker msg is "tur checker reports path is down"
sdbn: checker msg is "tur checker reports path is down"
sdbo: checker msg is "tur checker reports path is down"
sdbp: checker msg is "tur checker reports path is down"
sdbs: checker msg is "tur checker reports path is down"
sdbt: checker msg is "tur checker reports path is down"
sdbu: checker msg is "tur checker reports path is down"
sdbv: checker msg is "tur checker reports path is down"
sdbw: checker msg is "tur checker reports path is down"
sdby: checker msg is "tur checker reports path is down"
sdb: checker msg is "tur checker reports path is down"
sdca: checker msg is "tur checker reports path is down"
sdcb: checker msg is "tur checker reports path is down"
sdcc: checker msg is "tur checker reports path is down"
sdcd: checker msg is "tur checker reports path is down"
sdce: checker msg is "tur checker reports path is down"
sdcg: checker msg is "tur checker reports path is down"
sdch: checker msg is "tur checker reports path is down"
sdci: checker msg is "tur checker reports path is down"
sdck: checker msg is "tur checker reports path is down"
sdcl: checker msg is "tur checker reports path is down"
sdcm: checker msg is "tur checker reports path is down"
sdcn: checker msg is "tur checker reports path is down"
sdco: checker msg is "tur checker reports path is down"
sdcp: checker msg is "tur checker reports path is down"
sdcq: checker msg is "tur checker reports path is down"
sdcr: checker msg is "tur checker reports path is down"
sdcs: checker msg is "tur checker reports path is down"
sdct: checker msg is "tur checker reports path is down"
sdcu: checker msg is "tur checker reports path is down"
sdcv: checker msg is "tur checker reports path is down"
sdcw: checker msg is "tur checker reports path is down"
sdcx: checker msg is "tur checker reports path is down"
sdcy: checker msg is "tur checker reports path is down"
sdcz: checker msg is "tur checker reports path is down"
sdc: checker msg is "tur checker reports path is down"
sddb: checker msg is "tur checker reports path is down"
sddc: checker msg is "tur checker reports path is down"
sddd: checker msg is "tur checker reports path is down"
sdde: checker msg is "tur checker reports path is down"
sddf: checker msg is "tur checker reports path is down"
sddg: checker msg is "tur checker reports path is down"
sddh: checker msg is "tur checker reports path is down"
sddi: checker msg is "tur checker reports path is down"
sddj: checker msg is "tur checker reports path is down"
sddk: checker msg is "tur checker reports path is down"
sddl: checker msg is "tur checker reports path is down"
sddm: checker msg is "tur checker reports path is down"
sddn: checker msg is "tur checker reports path is down"
sddp: checker msg is "tur checker reports path is down"
sddq: checker msg is "tur checker reports path is down"
sddr: checker msg is "tur checker reports path is down"
sdds: checker msg is "tur checker reports path is down"
sddt: checker msg is "tur checker reports path is down"
sddu: checker msg is "tur checker reports path is down"
sddv: checker msg is "tur checker reports path is down"
sddw: checker msg is "tur checker reports path is down"
sddx: checker msg is "tur checker reports path is down"
sddy: checker msg is "tur checker reports path is down"
sdd: checker msg is "tur checker reports path is down"
sdea: checker msg is "tur checker reports path is down"
sdeb: checker msg is "tur checker reports path is down"
sdec: checker msg is "tur checker reports path is down"
sded: checker msg is "tur checker reports path is down"
sdee: checker msg is "tur checker reports path is down"
sdef: checker msg is "tur checker reports path is down"
sdeg: checker msg is "tur checker reports path is down"
sdei: checker msg is "tur checker reports path is down"
sdej: checker msg is "tur checker reports path is down"
sdek: checker msg is "tur checker reports path is down"
sdel: checker msg is "tur checker reports path is down"
sdem: checker msg is "tur checker reports path is down"
sden: checker msg is "tur checker reports path is down"
sdeo: checker msg is "tur checker reports path is down"
sdep: checker msg is "tur checker reports path is down"
sdes: checker msg is "tur checker reports path is down"
sdet: checker msg is "tur checker reports path is down"
sdeu: checker msg is "tur checker reports path is down"
sdev: checker msg is "tur checker reports path is down"
sdew: checker msg is "tur checker reports path is down"
sdex: checker msg is "tur checker reports path is down"
sdey: checker msg is "tur checker reports path is down"
sdez: checker msg is "tur checker reports path is down"
sde: checker msg is "tur checker reports path is down"
sdfa: checker msg is "tur checker reports path is down"
sdfb: checker msg is "tur checker reports path is down"
sdfc: checker msg is "tur checker reports path is down"
sdfd: checker msg is "tur checker reports path is down"
sdfe: checker msg is "tur checker reports path is down"
sdff: checker msg is "tur checker reports path is down"
sdfg: checker msg is "tur checker reports path is down"
sdfh: checker msg is "tur checker reports path is down"
sdfi: checker msg is "tur checker reports path is down"
sdfj: checker msg is "tur checker reports path is down"
sdfk: checker msg is "tur checker reports path is down"
sdfl: checker msg is "tur checker reports path is down"
sdfm: checker msg is "tur checker reports path is down"
sdfn: checker msg is "tur checker reports path is down"
sdfo: checker msg is "tur checker reports path is down"
sdfp: checker msg is "tur checker reports path is down"
sdfq: checker msg is "tur checker reports path is down"
sdfr: checker msg is "tur checker reports path is down"
sdfs: checker msg is "tur checker reports path is down"
sdft: checker msg is "tur checker reports path is down"
sdfv: checker msg is "tur checker reports path is down"
sdfz: checker msg is "tur checker reports path is down"
sdf: checker msg is "tur checker reports path is down"
sdgb: checker msg is "tur checker reports path is down"
sdgd: checker msg is "tur checker reports path is down"
sdge: checker msg is "tur checker reports path is down"
sdgf: checker msg is "tur checker reports path is down"
sdgg: checker msg is "tur checker reports path is down"
sdgh: checker msg is "tur checker reports path is down"
sdgi: checker msg is "tur checker reports path is down"
sdgj: checker msg is "tur checker reports path is down"
sdgk: checker msg is "tur checker reports path is down"
sdgl: checker msg is "tur checker reports path is down"
sdgm: checker msg is "tur checker reports path is down"
sdgn: checker msg is "tur checker reports path is down"
sdgo: checker msg is "tur checker reports path is down"
sdgp: checker msg is "tur checker reports path is down"
sdgq: checker msg is "tur checker reports path is down"
sdgr: checker msg is "tur checker reports path is down"
sdg: checker msg is "tur checker reports path is down"
sdh: checker msg is "tur checker reports path is down"
sdi: checker msg is "tur checker reports path is down"
sdj: checker msg is "tur checker reports path is down"
sdk: checker msg is "tur checker reports path is down"
sdl: checker msg is "tur checker reports path is down"
sdm: checker msg is "tur checker reports path is down"
sdn: checker msg is "tur checker reports path is down"
sdo: checker msg is "tur checker reports path is down"
sdp: checker msg is "tur checker reports path is down"
sdr: checker msg is "tur checker reports path is down"
sds: checker msg is "tur checker reports path is down"
sdt: checker msg is "tur checker reports path is down"
sdu: checker msg is "tur checker reports path is down"
sdv: checker msg is "tur checker reports path is down"
sdx: checker msg is "tur checker reports path is down"
sdy: checker msg is "tur checker reports path is down"
sdz: checker msg is "tur checker reports path is down"
cred_arch (3600508b400106fcd0000700011f30000) dm-52 HP,HSV210
[size=5.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 1:0:4:17 sdgh 131:208 [active][faulty]
 \_ 0:0:4:17 sdfx 131:48  [active][ready] 
 \_ 0:0:6:17 sdgb 131:112 [active][faulty]
 \_ 1:0:3:17 sdgf 131:176 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:3:17 sdfv 131:16  [active][faulty]
 \_ 0:0:5:17 sdfz 131:80  [active][faulty]
 \_ 1:0:2:17 sdgd 131:144 [active][faulty]
 \_ 1:0:5:17 sdgj 131:240 [active][faulty]
mpath19 (3600508b400106fcc000070002acb0000) dm-31 HP,HSV210
[size=10G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:71 sdap 66:144  [active][faulty]
 \_ 0:0:6:71 sdch 69:80   [active][faulty]
 \_ 1:0:3:71 sddz 128:16  [active][ready] 
 \_ 1:0:4:71 sdev 129:112 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:71 sdbl 67:240  [active][faulty]
 \_ 1:0:2:71 sddd 70:176  [active][faulty]
 \_ 1:0:5:71 sdfr 130:208 [active][faulty]
 \_ 0:0:3:71 sdt  65:48   [active][faulty]
mpath21 (3600508b400106fcc000070002ac30000) dm-35 HP,HSV210
[size=90G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:73 sdar 66:176  [active][faulty]
 \_ 0:0:6:73 sdcj 69:112  [active][ready] 
 \_ 1:0:3:73 sdeb 128:48  [active][faulty]
 \_ 1:0:4:73 sdex 129:144 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:73 sdbn 68:16   [active][faulty]
 \_ 1:0:2:73 sddf 70:208  [active][faulty]
 \_ 1:0:5:73 sdft 130:240 [active][faulty]
 \_ 0:0:3:73 sdv  65:80   [active][faulty]
limsd (3600508b400106fcc0000700027b30000) dm-7 HP,HSV210
[size=80G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:9  sdad 65:208  [active][ready] 
 \_ 0:0:6:9  sdbv 68:144  [active][faulty]
 \_ 1:0:3:9  sddn 71:80   [active][faulty]
 \_ 1:0:4:9  sdej 128:176 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:9  sdaz 67:48   [active][faulty]
 \_ 1:0:2:9  sdcr 69:240  [active][faulty]
 \_ 1:0:5:9  sdff 130:16  [active][faulty]
 \_ 0:0:3:9  sdh  8:112   [active][faulty]
ph1t_arch (3600508b400106fcd0000700006880000) dm-23 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:20 sdal 66:80   [active][faulty]
 \_ 0:0:6:20 sdcd 69:16   [active][faulty]
 \_ 1:0:3:20 sddv 71:208  [active][faulty]
 \_ 1:0:4:20 sder 129:48  [active][ready] 
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:20 sdbh 67:176  [active][faulty]
 \_ 1:0:2:20 sdcz 70:112  [active][faulty]
 \_ 1:0:5:20 sdfn 130:144 [active][faulty]
 \_ 0:0:3:20 sdp  8:240   [active][faulty]
mpath18 (3600508b400106fcc000070002acf0000) dm-30 HP,HSV210
[size=30G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:70 sdao 66:128  [active][ready] 
 \_ 0:0:6:70 sdcg 69:64   [active][faulty]
 \_ 1:0:3:70 sddy 128:0   [active][faulty]
 \_ 1:0:4:70 sdeu 129:96  [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:70 sdbk 67:224  [active][faulty]
 \_ 1:0:2:70 sddc 70:160  [active][faulty]
 \_ 1:0:5:70 sdfq 130:192 [active][faulty]
 \_ 0:0:3:70 sds  65:32   [active][faulty]
mpath20 (3600508b400106fcc000070002ac70000) dm-33 HP,HSV210
[size=80G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:72 sdaq 66:160  [active][ready] 
 \_ 0:0:6:72 sdci 69:96   [active][faulty]
 \_ 1:0:3:72 sdea 128:32  [active][faulty]
 \_ 1:0:4:72 sdew 129:128 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:72 sdbm 68:0    [active][faulty]
 \_ 1:0:2:72 sdde 70:192  [active][faulty]
 \_ 1:0:5:72 sdfs 130:224 [active][faulty]
 \_ 0:0:3:72 sdu  65:64   [active][faulty]
cret_arch (3600508b400106fcc0000700027c20000) dm-12 HP,HSV210
[size=5.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:12 sdag 66:0    [active][ready] 
 \_ 0:0:6:12 sdby 68:192  [active][faulty]
 \_ 1:0:3:12 sddq 71:128  [active][faulty]
 \_ 1:0:4:12 sdem 128:224 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:12 sdbc 67:96   [active][faulty]
 \_ 1:0:2:12 sdcu 70:32   [active][faulty]
 \_ 1:0:5:12 sdfi 130:64  [active][faulty]
 \_ 0:0:3:12 sdk  8:160   [active][faulty]
raw3 (3600508b400106fcc0000700027a20000) dm-4 HP,HSV210
[size=4.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:5  sdaa 65:160  [active][ready] 
 \_ 0:0:6:5  sdbs 68:96   [active][faulty]
 \_ 1:0:3:5  sddk 71:32   [active][faulty]
 \_ 1:0:4:5  sdeg 128:128 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:5  sdaw 67:0    [active][faulty]
 \_ 1:0:2:5  sdco 69:192  [active][faulty]
 \_ 0:0:3:5  sde  8:64    [active][faulty]
 \_ 1:0:5:5  sdfc 129:224 [active][faulty]
case (3600508b400106fcc0000700027c50000) dm-14 HP,HSV210
[size=30G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:13 sdah 66:16   [active][faulty]
 \_ 0:0:6:13 sdbz 68:208  [active][ready] 
 \_ 1:0:3:13 sddr 71:144  [active][faulty]
 \_ 1:0:4:13 sden 128:240 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:13 sdbd 67:112  [active][faulty]
 \_ 1:0:2:13 sdcv 70:48   [active][faulty]
 \_ 1:0:5:13 sdfj 130:80  [active][faulty]
 \_ 0:0:3:13 sdl  8:176   [active][faulty]
limsd_arch (3600508b400106fcc0000700027b60000) dm-9 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:10 sdae 65:224  [active][faulty]
 \_ 0:0:6:10 sdbw 68:160  [active][faulty]
 \_ 1:0:3:10 sddo 71:96   [active][ready] 
 \_ 1:0:4:10 sdek 128:192 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:10 sdba 67:64   [active][faulty]
 \_ 1:0:2:10 sdcs 70:0    [active][faulty]
 \_ 1:0:5:10 sdfg 130:32  [active][faulty]
 \_ 0:0:3:10 sdi  8:128   [active][faulty]
mpath33 (3600508b400106fcd0000700012030000) dm-55 HP,HSV210
[size=20G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=0][active]
 \_ 0:0:4:74 sdgl 132:16  [active][faulty]
 \_ 0:0:6:74 sdgn 132:48  [active][faulty]
 \_ 1:0:3:74 sdgp 132:80  [active][faulty]
 \_ 1:0:4:74 sdgq 132:96  [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 1:0:2:74 sdgo 132:64  [active][faulty]
 \_ 0:0:3:74 sdgk 132:0   [active][faulty]
 \_ 0:0:5:74 sdgm 132:32  [active][faulty]
 \_ 1:0:5:74 sdgr 132:112 [active][faulty]
raw2 (3600508b400106fcc00007000279f0000) dm-44 HP,HSV210
[size=4.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:6:4  sdbr 68:80   [active][ready] 
 \_ 1:0:3:4  sddj 71:16   [active][faulty]
 \_ 1:0:4:4  sdef 128:112 [active][faulty]
 \_ 0:0:4:4  sdz  65:144  [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:4  sdav 66:240  [active][faulty]
 \_ 1:0:2:4  sdcn 69:176  [active][faulty]
 \_ 0:0:3:4  sdd  8:48    [active][faulty]
 \_ 1:0:5:4  sdfb 129:208 [active][faulty]
raw1 (3600508b400106fcc0000700027940000) dm-42 HP,HSV210
[size=4.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:6:3  sdbq 68:64   [active][ready] 
 \_ 1:0:3:3  sddi 71:0    [active][faulty]
 \_ 1:0:4:3  sdee 128:96  [active][faulty]
 \_ 0:0:4:3  sdy  65:128  [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:3  sdau 66:224  [active][faulty]
 \_ 1:0:2:3  sdcm 69:160  [active][faulty]
 \_ 0:0:3:3  sdc  8:32    [active][faulty]
 \_ 1:0:5:3  sdfa 129:192 [active][faulty]
cret (3600508b400106fcc0000700027bd0000) dm-11 HP,HSV210
[size=10G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:11 sdaf 65:240  [active][faulty]
 \_ 0:0:6:11 sdbx 68:176  [active][ready] 
 \_ 1:0:3:11 sddp 71:112  [active][faulty]
 \_ 1:0:4:11 sdel 128:208 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:11 sdbb 67:80   [active][faulty]
 \_ 1:0:2:11 sdct 70:16   [active][faulty]
 \_ 1:0:5:11 sdfh 130:48  [active][faulty]
 \_ 0:0:3:11 sdj  8:144   [active][faulty]
case_arch (3600508b400106fcc0000700027ca0000) dm-16 HP,HSV210
[size=5.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:14 sdai 66:32   [active][ready] 
 \_ 0:0:6:14 sdca 68:224  [active][faulty]
 \_ 1:0:3:14 sdds 71:160  [active][faulty]
 \_ 1:0:4:14 sdeo 129:0   [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:14 sdbe 67:128  [active][faulty]
 \_ 1:0:2:14 sdcw 70:64   [active][faulty]
 \_ 1:0:5:14 sdfk 130:96  [active][faulty]
 \_ 0:0:3:14 sdm  8:192   [active][faulty]
limst_arch (3600508b400106fcd0000700006920000) dm-26 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:22 sdan 66:112  [active][faulty]
 \_ 0:0:6:22 sdcf 69:48   [active][ready] 
 \_ 1:0:3:22 sddx 71:240  [active][faulty]
 \_ 1:0:4:22 sdet 129:80  [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:22 sdbj 67:208  [active][faulty]
 \_ 1:0:2:22 sddb 70:144  [active][faulty]
 \_ 1:0:5:22 sdfp 130:176 [active][faulty]
 \_ 0:0:3:22 sdr  65:16   [active][faulty]
orabackup (3600508b400106fcd000070000a560000) dm-19 HP,HSV210
[size=150G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=0][active]
 \_ 0:0:5:15 sdbf 67:144  [active][faulty]
 \_ 1:0:2:15 sdcx 70:80   [active][faulty]
 \_ 1:0:5:15 sdfl 130:112 [active][faulty]
 \_ 0:0:3:15 sdn  8:208   [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:4:15 sdaj 66:48   [active][faulty]
 \_ 0:0:6:15 sdcb 68:240  [active][faulty]
 \_ 1:0:3:15 sddt 71:176  [active][faulty]
 \_ 1:0:4:15 sdep 129:16  [active][faulty]
oracle_bin (3600508b400106fcc0000700027810000) dm-36 HP,HSV210
[size=50G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:6:1  sdbo 68:32   [active][faulty]
 \_ 1:0:3:1  sddg 70:224  [active][faulty]
 \_ 1:0:4:1  sdec 128:64  [active][faulty]
 \_ 0:0:4:1  sdw  65:96   [active][ready] 
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:1  sdas 66:192  [active][faulty]
 \_ 0:0:3:1  sda  8:0     [active][faulty]
 \_ 1:0:2:1  sdck 69:128  [active][faulty]
 \_ 1:0:5:1  sdey 129:160 [active][faulty]
ph1t (3600508b400106fcd0000700006830000) dm-21 HP,HSV210
[size=150G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=100][active]
 \_ 0:0:4:19 sdak 66:64   [active][ready] 
 \_ 0:0:6:19 sdcc 69:0    [active][faulty]
 \_ 1:0:3:19 sddu 71:192  [active][faulty]
 \_ 1:0:4:19 sdeq 129:32  [active][ready] 
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:19 sdbg 67:160  [active][faulty]
 \_ 1:0:2:19 sdcy 70:96   [active][faulty]
 \_ 1:0:5:19 sdfm 130:128 [active][faulty]
 \_ 0:0:3:19 sdo  8:224   [active][faulty]
cred (3600508b400106fcd0000700011ee0000) dm-51 HP,HSV210
[size=20G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=100][active]
 \_ 1:0:3:16 sdge 131:160 [active][faulty]
 \_ 0:0:4:16 sdfw 131:32  [active][ready] 
 \_ 0:0:6:16 sdga 131:96  [active][ready] 
 \_ 1:0:4:16 sdgg 131:192 [active][faulty]
\_ round-robin 0 [prio=30][enabled]
 \_ 0:0:3:16 sdfu 131:0   [active][ready] 
 \_ 0:0:5:16 sdfy 131:64  [active][ready] 
 \_ 1:0:2:16 sdgc 131:128 [active][ready] 
 \_ 1:0:5:16 sdgi 131:224 [active][faulty]
oracle_crs (3600508b400106fcc00007000278b0000) dm-39 HP,HSV210
[size=50G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=0][active]
 \_ 0:0:6:2  sdbp 68:48   [active][faulty]
 \_ 1:0:3:2  sddh 70:240  [active][faulty]
 \_ 1:0:4:2  sded 128:80  [active][faulty]
 \_ 0:0:4:2  sdx  65:112  [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:2  sdat 66:208  [active][faulty]
 \_ 0:0:3:2  sdb  8:16    [active][faulty]
 \_ 1:0:2:2  sdcl 69:144  [active][faulty]
 \_ 1:0:5:2  sdez 129:176 [active][faulty]
limst (3600508b400106fcd00007000068d0000) dm-24 HP,HSV210
[size=400G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=100][active]
 \_ 0:0:5:21 sdbi 67:192  [active][faulty]
 \_ 1:0:2:21 sdda 70:128  [active][ready] 
 \_ 1:0:5:21 sdfo 130:160 [active][faulty]
 \_ 0:0:3:21 sdq  65:0    [active][ready] 
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:4:21 sdam 66:96   [active][faulty]
 \_ 0:0:6:21 sdce 69:32   [active][faulty]
 \_ 1:0:3:21 sddw 71:224  [active][faulty]
 \_ 1:0:4:21 sdes 129:64  [active][faulty]
ph1d (3600508b400106fcc0000700027a50000) dm-5 HP,HSV210
[size=90G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:7  sdab 65:176  [active][faulty]
 \_ 0:0:6:7  sdbt 68:112  [active][faulty]
 \_ 1:0:3:7  sddl 71:48   [active][faulty]
 \_ 1:0:4:7  sdeh 128:144 [active][ready] 
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:7  sdax 67:16   [active][faulty]
 \_ 1:0:2:7  sdcp 69:208  [active][faulty]
 \_ 1:0:5:7  sdfd 129:240 [active][faulty]
 \_ 0:0:3:7  sdf  8:80    [active][faulty]
ph1d_arch (3600508b400106fcc0000700027a80000) dm-6 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:8  sdac 65:192  [active][ready] 
 \_ 0:0:6:8  sdbu 68:128  [active][faulty]
 \_ 1:0:3:8  sddm 71:64   [active][faulty]
 \_ 1:0:4:8  sdei 128:160 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:8  sday 67:32   [active][faulty]
 \_ 1:0:2:8  sdcq 69:224  [active][faulty]
 \_ 1:0:5:8  sdfe 130:0   [active][faulty]
 \_ 0:0:3:8  sdg  8:96    [active][faulty]


Multipath output after LUN is added...

sdab: checker msg is "tur checker reports path is down"
sdae: checker msg is "tur checker reports path is down"
sdaf: checker msg is "tur checker reports path is down"
sdaj: checker msg is "tur checker reports path is down"
sdak: checker msg is "tur checker reports path is down"
sdal: checker msg is "tur checker reports path is down"
sdam: checker msg is "tur checker reports path is down"
sdan: checker msg is "tur checker reports path is down"
sdap: checker msg is "tur checker reports path is down"
sdar: checker msg is "tur checker reports path is down"
sdas: checker msg is "tur checker reports path is down"
sdat: checker msg is "tur checker reports path is down"
sdau: checker msg is "tur checker reports path is down"
sdav: checker msg is "tur checker reports path is down"
sdaw: checker msg is "tur checker reports path is down"
sdax: checker msg is "tur checker reports path is down"
sday: checker msg is "tur checker reports path is down"
sdaz: checker msg is "tur checker reports path is down"
sda: checker msg is "tur checker reports path is down"
sdba: checker msg is "tur checker reports path is down"
sdbb: checker msg is "tur checker reports path is down"
sdbc: checker msg is "tur checker reports path is down"
sdbd: checker msg is "tur checker reports path is down"
sdbe: checker msg is "tur checker reports path is down"
sdbf: checker msg is "tur checker reports path is down"
sdbg: checker msg is "tur checker reports path is down"
sdbh: checker msg is "tur checker reports path is down"
sdbi: checker msg is "tur checker reports path is down"
sdbj: checker msg is "tur checker reports path is down"
sdbk: checker msg is "tur checker reports path is down"
sdbl: checker msg is "tur checker reports path is down"
sdbm: checker msg is "tur checker reports path is down"
sdbn: checker msg is "tur checker reports path is down"
sdbo: checker msg is "tur checker reports path is down"
sdbp: checker msg is "tur checker reports path is down"
sdbs: checker msg is "tur checker reports path is down"
sdbt: checker msg is "tur checker reports path is down"
sdbu: checker msg is "tur checker reports path is down"
sdbv: checker msg is "tur checker reports path is down"
sdbw: checker msg is "tur checker reports path is down"
sdby: checker msg is "tur checker reports path is down"
sdbz: checker msg is "tur checker reports path is down"
sdb: checker msg is "tur checker reports path is down"
sdca: checker msg is "tur checker reports path is down"
sdcb: checker msg is "tur checker reports path is down"
sdcc: checker msg is "tur checker reports path is down"
sdcd: checker msg is "tur checker reports path is down"
sdce: checker msg is "tur checker reports path is down"
sdcg: checker msg is "tur checker reports path is down"
sdch: checker msg is "tur checker reports path is down"
sdci: checker msg is "tur checker reports path is down"
sdck: checker msg is "tur checker reports path is down"
sdcl: checker msg is "tur checker reports path is down"
sdcm: checker msg is "tur checker reports path is down"
sdcn: checker msg is "tur checker reports path is down"
sdco: checker msg is "tur checker reports path is down"
sdcp: checker msg is "tur checker reports path is down"
sdcq: checker msg is "tur checker reports path is down"
sdcr: checker msg is "tur checker reports path is down"
sdcs: checker msg is "tur checker reports path is down"
sdct: checker msg is "tur checker reports path is down"
sdcu: checker msg is "tur checker reports path is down"
sdcv: checker msg is "tur checker reports path is down"
sdcw: checker msg is "tur checker reports path is down"
sdcx: checker msg is "tur checker reports path is down"
sdcy: checker msg is "tur checker reports path is down"
sdcz: checker msg is "tur checker reports path is down"
sdc: checker msg is "tur checker reports path is down"
sddb: checker msg is "tur checker reports path is down"
sddc: checker msg is "tur checker reports path is down"
sddd: checker msg is "tur checker reports path is down"
sdde: checker msg is "tur checker reports path is down"
sddf: checker msg is "tur checker reports path is down"
sddg: checker msg is "tur checker reports path is down"
sddh: checker msg is "tur checker reports path is down"
sddi: checker msg is "tur checker reports path is down"
sddj: checker msg is "tur checker reports path is down"
sddk: checker msg is "tur checker reports path is down"
sddm: checker msg is "tur checker reports path is down"
sddn: checker msg is "tur checker reports path is down"
sddp: checker msg is "tur checker reports path is down"
sddq: checker msg is "tur checker reports path is down"
sddr: checker msg is "tur checker reports path is down"
sdds: checker msg is "tur checker reports path is down"
sddt: checker msg is "tur checker reports path is down"
sddu: checker msg is "tur checker reports path is down"
sddv: checker msg is "tur checker reports path is down"
sddw: checker msg is "tur checker reports path is down"
sddx: checker msg is "tur checker reports path is down"
sddy: checker msg is "tur checker reports path is down"
sdd: checker msg is "tur checker reports path is down"
sdea: checker msg is "tur checker reports path is down"
sdeb: checker msg is "tur checker reports path is down"
sdee: checker msg is "tur checker reports path is down"
sdef: checker msg is "tur checker reports path is down"
sdeg: checker msg is "tur checker reports path is down"
sdeh: checker msg is "tur checker reports path is down"
sdei: checker msg is "tur checker reports path is down"
sdej: checker msg is "tur checker reports path is down"
sdek: checker msg is "tur checker reports path is down"
sdel: checker msg is "tur checker reports path is down"
sdem: checker msg is "tur checker reports path is down"
sden: checker msg is "tur checker reports path is down"
sdeo: checker msg is "tur checker reports path is down"
sdep: checker msg is "tur checker reports path is down"
sdes: checker msg is "tur checker reports path is down"
sdet: checker msg is "tur checker reports path is down"
sdeu: checker msg is "tur checker reports path is down"
sdev: checker msg is "tur checker reports path is down"
sdew: checker msg is "tur checker reports path is down"
sdex: checker msg is "tur checker reports path is down"
sdey: checker msg is "tur checker reports path is down"
sdez: checker msg is "tur checker reports path is down"
sde: checker msg is "tur checker reports path is down"
sdfa: checker msg is "tur checker reports path is down"
sdfb: checker msg is "tur checker reports path is down"
sdfc: checker msg is "tur checker reports path is down"
sdfd: checker msg is "tur checker reports path is down"
sdfe: checker msg is "tur checker reports path is down"
sdff: checker msg is "tur checker reports path is down"
sdfg: checker msg is "tur checker reports path is down"
sdfh: checker msg is "tur checker reports path is down"
sdfi: checker msg is "tur checker reports path is down"
sdfj: checker msg is "tur checker reports path is down"
sdfk: checker msg is "tur checker reports path is down"
sdfl: checker msg is "tur checker reports path is down"
sdfm: checker msg is "tur checker reports path is down"
sdfn: checker msg is "tur checker reports path is down"
sdfo: checker msg is "tur checker reports path is down"
sdfp: checker msg is "tur checker reports path is down"
sdfq: checker msg is "tur checker reports path is down"
sdfr: checker msg is "tur checker reports path is down"
sdfs: checker msg is "tur checker reports path is down"
sdft: checker msg is "tur checker reports path is down"
sdfv: checker msg is "tur checker reports path is down"
sdfz: checker msg is "tur checker reports path is down"
sdf: checker msg is "tur checker reports path is down"
sdgb: checker msg is "tur checker reports path is down"
sdgd: checker msg is "tur checker reports path is down"
sdge: checker msg is "tur checker reports path is down"
sdgf: checker msg is "tur checker reports path is down"
sdgg: checker msg is "tur checker reports path is down"
sdgh: checker msg is "tur checker reports path is down"
sdgi: checker msg is "tur checker reports path is down"
sdgj: checker msg is "tur checker reports path is down"
sdgk: checker msg is "tur checker reports path is down"
sdgl: checker msg is "tur checker reports path is down"
sdgm: checker msg is "tur checker reports path is down"
sdgn: checker msg is "tur checker reports path is down"
sdgo: checker msg is "tur checker reports path is down"
sdgp: checker msg is "tur checker reports path is down"
sdgq: checker msg is "tur checker reports path is down"
sdgr: checker msg is "tur checker reports path is down"
sdg: checker msg is "tur checker reports path is down"
sdh: checker msg is "tur checker reports path is down"
sdi: checker msg is "tur checker reports path is down"
sdj: checker msg is "tur checker reports path is down"
sdk: checker msg is "tur checker reports path is down"
sdl: checker msg is "tur checker reports path is down"
sdm: checker msg is "tur checker reports path is down"
sdn: checker msg is "tur checker reports path is down"
sdo: checker msg is "tur checker reports path is down"
sdp: checker msg is "tur checker reports path is down"
sdq: checker msg is "tur checker reports path is down"
sdr: checker msg is "tur checker reports path is down"
sds: checker msg is "tur checker reports path is down"
sdt: checker msg is "tur checker reports path is down"
sdu: checker msg is "tur checker reports path is down"
sdv: checker msg is "tur checker reports path is down"
sdx: checker msg is "tur checker reports path is down"
cred_arch (3600508b400106fcd0000700011f30000) dm-52 HP,HSV210
[size=5.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 1:0:4:17 sdgh 131:208 [active][faulty]
 \_ 0:0:4:17 sdfx 131:48  [active][ready] 
 \_ 0:0:6:17 sdgb 131:112 [active][faulty]
 \_ 1:0:3:17 sdgf 131:176 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:3:17 sdfv 131:16  [active][faulty]
 \_ 0:0:5:17 sdfz 131:80  [active][faulty]
 \_ 1:0:2:17 sdgd 131:144 [active][faulty]
 \_ 1:0:5:17 sdgj 131:240 [active][faulty]
mpath19 (3600508b400106fcc000070002acb0000) dm-31 HP,HSV210
[size=10G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:71 sdap 66:144  [active][faulty]
 \_ 0:0:6:71 sdch 69:80   [active][faulty]
 \_ 1:0:3:71 sddz 128:16  [active][ready] 
 \_ 1:0:4:71 sdev 129:112 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:71 sdbl 67:240  [active][faulty]
 \_ 1:0:2:71 sddd 70:176  [active][faulty]
 \_ 1:0:5:71 sdfr 130:208 [active][faulty]
 \_ 0:0:3:71 sdt  65:48   [active][faulty]
mpath21 (3600508b400106fcc000070002ac30000) dm-35 HP,HSV210
[size=90G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:73 sdar 66:176  [active][faulty]
 \_ 0:0:6:73 sdcj 69:112  [active][ready] 
 \_ 1:0:3:73 sdeb 128:48  [active][faulty]
 \_ 1:0:4:73 sdex 129:144 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:73 sdbn 68:16   [active][faulty]
 \_ 1:0:2:73 sddf 70:208  [active][faulty]
 \_ 1:0:5:73 sdft 130:240 [active][faulty]
 \_ 0:0:3:73 sdv  65:80   [active][faulty]
limsd (3600508b400106fcc0000700027b30000) dm-7 HP,HSV210
[size=80G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:9  sdad 65:208  [active][ready] 
 \_ 0:0:6:9  sdbv 68:144  [active][faulty]
 \_ 1:0:3:9  sddn 71:80   [active][faulty]
 \_ 1:0:4:9  sdej 128:176 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:9  sdaz 67:48   [active][faulty]
 \_ 1:0:2:9  sdcr 69:240  [active][faulty]
 \_ 1:0:5:9  sdff 130:16  [active][faulty]
 \_ 0:0:3:9  sdh  8:112   [active][faulty]
ph1t_arch (3600508b400106fcd0000700006880000) dm-23 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:20 sdal 66:80   [active][faulty]
 \_ 0:0:6:20 sdcd 69:16   [active][faulty]
 \_ 1:0:3:20 sddv 71:208  [active][faulty]
 \_ 1:0:4:20 sder 129:48  [active][ready] 
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:20 sdbh 67:176  [active][faulty]
 \_ 1:0:2:20 sdcz 70:112  [active][faulty]
 \_ 1:0:5:20 sdfn 130:144 [active][faulty]
 \_ 0:0:3:20 sdp  8:240   [active][faulty]
mpath18 (3600508b400106fcc000070002acf0000) dm-30 HP,HSV210
[size=30G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:70 sdao 66:128  [active][ready] 
 \_ 0:0:6:70 sdcg 69:64   [active][faulty]
 \_ 1:0:3:70 sddy 128:0   [active][faulty]
 \_ 1:0:4:70 sdeu 129:96  [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:70 sdbk 67:224  [active][faulty]
 \_ 1:0:2:70 sddc 70:160  [active][faulty]
 \_ 1:0:5:70 sdfq 130:192 [active][faulty]
 \_ 0:0:3:70 sds  65:32   [active][faulty]
mpath20 (3600508b400106fcc000070002ac70000) dm-33 HP,HSV210
[size=80G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:72 sdaq 66:160  [active][ready] 
 \_ 0:0:6:72 sdci 69:96   [active][faulty]
 \_ 1:0:3:72 sdea 128:32  [active][faulty]
 \_ 1:0:4:72 sdew 129:128 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:72 sdbm 68:0    [active][faulty]
 \_ 1:0:2:72 sdde 70:192  [active][faulty]
 \_ 1:0:5:72 sdfs 130:224 [active][faulty]
 \_ 0:0:3:72 sdu  65:64   [active][faulty]
cret_arch (3600508b400106fcc0000700027c20000) dm-12 HP,HSV210
[size=5.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:12 sdag 66:0    [active][ready] 
 \_ 0:0:6:12 sdby 68:192  [active][faulty]
 \_ 1:0:3:12 sddq 71:128  [active][faulty]
 \_ 1:0:4:12 sdem 128:224 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:12 sdbc 67:96   [active][faulty]
 \_ 1:0:2:12 sdcu 70:32   [active][faulty]
 \_ 1:0:5:12 sdfi 130:64  [active][faulty]
 \_ 0:0:3:12 sdk  8:160   [active][faulty]
raw3 (3600508b400106fcc0000700027a20000) dm-4 HP,HSV210
[size=4.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:5  sdaa 65:160  [active][ready] 
 \_ 0:0:6:5  sdbs 68:96   [active][faulty]
 \_ 1:0:3:5  sddk 71:32   [active][faulty]
 \_ 1:0:4:5  sdeg 128:128 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:5  sdaw 67:0    [active][faulty]
 \_ 1:0:2:5  sdco 69:192  [active][faulty]
 \_ 0:0:3:5  sde  8:64    [active][faulty]
 \_ 1:0:5:5  sdfc 129:224 [active][faulty]
case (3600508b400106fcc0000700027c50000) dm-14 HP,HSV210
[size=30G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:13 sdah 66:16   [active][ready] 
 \_ 0:0:6:13 sdbz 68:208  [active][faulty]
 \_ 1:0:3:13 sddr 71:144  [active][faulty]
 \_ 1:0:4:13 sden 128:240 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:13 sdbd 67:112  [active][faulty]
 \_ 1:0:2:13 sdcv 70:48   [active][faulty]
 \_ 1:0:5:13 sdfj 130:80  [active][faulty]
 \_ 0:0:3:13 sdl  8:176   [active][faulty]
limsd_arch (3600508b400106fcc0000700027b60000) dm-9 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:10 sdae 65:224  [active][faulty]
 \_ 0:0:6:10 sdbw 68:160  [active][faulty]
 \_ 1:0:3:10 sddo 71:96   [active][ready] 
 \_ 1:0:4:10 sdek 128:192 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:10 sdba 67:64   [active][faulty]
 \_ 1:0:2:10 sdcs 70:0    [active][faulty]
 \_ 1:0:5:10 sdfg 130:32  [active][faulty]
 \_ 0:0:3:10 sdi  8:128   [active][faulty]
mpath33 (3600508b400106fcd0000700012030000) dm-55 HP,HSV210
[size=20G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=0][active]
 \_ 0:0:4:74 sdgl 132:16  [active][faulty]
 \_ 0:0:6:74 sdgn 132:48  [active][faulty]
 \_ 1:0:3:74 sdgp 132:80  [active][faulty]
 \_ 1:0:4:74 sdgq 132:96  [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 1:0:2:74 sdgo 132:64  [active][faulty]
 \_ 0:0:3:74 sdgk 132:0   [active][faulty]
 \_ 0:0:5:74 sdgm 132:32  [active][faulty]
 \_ 1:0:5:74 sdgr 132:112 [active][faulty]
raw2 (3600508b400106fcc00007000279f0000) dm-44 HP,HSV210
[size=4.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=100][active]
 \_ 0:0:6:4  sdbr 68:80   [active][ready] 
 \_ 1:0:3:4  sddj 71:16   [active][faulty]
 \_ 1:0:4:4  sdef 128:112 [active][faulty]
 \_ 0:0:4:4  sdz  65:144  [active][ready] 
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:4  sdav 66:240  [active][faulty]
 \_ 1:0:2:4  sdcn 69:176  [active][faulty]
 \_ 0:0:3:4  sdd  8:48    [active][faulty]
 \_ 1:0:5:4  sdfb 129:208 [active][faulty]
raw1 (3600508b400106fcc0000700027940000) dm-42 HP,HSV210
[size=4.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=100][active]
 \_ 0:0:6:3  sdbq 68:64   [active][ready] 
 \_ 1:0:3:3  sddi 71:0    [active][faulty]
 \_ 1:0:4:3  sdee 128:96  [active][faulty]
 \_ 0:0:4:3  sdy  65:128  [active][ready] 
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:3  sdau 66:224  [active][faulty]
 \_ 1:0:2:3  sdcm 69:160  [active][faulty]
 \_ 0:0:3:3  sdc  8:32    [active][faulty]
 \_ 1:0:5:3  sdfa 129:192 [active][faulty]
cret (3600508b400106fcc0000700027bd0000) dm-11 HP,HSV210
[size=10G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:11 sdaf 65:240  [active][faulty]
 \_ 0:0:6:11 sdbx 68:176  [active][ready] 
 \_ 1:0:3:11 sddp 71:112  [active][faulty]
 \_ 1:0:4:11 sdel 128:208 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:11 sdbb 67:80   [active][faulty]
 \_ 1:0:2:11 sdct 70:16   [active][faulty]
 \_ 1:0:5:11 sdfh 130:48  [active][faulty]
 \_ 0:0:3:11 sdj  8:144   [active][faulty]
case_arch (3600508b400106fcc0000700027ca0000) dm-16 HP,HSV210
[size=5.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:14 sdai 66:32   [active][ready] 
 \_ 0:0:6:14 sdca 68:224  [active][faulty]
 \_ 1:0:3:14 sdds 71:160  [active][faulty]
 \_ 1:0:4:14 sdeo 129:0   [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:14 sdbe 67:128  [active][faulty]
 \_ 1:0:2:14 sdcw 70:64   [active][faulty]
 \_ 1:0:5:14 sdfk 130:96  [active][faulty]
 \_ 0:0:3:14 sdm  8:192   [active][faulty]
limst_arch (3600508b400106fcd0000700006920000) dm-26 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:22 sdan 66:112  [active][faulty]
 \_ 0:0:6:22 sdcf 69:48   [active][ready] 
 \_ 1:0:3:22 sddx 71:240  [active][faulty]
 \_ 1:0:4:22 sdet 129:80  [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:22 sdbj 67:208  [active][faulty]
 \_ 1:0:2:22 sddb 70:144  [active][faulty]
 \_ 1:0:5:22 sdfp 130:176 [active][faulty]
 \_ 0:0:3:22 sdr  65:16   [active][faulty]
orabackup (3600508b400106fcd000070000a560000) dm-19 HP,HSV210
[size=150G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=0][active]
 \_ 0:0:5:15 sdbf 67:144  [active][faulty]
 \_ 1:0:2:15 sdcx 70:80   [active][faulty]
 \_ 1:0:5:15 sdfl 130:112 [active][faulty]
 \_ 0:0:3:15 sdn  8:208   [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:4:15 sdaj 66:48   [active][faulty]
 \_ 0:0:6:15 sdcb 68:240  [active][faulty]
 \_ 1:0:3:15 sddt 71:176  [active][faulty]
 \_ 1:0:4:15 sdep 129:16  [active][faulty]
oracle_bin (3600508b400106fcc0000700027810000) dm-36 HP,HSV210
[size=50G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=100][active]
 \_ 0:0:6:1  sdbo 68:32   [active][faulty]
 \_ 1:0:3:1  sddg 70:224  [active][faulty]
 \_ 1:0:4:1  sdec 128:64  [active][ready] 
 \_ 0:0:4:1  sdw  65:96   [active][ready] 
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:1  sdas 66:192  [active][faulty]
 \_ 0:0:3:1  sda  8:0     [active][faulty]
 \_ 1:0:2:1  sdck 69:128  [active][faulty]
 \_ 1:0:5:1  sdey 129:160 [active][faulty]
ph1t (3600508b400106fcd0000700006830000) dm-21 HP,HSV210
[size=150G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:19 sdak 66:64   [active][faulty]
 \_ 0:0:6:19 sdcc 69:0    [active][faulty]
 \_ 1:0:3:19 sddu 71:192  [active][faulty]
 \_ 1:0:4:19 sdeq 129:32  [active][ready] 
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:19 sdbg 67:160  [active][faulty]
 \_ 1:0:2:19 sdcy 70:96   [active][faulty]
 \_ 1:0:5:19 sdfm 130:128 [active][faulty]
 \_ 0:0:3:19 sdo  8:224   [active][faulty]
cred (3600508b400106fcd0000700011ee0000) dm-51 HP,HSV210
[size=20G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=100][active]
 \_ 1:0:3:16 sdge 131:160 [active][faulty]
 \_ 0:0:4:16 sdfw 131:32  [active][ready] 
 \_ 0:0:6:16 sdga 131:96  [active][ready] 
 \_ 1:0:4:16 sdgg 131:192 [active][faulty]
\_ round-robin 0 [prio=30][enabled]
 \_ 0:0:3:16 sdfu 131:0   [active][ready] 
 \_ 0:0:5:16 sdfy 131:64  [active][ready] 
 \_ 1:0:2:16 sdgc 131:128 [active][ready] 
 \_ 1:0:5:16 sdgi 131:224 [active][faulty]
oracle_crs (3600508b400106fcc00007000278b0000) dm-39 HP,HSV210
[size=50G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:6:2  sdbp 68:48   [active][faulty]
 \_ 1:0:3:2  sddh 70:240  [active][faulty]
 \_ 1:0:4:2  sded 128:80  [active][ready] 
 \_ 0:0:4:2  sdx  65:112  [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:2  sdat 66:208  [active][faulty]
 \_ 0:0:3:2  sdb  8:16    [active][faulty]
 \_ 1:0:2:2  sdcl 69:144  [active][faulty]
 \_ 1:0:5:2  sdez 129:176 [active][faulty]
limst (3600508b400106fcd00007000068d0000) dm-24 HP,HSV210
[size=400G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:5:21 sdbi 67:192  [active][faulty]
 \_ 1:0:2:21 sdda 70:128  [active][ready] 
 \_ 1:0:5:21 sdfo 130:160 [active][faulty]
 \_ 0:0:3:21 sdq  65:0    [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:4:21 sdam 66:96   [active][faulty]
 \_ 0:0:6:21 sdce 69:32   [active][faulty]
 \_ 1:0:3:21 sddw 71:224  [active][faulty]
 \_ 1:0:4:21 sdes 129:64  [active][faulty]
ph1d (3600508b400106fcc0000700027a50000) dm-5 HP,HSV210
[size=90G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:7  sdab 65:176  [active][faulty]
 \_ 0:0:6:7  sdbt 68:112  [active][faulty]
 \_ 1:0:3:7  sddl 71:48   [active][ready] 
 \_ 1:0:4:7  sdeh 128:144 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:7  sdax 67:16   [active][faulty]
 \_ 1:0:2:7  sdcp 69:208  [active][faulty]
 \_ 1:0:5:7  sdfd 129:240 [active][faulty]
 \_ 0:0:3:7  sdf  8:80    [active][faulty]
ph1d_arch (3600508b400106fcc0000700027a80000) dm-6 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=50][active]
 \_ 0:0:4:8  sdac 65:192  [active][ready] 
 \_ 0:0:6:8  sdbu 68:128  [active][faulty]
 \_ 1:0:3:8  sddm 71:64   [active][faulty]
 \_ 1:0:4:8  sdei 128:160 [active][faulty]
\_ round-robin 0 [prio=0][enabled]
 \_ 0:0:5:8  sday 67:32   [active][faulty]
 \_ 1:0:2:8  sdcq 69:224  [active][faulty]
 \_ 1:0:5:8  sdfe 130:0   [active][faulty]
 \_ 0:0:3:8  sdg  8:96    [active][faulty]
tunefs.ocfs2 1.2.7
Changing volume uuid from 9ae66bce-bb02-4ee6-a28a-06db530a1933 to
59cd99d4-1f78-4e34-aeae-f13cc7deb721
Updating on-disk superblock by force.
DANGER: YOU MUST BE ABSOLUTELY SURE THAT NO OTHER NODE IS USING THIS
FILESYSTEM BEFORE CONTINUING.
Proceed (y/N): Changed volume uuid
Wrote Superblock
Changing label of /dev/mapper/mpath33p1 to ss_cred-
tunefs.ocfs2 1.2.7
tunefs.ocfs2: Node slot 0's journal is dirty. Run fsck.ocfs2 to replay
all dirty journals. Fscking /dev/mapper/mpath33p1
Checking OCFS2 filesystem in /dev/mapper/mpath33p1:
  label:              creq
  uuid:               59 cd 99 d4 1f 78 4e 34 ae ae f1 3c c7 de b7 21 
  number of blocks:   5241198
  bytes per block:    4096
  number of clusters: 5241198
  bytes per cluster:  4096
  max slots:          4

/dev/mapper/mpath33p1 is clean.  It will be checked after 20 additional
mounts.
Mounting /dev/mapper/mpath33p1 as /orasnapbackup/cred/bkup

Multipath output after LUN is mounted...
sdgk: checker msg is "tur checker reports path is down"
sdgm: checker msg is "tur checker reports path is down"
sdgo: checker msg is "tur checker reports path is down"
sdgr: checker msg is "tur checker reports path is down"
cred_arch (3600508b400106fcd0000700011f30000) dm-52 HP,HSV210
[size=5.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 1:0:4:17 sdgh 131:208 [active][ready] 
 \_ 0:0:4:17 sdfx 131:48  [active][ready] 
 \_ 0:0:6:17 sdgb 131:112 [active][ready] 
 \_ 1:0:3:17 sdgf 131:176 [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:3:17 sdfv 131:16  [active][ready] 
 \_ 0:0:5:17 sdfz 131:80  [active][ready] 
 \_ 1:0:2:17 sdgd 131:144 [active][ready] 
 \_ 1:0:5:17 sdgj 131:240 [active][ready] 
mpath19 (3600508b400106fcc000070002acb0000) dm-31 HP,HSV210
[size=10G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:71 sdap 66:144  [active][ready] 
 \_ 0:0:6:71 sdch 69:80   [active][ready] 
 \_ 1:0:3:71 sddz 128:16  [active][ready] 
 \_ 1:0:4:71 sdev 129:112 [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:71 sdbl 67:240  [active][ready] 
 \_ 1:0:2:71 sddd 70:176  [active][ready] 
 \_ 1:0:5:71 sdfr 130:208 [active][ready] 
 \_ 0:0:3:71 sdt  65:48   [active][ready] 
mpath21 (3600508b400106fcc000070002ac30000) dm-35 HP,HSV210
[size=90G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:73 sdar 66:176  [active][ready] 
 \_ 0:0:6:73 sdcj 69:112  [active][ready] 
 \_ 1:0:3:73 sdeb 128:48  [active][ready] 
 \_ 1:0:4:73 sdex 129:144 [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:73 sdbn 68:16   [active][ready] 
 \_ 1:0:2:73 sddf 70:208  [active][ready] 
 \_ 1:0:5:73 sdft 130:240 [active][ready] 
 \_ 0:0:3:73 sdv  65:80   [active][ready] 
limsd (3600508b400106fcc0000700027b30000) dm-7 HP,HSV210
[size=80G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:9  sdad 65:208  [active][ready] 
 \_ 0:0:6:9  sdbv 68:144  [active][ready] 
 \_ 1:0:3:9  sddn 71:80   [active][ready] 
 \_ 1:0:4:9  sdej 128:176 [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:9  sdaz 67:48   [active][ready] 
 \_ 1:0:2:9  sdcr 69:240  [active][ready] 
 \_ 1:0:5:9  sdff 130:16  [active][ready] 
 \_ 0:0:3:9  sdh  8:112   [active][ready] 
ph1t_arch (3600508b400106fcd0000700006880000) dm-23 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:20 sdal 66:80   [active][ready] 
 \_ 0:0:6:20 sdcd 69:16   [active][ready] 
 \_ 1:0:3:20 sddv 71:208  [active][ready] 
 \_ 1:0:4:20 sder 129:48  [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:20 sdbh 67:176  [active][ready] 
 \_ 1:0:2:20 sdcz 70:112  [active][ready] 
 \_ 1:0:5:20 sdfn 130:144 [active][ready] 
 \_ 0:0:3:20 sdp  8:240   [active][ready] 
mpath18 (3600508b400106fcc000070002acf0000) dm-30 HP,HSV210
[size=30G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:70 sdao 66:128  [active][ready] 
 \_ 0:0:6:70 sdcg 69:64   [active][ready] 
 \_ 1:0:3:70 sddy 128:0   [active][ready] 
 \_ 1:0:4:70 sdeu 129:96  [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:70 sdbk 67:224  [active][ready] 
 \_ 1:0:2:70 sddc 70:160  [active][ready] 
 \_ 1:0:5:70 sdfq 130:192 [active][ready] 
 \_ 0:0:3:70 sds  65:32   [active][ready] 
mpath20 (3600508b400106fcc000070002ac70000) dm-33 HP,HSV210
[size=80G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:72 sdaq 66:160  [active][ready] 
 \_ 0:0:6:72 sdci 69:96   [active][ready] 
 \_ 1:0:3:72 sdea 128:32  [active][ready] 
 \_ 1:0:4:72 sdew 129:128 [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:72 sdbm 68:0    [active][ready] 
 \_ 1:0:2:72 sdde 70:192  [active][ready] 
 \_ 1:0:5:72 sdfs 130:224 [active][ready] 
 \_ 0:0:3:72 sdu  65:64   [active][ready] 
cret_arch (3600508b400106fcc0000700027c20000) dm-12 HP,HSV210
[size=5.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:12 sdag 66:0    [active][ready] 
 \_ 0:0:6:12 sdby 68:192  [active][ready] 
 \_ 1:0:3:12 sddq 71:128  [active][ready] 
 \_ 1:0:4:12 sdem 128:224 [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:12 sdbc 67:96   [active][ready] 
 \_ 1:0:2:12 sdcu 70:32   [active][ready] 
 \_ 1:0:5:12 sdfi 130:64  [active][ready] 
 \_ 0:0:3:12 sdk  8:160   [active][ready] 
raw3 (3600508b400106fcc0000700027a20000) dm-4 HP,HSV210
[size=4.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:5  sdaa 65:160  [active][ready] 
 \_ 0:0:6:5  sdbs 68:96   [active][ready] 
 \_ 1:0:3:5  sddk 71:32   [active][ready] 
 \_ 1:0:4:5  sdeg 128:128 [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:5  sdaw 67:0    [active][ready] 
 \_ 1:0:2:5  sdco 69:192  [active][ready] 
 \_ 0:0:3:5  sde  8:64    [active][ready] 
 \_ 1:0:5:5  sdfc 129:224 [active][ready] 
case (3600508b400106fcc0000700027c50000) dm-14 HP,HSV210
[size=30G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:13 sdah 66:16   [active][ready] 
 \_ 0:0:6:13 sdbz 68:208  [active][ready] 
 \_ 1:0:3:13 sddr 71:144  [active][ready] 
 \_ 1:0:4:13 sden 128:240 [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:13 sdbd 67:112  [active][ready] 
 \_ 1:0:2:13 sdcv 70:48   [active][ready] 
 \_ 1:0:5:13 sdfj 130:80  [active][ready] 
 \_ 0:0:3:13 sdl  8:176   [active][ready] 
limsd_arch (3600508b400106fcc0000700027b60000) dm-9 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:10 sdae 65:224  [active][ready] 
 \_ 0:0:6:10 sdbw 68:160  [active][ready] 
 \_ 1:0:3:10 sddo 71:96   [active][ready] 
 \_ 1:0:4:10 sdek 128:192 [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:10 sdba 67:64   [active][ready] 
 \_ 1:0:2:10 sdcs 70:0    [active][ready] 
 \_ 1:0:5:10 sdfg 130:32  [active][ready] 
 \_ 0:0:3:10 sdi  8:128   [active][ready] 
mpath33 (3600508b400106fcd0000700012030000) dm-55 HP,HSV210
[size=20G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:74 sdgl 132:16  [active][ready] 
 \_ 0:0:6:74 sdgn 132:48  [active][ready] 
 \_ 1:0:3:74 sdgp 132:80  [active][ready] 
 \_ 1:0:4:74 sdgq 132:96  [active][ready] 
\_ round-robin 0 [prio=0][enabled]
 \_ 1:0:2:74 sdgo 132:64  [active][faulty]
 \_ 0:0:3:74 sdgk 132:0   [active][faulty]
 \_ 0:0:5:74 sdgm 132:32  [active][faulty]
 \_ 1:0:5:74 sdgr 132:112 [active][faulty]
raw2 (3600508b400106fcc00007000279f0000) dm-44 HP,HSV210
[size=4.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:6:4  sdbr 68:80   [active][ready] 
 \_ 1:0:3:4  sddj 71:16   [active][ready] 
 \_ 1:0:4:4  sdef 128:112 [active][ready] 
 \_ 0:0:4:4  sdz  65:144  [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:4  sdav 66:240  [active][ready] 
 \_ 1:0:2:4  sdcn 69:176  [active][ready] 
 \_ 0:0:3:4  sdd  8:48    [active][ready] 
 \_ 1:0:5:4  sdfb 129:208 [active][ready] 
raw1 (3600508b400106fcc0000700027940000) dm-42 HP,HSV210
[size=4.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:6:3  sdbq 68:64   [active][ready] 
 \_ 1:0:3:3  sddi 71:0    [active][ready] 
 \_ 1:0:4:3  sdee 128:96  [active][ready] 
 \_ 0:0:4:3  sdy  65:128  [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:3  sdau 66:224  [active][ready] 
 \_ 1:0:2:3  sdcm 69:160  [active][ready] 
 \_ 0:0:3:3  sdc  8:32    [active][ready] 
 \_ 1:0:5:3  sdfa 129:192 [active][ready] 
cret (3600508b400106fcc0000700027bd0000) dm-11 HP,HSV210
[size=10G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:11 sdaf 65:240  [active][ready] 
 \_ 0:0:6:11 sdbx 68:176  [active][ready] 
 \_ 1:0:3:11 sddp 71:112  [active][ready] 
 \_ 1:0:4:11 sdel 128:208 [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:11 sdbb 67:80   [active][ready] 
 \_ 1:0:2:11 sdct 70:16   [active][ready] 
 \_ 1:0:5:11 sdfh 130:48  [active][ready] 
 \_ 0:0:3:11 sdj  8:144   [active][ready] 
case_arch (3600508b400106fcc0000700027ca0000) dm-16 HP,HSV210
[size=5.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:14 sdai 66:32   [active][ready] 
 \_ 0:0:6:14 sdca 68:224  [active][ready] 
 \_ 1:0:3:14 sdds 71:160  [active][ready] 
 \_ 1:0:4:14 sdeo 129:0   [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:14 sdbe 67:128  [active][ready] 
 \_ 1:0:2:14 sdcw 70:64   [active][ready] 
 \_ 1:0:5:14 sdfk 130:96  [active][ready] 
 \_ 0:0:3:14 sdm  8:192   [active][ready] 
limst_arch (3600508b400106fcd0000700006920000) dm-26 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:22 sdan 66:112  [active][ready] 
 \_ 0:0:6:22 sdcf 69:48   [active][ready] 
 \_ 1:0:3:22 sddx 71:240  [active][ready] 
 \_ 1:0:4:22 sdet 129:80  [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:22 sdbj 67:208  [active][ready] 
 \_ 1:0:2:22 sddb 70:144  [active][ready] 
 \_ 1:0:5:22 sdfp 130:176 [active][ready] 
 \_ 0:0:3:22 sdr  65:16   [active][ready] 
orabackup (3600508b400106fcd000070000a560000) dm-19 HP,HSV210
[size=150G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:5:15 sdbf 67:144  [active][ready] 
 \_ 1:0:2:15 sdcx 70:80   [active][ready] 
 \_ 1:0:5:15 sdfl 130:112 [active][ready] 
 \_ 0:0:3:15 sdn  8:208   [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:4:15 sdaj 66:48   [active][ready] 
 \_ 0:0:6:15 sdcb 68:240  [active][ready] 
 \_ 1:0:3:15 sddt 71:176  [active][ready] 
 \_ 1:0:4:15 sdep 129:16  [active][ready] 
oracle_bin (3600508b400106fcc0000700027810000) dm-36 HP,HSV210
[size=50G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:6:1  sdbo 68:32   [active][ready] 
 \_ 1:0:3:1  sddg 70:224  [active][ready] 
 \_ 1:0:4:1  sdec 128:64  [active][ready] 
 \_ 0:0:4:1  sdw  65:96   [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:1  sdas 66:192  [active][ready] 
 \_ 0:0:3:1  sda  8:0     [active][ready] 
 \_ 1:0:2:1  sdck 69:128  [active][ready] 
 \_ 1:0:5:1  sdey 129:160 [active][ready] 
ph1t (3600508b400106fcd0000700006830000) dm-21 HP,HSV210
[size=150G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:19 sdak 66:64   [active][ready] 
 \_ 0:0:6:19 sdcc 69:0    [active][ready] 
 \_ 1:0:3:19 sddu 71:192  [active][ready] 
 \_ 1:0:4:19 sdeq 129:32  [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:19 sdbg 67:160  [active][ready] 
 \_ 1:0:2:19 sdcy 70:96   [active][ready] 
 \_ 1:0:5:19 sdfm 130:128 [active][ready] 
 \_ 0:0:3:19 sdo  8:224   [active][ready] 
cred (3600508b400106fcd0000700011ee0000) dm-51 HP,HSV210
[size=20G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 1:0:3:16 sdge 131:160 [active][ready] 
 \_ 0:0:4:16 sdfw 131:32  [active][ready] 
 \_ 0:0:6:16 sdga 131:96  [active][ready] 
 \_ 1:0:4:16 sdgg 131:192 [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:3:16 sdfu 131:0   [active][ready] 
 \_ 0:0:5:16 sdfy 131:64  [active][ready] 
 \_ 1:0:2:16 sdgc 131:128 [active][ready] 
 \_ 1:0:5:16 sdgi 131:224 [active][ready] 
oracle_crs (3600508b400106fcc00007000278b0000) dm-39 HP,HSV210
[size=50G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:6:2  sdbp 68:48   [active][ready] 
 \_ 1:0:3:2  sddh 70:240  [active][ready] 
 \_ 1:0:4:2  sded 128:80  [active][ready] 
 \_ 0:0:4:2  sdx  65:112  [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:2  sdat 66:208  [active][ready] 
 \_ 0:0:3:2  sdb  8:16    [active][ready] 
 \_ 1:0:2:2  sdcl 69:144  [active][ready] 
 \_ 1:0:5:2  sdez 129:176 [active][ready] 
limst (3600508b400106fcd00007000068d0000) dm-24 HP,HSV210
[size=400G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:5:21 sdbi 67:192  [active][ready] 
 \_ 1:0:2:21 sdda 70:128  [active][ready] 
 \_ 1:0:5:21 sdfo 130:160 [active][ready] 
 \_ 0:0:3:21 sdq  65:0    [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:4:21 sdam 66:96   [active][ready] 
 \_ 0:0:6:21 sdce 69:32   [active][ready] 
 \_ 1:0:3:21 sddw 71:224  [active][ready] 
 \_ 1:0:4:21 sdes 129:64  [active][ready] 
ph1d (3600508b400106fcc0000700027a50000) dm-5 HP,HSV210
[size=90G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:7  sdab 65:176  [active][ready] 
 \_ 0:0:6:7  sdbt 68:112  [active][ready] 
 \_ 1:0:3:7  sddl 71:48   [active][ready] 
 \_ 1:0:4:7  sdeh 128:144 [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:7  sdax 67:16   [active][ready] 
 \_ 1:0:2:7  sdcp 69:208  [active][ready] 
 \_ 1:0:5:7  sdfd 129:240 [active][ready] 
 \_ 0:0:3:7  sdf  8:80    [active][ready] 
ph1d_arch (3600508b400106fcc0000700027a80000) dm-6 HP,HSV210
[size=100G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=200][active]
 \_ 0:0:4:8  sdac 65:192  [active][ready] 
 \_ 0:0:6:8  sdbu 68:128  [active][ready] 
 \_ 1:0:3:8  sddm 71:64   [active][ready] 
 \_ 1:0:4:8  sdei 128:160 [active][ready] 
\_ round-robin 0 [prio=40][enabled]
 \_ 0:0:5:8  sday 67:32   [active][ready] 
 \_ 1:0:2:8  sdcq 69:224  [active][ready] 
 \_ 1:0:5:8  sdfe 130:0   [active][ready] 
 \_ 0:0:3:8  sdg  8:96    [active][ready] 



> -----Original Message-----
> From: dm-devel-bounces@redhat.com 
> [mailto:dm-devel-bounces@redhat.com] On Behalf Of Konrad Rzeszutek
> Sent: Wednesday, November 26, 2008 11:43 AM
> To: device-mapper development
> Subject: Re: [dm-devel] RE: Temporarily squelching multipathd errors
> 
> On Fri, Nov 21, 2008 at 01:54:01PM -0600, Daniel Keisling wrote:
> > I am still getting multipath errors when unpresenting and presenting
> > LUNs.  I've traced it down to getting path failures 
> everytime I either
> > remove or add a LUN to the system.  The strange thing is 
> that I get path
> > errors for maps that aren't related to the LUNs I am 
> deleting or adding.
> > In this case, I am deleting the LUN with the map 'mpath18,' 
> but other
> > maps complain whenever the LUN is deleted:
> > 
> > Nov 21 13:47:05 ausracdbd01 multipathd: checker failed path 
> 67:208 in
> > map orabackup_hs
> > Nov 21 13:47:05 ausracdbd01 kernel: device-mapper: 
> multipath: Failing
> > path 67:208.
> > Nov 21 13:47:08 ausracdbd01 multipathd: checker failed path 
> 70:160 in
> > map mpath18
> > Nov 21 13:47:08 ausracdbd01 kernel: device-mapper: 
> multipath: Failing
> > path 70:160.
> > Nov 21 13:47:09 ausracdbd01 multipathd: checker failed path 
> 69:0 in map
> > orabackup_hs
> > Nov 21 13:47:09 ausracdbd01 kernel: device-mapper: 
> multipath: Failing
> > path 69:0.
> > Nov 21 13:47:10 ausracdbd01 multipathd: checker failed path 
> 65:192 in
> > map ph1d
> > Nov 21 13:47:10 ausracdbd01 kernel: device-mapper: 
> multipath: Failing
> > path 65:192.
> > Nov 21 13:47:10 ausracdbd01 multipathd: checker failed path 
> 65:224 in
> > map limsd
> > Nov 21 13:47:10 ausracdbd01 kernel: device-mapper: 
> multipath: Failing
> > path 65:224.
> > Nov 21 13:47:10 ausracdbd01 multipathd: checker failed path 
> 65:240 in
> > map limsd_arch
> > 
> 
> Can you attach the 'multipath -ll' output? Run the program before
> you delete/add the LUNs and after, please.
> 
> How do you delete/add the LUNs? Are you re-using the LUN 
> number, or are you
> actually deleting a LUN, deleting the block device as well, and then
> when adding (with a new LUN number higher than the deleted 
> one), rescanning 
> the SCSI host channel to get the new block device for the LUN?
> 
> --
> dm-devel mailing list
> dm-devel@redhat.com
> https://www.redhat.com/mailman/listinfo/dm-devel
> 
> 

______________________________________________________________________
This email transmission and any documents, files or previous email
messages attached to it may contain information that is confidential or
legally privileged. If you are not the intended recipient or a person
responsible for delivering this transmission to the intended recipient,
you are hereby notified that you must not read this transmission and
that any disclosure, copying, printing, distribution or use of this
transmission is strictly prohibited. If you have received this transmission
in error, please immediately notify the sender by telephone or return email
and delete the original transmission and its attachments without reading
or saving in any manner.

Re: RE: Temporarily squelching multipathd errors

[Konrad Rzeszutek]

On Fri, Jan 16, 2009 at 02:29:40PM -0600, Daniel Keisling wrote:
> Right now I'm deleting the LUN, immediately creating a new LUN, and
> presenting it back to the system with the same SCSI ID.  Since it's a
> snapshot, the LUN geometry is always the same.  I've tried unpresenting
> the LUN, deleting the SCSI devices, recreating/presenting the LUN, and
> then doing a SCSI rescan, but the multipath errors are always there.  
> 
> Here's the multipath listings.  I am only deleting/presenting the
> "mpath33" map, but you can see the multipath errors and the other paths

How are you 'deleting' the mpath33 map? Are you using 'dmsetup remove mpath33'
?

> having a fault:
> 
> Unmounting /dev/mapper/mpath33p1...
> Multipath listing before LUN is deleted...
> cred_arch (3600508b400106fcd0000700011f30000) dm-52 HP,HSV210
> [size=5.0G][features=1 queue_if_no_path][hwhandler=0]

..snip ..
> 
> 
> Multipath listing after LUN is deleted and before LUN is added...

I am not seeing how you are deleting the SCSI device of the node.
Are you doing 'echo 1 > /sys/block/sdab/device/delete' for all
of those block-devices that match the 'deleted LUN'?


.. snip ..
> 
> 
> Multipath output after LUN is added...

How are you doing a SCSI rescan?

RE: RE: Temporarily squelching multipathd errors

[Daniel Keisling]

> -----Original Message-----
> From: Konrad Rzeszutek [mailto:konrad@virtualiron.com] 
> Sent: Friday, January 16, 2009 3:29 PM
> To: Daniel Keisling
> Cc: device-mapper development
> Subject: Re: [dm-devel] RE: Temporarily squelching multipathd errors
> 
> On Fri, Jan 16, 2009 at 02:29:40PM -0600, Daniel Keisling wrote:
> > Right now I'm deleting the LUN, immediately creating a new LUN, and
> 
> > presenting it back to the system with the same SCSI ID.  
> Since it's a
> 
> > snapshot, the LUN geometry is always the same.  I've tried 
> unpresenting
> 
> > the LUN, deleting the SCSI devices, recreating/presenting 
> the LUN, and
> 
> > then doing a SCSI rescan, but the multipath errors are 
> always there.  
> 
> > 
> 
> > Here's the multipath listings.  I am only deleting/presenting the
> 
> > "mpath33" map, but you can see the multipath errors and the 
> other paths
> 
> 
> How are you 'deleting' the mpath33 map? Are you using 
> 'dmsetup remove mpath33'
> ?


No, I am telling the storage unit to delete the LUN.  In this test, I:

A) Unmount the filesystem
B) Tell the storage system to delete the LUN (which unpresents it,
obviously)
C) Tell the storage system to make a new LUN using the same WWID and
SCSI ID as before
D) Present the LUN

Since all this takes around 20 seconds, I can immediately mount the LUN
again on the server.

> 
> > having a fault:
> 
> > 
> 
> > Unmounting /dev/mapper/mpath33p1...
> 
> > Multipath listing before LUN is deleted...
> 
> > cred_arch (3600508b400106fcd0000700011f30000) dm-52 HP,HSV210
> 
> > [size=5.0G][features=1 queue_if_no_path][hwhandler=0]
> 
> 
> ..snip ..
> > 
> 
> > 
> 
> > Multipath listing after LUN is deleted and before LUN is added...
> 
> 
> I am not seeing how you are deleting the SCSI device of the node.
> Are you doing 'echo 1 > /sys/block/sdab/device/delete' for all
> of those block-devices that match the 'deleted LUN'?
> 


No, I am not.  I have before, but it didn't seem to help.



> 
> .. snip ..
> > 
> 
> > 
> 
> > Multipath output after LUN is added...
> 
> 
> How are you doing a SCSI rescan?
> 
> 

I'm not in this test.  Since all this takes around 20 seconds, I can
immediately mount the LUN again on the server with any SCSI devices
permanently disappearing.

Would you like me to:

A) Umount the filesystem
B) Perform a 'dmsetup remove mpath33'
C) Delete all SCSI devices via /sys/block/$device/delete
D) Tell the storage unit to unpresent and delete the LUN
E) Optionally do a SCSI rescan to clear everything out
F) Tell the storage unit to create the LUN with the same WWID and SCSI
ID
G) Perform a SCSI rescan
H) Do a multipath -v3 to get the maps back (?)
I) Fsck and mount the filesystem?

I believe I get the same results as what I pasted, but will prove it if
need be.

BTW, I do a SCSI rescan with the HP Fibreutils package (hp_rescan -a),
which basically does a "echo "- - -" >
/sys/class/scsi_host/${INST}/scan" and removes devices with "echo "scsi
remove-single-device $INST 0 $j $k" > /proc/scsi/scsi"

Thanks,

Daniel

______________________________________________________________________
This email transmission and any documents, files or previous email
messages attached to it may contain information that is confidential or
legally privileged. If you are not the intended recipient or a person
responsible for delivering this transmission to the intended recipient,
you are hereby notified that you must not read this transmission and
that any disclosure, copying, printing, distribution or use of this
transmission is strictly prohibited. If you have received this transmission
in error, please immediately notify the sender by telephone or return email
and delete the original transmission and its attachments without reading
or saving in any manner.

Re: RE: Temporarily squelching multipathd errors

[Konrad Rzeszutek]

> 
> I'm not in this test.  Since all this takes around 20 seconds, I can
> immediately mount the LUN again on the server with any SCSI devices
> permanently disappearing.
> 
> Would you like me to:
> 
> A) Umount the filesystem
> B) Perform a 'dmsetup remove mpath33'
> C) Delete all SCSI devices via /sys/block/$device/delete
> D) Tell the storage unit to unpresent and delete the LUN
> E) Optionally do a SCSI rescan to clear everything out
> F) Tell the storage unit to create the LUN with the same WWID and SCSI
> ID
> G) Perform a SCSI rescan
> H) Do a multipath -v3 to get the maps back (?)
> I) Fsck and mount the filesystem?
> 
> I believe I get the same results as what I pasted, but will prove it if
> need be.

Please do. Step B might be unnecessary as multipathd will figure out that
devices are gone (by step C) and start removing the block devices from the
map.

> 
> BTW, I do a SCSI rescan with the HP Fibreutils package (hp_rescan -a),
> which basically does a "echo "- - -" >
> /sys/class/scsi_host/${INST}/scan" and removes devices with "echo "scsi
> remove-single-device $INST 0 $j $k" > /proc/scsi/scsi"

You only need to do the first step: echo "- - -"  > /sys/class/scsi/host/hostX/scan

> 
> Thanks,
> 
> Daniel
> 
> ______________________________________________________________________
> This email transmission and any documents, files or previous email
> messages attached to it may contain information that is confidential or
> legally privileged. If you are not the intended recipient or a person
> responsible for delivering this transmission to the intended recipient,
> you are hereby notified that you must not read this transmission and
> that any disclosure, copying, printing, distribution or use of this
> transmission is strictly prohibited. If you have received this transmission
> in error, please immediately notify the sender by telephone or return email
> and delete the original transmission and its attachments without reading
> or saving in any manner.
> 

Temporarily squelching multipathd errors

[Daniel Keisling]

Greetings,
 
I perform SAN-based snapshots on OCFS2 and ext3 filesystems under
dm-multipath.  Before I snapshot the filesystem, I unmount and delete
the previous night's snapshot LUNs.  Doing so causes (correctly)
multipathd to output the following errors:
 
<snip>
...
Jul 14 03:16:02 ausracdbd01 multipathd: mpath19: remaining active paths:
7
Jul 14 03:16:02 ausracdbd01 multipathd: sdci: tur checker reports path
is down
Jul 14 03:16:02 ausracdbd01 kernel: device-mapper: multipath: Failing
path 69:80.
Jul 14 03:16:02 ausracdbd01 multipathd: sdco: tur checker reports path
is down
....
</snip>
 
During this snapshot time, I would like to temporarily turn off the
verbosity of multipathd.  Is this possible?  It's mostly an annoyance
factor for me because our nightly centralized syslog scan picks up words
like 'fail' and generates a report to the system administrators (which
we then have to ignore for these messages).
 
TIA,

Daniel
 

______________________________________________________________________
This email transmission and any documents, files or previous email
messages attached to it may contain information that is confidential or
legally privileged. If you are not the intended recipient or a person
responsible for delivering this transmission to the intended recipient,
you are hereby notified that you must not read this transmission and
that any disclosure, copying, printing, distribution or use of this
transmission is strictly prohibited. If you have received this transmission
in error, please immediately notify the sender by telephone or return email
and delete the original transmission and its attachments without reading
or saving in any manner.