[PATCH 06/10] ide-atapi: add a DEV_IS_IDECD macro

[Borislav Petkov <petkovbb@googlemail.com>]

This is a short-term-use one and will be removed later - it is added to solely
improve readability.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c |   12 +++++++-----
 1 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 7045d34..e1fa52d 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -477,6 +477,9 @@ static int ide_delayed_transfer_pc(ide_drive_t *drive)
 	return WAIT_FLOPPY_CMD;
 }
 
+#define DEV_IS_IDECD(drive)	\
+		(drive->media == ide_cdrom || drive->media == ide_optical)
+
 static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 {
 	struct ide_atapi_pc *pc = drive->pc;
@@ -487,7 +490,7 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 	ide_startstop_t startstop;
 	u8 ireason;
 
-	if ((drive->media == ide_cdrom || drive->media == ide_optical) &&
+	if (DEV_IS_IDECD(drive) &&
 	    (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT)) {
 		if (drive->dma)
 			drive->waiting_for_dma = 1;
@@ -561,7 +564,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 	/* Request to transfer the entire buffer at once */
 	if (drive->media == ide_tape && scsi == 0)
 		bcount = pc->req_xfer;
-	else if (drive->media == ide_cdrom || drive->media == ide_optical)
+	else if (DEV_IS_IDECD(drive))
 		bcount = xferlen;
 	else
 		bcount = min(pc->req_xfer, 63 * 1024);
@@ -573,8 +576,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 
 	if (((pc->flags & PC_FLAG_DMA_OK) &&
 		(drive->dev_flags & IDE_DFLAG_USING_DMA)) ||
-	    ((drive->media == ide_cdrom || drive->media == ide_optical) &&
-	         drive->dma)) {
+	    (DEV_IS_IDECD(drive) && drive->dma)) {
 		if (scsi)
 			hwif->sg_mapped = 1;
 		drive->dma = !hwif->dma_ops->dma_setup(drive);
@@ -587,7 +589,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
 
 	if (scsi)
 		tf_flags = 0;
-	else if (drive->media == ide_cdrom || drive->media == ide_optical)
+	else if (DEV_IS_IDECD(drive))
 		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
 	else
 		tf_flags = IDE_TFLAG_OUT_DEVICE;
-- 
1.5.5.1