From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.arm.linux.org.uk
Cc: linux-omap@vger.kernel.org, Tony Lindgren <tony@atomide.com>
Subject: [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree
Date: Fri, 3 Oct 2008 14:56:48 +0300 [thread overview]
Message-ID: <1223035009-23866-7-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <1223035009-23866-6-git-send-email-tony@atomide.com>
Misc updates from linux-omap tree, mostly to update common
device initialization and add missing defines from linux-omap
tree. Also some changes to make room for adding 34xx in
following patches.
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 99982d3..e382b43 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -101,7 +101,7 @@ static inline void omap_init_mbox(void) { }
#if defined(CONFIG_OMAP_STI)
-#define OMAP1_STI_BASE IO_ADDRESS(0xfffea000)
+#define OMAP1_STI_BASE 0xfffea000
#define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400)
static struct resource sti_resources[] = {
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index ea55f28..1fb330e 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -21,6 +21,7 @@
/* The maximum error between a target DPLL rate and the rounded rate in Hz */
#define DEFAULT_DPLL_RATE_TOLERANCE 50000
+int omap2_clk_init(void);
int omap2_clk_enable(struct clk *clk);
void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 2ee954a..cc5c294 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -23,49 +23,37 @@
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
+#include <mach/eac.h>
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
-#define OMAP2_I2C_BASE2 0x48072000
-#define OMAP2_I2C_INT2 57
-
-static struct resource i2c_resources2[] = {
+static struct resource cam_resources[] = {
{
- .start = OMAP2_I2C_BASE2,
- .end = OMAP2_I2C_BASE2 + 0x3f,
+ .start = OMAP24XX_CAMERA_BASE,
+ .end = OMAP24XX_CAMERA_BASE + 0xfff,
.flags = IORESOURCE_MEM,
},
{
- .start = OMAP2_I2C_INT2,
+ .start = INT_24XX_CAM_IRQ,
.flags = IORESOURCE_IRQ,
- },
+ }
};
-static struct platform_device omap_i2c_device2 = {
- .name = "i2c_omap",
- .id = 2,
- .num_resources = ARRAY_SIZE(i2c_resources2),
- .resource = i2c_resources2,
+static struct platform_device omap_cam_device = {
+ .name = "omap24xxcam",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(cam_resources),
+ .resource = cam_resources,
};
-/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */
-static void omap_init_i2c(void)
+static inline void omap_init_camera(void)
{
- /* REVISIT: Second I2C not in use on H4? */
- if (machine_is_omap_h4())
- return;
-
- if (!cpu_is_omap2430()) {
- omap_cfg_reg(J15_24XX_I2C2_SCL);
- omap_cfg_reg(H19_24XX_I2C2_SDA);
- }
- (void) platform_device_register(&omap_i2c_device2);
+ platform_device_register(&omap_cam_device);
}
-
#else
-
-static void omap_init_i2c(void) {}
-
+static inline void omap_init_camera(void)
+{
+}
#endif
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
@@ -104,7 +92,9 @@ static inline void omap_init_mbox(void) { }
#if defined(CONFIG_OMAP_STI)
-#define OMAP2_STI_BASE IO_ADDRESS(0x48068000)
+#if defined(CONFIG_ARCH_OMAP2)
+
+#define OMAP2_STI_BASE 0x48068000
#define OMAP2_STI_CHANNEL_BASE 0x54000000
#define OMAP2_STI_IRQ 4
@@ -124,6 +114,25 @@ static struct resource sti_resources[] = {
.flags = IORESOURCE_IRQ,
}
};
+#elif defined(CONFIG_ARCH_OMAP3)
+
+#define OMAP3_SDTI_BASE 0x54500000
+#define OMAP3_SDTI_CHANNEL_BASE 0x54600000
+
+static struct resource sti_resources[] = {
+ {
+ .start = OMAP3_SDTI_BASE,
+ .end = OMAP3_SDTI_BASE + 0xFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3_SDTI_CHANNEL_BASE,
+ .end = OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+#endif
static struct platform_device sti_device = {
.name = "sti",
@@ -140,12 +149,14 @@ static inline void omap_init_sti(void)
static inline void omap_init_sti(void) {}
#endif
-#if defined(CONFIG_SPI_OMAP24XX)
+#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <mach/mcspi.h>
#define OMAP2_MCSPI1_BASE 0x48098000
#define OMAP2_MCSPI2_BASE 0x4809a000
+#define OMAP2_MCSPI3_BASE 0x480b8000
+#define OMAP2_MCSPI4_BASE 0x480ba000
static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
.num_cs = 4,
@@ -159,7 +170,7 @@ static struct resource omap2_mcspi1_resources[] = {
},
};
-struct platform_device omap2_mcspi1 = {
+static struct platform_device omap2_mcspi1 = {
.name = "omap2_mcspi",
.id = 1,
.num_resources = ARRAY_SIZE(omap2_mcspi1_resources),
@@ -181,7 +192,7 @@ static struct resource omap2_mcspi2_resources[] = {
},
};
-struct platform_device omap2_mcspi2 = {
+static struct platform_device omap2_mcspi2 = {
.name = "omap2_mcspi",
.id = 2,
.num_resources = ARRAY_SIZE(omap2_mcspi2_resources),
@@ -191,16 +202,162 @@ struct platform_device omap2_mcspi2 = {
},
};
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+static struct omap2_mcspi_platform_config omap2_mcspi3_config = {
+ .num_cs = 2,
+};
+
+static struct resource omap2_mcspi3_resources[] = {
+ {
+ .start = OMAP2_MCSPI3_BASE,
+ .end = OMAP2_MCSPI3_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_mcspi3 = {
+ .name = "omap2_mcspi",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(omap2_mcspi3_resources),
+ .resource = omap2_mcspi3_resources,
+ .dev = {
+ .platform_data = &omap2_mcspi3_config,
+ },
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap2_mcspi_platform_config omap2_mcspi4_config = {
+ .num_cs = 1,
+};
+
+static struct resource omap2_mcspi4_resources[] = {
+ {
+ .start = OMAP2_MCSPI4_BASE,
+ .end = OMAP2_MCSPI4_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_mcspi4 = {
+ .name = "omap2_mcspi",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(omap2_mcspi4_resources),
+ .resource = omap2_mcspi4_resources,
+ .dev = {
+ .platform_data = &omap2_mcspi4_config,
+ },
+};
+#endif
+
static void omap_init_mcspi(void)
{
platform_device_register(&omap2_mcspi1);
platform_device_register(&omap2_mcspi2);
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+ platform_device_register(&omap2_mcspi3);
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+ platform_device_register(&omap2_mcspi4);
+#endif
}
#else
static inline void omap_init_mcspi(void) {}
#endif
+#ifdef CONFIG_SND_OMAP24XX_EAC
+
+#define OMAP2_EAC_BASE 0x48090000
+
+static struct resource omap2_eac_resources[] = {
+ {
+ .start = OMAP2_EAC_BASE,
+ .end = OMAP2_EAC_BASE + 0x109,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_eac_device = {
+ .name = "omap24xx-eac",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap2_eac_resources),
+ .resource = omap2_eac_resources,
+ .dev = {
+ .platform_data = NULL,
+ },
+};
+
+void omap_init_eac(struct eac_platform_data *pdata)
+{
+ omap2_eac_device.dev.platform_data = pdata;
+ platform_device_register(&omap2_eac_device);
+}
+
+#else
+void omap_init_eac(struct eac_platform_data *pdata) {}
+#endif
+
+#ifdef CONFIG_OMAP_SHA1_MD5
+static struct resource sha1_md5_resources[] = {
+ {
+ .start = OMAP24XX_SEC_SHA1MD5_BASE,
+ .end = OMAP24XX_SEC_SHA1MD5_BASE + 0x64,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_SHA1MD5,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device sha1_md5_device = {
+ .name = "OMAP SHA1/MD5",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(sha1_md5_resources),
+ .resource = sha1_md5_resources,
+};
+
+static void omap_init_sha1_md5(void)
+{
+ platform_device_register(&sha1_md5_device);
+}
+#else
+static inline void omap_init_sha1_md5(void) { }
+#endif
+
+#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#define OMAP_HDQ_BASE 0x480B2000
+#endif
+static struct resource omap_hdq_resources[] = {
+ {
+ .start = OMAP_HDQ_BASE,
+ .end = OMAP_HDQ_BASE + 0x1C,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_HDQ_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+static struct platform_device omap_hdq_dev = {
+ .name = "omap_hdq",
+ .id = 0,
+ .dev = {
+ .platform_data = NULL,
+ },
+ .num_resources = ARRAY_SIZE(omap_hdq_resources),
+ .resource = omap_hdq_resources,
+};
+static inline void omap_hdq_init(void)
+{
+ (void) platform_device_register(&omap_hdq_dev);
+}
+#else
+static inline void omap_hdq_init(void) {}
+#endif
+
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
@@ -208,10 +365,12 @@ static int __init omap2_init_devices(void)
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
- omap_init_i2c();
+ omap_init_camera();
omap_init_mbox();
omap_init_mcspi();
+ omap_hdq_init();
omap_init_sti();
+ omap_init_sha1_md5();
return 0;
}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index ae83ed5..a8d34f6 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -23,7 +23,7 @@
#include <asm/mach-types.h>
#include <mach/gpmc.h>
-#include "memory.h"
+#include <mach/sdrc.h>
/* GPMC register offsets */
#define GPMC_REVISION 0x00
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index d67d331..faf3f68 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,8 +4,11 @@
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- * Updated map desc to add 2430 support : <x0khasim@ti.com>
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Author:
+ * Juha Yrjola <juha.yrjola@nokia.com>
+ * Syed Khasim <x0khasim@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -23,6 +26,11 @@
#include <mach/mux.h>
#include <mach/omapfb.h>
+#include <mach/sram.h>
+
+#include "memory.h"
+
+#include "clock.h"
#include <mach/powerdomain.h>
@@ -31,13 +39,6 @@
#include <mach/clockdomain.h>
#include "clockdomains.h"
-extern void omap_sram_init(void);
-extern int omap2_clk_init(void);
-extern void omap2_check_revision(void);
-extern void omap2_init_memory(void);
-extern void gpmc_init(void);
-extern void omapfb_reserve_sdram(void);
-
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 3a3b2cb..a0bdf06 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -37,11 +37,9 @@ static struct omap_irq_bank {
} __attribute__ ((aligned(4))) irq_banks[] = {
{
/* MPU INTC */
- .base_reg = IO_ADDRESS(OMAP24XX_IC_BASE),
+ .base_reg = 0,
.nr_irqs = 96,
- }, {
- /* XXX: DSP INTC */
- }
+ },
};
/* XXX: FIQ and additional INTC support (only MPU at the moment) */
@@ -118,10 +116,8 @@ void __init omap_init_irq(void)
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
struct omap_irq_bank *bank = irq_banks + i;
- /* XXX */
- if (!bank->base_reg)
- continue;
-
+ if (cpu_is_omap24xx())
+ bank->base_reg = IO_ADDRESS(OMAP24XX_IC_BASE);
omap_irq_bank_init_one(bank);
nr_irqs += bank->nr_irqs;
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
index 9a280b5..bb3db80 100644
--- a/arch/arm/mach-omap2/memory.h
+++ b/arch/arm/mach-omap2/memory.h
@@ -14,6 +14,9 @@
* published by the Free Software Foundation.
*/
+#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H
+#define ARCH_ARM_MACH_OMAP2_MEMORY_H
+
/* Memory timings */
#define M_DDR 1
#define M_LOCK_CTRL (1 << 2)
@@ -34,3 +37,7 @@ extern u32 omap2_memory_get_fast_dll_ctrl(void);
extern u32 omap2_memory_get_type(void);
u32 omap2_dll_force_needed(void);
u32 omap2_reprogram_sdrc(u32 level, u32 force);
+void __init omap2_init_memory(void);
+void __init gpmc_init(void);
+
+#endif
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index a716ecd..3ca15de 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -20,17 +20,17 @@
#include <asm/mach/map.h>
#include <mach/tc.h>
+#include <mach/control.h>
#include <mach/board.h>
#include <mach/mmc.h>
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/menelaus.h>
#include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-#include "../plat-omap/dsp/dsp_common.h"
-
static struct dsp_platform_data dsp_pdata = {
.kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list),
};
@@ -76,7 +76,7 @@ int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev)
{
static DEFINE_MUTEX(dsp_pdata_lock);
- mutex_init(&kdev->lock);
+ spin_lock_init(&kdev->lock);
mutex_lock(&dsp_pdata_lock);
list_add_tail(&kdev->entry, &dsp_pdata.kdev_list);
@@ -525,10 +525,6 @@ static inline void omap_init_rng(void) {}
*/
static int __init omap_init_devices(void)
{
-/*
- * Need to enable relevant once for 2430 SDP
- */
-#ifndef CONFIG_MACH_OMAP_2430SDP
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
@@ -538,7 +534,6 @@ static int __init omap_init_devices(void)
omap_init_uwire();
omap_init_wdt();
omap_init_rng();
-#endif
return 0;
}
arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
index cf1dc02..10d449e 100644
--- a/arch/arm/plat-omap/include/mach/board-2430sdp.h
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -30,10 +30,12 @@
#define __ASM_ARCH_OMAP_2430SDP_H
/* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START 0x08000300
+#define OMAP24XX_ETHR_START 0x08000300
#define OMAP24XX_ETHR_GPIO_IRQ 149
#define SDP2430_CS0_BASE 0x04000000
-#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ
+/* Function prototypes */
+extern void sdp2430_flash_init(void);
+extern void sdp2430_usb_init(void);
#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
index d6f2a8e..731c858 100644
--- a/arch/arm/plat-omap/include/mach/board-apollon.h
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -31,6 +31,12 @@
extern void apollon_mmc_init(void);
+static inline int apollon_plus(void)
+{
+ /* The apollon plus has IDCODE revision 5 */
+ return system_rev & 0xc0;
+}
+
/* Placeholder for APOLLON specific defines */
#define APOLLON_ETHR_GPIO_IRQ 74
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
index 1470cd3..7c3fa0f 100644
--- a/arch/arm/plat-omap/include/mach/board-h4.h
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -1,7 +1,7 @@
/*
* arch/arm/plat-omap/include/mach/board-h4.h
*
- * Hardware definitions for TI OMAP1610 H4 board.
+ * Hardware definitions for TI OMAP2420 H4 board.
*
* Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
*
@@ -29,6 +29,9 @@
#ifndef __ASM_ARCH_OMAP_H4_H
#define __ASM_ARCH_OMAP_H4_H
+/* MMC Prototypes */
+extern void h4_mmc_init(void);
+
/* Placeholder for H4 specific defines */
#define OMAP24XX_ETHR_GPIO_IRQ 92
#endif /* __ASM_ARCH_OMAP_H4_H */
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 5444564..c23c12c 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -45,6 +45,8 @@ struct omap_mmc_conf {
unsigned cover:1;
/* 4 wire signaling is optional, and is only used for SD/SDIO */
unsigned wire4:1;
+ /* use the internal clock */
+ unsigned internal_clock:1;
s16 power_pin;
s16 switch_pin;
s16 wp_pin;
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index ee378d2..dc98867 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,13 +1,10 @@
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
/*
* arch/arm/plat-omap/include/mach/control.h
*
* OMAP2/3 System Control Module definitions
*
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
*
* Written by Paul Walmsley
*
@@ -16,14 +13,23 @@
* the Free Software Foundation.
*/
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
#include <mach/io.h>
+#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#else
+#define OMAP242X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#endif /* __ASSEMBLY__ */
/*
* As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
@@ -134,6 +140,7 @@
#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc)
#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4)
/*
* REVISIT: This list of registers is not comprehensive - there are more
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 35a653c..98e9008 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -76,6 +76,8 @@ extern void omap_free_gpio(int gpio);
extern void omap_set_gpio_direction(int gpio, int is_input);
extern void omap_set_gpio_dataout(int gpio, int enable);
extern int omap_get_gpio_datain(int gpio);
+extern void omap2_gpio_prepare_for_retention(void);
+extern void omap2_gpio_resume_after_retention(void);
extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 4258e00..3c7b425 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -25,6 +25,9 @@
#define GPMC_CS_NAND_ADDRESS 0x20
#define GPMC_CS_NAND_DATA 0x24
+#define GPMC_CONFIG 0x50
+#define GPMC_STATUS 0x54
+
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index abb01e4..29c849f 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -282,8 +282,8 @@
#include "omap730.h"
#include "omap1510.h"
-#include "omap24xx.h"
#include "omap16xx.h"
+#include "omap24xx.h"
#include "omap34xx.h"
#ifndef __ASSEMBLER__
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 62aa7df..fe0b3d3 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -125,6 +125,7 @@
#define INT_UART2 (15 + IH2_BASE)
#define INT_BT_MCSI1TX (16 + IH2_BASE)
#define INT_BT_MCSI1RX (17 + IH2_BASE)
+#define INT_SOSSI_MATCH (19 + IH2_BASE)
#define INT_USB_W2FC (20 + IH2_BASE)
#define INT_1WIRE (21 + IH2_BASE)
#define INT_OS_TIMER (22 + IH2_BASE)
@@ -176,6 +177,7 @@
#define INT_1610_DMA_CH14 (61 + IH2_BASE)
#define INT_1610_DMA_CH15 (62 + IH2_BASE)
#define INT_1610_NAND (63 + IH2_BASE)
+#define INT_1610_SHA1MD5 (91 + IH2_BASE)
/*
* OMAP-730 specific IRQ numbers for interrupt handler 2
@@ -263,12 +265,16 @@
#define INT_24XX_GPTIMER10 46
#define INT_24XX_GPTIMER11 47
#define INT_24XX_GPTIMER12 48
+#define INT_24XX_SHA1MD5 51
#define INT_24XX_I2C1_IRQ 56
#define INT_24XX_I2C2_IRQ 57
+#define INT_24XX_HDQ_IRQ 58
#define INT_24XX_MCBSP1_IRQ_TX 59
#define INT_24XX_MCBSP1_IRQ_RX 60
#define INT_24XX_MCBSP2_IRQ_TX 62
#define INT_24XX_MCBSP2_IRQ_RX 63
+#define INT_24XX_SPI1_IRQ 65
+#define INT_24XX_SPI2_IRQ 66
#define INT_24XX_UART1_IRQ 72
#define INT_24XX_UART2_IRQ 73
#define INT_24XX_UART3_IRQ 74
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
index 505a38a..d240046 100644
--- a/arch/arm/plat-omap/include/mach/omap1510.h
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -44,5 +44,7 @@
#define OMAP1510_DSPREG_SIZE SZ_128K
#define OMAP1510_DSPREG_START 0xE1000000
+#define OMAP1510_DSP_MMU_BASE (0xfffed200)
+
#endif /* __ASM_ARCH_OMAP15XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
index c6c93af..0e69b50 100644
--- a/arch/arm/plat-omap/include/mach/omap16xx.h
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -44,6 +44,11 @@
#define OMAP16XX_DSPREG_SIZE SZ_128K
#define OMAP16XX_DSPREG_START 0xE1000000
+#define OMAP16XX_SEC_BASE 0xFFFE4000
+#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000)
+
/*
* ---------------------------------------------------------------------------
* Interrupts
@@ -190,7 +195,7 @@
#define WSPR_DISABLE_0 (0x0000aaaa)
#define WSPR_DISABLE_1 (0x00005555)
-/* Mailbox */
+#define OMAP16XX_DSP_MMU_BASE (0xfffed200)
#define OMAP16XX_MAILBOX_BASE (0xfffcf000)
#endif /* __ASM_ARCH_OMAP16XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
index cae037d..ec67fb4 100644
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -62,6 +62,7 @@
#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000
#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000
#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
/* Values from DSP must map to lower 16-bits */
@@ -305,6 +306,7 @@ struct lcd_ctrl {
int screen_width,
int pos_x, int pos_y, int width,
int height, int color_mode);
+ int (*set_rotate) (int angle);
int (*setup_mem) (int plane, size_t size,
int mem_type, unsigned long *paddr);
int (*mmap) (struct fb_info *info,
@@ -374,6 +376,7 @@ extern struct lcd_ctrl omap1_lcd_ctrl;
extern struct lcd_ctrl omap2_disp_ctrl;
#endif
+extern void omapfb_reserve_sdram(void);
extern void omapfb_register_panel(struct lcd_panel *panel);
extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
extern void omapfb_notify_clients(struct omapfb_device *fbdev,
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index d908eb5..25ee381 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -25,6 +25,8 @@
#define SDRC_DLLB_STATUS 0x06C
#define SDRC_POWER 0x070
#define SDRC_MR_0 0x084
+#define SDRC_ACTIM_CTRL_A 0x09c
+#define SDRC_ACTIM_CTRL_B 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
/*
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-10-03 11:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-03 11:56 [PATCH 0/0] Refreshed omap2 patches, v3 Tony Lindgren
2008-10-03 11:56 ` [PATCH 01/07] ARM: OMAP2 Provide function to enable/disable uart clocks Tony Lindgren
2008-10-03 11:56 ` [PATCH 02/07] ARM: OMAP2: Move sleep.S into sleep24xx.S Tony Lindgren
2008-10-03 11:56 ` [PATCH 03/07] ARM: OMAP2: Use omap_globals for CPU detection for multi-omap Tony Lindgren
2008-10-03 11:56 ` [PATCH 04/07] ARM: OMAP2: Add pinmux support for omap34xx Tony Lindgren
2008-10-03 11:56 ` [PATCH 05/07] ARM: OMAP2: Fix sparse, checkpatch warnings fro GPMC code, use ioremap Tony Lindgren
2008-10-03 11:56 ` Tony Lindgren [this message]
2008-10-03 11:56 ` [PATCH 07/07] ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code Tony Lindgren
2008-10-09 14:37 ` Russell King - ARM Linux
2008-10-09 15:04 ` Tony Lindgren
2008-10-08 7:39 ` [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree, v3 Tony Lindgren
2008-10-09 15:02 ` [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree, v4 Tony Lindgren
2008-10-03 12:13 ` [PATCH 0/0] Refreshed omap2 patches, v3 Tony Lindgren
2008-10-08 7:42 ` git-pull request for omap2 changes (Re: [PATCH 0/0] Refreshed omap2 patches, v3) Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1223035009-23866-7-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.