From: Jan Kara <jack@suse.cz>
To: ocfs2-devel@oss.oracle.com
Subject: [Ocfs2-devel] [PATCH 16/29] quota: Add helpers to allow ocfs2 specific quota initialization, freeing and recovery
Date: Sat, 25 Oct 2008 00:08:09 +0200 [thread overview]
Message-ID: <12248861033133-git-send-email-jack@suse.cz> (raw)
In-Reply-To: <122488610212-git-send-email-jack@suse.cz>
OCFS2 needs to peek whether quota structure is already in memory so
that it can avoid expensive cluster locking in that case. Similarly
when freeing dquots, it checks whether it is the last quota structure
user or not. Finally, it needs to get reference to dquot structure for
specified id and quota type when recovering quota file after crash.
Signed-off-by: Jan Kara <jack@suse.cz>
---
fs/dquot.c | 38 ++++++++++++++++++++++++++++++++------
include/linux/quotaops.h | 4 ++++
2 files changed, 36 insertions(+), 6 deletions(-)
diff --git a/fs/dquot.c b/fs/dquot.c
index 124a20a..f6bcacd 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -213,8 +213,6 @@ static struct hlist_head *dquot_hash;
struct dqstats dqstats;
-static void dqput(struct dquot *dquot);
-
static inline unsigned int
hashfn(const struct super_block *sb, unsigned int id, int type)
{
@@ -568,7 +566,7 @@ static struct shrinker dqcache_shrinker = {
* NOTE: If you change this function please check whether dqput_blocks() works right...
* MUST be called with either dqptr_sem or dqonoff_mutex held
*/
-static void dqput(struct dquot *dquot)
+void dqput(struct dquot *dquot)
{
int ret;
@@ -660,10 +658,28 @@ static struct dquot *get_empty_dquot(struct super_block *sb, int type)
}
/*
+ * Check whether dquot is in memory.
+ * MUST be called with either dqptr_sem or dqonoff_mutex held
+ */
+int dquot_is_cached(struct super_block *sb, unsigned int id, int type)
+{
+ unsigned int hashent = hashfn(sb, id, type);
+ int ret = 0;
+
+ if (!sb_has_quota_active(sb, type))
+ return 0;
+ spin_lock(&dq_list_lock);
+ if (find_dquot(hashent, sb, id, type) != NODQUOT)
+ ret = 1;
+ spin_unlock(&dq_list_lock);
+ return ret;
+}
+
+/*
* Get reference to dquot
* MUST be called with either dqptr_sem or dqonoff_mutex held
*/
-static struct dquot *dqget(struct super_block *sb, unsigned int id, int type)
+struct dquot *dqget(struct super_block *sb, unsigned int id, int type)
{
unsigned int hashent = hashfn(sb, id, type);
struct dquot *dquot, *empty = NODQUOT;
@@ -1182,17 +1198,23 @@ out_err:
* Release all quotas referenced by inode
* Transaction must be started at an entry
*/
-int dquot_drop(struct inode *inode)
+int dquot_drop_locked(struct inode *inode)
{
int cnt;
- down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
if (inode->i_dquot[cnt] != NODQUOT) {
dqput(inode->i_dquot[cnt]);
inode->i_dquot[cnt] = NODQUOT;
}
}
+ return 0;
+}
+
+int dquot_drop(struct inode *inode)
+{
+ down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+ dquot_drop_locked(inode);
up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
return 0;
}
@@ -2304,7 +2326,11 @@ EXPORT_SYMBOL(dquot_release);
EXPORT_SYMBOL(dquot_mark_dquot_dirty);
EXPORT_SYMBOL(dquot_initialize);
EXPORT_SYMBOL(dquot_drop);
+EXPORT_SYMBOL(dquot_drop_locked);
EXPORT_SYMBOL(vfs_dq_drop);
+EXPORT_SYMBOL(dqget);
+EXPORT_SYMBOL(dqput);
+EXPORT_SYMBOL(dquot_is_cached);
EXPORT_SYMBOL(dquot_alloc_space);
EXPORT_SYMBOL(dquot_alloc_inode);
EXPORT_SYMBOL(dquot_free_space);
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 94f00ec..1f990f2 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -27,6 +27,10 @@ void sync_dquots(struct super_block *sb, int type);
int dquot_initialize(struct inode *inode, int type);
int dquot_drop(struct inode *inode);
+int dquot_drop_locked(struct inode *inode);
+struct dquot *dqget(struct super_block *sb, unsigned int id, int type);
+void dqput(struct dquot *dquot);
+int dquot_is_cached(struct super_block *sb, unsigned int id, int type);
int dquot_alloc_space(struct inode *inode, qsize_t number, int prealloc);
int dquot_alloc_inode(const struct inode *inode, qsize_t number);
--
1.5.2.4
next prev parent reply other threads:[~2008-10-24 22:08 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-24 22:07 [Ocfs2-devel] [PATCH 00/00] Implement quotas for OCFS2 (version 2) Jan Kara
2008-10-24 22:07 ` [Ocfs2-devel] [PATCH 01/29] quota: Add callbacks for allocating and destroying dquot structures Jan Kara
2008-10-24 22:07 ` [Ocfs2-devel] [PATCH 02/29] quota: Increase size of variables for limits and inode usage Jan Kara
2008-10-24 22:07 ` [Ocfs2-devel] [PATCH 03/29] quota: Remove bogus 'optimization' in check_idq() and check_bdq() Jan Kara
2008-10-24 22:07 ` [Ocfs2-devel] [PATCH 04/29] quota: Make _SUSPENDED just a flag Jan Kara
2008-10-24 22:07 ` [Ocfs2-devel] [PATCH 05/29] quota: Allow to separately enable quota accounting and enforcing limits Jan Kara
2008-10-24 22:07 ` [Ocfs2-devel] [PATCH 06/29] ext3: Use sb_any_quota_loaded() instead of sb_any_quota_enabled() Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 07/29] ext4: " Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 08/29] reiserfs: " Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 09/29] quota: Remove compatibility function sb_any_quota_enabled() Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 10/29] quota: Introduce DQUOT_QUOTA_SYS_FILE flag Jan Kara
2008-10-29 23:09 ` Mark Fasheh
2008-10-30 7:24 ` Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 11/29] quota: Move quotaio_v[12].h from include/linux/ to fs/ Jan Kara
2008-10-29 23:10 ` Mark Fasheh
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 12/29] quota: Split off quota tree handling into a separate file Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 13/29] quota: Convert union in mem_dqinfo to a pointer Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 14/29] quota: Allow negative usage of space and inodes Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 15/29] quota: Keep which entries were set by SETQUOTA quotactl Jan Kara
2008-10-24 22:08 ` Jan Kara [this message]
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 17/29] quota: Implement function for scanning active dquots Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 18/29] mm: Export pdflush_operation() Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 19/29] ocfs2: Fix check of return value of ocfs2_start_trans() Jan Kara
2008-10-30 23:34 ` Mark Fasheh
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 20/29] ocfs2: Support nested transactions Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 21/29] ocfs2: Fix checking of return value of new_inode() Jan Kara
2008-10-30 23:51 ` Mark Fasheh
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 22/29] ocfs2: Let inode be really deleted when ocfs2_mknod_locked() fails Jan Kara
2008-10-30 23:52 ` Mark Fasheh
2008-10-31 5:05 ` Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 23/29] ocfs2: Assign feature bits and system inodes to quota feature and quota files Jan Kara
2008-10-28 22:16 ` Joel Becker
2008-10-29 2:32 ` Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 24/29] ocfs2: Mark system files as not subject to quota accounting Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 25/29] ocfs2: Implementation of local and global quota file handling Jan Kara
2008-10-28 19:07 ` Joel Becker
2008-10-28 19:36 ` Joel Becker
2008-10-29 2:29 ` Jan Kara
2008-10-29 10:51 ` Joel Becker
2008-10-30 7:33 ` Jan Kara
2008-10-30 20:31 ` Joel Becker
2008-10-31 5:00 ` Jan Kara
2008-11-05 22:49 ` Mark Fasheh
2008-11-20 14:53 ` Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 26/29] ocfs2: Add quota calls for allocation and freeing of inodes and space Jan Kara
2008-11-06 0:06 ` Mark Fasheh
2008-11-20 15:19 ` Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 27/29] ocfs2: Implement quota syncing thread Jan Kara
2008-11-06 0:27 ` Mark Fasheh
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 28/29] ocfs2: Implement quota recovery Jan Kara
2008-11-06 0:52 ` Mark Fasheh
2008-11-20 16:51 ` Jan Kara
2008-10-24 22:08 ` [Ocfs2-devel] [PATCH 29/29] ocfs2: Enable quota accounting on mount, disable on umount Jan Kara
2008-10-28 19:11 ` Joel Becker
2008-10-29 2:30 ` Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12248861033133-git-send-email-jack@suse.cz \
--to=jack@suse.cz \
--cc=ocfs2-devel@oss.oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.