Re: Pinnacle PCTV 310i Remote: i2c 'ERROR: NO_DEVICE'

[hermann pitton <hermann-pitton@arcor.de>]

Hi Matteo,

Am Dienstag, den 04.11.2008, 15:09 +0100 schrieb picciuX:
> 2008/11/2 hermann pitton <hermann-pitton@arcor.de>:
> 
> > don't have that remote, but also enable ir-kbd-i2c debug=1.
> >
> > ir-kbd-i2c: probe 0x7a @ saa7133[0]: no
> > ir-kbd-i2c: probe 0x47 @ saa7133[0]: no
> > ir-kbd-i2c: probe 0x71 @ saa7133[0]: no
> > ir-kbd-i2c: probe 0x2d @ saa7133[0]: no
> > ir-kbd-i2c: probe 0x7a @ saa7133[1]: no
> > ir-kbd-i2c: probe 0x47 @ saa7133[1]: no
> > ir-kbd-i2c: probe 0x71 @ saa7133[1]: no
> > ir-kbd-i2c: probe 0x2d @ saa7133[1]: no
> >
> > You should have the device found at 0x47.
> >
> 
> In fact i see:
> 
> ir-kbd-i2c: probe 0x47 @ saa7133[0]: yes
> 
> So everything seemed to go well. But, same story for the rest: ERROR:
> NO_DEVICE when i press buttons on the remote.
> What seems strange to me is the fact that the driver *reacts* to
> remote key presses, but reacts with an error.
> 
> Cheers
> Matteo
> 

since you reported the trouble was already visible for you on earlier
kernels, we might try to get a second confirmation at first.

Anyone out there? I'm sending a copy to Ricardo too, who added the
support, not sure if he currently has time to read the list.

Cheers,
Hermann





--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list