All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org,
	Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Hugo Villeneuve <hugo@hugovil.com>
Subject: [PATCH 2/6] ASoC: Add PCM3008 ALSA SoC driver
Date: Wed, 19 Nov 2008 13:36:29 +0000	[thread overview]
Message-ID: <1227101793-3768-2-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1227101793-3768-1-git-send-email-broonie@opensource.wolfsonmicro.com>

From: Hugo Villeneuve <hugo@hugovil.com>

The PCM3008 is a 16-bit stereo audio codec. It accepts
left-justified format for ADC, and right-justified format
for DAC. Independent power-down modes for ADC and DAC are
provided, as well as a digital de-emphasis filter (4 modes).

[Merged Makefile & Kconfig, changed asm/gpio.h to linux/gpio.h -- broonie]

Signed-off-by: Hugo Villeneuve <hugo@hugovil.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/Kconfig   |    4 +
 sound/soc/codecs/Makefile  |    2 +
 sound/soc/codecs/pcm3008.c |  201 ++++++++++++++++++++++++++++++++++++++++++++
 sound/soc/codecs/pcm3008.h |   25 ++++++
 4 files changed, 232 insertions(+), 0 deletions(-)
 create mode 100644 sound/soc/codecs/pcm3008.c
 create mode 100644 sound/soc/codecs/pcm3008.h

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 04f49f5..bf68052 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -5,6 +5,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_AD73311 if I2C
 	select SND_SOC_AK4535 if I2C
 	select SND_SOC_CS4270 if I2C
+	select SND_SOC_PCM3008
 	select SND_SOC_SSM2602 if I2C
 	select SND_SOC_TLV320AIC23 if I2C
 	select SND_SOC_TLV320AIC26 if SPI_MASTER
@@ -70,6 +71,9 @@ config SND_SOC_CS4270_VD33_ERRATA
 config SND_SOC_L3
        tristate
 
+config SND_SOC_PCM3008
+       tristate
+
 config SND_SOC_SSM2602
 	tristate
 
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index de65723..9a20fdd 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -4,6 +4,7 @@ snd-soc-ad73311-objs := ad73311.o
 snd-soc-ak4535-objs := ak4535.o
 snd-soc-cs4270-objs := cs4270.o
 snd-soc-l3-objs := l3.o
+snd-soc-pcm3008-objs := pcm3008.o
 snd-soc-ssm2602-objs := ssm2602.o
 snd-soc-tlv320aic23-objs := tlv320aic23.o
 snd-soc-tlv320aic26-objs := tlv320aic26.o
@@ -30,6 +31,7 @@ obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o
 obj-$(CONFIG_SND_SOC_AK4535)	+= snd-soc-ak4535.o
 obj-$(CONFIG_SND_SOC_CS4270)	+= snd-soc-cs4270.o
 obj-$(CONFIG_SND_SOC_L3)	+= snd-soc-l3.o
+obj-$(CONFIG_SND_SOC_PCM3008)	+= snd-soc-pcm3008.o
 obj-$(CONFIG_SND_SOC_SSM2602)	+= snd-soc-ssm2602.o
 obj-$(CONFIG_SND_SOC_TLV320AIC23)	+= snd-soc-tlv320aic23.o
 obj-$(CONFIG_SND_SOC_TLV320AIC26)	+= snd-soc-tlv320aic26.o
diff --git a/sound/soc/codecs/pcm3008.c b/sound/soc/codecs/pcm3008.c
new file mode 100644
index 0000000..2b26e1d
--- /dev/null
+++ b/sound/soc/codecs/pcm3008.c
@@ -0,0 +1,201 @@
+/*
+ * ALSA Soc PCM3008 codec support
+ *
+ * Author:	Hugo Villeneuve
+ * Copyright (C) 2008 Lyrtech inc
+ *
+ * Based on AC97 Soc codec, original copyright follow:
+ * Copyright 2005 Wolfson Microelectronics PLC.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ * Generic PCM3008 support.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include "pcm3008.h"
+
+#define PCM3008_VERSION "0.2"
+
+#define PCM3008_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |	\
+		       SNDRV_PCM_RATE_48000)
+
+struct snd_soc_dai pcm3008_dai = {
+	.name = "PCM3008 HiFi",
+	.type = SND_SOC_DAI_I2S,
+	.playback = {
+		.stream_name = "PCM3008 Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = PCM3008_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.capture = {
+		.stream_name = "PCM3008 Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = PCM3008_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	},
+};
+EXPORT_SYMBOL_GPL(pcm3008_dai);
+
+static void pcm3008_gpio_free(struct pcm3008_setup_data *setup)
+{
+	gpio_free(setup->dem0_pin);
+	gpio_free(setup->dem1_pin);
+	gpio_free(setup->pdad_pin);
+	gpio_free(setup->pdda_pin);
+}
+
+static int pcm3008_soc_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	struct pcm3008_setup_data *setup = socdev->codec_data;
+	int ret = 0;
+
+	printk(KERN_INFO "PCM3008 SoC Audio Codec %s\n", PCM3008_VERSION);
+
+	socdev->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+	if (!socdev->codec)
+		return -ENOMEM;
+
+	codec = socdev->codec;
+	mutex_init(&codec->mutex);
+
+	codec->name = "PCM3008";
+	codec->owner = THIS_MODULE;
+	codec->dai = &pcm3008_dai;
+	codec->num_dai = 1;
+	codec->write = NULL;
+	codec->read = NULL;
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	/* Register PCMs. */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		printk(KERN_ERR "pcm3008: failed to create pcms\n");
+		goto pcm_err;
+	}
+
+	/* Register Card. */
+	ret = snd_soc_register_card(socdev);
+	if (ret < 0) {
+		printk(KERN_ERR "pcm3008: failed to register card\n");
+		goto card_err;
+	}
+
+	/* DEM1  DEM0  DE-EMPHASIS_MODE
+	 * Low   Low   De-emphasis 44.1 kHz ON
+	 * Low   High  De-emphasis OFF
+	 * High  Low   De-emphasis 48 kHz ON
+	 * High  High  De-emphasis 32 kHz ON
+	 */
+
+	/* Configure DEM0 GPIO (turning OFF DAC De-emphasis). */
+	ret = gpio_request(setup->dem0_pin, "codec_dem0");
+	if (ret == 0)
+		ret = gpio_direction_output(setup->dem0_pin, 1);
+	if (ret != 0)
+		goto gpio_err;
+
+	/* Configure DEM1 GPIO (turning OFF DAC De-emphasis). */
+	ret = gpio_request(setup->dem1_pin, "codec_dem1");
+	if (ret == 0)
+		ret = gpio_direction_output(setup->dem1_pin, 0);
+	if (ret != 0)
+		goto gpio_err;
+
+	/* Configure PDAD GPIO. */
+	ret = gpio_request(setup->pdad_pin, "codec_pdad");
+	if (ret == 0)
+		ret = gpio_direction_output(setup->pdad_pin, 1);
+	if (ret != 0)
+		goto gpio_err;
+
+	/* Configure PDDA GPIO. */
+	ret = gpio_request(setup->pdda_pin, "codec_pdda");
+	if (ret == 0)
+		ret = gpio_direction_output(setup->pdda_pin, 1);
+	if (ret != 0)
+		goto gpio_err;
+
+	return ret;
+
+gpio_err:
+	pcm3008_gpio_free(setup);
+card_err:
+	snd_soc_free_pcms(socdev);
+pcm_err:
+	kfree(socdev->codec);
+
+	return ret;
+}
+
+static int pcm3008_soc_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+	struct pcm3008_setup_data *setup = socdev->codec_data;
+
+	if (!codec)
+		return 0;
+
+	pcm3008_gpio_free(setup);
+	snd_soc_free_pcms(socdev);
+	kfree(socdev->codec);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pcm3008_soc_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct pcm3008_setup_data *setup = socdev->codec_data;
+
+	gpio_set_value(setup->pdad_pin, 0);
+	gpio_set_value(setup->pdda_pin, 0);
+
+	return 0;
+}
+
+static int pcm3008_soc_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct pcm3008_setup_data *setup = socdev->codec_data;
+
+	gpio_set_value(setup->pdad_pin, 1);
+	gpio_set_value(setup->pdda_pin, 1);
+
+	return 0;
+}
+#else
+#define pcm3008_soc_suspend NULL
+#define pcm3008_soc_resume NULL
+#endif
+
+struct snd_soc_codec_device soc_codec_dev_pcm3008 = {
+	.probe = 	pcm3008_soc_probe,
+	.remove = 	pcm3008_soc_remove,
+	.suspend =	pcm3008_soc_suspend,
+	.resume =	pcm3008_soc_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_pcm3008);
+
+MODULE_DESCRIPTION("Soc PCM3008 driver");
+MODULE_AUTHOR("Hugo Villeneuve");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/pcm3008.h b/sound/soc/codecs/pcm3008.h
new file mode 100644
index 0000000..d04e87d
--- /dev/null
+++ b/sound/soc/codecs/pcm3008.h
@@ -0,0 +1,25 @@
+/*
+ * PCM3008 ALSA SoC Layer
+ *
+ * Author:	Hugo Villeneuve
+ * Copyright (C) 2008 Lyrtech inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_SOC_PCM3008_H
+#define __LINUX_SND_SOC_PCM3008_H
+
+struct pcm3008_setup_data {
+	unsigned dem0_pin;
+	unsigned dem1_pin;
+	unsigned pdad_pin;
+	unsigned pdda_pin;
+};
+
+extern struct snd_soc_codec_device soc_codec_dev_pcm3008;
+extern struct snd_soc_dai pcm3008_dai;
+
+#endif
-- 
1.5.6.5

  reply	other threads:[~2008-11-19 13:36 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-19 13:34 [PATCH 0/6] ASoC updates Mark Brown
2008-11-19 13:36 ` [PATCH 1/6] ASoC: Remove unused snd_soc_machine_config declaration Mark Brown
2008-11-19 13:36   ` Mark Brown [this message]
2008-11-19 13:36     ` [PATCH 3/6] ASoC: Add driver for the Lyrtech SFFSDR board Mark Brown
2008-11-19 13:36       ` [PATCH 4/6] ASoC: Add support for omap2evm board Mark Brown
2008-11-19 13:36         ` [PATCH 5/6] ASoC: s3c24xx_uda134x DAI accessor functions and static cleanup Mark Brown
2008-11-19 13:36           ` [PATCH 6/6] ASoC: Convert blackfin machines to use DAI accessor functions Mark Brown
2008-11-19 13:48 ` [PATCH 0/6] ASoC updates Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1227101793-3768-2-git-send-email-broonie@opensource.wolfsonmicro.com \
    --to=broonie@opensource.wolfsonmicro.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=hugo@hugovil.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.