From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Hugo Villeneuve <hugo@hugovil.com>
Subject: [PATCH 3/6] ASoC: Add driver for the Lyrtech SFFSDR board
Date: Wed, 19 Nov 2008 13:36:30 +0000 [thread overview]
Message-ID: <1227101793-3768-3-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1227101793-3768-2-git-send-email-broonie@opensource.wolfsonmicro.com>
From: Hugo Villeneuve <hugo@hugovil.com>
The PCM3008 is used on the Lyrtech SFFSDR board, in conjunction with an
FPGA that generates the bit clock and the master clock
[Downgraded the rate debug print to pr_debug() in hw_params, converted
asm/gpio.h to linux/gpio.h -- broonie]
Signed-off-by: Hugo Villeneuve <hugo@hugovil.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
sound/soc/davinci/Kconfig | 10 +++
sound/soc/davinci/Makefile | 2 +
sound/soc/davinci/davinci-sffsdr.c | 156 ++++++++++++++++++++++++++++++++++++
3 files changed, 168 insertions(+), 0 deletions(-)
create mode 100644 sound/soc/davinci/davinci-sffsdr.c
diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig
index 8f7e338..b502741 100644
--- a/sound/soc/davinci/Kconfig
+++ b/sound/soc/davinci/Kconfig
@@ -17,3 +17,13 @@ config SND_DAVINCI_SOC_EVM
help
Say Y if you want to add support for SoC audio on TI
DaVinci EVM platform.
+
+config SND_DAVINCI_SOC_SFFSDR
+ tristate "SoC Audio support for SFFSDR"
+ depends on SND_DAVINCI_SOC && MACH_DAVINCI_SFFSDR
+ select SND_DAVINCI_SOC_I2S
+ select SND_SOC_PCM3008
+ select SFFSDR_FPGA
+ help
+ Say Y if you want to add support for SoC audio on
+ Lyrtech SFFSDR board.
diff --git a/sound/soc/davinci/Makefile b/sound/soc/davinci/Makefile
index ca772e5..ca8bae1 100644
--- a/sound/soc/davinci/Makefile
+++ b/sound/soc/davinci/Makefile
@@ -7,5 +7,7 @@ obj-$(CONFIG_SND_DAVINCI_SOC_I2S) += snd-soc-davinci-i2s.o
# DAVINCI Machine Support
snd-soc-evm-objs := davinci-evm.o
+snd-soc-sffsdr-objs := davinci-sffsdr.o
obj-$(CONFIG_SND_DAVINCI_SOC_EVM) += snd-soc-evm.o
+obj-$(CONFIG_SND_DAVINCI_SOC_SFFSDR) += snd-soc-sffsdr.o
diff --git a/sound/soc/davinci/davinci-sffsdr.c b/sound/soc/davinci/davinci-sffsdr.c
new file mode 100644
index 0000000..69a8a76
--- /dev/null
+++ b/sound/soc/davinci/davinci-sffsdr.c
@@ -0,0 +1,156 @@
+/*
+ * ASoC driver for Lyrtech SFFSDR board.
+ *
+ * Author: Hugo Villeneuve
+ * Copyright (C) 2008 Lyrtech inc
+ *
+ * Based on ASoC driver for TI DAVINCI EVM platform, original copyright follow:
+ * Copyright: (C) 2007 MontaVista Software, Inc., <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/dma.h>
+#include <asm/plat-sffsdr/sffsdr-fpga.h>
+
+#include <mach/mcbsp.h>
+#include <mach/edma.h>
+
+#include "../codecs/pcm3008.h"
+#include "davinci-pcm.h"
+#include "davinci-i2s.h"
+
+static int sffsdr_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int fs;
+ int ret = 0;
+
+ /* Set cpu DAI configuration:
+ * CLKX and CLKR are the inputs for the Sample Rate Generator.
+ * FSX and FSR are outputs, driven by the sample Rate Generator. */
+ ret = snd_soc_dai_set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_RIGHT_J |
+ SND_SOC_DAIFMT_CBM_CFS |
+ SND_SOC_DAIFMT_IB_NF);
+ if (ret < 0)
+ return ret;
+
+ /* Fsref can be 32000, 44100 or 48000. */
+ fs = params_rate(params);
+
+ pr_debug("sffsdr_hw_params: rate = %d Hz\n", fs);
+
+ return sffsdr_fpga_set_codec_fs(fs);
+}
+
+static struct snd_soc_ops sffsdr_ops = {
+ .hw_params = sffsdr_hw_params,
+};
+
+/* davinci-sffsdr digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link sffsdr_dai = {
+ .name = "PCM3008", /* Codec name */
+ .stream_name = "PCM3008 HiFi",
+ .cpu_dai = &davinci_i2s_dai,
+ .codec_dai = &pcm3008_dai,
+ .ops = &sffsdr_ops,
+};
+
+/* davinci-sffsdr audio machine driver */
+static struct snd_soc_machine snd_soc_machine_sffsdr = {
+ .name = "DaVinci SFFSDR",
+ .dai_link = &sffsdr_dai,
+ .num_links = 1,
+};
+
+/* sffsdr audio private data */
+static struct pcm3008_setup_data sffsdr_pcm3008_setup = {
+ .dem0_pin = GPIO(45),
+ .dem1_pin = GPIO(46),
+ .pdad_pin = GPIO(47),
+ .pdda_pin = GPIO(38),
+};
+
+/* sffsdr audio subsystem */
+static struct snd_soc_device sffsdr_snd_devdata = {
+ .machine = &snd_soc_machine_sffsdr,
+ .platform = &davinci_soc_platform,
+ .codec_dev = &soc_codec_dev_pcm3008,
+ .codec_data = &sffsdr_pcm3008_setup,
+};
+
+static struct resource sffsdr_snd_resources[] = {
+ {
+ .start = DAVINCI_MCBSP_BASE,
+ .end = DAVINCI_MCBSP_BASE + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct evm_snd_platform_data sffsdr_snd_data = {
+ .tx_dma_ch = DAVINCI_DMA_MCBSP_TX,
+ .rx_dma_ch = DAVINCI_DMA_MCBSP_RX,
+};
+
+static struct platform_device *sffsdr_snd_device;
+
+static int __init sffsdr_init(void)
+{
+ int ret;
+
+ sffsdr_snd_device = platform_device_alloc("soc-audio", 0);
+ if (!sffsdr_snd_device) {
+ printk(KERN_ERR "platform device allocation failed\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(sffsdr_snd_device, &sffsdr_snd_devdata);
+ sffsdr_snd_devdata.dev = &sffsdr_snd_device->dev;
+ sffsdr_snd_device->dev.platform_data = &sffsdr_snd_data;
+
+ ret = platform_device_add_resources(sffsdr_snd_device,
+ sffsdr_snd_resources,
+ ARRAY_SIZE(sffsdr_snd_resources));
+ if (ret) {
+ printk(KERN_ERR "platform device add ressources failed\n");
+ goto error;
+ }
+
+ ret = platform_device_add(sffsdr_snd_device);
+ if (ret)
+ goto error;
+
+ return ret;
+
+error:
+ platform_device_put(sffsdr_snd_device);
+ return ret;
+}
+
+static void __exit sffsdr_exit(void)
+{
+ platform_device_unregister(sffsdr_snd_device);
+}
+
+module_init(sffsdr_init);
+module_exit(sffsdr_exit);
+
+MODULE_AUTHOR("Hugo Villeneuve");
+MODULE_DESCRIPTION("Lyrtech SFFSDR ASoC driver");
+MODULE_LICENSE("GPL");
--
1.5.6.5
next prev parent reply other threads:[~2008-11-19 13:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-19 13:34 [PATCH 0/6] ASoC updates Mark Brown
2008-11-19 13:36 ` [PATCH 1/6] ASoC: Remove unused snd_soc_machine_config declaration Mark Brown
2008-11-19 13:36 ` [PATCH 2/6] ASoC: Add PCM3008 ALSA SoC driver Mark Brown
2008-11-19 13:36 ` Mark Brown [this message]
2008-11-19 13:36 ` [PATCH 4/6] ASoC: Add support for omap2evm board Mark Brown
2008-11-19 13:36 ` [PATCH 5/6] ASoC: s3c24xx_uda134x DAI accessor functions and static cleanup Mark Brown
2008-11-19 13:36 ` [PATCH 6/6] ASoC: Convert blackfin machines to use DAI accessor functions Mark Brown
2008-11-19 13:48 ` [PATCH 0/6] ASoC updates Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1227101793-3768-3-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=hugo@hugovil.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.