From: Borislav Petkov <petkovbb@googlemail.com>
To: bzolnier@gmail.com, linux-ide@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Borislav Petkov <petkovbb@gmail.com>
Subject: [PATCH 3/3] ide-floppy: allocate only toplevel packet commands
Date: Thu, 20 Nov 2008 06:41:23 +0100 [thread overview]
Message-ID: <1227159683-2487-4-git-send-email-petkovbb@gmail.com> (raw)
In-Reply-To: <1227159683-2487-1-git-send-email-petkovbb@gmail.com>
This makes the top-level function just allocate a single pc entry, and then
pass it down as a pointer to all the helper functions that also need one
of those "struct ide_atapi_pc" things. As far as I can tell, the use of
these things never overlaps each other, BUT I DID NOT CHECK VERY CLOSELY!
So I'm not guaranteeing this is correct, and I don't have the hardware. It
would be good for somebody who knows the code more, and has the hardware,
could please test this?
With this, ide-floppy still has fairly big stack usage, but instead of
idefloppy_ioctl [vmlinux]: 1208
ide_floppy_get_capacity [vmlinux]: 872
idefloppy_release [vmlinux]: 408
idefloppy_open [vmlinux]: 408
where those two first ones are at the very top of the list of stack users
for me, it's now
ide_floppy_get_capacity [vmlinux]: 404
ide_floppy_ioctl [vmlinux]: 364
ie they are still high, but they are no longer at the top.
Borislav: Since ide_floppy_get_capacity is passed as a function pointer to other
parts of the kernel (e.g., block layer) we need that ide_atapi_pc to be created
on stack. Also, redid stack users numbers above. The two functions missing from
Linus' original 'make stackusage' output are due to ide being
rewritten/reorganized atm.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-floppy.c | 26 +++++++++---------
drivers/ide/ide-floppy_ioctl.c | 58 ++++++++++++++++++++-------------------
2 files changed, 43 insertions(+), 41 deletions(-)
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index aeb1ad7..1f07f38 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -342,38 +342,38 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
* Look at the flexible disk page parameters. We ignore the CHS capacity
* parameters and use the LBA parameters instead.
*/
-static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
+static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
+ struct ide_atapi_pc *pc)
{
struct ide_disk_obj *floppy = drive->driver_data;
struct gendisk *disk = floppy->disk;
- struct ide_atapi_pc pc;
u8 *page;
int capacity, lba_capacity;
u16 transfer_rate, sector_size, cyls, rpm;
u8 heads, sectors;
- ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
+ ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
- if (ide_queue_pc_tail(drive, disk, &pc)) {
+ if (ide_queue_pc_tail(drive, disk, pc)) {
printk(KERN_ERR PFX "Can't get flexible disk page params\n");
return 1;
}
- if (pc.buf[3] & 0x80)
+ if (pc->buf[3] & 0x80)
drive->dev_flags |= IDE_DFLAG_WP;
else
drive->dev_flags &= ~IDE_DFLAG_WP;
set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP));
- page = &pc.buf[8];
+ page = &pc->buf[8];
- transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]);
- sector_size = be16_to_cpup((__be16 *)&pc.buf[8 + 6]);
- cyls = be16_to_cpup((__be16 *)&pc.buf[8 + 8]);
- rpm = be16_to_cpup((__be16 *)&pc.buf[8 + 28]);
- heads = pc.buf[8 + 4];
- sectors = pc.buf[8 + 5];
+ transfer_rate = be16_to_cpup((__be16 *)&pc->buf[8 + 2]);
+ sector_size = be16_to_cpup((__be16 *)&pc->buf[8 + 6]);
+ cyls = be16_to_cpup((__be16 *)&pc->buf[8 + 8]);
+ rpm = be16_to_cpup((__be16 *)&pc->buf[8 + 28]);
+ heads = pc->buf[8 + 4];
+ sectors = pc->buf[8 + 5];
capacity = cyls * heads * sectors * sector_size;
@@ -499,7 +499,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
/* Clik! disk does not support get_flexible_disk_page */
if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
- (void) ide_floppy_get_flexible_disk_page(drive);
+ (void) ide_floppy_get_flexible_disk_page(drive, &pc);
return rc;
}
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index 2bc51ff..8f8be85 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -31,10 +31,11 @@
* On exit we set nformats to the number of records we've actually initialized.
*/
-static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
+static int ide_floppy_get_format_capacities(ide_drive_t *drive,
+ struct ide_atapi_pc *pc,
+ int __user *arg)
{
struct ide_disk_obj *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
u8 header_len, desc_cnt;
int i, blocks, length, u_array_size, u_index;
int __user *argp;
@@ -45,13 +46,13 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
if (u_array_size <= 0)
return -EINVAL;
- ide_floppy_create_read_capacity_cmd(&pc);
- if (ide_queue_pc_tail(drive, floppy->disk, &pc)) {
+ ide_floppy_create_read_capacity_cmd(pc);
+ if (ide_queue_pc_tail(drive, floppy->disk, pc)) {
printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
return -EIO;
}
- header_len = pc.buf[3];
+ header_len = pc->buf[3];
desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
u_index = 0;
@@ -68,8 +69,8 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
if (u_index >= u_array_size)
break; /* User-supplied buffer too small */
- blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
- length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
+ blocks = be32_to_cpup((__be32 *)&pc->buf[desc_start]);
+ length = be16_to_cpup((__be16 *)&pc->buf[desc_start + 6]);
if (put_user(blocks, argp))
return -EFAULT;
@@ -111,29 +112,28 @@ static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
pc->flags |= PC_FLAG_WRITING;
}
-static int ide_floppy_get_sfrp_bit(ide_drive_t *drive)
+static int ide_floppy_get_sfrp_bit(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
struct ide_disk_obj *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
drive->atapi_flags &= ~IDE_AFLAG_SRFP;
- ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE);
- pc.flags |= PC_FLAG_SUPPRESS_ERROR;
+ ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_CAPABILITIES_PAGE);
+ pc->flags |= PC_FLAG_SUPPRESS_ERROR;
- if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ if (ide_queue_pc_tail(drive, floppy->disk, pc))
return 1;
- if (pc.buf[8 + 2] & 0x40)
+ if (pc->buf[8 + 2] & 0x40)
drive->atapi_flags |= IDE_AFLAG_SRFP;
return 0;
}
-static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
+static int ide_floppy_format_unit(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ int __user *arg)
{
struct ide_disk_obj *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
int blocks, length, flags, err = 0;
if (floppy->openers > 1) {
@@ -166,10 +166,10 @@ static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
goto out;
}
- (void)ide_floppy_get_sfrp_bit(drive);
- ide_floppy_create_format_unit_cmd(&pc, blocks, length, flags);
+ ide_floppy_get_sfrp_bit(drive, pc);
+ ide_floppy_create_format_unit_cmd(pc, blocks, length, flags);
- if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ if (ide_queue_pc_tail(drive, floppy->disk, pc))
err = -EIO;
out:
@@ -188,15 +188,16 @@ out:
* the dsc bit, and return either 0 or 65536.
*/
-static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
+static int ide_floppy_get_format_progress(ide_drive_t *drive,
+ struct ide_atapi_pc *pc,
+ int __user *arg)
{
struct ide_disk_obj *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
int progress_indication = 0x10000;
if (drive->atapi_flags & IDE_AFLAG_SRFP) {
- ide_create_request_sense_cmd(drive, &pc);
- if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ ide_create_request_sense_cmd(drive, pc);
+ if (ide_queue_pc_tail(drive, floppy->disk, pc))
return -EIO;
if (floppy->sense_key == 2 &&
@@ -241,20 +242,21 @@ static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
return 0;
}
-static int ide_floppy_format_ioctl(ide_drive_t *drive, fmode_t mode,
- unsigned int cmd, void __user *argp)
+static int ide_floppy_format_ioctl(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ fmode_t mode, unsigned int cmd,
+ void __user *argp)
{
switch (cmd) {
case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
return 0;
case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
- return ide_floppy_get_format_capacities(drive, argp);
+ return ide_floppy_get_format_capacities(drive, pc, argp);
case IDEFLOPPY_IOCTL_FORMAT_START:
if (!(mode & FMODE_WRITE))
return -EPERM;
- return ide_floppy_format_unit(drive, (int __user *)argp);
+ return ide_floppy_format_unit(drive, pc, (int __user *)argp);
case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
- return ide_floppy_get_format_progress(drive, argp);
+ return ide_floppy_get_format_progress(drive, pc, argp);
default:
return -ENOTTY;
}
@@ -270,7 +272,7 @@ int ide_floppy_ioctl(ide_drive_t *drive, struct block_device *bdev,
if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
return ide_floppy_lockdoor(drive, &pc, arg, cmd);
- err = ide_floppy_format_ioctl(drive, mode, cmd, argp);
+ err = ide_floppy_format_ioctl(drive, &pc, mode, cmd, argp);
if (err != -ENOTTY)
return err;
--
1.6.0.4
WARNING: multiple messages have this Message-ID (diff)
From: Borislav Petkov <petkovbb@googlemail.com>
To: <bzolnier@gmail.com>,
linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Borislav Petkov <petkovbb@gmail.com>
Subject: [PATCH 3/3] ide-floppy: allocate only toplevel packet commands
Date: Thu, 20 Nov 2008 06:41:23 +0100 [thread overview]
Message-ID: <1227159683-2487-4-git-send-email-petkovbb@gmail.com> (raw)
In-Reply-To: <1227159683-2487-1-git-send-email-petkovbb@gmail.com>
This makes the top-level function just allocate a single pc entry, and then
pass it down as a pointer to all the helper functions that also need one
of those "struct ide_atapi_pc" things. As far as I can tell, the use of
these things never overlaps each other, BUT I DID NOT CHECK VERY CLOSELY!
So I'm not guaranteeing this is correct, and I don't have the hardware. It
would be good for somebody who knows the code more, and has the hardware,
could please test this?
With this, ide-floppy still has fairly big stack usage, but instead of
idefloppy_ioctl [vmlinux]: 1208
ide_floppy_get_capacity [vmlinux]: 872
idefloppy_release [vmlinux]: 408
idefloppy_open [vmlinux]: 408
where those two first ones are at the very top of the list of stack users
for me, it's now
ide_floppy_get_capacity [vmlinux]: 404
ide_floppy_ioctl [vmlinux]: 364
ie they are still high, but they are no longer at the top.
Borislav: Since ide_floppy_get_capacity is passed as a function pointer to other
parts of the kernel (e.g., block layer) we need that ide_atapi_pc to be created
on stack. Also, redid stack users numbers above. The two functions missing from
Linus' original 'make stackusage' output are due to ide being
rewritten/reorganized atm.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-floppy.c | 26 +++++++++---------
drivers/ide/ide-floppy_ioctl.c | 58 ++++++++++++++++++++-------------------
2 files changed, 43 insertions(+), 41 deletions(-)
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index aeb1ad7..1f07f38 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -342,38 +342,38 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
* Look at the flexible disk page parameters. We ignore the CHS capacity
* parameters and use the LBA parameters instead.
*/
-static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
+static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
+ struct ide_atapi_pc *pc)
{
struct ide_disk_obj *floppy = drive->driver_data;
struct gendisk *disk = floppy->disk;
- struct ide_atapi_pc pc;
u8 *page;
int capacity, lba_capacity;
u16 transfer_rate, sector_size, cyls, rpm;
u8 heads, sectors;
- ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
+ ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
- if (ide_queue_pc_tail(drive, disk, &pc)) {
+ if (ide_queue_pc_tail(drive, disk, pc)) {
printk(KERN_ERR PFX "Can't get flexible disk page params\n");
return 1;
}
- if (pc.buf[3] & 0x80)
+ if (pc->buf[3] & 0x80)
drive->dev_flags |= IDE_DFLAG_WP;
else
drive->dev_flags &= ~IDE_DFLAG_WP;
set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP));
- page = &pc.buf[8];
+ page = &pc->buf[8];
- transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]);
- sector_size = be16_to_cpup((__be16 *)&pc.buf[8 + 6]);
- cyls = be16_to_cpup((__be16 *)&pc.buf[8 + 8]);
- rpm = be16_to_cpup((__be16 *)&pc.buf[8 + 28]);
- heads = pc.buf[8 + 4];
- sectors = pc.buf[8 + 5];
+ transfer_rate = be16_to_cpup((__be16 *)&pc->buf[8 + 2]);
+ sector_size = be16_to_cpup((__be16 *)&pc->buf[8 + 6]);
+ cyls = be16_to_cpup((__be16 *)&pc->buf[8 + 8]);
+ rpm = be16_to_cpup((__be16 *)&pc->buf[8 + 28]);
+ heads = pc->buf[8 + 4];
+ sectors = pc->buf[8 + 5];
capacity = cyls * heads * sectors * sector_size;
@@ -499,7 +499,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
/* Clik! disk does not support get_flexible_disk_page */
if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
- (void) ide_floppy_get_flexible_disk_page(drive);
+ (void) ide_floppy_get_flexible_disk_page(drive, &pc);
return rc;
}
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index 2bc51ff..8f8be85 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -31,10 +31,11 @@
* On exit we set nformats to the number of records we've actually initialized.
*/
-static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
+static int ide_floppy_get_format_capacities(ide_drive_t *drive,
+ struct ide_atapi_pc *pc,
+ int __user *arg)
{
struct ide_disk_obj *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
u8 header_len, desc_cnt;
int i, blocks, length, u_array_size, u_index;
int __user *argp;
@@ -45,13 +46,13 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
if (u_array_size <= 0)
return -EINVAL;
- ide_floppy_create_read_capacity_cmd(&pc);
- if (ide_queue_pc_tail(drive, floppy->disk, &pc)) {
+ ide_floppy_create_read_capacity_cmd(pc);
+ if (ide_queue_pc_tail(drive, floppy->disk, pc)) {
printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
return -EIO;
}
- header_len = pc.buf[3];
+ header_len = pc->buf[3];
desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
u_index = 0;
@@ -68,8 +69,8 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
if (u_index >= u_array_size)
break; /* User-supplied buffer too small */
- blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
- length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
+ blocks = be32_to_cpup((__be32 *)&pc->buf[desc_start]);
+ length = be16_to_cpup((__be16 *)&pc->buf[desc_start + 6]);
if (put_user(blocks, argp))
return -EFAULT;
@@ -111,29 +112,28 @@ static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
pc->flags |= PC_FLAG_WRITING;
}
-static int ide_floppy_get_sfrp_bit(ide_drive_t *drive)
+static int ide_floppy_get_sfrp_bit(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
struct ide_disk_obj *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
drive->atapi_flags &= ~IDE_AFLAG_SRFP;
- ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE);
- pc.flags |= PC_FLAG_SUPPRESS_ERROR;
+ ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_CAPABILITIES_PAGE);
+ pc->flags |= PC_FLAG_SUPPRESS_ERROR;
- if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ if (ide_queue_pc_tail(drive, floppy->disk, pc))
return 1;
- if (pc.buf[8 + 2] & 0x40)
+ if (pc->buf[8 + 2] & 0x40)
drive->atapi_flags |= IDE_AFLAG_SRFP;
return 0;
}
-static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
+static int ide_floppy_format_unit(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ int __user *arg)
{
struct ide_disk_obj *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
int blocks, length, flags, err = 0;
if (floppy->openers > 1) {
@@ -166,10 +166,10 @@ static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
goto out;
}
- (void)ide_floppy_get_sfrp_bit(drive);
- ide_floppy_create_format_unit_cmd(&pc, blocks, length, flags);
+ ide_floppy_get_sfrp_bit(drive, pc);
+ ide_floppy_create_format_unit_cmd(pc, blocks, length, flags);
- if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ if (ide_queue_pc_tail(drive, floppy->disk, pc))
err = -EIO;
out:
@@ -188,15 +188,16 @@ out:
* the dsc bit, and return either 0 or 65536.
*/
-static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
+static int ide_floppy_get_format_progress(ide_drive_t *drive,
+ struct ide_atapi_pc *pc,
+ int __user *arg)
{
struct ide_disk_obj *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
int progress_indication = 0x10000;
if (drive->atapi_flags & IDE_AFLAG_SRFP) {
- ide_create_request_sense_cmd(drive, &pc);
- if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ ide_create_request_sense_cmd(drive, pc);
+ if (ide_queue_pc_tail(drive, floppy->disk, pc))
return -EIO;
if (floppy->sense_key == 2 &&
@@ -241,20 +242,21 @@ static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
return 0;
}
-static int ide_floppy_format_ioctl(ide_drive_t *drive, fmode_t mode,
- unsigned int cmd, void __user *argp)
+static int ide_floppy_format_ioctl(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ fmode_t mode, unsigned int cmd,
+ void __user *argp)
{
switch (cmd) {
case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
return 0;
case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
- return ide_floppy_get_format_capacities(drive, argp);
+ return ide_floppy_get_format_capacities(drive, pc, argp);
case IDEFLOPPY_IOCTL_FORMAT_START:
if (!(mode & FMODE_WRITE))
return -EPERM;
- return ide_floppy_format_unit(drive, (int __user *)argp);
+ return ide_floppy_format_unit(drive, pc, (int __user *)argp);
case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
- return ide_floppy_get_format_progress(drive, argp);
+ return ide_floppy_get_format_progress(drive, pc, argp);
default:
return -ENOTTY;
}
@@ -270,7 +272,7 @@ int ide_floppy_ioctl(ide_drive_t *drive, struct block_device *bdev,
if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
return ide_floppy_lockdoor(drive, &pc, arg, cmd);
- err = ide_floppy_format_ioctl(drive, mode, cmd, argp);
+ err = ide_floppy_format_ioctl(drive, &pc, mode, cmd, argp);
if (err != -ENOTTY)
return err;
--
1.6.0.4
next prev parent reply other threads:[~2008-11-20 5:41 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-20 5:41 [PATCH 00/03] ide misc leftovers Borislav Petkov
2008-11-20 5:41 ` Borislav Petkov
2008-11-20 5:41 ` [PATCH 1/3] ide-cd: move debug defines into header Borislav Petkov
2008-11-20 5:41 ` Borislav Petkov
2008-11-20 5:41 ` [PATCH 2/3] ide: make IDE_AFLAG_.. numbering continuous again Borislav Petkov
2008-11-20 5:41 ` Borislav Petkov
2008-11-20 5:41 ` Borislav Petkov [this message]
2008-11-20 5:41 ` [PATCH 3/3] ide-floppy: allocate only toplevel packet commands Borislav Petkov
2008-11-21 20:41 ` [PATCH 00/03] ide misc leftovers Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1227159683-2487-4-git-send-email-petkovbb@gmail.com \
--to=petkovbb@googlemail.com \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=petkovbb@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.