* [PATCH 1/2] OMAP: Add OMAP_LDP platform support.
2008-11-26 23:12 [PATCHv2 0/3] OMAP_LDP support in linux-git tree Tony Lindgren
@ 2008-11-27 15:34 ` Stanley.Miao
0 siblings, 0 replies; 3+ messages in thread
From: Stanley.Miao @ 2008-11-27 15:34 UTC (permalink / raw)
To: tony; +Cc: linux-omap
Add OMAP_LDP platform support.
Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
---
arch/arm/mach-omap2/board-ldp.c | 477 ++++++++++++++++++++++++++-
arch/arm/plat-omap/include/mach/board-ldp.h | 4 +
2 files changed, 479 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 1ea5998..7513bcd 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,11 +16,13 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -32,41 +34,512 @@
#include <mach/gpio.h>
#include <mach/board.h>
#include <mach/common.h>
+#include <mach/keypad.h>
#include <mach/gpmc.h>
+#include <mach/mmc.h>
+#include <mach/usb-musb.h>
#include <asm/io.h>
#include <asm/delay.h>
#include <mach/control.h>
+#include "mmc-twl4030.h"
+
+
+#define CONFIG_DISABLE_HFCLK 1
+
+#define ENABLE_VAUX1_DEDICATED 0x03
+#define ENABLE_VAUX1_DEV_GRP 0x20
+
+#define TWL4030_MSECURE_GPIO 22
+
+static struct resource ldp_smc911x_resources[] = {
+ [0] = {
+ .start = OMAP34XX_ETHR_START,
+ .end = OMAP34XX_ETHR_START + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct platform_device ldp_smc911x_device = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ldp_smc911x_resources),
+ .resource = ldp_smc911x_resources,
+};
+
+static int ldp_twl4030_keymap[] = {
+ KEY(0, 0, KEY_1),
+ KEY(1, 0, KEY_2),
+ KEY(2, 0, KEY_3),
+ KEY(0, 1, KEY_4),
+ KEY(1, 1, KEY_5),
+ KEY(2, 1, KEY_6),
+ KEY(3, 1, KEY_F5),
+ KEY(0, 2, KEY_7),
+ KEY(1, 2, KEY_8),
+ KEY(2, 2, KEY_9),
+ KEY(3, 2, KEY_F6),
+ KEY(0, 3, KEY_F7),
+ KEY(1, 3, KEY_0),
+ KEY(2, 3, KEY_F8),
+ PERSISTENT_KEY(4, 5),
+ KEY(4, 4, KEY_VOLUMEUP),
+ KEY(5, 5, KEY_VOLUMEDOWN),
+ 0
+};
+
+static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+ .rows = 6,
+ .cols = 6,
+ .keymap = ldp_twl4030_keymap,
+ .keymapsize = ARRAY_SIZE(ldp_twl4030_keymap),
+ .rep = 1,
+ .irq = TWL4030_MODIRQ_KEYPAD,
+};
+
+static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
+ [0] = {
+ .code = KEY_ENTER,
+ .gpio = 101,
+ .desc = "enter sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [1] = {
+ .code = KEY_F1,
+ .gpio = 102,
+ .desc = "func 1",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [2] = {
+ .code = KEY_F2,
+ .gpio = 103,
+ .desc = "func 2",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [3] = {
+ .code = KEY_F3,
+ .gpio = 104,
+ .desc = "func 3",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [4] = {
+ .code = KEY_F4,
+ .gpio = 105,
+ .desc = "func 4",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [5] = {
+ .code = KEY_LEFT,
+ .gpio = 106,
+ .desc = "left sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [6] = {
+ .code = KEY_RIGHT,
+ .gpio = 107,
+ .desc = "right sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [7] = {
+ .code = KEY_UP,
+ .gpio = 108,
+ .desc = "up sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [8] = {
+ .code = KEY_DOWN,
+ .gpio = 109,
+ .desc = "down sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+};
+
+static struct gpio_keys_platform_data ldp_gpio_keys = {
+ .buttons = ldp_gpio_keys_buttons,
+ .nbuttons = ARRAY_SIZE(ldp_gpio_keys_buttons),
+ .rep = 1,
+};
+
+static struct platform_device ldp_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &ldp_gpio_keys,
+ },
+};
+
+static int ts_gpio;
+
+static int __init msecure_init(void)
+{
+ int ret = 0;
+
+#ifdef CONFIG_RTC_DRV_TWL4030
+ /* 3430ES2.0 doesn't have msecure/gpio-22 line connected to T2 */
+ if (omap_type() == OMAP2_DEVICE_TYPE_GP &&
+ omap_rev() < OMAP3430_REV_ES2_0) {
+ void __iomem *msecure_pad_config_reg =
+ omap_ctrl_base_get() + 0xA3C;
+ int mux_mask = 0x04;
+ u16 tmp;
+
+ ret = gpio_request(TWL4030_MSECURE_GPIO, "msecure");
+ if (ret < 0) {
+ printk(KERN_ERR "msecure_init: can't"
+ "reserve GPIO:%d !\n", TWL4030_MSECURE_GPIO);
+ goto out;
+ }
+ /*
+ * TWL4030 will be in secure mode if msecure line from OMAP
+ * is low. Make msecure line high in order to change the
+ * TWL4030 RTC time and calender registers.
+ */
+
+ tmp = __raw_readw(msecure_pad_config_reg);
+ tmp &= 0xF8; /* To enable mux mode 03/04 = GPIO_RTC */
+ tmp |= mux_mask;/* To enable mux mode 03/04 = GPIO_RTC */
+ __raw_writew(tmp, msecure_pad_config_reg);
+
+ gpio_direction_output(TWL4030_MSECURE_GPIO, 1);
+ }
+out:
+#endif
+ return ret;
+}
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+ if (omap_request_gpio(ts_gpio) < 0) {
+ printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+ return;
+ }
+
+ gpio_direction_input(ts_gpio);
+
+ omap_set_gpio_debounce(ts_gpio, 1);
+ omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(ts_gpio);
+}
+
+/*
+ * This enable(1)/disable(0) the voltage for TS: uses twl4030 calls
+ */
+static int ads7846_vaux_control(int vaux_cntrl)
+{
+ int ret = 0;
+
+#ifdef CONFIG_TWL4030_CORE
+ /* check for return value of ldo_use: if success it returns 0 */
+ if (vaux_cntrl == VAUX_ENABLE) {
+ if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+ ENABLE_VAUX1_DEDICATED, TWL4030_VAUX1_DEDICATED))
+ return -EIO;
+ if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+ ENABLE_VAUX1_DEV_GRP, TWL4030_VAUX1_DEV_GRP))
+ return -EIO;
+ } else if (vaux_cntrl == VAUX_DISABLE) {
+ if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+ 0x00, TWL4030_VAUX1_DEDICATED))
+ return -EIO;
+ if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+ 0x00, TWL4030_VAUX1_DEV_GRP))
+ return -EIO;
+ }
+#else
+ ret = -EIO;
+#endif
+ return ret;
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+ .x_max = 0x0fff,
+ .y_max = 0x0fff,
+ .x_plate_ohms = 180,
+ .pressure_max = 255,
+ .debounce_max = 10,
+ .debounce_tol = 10,
+ .debounce_rep = 1,
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+ .vaux_control = ads7846_vaux_control,
+ .settle_delay_usecs = 150,
+};
+
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct spi_board_info ldp_spi_board_info[] __initdata = {
+ [0] = {
+ /*
+ * TSC2046 operates at a max freqency of 2MHz, so
+ * operate slightly below at 1.5MHz
+ */
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &tsc2046_mcspi_config,
+ .irq = 0,
+ .platform_data = &tsc2046_config,
+ },
+};
+
+static struct platform_device ldp_lcd_device = {
+ .name = "ldp_lcd",
+ .id = -1,
+};
+
+static struct platform_device *ldp_devices[] __initdata = {
+ &ldp_smc911x_device,
+ &ldp_lcd_device,
+ &ldp_gpio_keys_device,
+};
+
+static inline void __init ldp_init_smc911x(void)
+{
+ int eth_cs;
+ unsigned long cs_mem_base;
+ int eth_gpio = 0;
+
+ eth_cs = LDP_SMC911X_CS;
+
+ if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smc911x\n");
+ return;
+ }
+
+ ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
+ ldp_smc911x_resources[0].end = cs_mem_base + 0xf;
+ udelay(100);
+
+ eth_gpio = LDP_SMC911X_GPIO;
+
+ ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+
+ if (gpio_request(eth_gpio, "LAN IRQ line") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+ eth_gpio);
+ return;
+ }
+ gpio_direction_input(eth_gpio);
+}
+
+
static void __init omap_ldp_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
+ ldp_init_smc911x();
}
static struct omap_uart_config ldp_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct omap_lcd_config ldp_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
static struct omap_board_config_kernel ldp_config[] __initdata = {
{ OMAP_TAG_UART, &ldp_uart_config },
+ { OMAP_TAG_LCD, &ldp_lcd_config },
+};
+
+static int ldp_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
+8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
+5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
+4040, 3910, 3790, 3670, 3550
+};
+
+static struct twl4030_ins __initdata sleep_on_seq[] = {
+/*
+ * Turn off VDD1 and VDD2.
+ */
+ {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2},
+#ifdef CONFIG_DISABLE_HFCLK
+/*
+ * And also turn off the OMAP3 PLLs and the sysclk output.
+ */
+ {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_OFF), 3},
+#endif
+};
+
+static struct twl4030_script sleep_on_script __initdata = {
+ .script = sleep_on_seq,
+ .size = ARRAY_SIZE(sleep_on_seq),
+ .flags = TRITON_SLEEP_SCRIPT,
+};
+
+static struct twl4030_ins wakeup_seq[] __initdata = {
+#ifndef CONFIG_DISABLE_HFCLK
+/*
+ * Wakeup VDD1 and VDD2.
+ */
+ {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 4},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 2},
+#else
+/*
+ * Reenable the OMAP3 PLLs.
+ * Wakeup VDD1 and VDD2.
+ * Reenable sysclk output.
+ */
+ {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30},
+ {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3},
+#endif /* #ifndef CONFIG_DISABLE_HFCLK */
+};
+
+static struct twl4030_script wakeup_script __initdata = {
+ .script = wakeup_seq,
+ .size = ARRAY_SIZE(wakeup_seq),
+ .flags = TRITON_WAKEUP12_SCRIPT | TRITON_WAKEUP3_SCRIPT,
+};
+
+static struct twl4030_ins wrst_seq[] __initdata = {
+/*
+ * Reset twl4030.
+ * Reset VDD1 regulator.
+ * Reset VDD2 regulator.
+ * Reset VPLL1 regulator.
+ * Enable sysclk output.
+ * Reenable twl4030.
+ */
+ {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_OFF), 2},
+ {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_WRST), 15},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_WRST), 15},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_WRST), 0x60},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 2},
+ {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script wrst_script __initdata = {
+ .script = wrst_seq,
+ .size = ARRAY_SIZE(wakeup_seq),
+ .flags = TRITON_WRST_SCRIPT,
+};
+
+static struct twl4030_script *twl4030_scripts[] __initdata = {
+ &sleep_on_script,
+ &wakeup_script,
+ &wrst_script,
+};
+
+static struct twl4030_power_data sdp3430_t2scripts_data __initdata = {
+ .scripts = twl4030_scripts,
+ .size = ARRAY_SIZE(twl4030_scripts),
+};
+
+static struct twl4030_bci_platform_data ldp_bci_data = {
+ .battery_tmp_tbl = ldp_batt_table,
+ .tblsize = ARRAY_SIZE(ldp_batt_table),
+};
+
+static struct twl4030_usb_data ldp_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_gpio_platform_data ldp_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+};
+
+static struct twl4030_madc_platform_data ldp_madc_data = {
+ .irq_line = 1,
+};
+
+static struct twl4030_platform_data ldp_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .bci = &ldp_bci_data,
+ .madc = &ldp_madc_data,
+ .usb = &ldp_usb_data,
+ .power = &sdp3430_t2scripts_data,
+ .gpio = &ldp_gpio_data,
+ .keypad = &ldp_kp_twl4030_data,
+};
+
+static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &ldp_twldata,
+ },
};
static int __init omap_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, NULL, 0);
+ omap_register_i2c_bus(1, 2600, ldp_i2c_boardinfo,
+ ARRAY_SIZE(ldp_i2c_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
}
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {} /* Terminator */
+};
+
static void __init omap_ldp_init(void)
{
omap_i2c_init();
+ platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
omap_board_config = ldp_config;
omap_board_config_size = ARRAY_SIZE(ldp_config);
+ ts_gpio = 54;
+ ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+ spi_register_board_info(ldp_spi_board_info,
+ ARRAY_SIZE(ldp_spi_board_info));
+ msecure_init();
+ ads7846_dev_init();
omap_serial_init();
+ usb_musb_init();
+ hsmmc_init(mmc);
}
static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h
index 66e2746..c5d15bb 100644
--- a/arch/arm/plat-omap/include/mach/board-ldp.h
+++ b/arch/arm/plat-omap/include/mach/board-ldp.h
@@ -33,4 +33,8 @@ extern void twl4030_bci_battery_init(void);
#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ
+#define LDP_SMC911X_CS 1
+#define LDP_SMC911X_GPIO 152
+#define DEBUG_BASE 0x08000000
+#define OMAP34XX_ETHR_START DEBUG_BASE
#endif /* __ASM_ARCH_OMAP_LDP_H */
--
1.5.6.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 1/2] OMAP: Add OMAP_LDP platform support.
@ 2008-12-04 9:44 Sam Duan
2008-12-04 11:28 ` stanley.miao
0 siblings, 1 reply; 3+ messages in thread
From: Sam Duan @ 2008-12-04 9:44 UTC (permalink / raw)
To: linux-omap; +Cc: 'Stanley.Miao'
Hi Stanley,
I git clone the
tree(http://www.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.gi
t)
and configured the kernel with omap_ldp_defconfig but met some compile
errors.
It seems like the line "gpio_direction_input(eth_gpio) " was not patched in.
It's "omap_set_gpio_direction(eth_gpio, 1)" at Line343 in
arch/arm/mach-omap2/board-ldp.c which caused an error "implicit
declaration";
I replaced omap_set_gpio_direction(eth_gpio, 1) with
gpio_direction_input(eth_gpio) but the same error appeared with
drivers/video/omap/lcd_ldp.c for "omap_set_gpio_direction" and
"omap_set_gpio_dataout".
Did I miss some other patches? Are there any patchs can make the kernel
compiled with omap_ldp_defconfig?
Thanks
Sam
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 1/2] OMAP: Add OMAP_LDP platform support.
2008-12-04 9:44 [PATCH 1/2] OMAP: Add OMAP_LDP platform support Sam Duan
@ 2008-12-04 11:28 ` stanley.miao
0 siblings, 0 replies; 3+ messages in thread
From: stanley.miao @ 2008-12-04 11:28 UTC (permalink / raw)
To: Sam Duan; +Cc: linux-omap
The first patch(PATCHv2 1/3) in this thread have fixed this problem. It
has not been pushed in.
Stanley.
On Thu, 2008-12-04 at 17:44 +0800, Sam Duan wrote:
> Hi Stanley,
>
> I git clone the
> tree(http://www.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.gi
> t)
> and configured the kernel with omap_ldp_defconfig but met some compile
> errors.
> It seems like the line "gpio_direction_input(eth_gpio) " was not patched in.
> It's "omap_set_gpio_direction(eth_gpio, 1)" at Line343 in
> arch/arm/mach-omap2/board-ldp.c which caused an error "implicit
> declaration";
> I replaced omap_set_gpio_direction(eth_gpio, 1) with
> gpio_direction_input(eth_gpio) but the same error appeared with
> drivers/video/omap/lcd_ldp.c for "omap_set_gpio_direction" and
> "omap_set_gpio_dataout".
>
> Did I miss some other patches? Are there any patchs can make the kernel
> compiled with omap_ldp_defconfig?
> Thanks
> Sam
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-12-04 11:21 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-12-04 9:44 [PATCH 1/2] OMAP: Add OMAP_LDP platform support Sam Duan
2008-12-04 11:28 ` stanley.miao
-- strict thread matches above, loose matches on Subject: below --
2008-11-26 23:12 [PATCHv2 0/3] OMAP_LDP support in linux-git tree Tony Lindgren
2008-11-27 15:34 ` [PATCH 1/2] OMAP: Add OMAP_LDP platform support Stanley.Miao
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.