From: Dan Williams <dcbw@redhat.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 2/7] airo: re-arrange WPA capability checks
Date: Tue, 20 Jan 2009 10:04:30 -0500 [thread overview]
Message-ID: <1232463870.22158.9.camel@localhost.localdomain> (raw)
In-Reply-To: <1232462691.22158.6.camel@localhost.localdomain>
The capability register has to be read for other (upcoming) stuff, so fold
the WPA test function back into _init_airo_card() and move the netdevice
registration stuff above it so that the netdevice has a name by the time
the card's capabilities are printed out.
Signed-off-by: Dan Williams <dcbw@redhat.com>
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index aa81f2e..76f1364 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2734,28 +2734,6 @@ static void airo_networks_initialize(struct airo_info *ai)
&ai->network_free_list);
}
-static int airo_test_wpa_capable(struct airo_info *ai)
-{
- int status;
- CapabilityRid cap_rid;
-
- status = readCapabilityRid(ai, &cap_rid, 1);
- if (status != SUCCESS) return 0;
-
- /* Only firmware versions 5.30.17 or better can do WPA */
- if (le16_to_cpu(cap_rid.softVer) > 0x530
- || (le16_to_cpu(cap_rid.softVer) == 0x530
- && le16_to_cpu(cap_rid.softSubVer) >= 17)) {
- airo_print_info("", "WPA is supported.");
- return 1;
- }
-
- /* No WPA support */
- airo_print_info("", "WPA unsupported (only firmware versions 5.30.17"
- " and greater support WPA. Detected %s)", cap_rid.prodVer);
- return 0;
-}
-
static struct net_device *_init_airo_card( unsigned short irq, int port,
int is_pcmcia, struct pci_dev *pci,
struct device *dmdev )
@@ -2763,6 +2741,7 @@ static struct net_device *_init_airo_card( unsigned short irq, int port,
struct net_device *dev;
struct airo_info *ai;
int i, rc;
+ CapabilityRid cap_rid;
DECLARE_MAC_BUF(mac);
/* Create the network device object. */
@@ -2833,7 +2812,7 @@ static struct net_device *_init_airo_card( unsigned short irq, int port,
}
if (probe) {
- if ( setup_card( ai, dev->dev_addr, 1 ) != SUCCESS ) {
+ if (setup_card(ai, dev->dev_addr, 1) != SUCCESS) {
airo_print_err(dev->name, "MAC could not be enabled" );
rc = -EIO;
goto err_out_map;
@@ -2843,28 +2822,47 @@ static struct net_device *_init_airo_card( unsigned short irq, int port,
set_bit(FLAG_FLASHING, &ai->flags);
}
+ strcpy(dev->name, "eth%d");
+ rc = register_netdev(dev);
+ if (rc) {
+ airo_print_err(dev->name, "Couldn't register_netdev");
+ goto err_out_map;
+ }
+ ai->wifidev = init_wifidev(ai, dev);
+ if (!ai->wifidev)
+ goto err_out_reg;
+
+ rc = readCapabilityRid(ai, &cap_rid, 1);
+ if (rc != SUCCESS) {
+ rc = -EIO;
+ goto err_out_wifi;
+ }
+
+ airo_print_info(dev->name, "Firmware version %x.%x.%02x",
+ ((le16_to_cpu(cap_rid.softVer) >> 8) & 0xF),
+ (le16_to_cpu(cap_rid.softVer) & 0xFF),
+ le16_to_cpu(cap_rid.softSubVer));
+
/* Test for WPA support */
- if (airo_test_wpa_capable(ai)) {
+ /* Only firmware versions 5.30.17 or better can do WPA */
+ if (le16_to_cpu(cap_rid.softVer) > 0x530
+ || (le16_to_cpu(cap_rid.softVer) == 0x530
+ && le16_to_cpu(cap_rid.softSubVer) >= 17)) {
+ airo_print_info(ai->dev->name, "WPA supported.");
+
set_bit(FLAG_WPA_CAPABLE, &ai->flags);
ai->bssListFirst = RID_WPA_BSSLISTFIRST;
ai->bssListNext = RID_WPA_BSSLISTNEXT;
ai->bssListRidLen = sizeof(BSSListRid);
} else {
+ airo_print_info(ai->dev->name, "WPA unsupported with firmware "
+ "versions older than 5.30.17.");
+
ai->bssListFirst = RID_BSSLISTFIRST;
ai->bssListNext = RID_BSSLISTNEXT;
ai->bssListRidLen = sizeof(BSSListRid) - sizeof(BSSListRidExtra);
}
- strcpy(dev->name, "eth%d");
- rc = register_netdev(dev);
- if (rc) {
- airo_print_err(dev->name, "Couldn't register_netdev");
- goto err_out_map;
- }
- ai->wifidev = init_wifidev(ai, dev);
- if (!ai->wifidev)
- goto err_out_reg;
-
set_bit(FLAG_REGISTERED,&ai->flags);
airo_print_info(dev->name, "MAC enabled %s",
print_mac(mac, dev->dev_addr));
next prev parent reply other threads:[~2009-01-20 15:05 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-20 14:44 [PATCH 0/7] airo: cleanups and simplifications Dan Williams
2009-01-20 15:03 ` [PATCH 1/7] airo: clean up and clarify interrupt-time task handling Dan Williams
2009-01-20 15:04 ` Dan Williams [this message]
2009-01-20 15:05 ` [PATCH 3/7] airo: simplify WEP index and capability checks Dan Williams
2009-01-20 15:06 ` [PATCH 4/7] airo: split up WEP key operations Dan Williams
2009-01-22 18:53 ` [PATCH 4/7 v2] " Dan Williams
2009-01-20 15:08 ` [PATCH 5/7] airo: use __attribute__ ((packed)) not #pragma pack(1) Dan Williams
2009-01-20 15:09 ` [PATCH 6/7] airo: clean up and clarify micinit() Dan Williams
2009-01-20 15:11 ` [PATCH 7/7] airo: remove useless #defines Dan Williams
2009-01-20 22:12 ` [PATCH 0/7] airo: cleanups and simplifications John W. Linville
2009-01-23 19:40 ` John W. Linville
2009-01-23 19:59 ` Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1232463870.22158.9.camel@localhost.localdomain \
--to=dcbw@redhat.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.