From: Dan Williams <dcbw@redhat.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 5/7] airo: use __attribute__ ((packed)) not #pragma pack(1)
Date: Tue, 20 Jan 2009 10:08:29 -0500 [thread overview]
Message-ID: <1232464109.22158.16.camel@localhost.localdomain> (raw)
In-Reply-To: <1232462691.22158.6.camel@localhost.localdomain>
We'll get rid of the typedefs a bit later, but for now minimize the diff.
Signed-off-by: Dan Williams <dcbw@redhat.com>
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index d483491..8fa8585 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -496,39 +496,41 @@ typedef struct {
* so all rid access should use the read/writeXXXRid routines.
*/
-/* This is redundant for x86 archs, but it seems necessary for ARM */
-#pragma pack(1)
-
/* This structure came from an email sent to me from an engineer at
aironet for inclusion into this driver */
-typedef struct {
+typedef struct WepKeyRid WepKeyRid;
+struct WepKeyRid {
__le16 len;
__le16 kindex;
u8 mac[ETH_ALEN];
__le16 klen;
u8 key[16];
-} WepKeyRid;
+} __attribute__ ((packed));
/* These structures are from the Aironet's PC4500 Developers Manual */
-typedef struct {
+typedef struct Ssid Ssid;
+struct Ssid {
__le16 len;
u8 ssid[32];
-} Ssid;
+} __attribute__ ((packed));
-typedef struct {
+typedef struct SsidRid SsidRid;
+struct SsidRid {
__le16 len;
Ssid ssids[3];
-} SsidRid;
+} __attribute__ ((packed));
-typedef struct {
+typedef struct ModulationRid ModulationRid;
+struct ModulationRid {
__le16 len;
__le16 modulation;
#define MOD_DEFAULT cpu_to_le16(0)
#define MOD_CCK cpu_to_le16(1)
#define MOD_MOK cpu_to_le16(2)
-} ModulationRid;
+} __attribute__ ((packed));
-typedef struct {
+typedef struct ConfigRid ConfigRid;
+struct ConfigRid {
__le16 len; /* sizeof(ConfigRid) */
__le16 opmode; /* operating mode */
#define MODE_STA_IBSS cpu_to_le16(0)
@@ -649,9 +651,10 @@ typedef struct {
#define MAGIC_STAY_IN_CAM (1<<10)
u8 magicControl;
__le16 autoWake;
-} ConfigRid;
+} __attribute__ ((packed));
-typedef struct {
+typedef struct StatusRid StatusRid;
+struct StatusRid {
__le16 len;
u8 mac[ETH_ALEN];
__le16 mode;
@@ -707,21 +710,23 @@ typedef struct {
#define STAT_LEAPFAILED 91
#define STAT_LEAPTIMEDOUT 92
#define STAT_LEAPCOMPLETE 93
-} StatusRid;
+} __attribute__ ((packed));
-typedef struct {
+typedef struct StatsRid StatsRid;
+struct StatsRid {
__le16 len;
__le16 spacer;
__le32 vals[100];
-} StatsRid;
-
+} __attribute__ ((packed));
-typedef struct {
+typedef struct APListRid APListRid;
+struct APListRid {
__le16 len;
u8 ap[4][ETH_ALEN];
-} APListRid;
+} __attribute__ ((packed));
-typedef struct {
+typedef struct CapabilityRid CapabilityRid;
+struct CapabilityRid {
__le16 len;
char oui[3];
char zero;
@@ -748,17 +753,18 @@ typedef struct {
__le16 bootBlockVer;
__le16 requiredHard;
__le16 extSoftCap;
-} CapabilityRid;
-
+} __attribute__ ((packed));
/* Only present on firmware >= 5.30.17 */
-typedef struct {
+typedef struct BSSListRidExtra BSSListRidExtra;
+struct BSSListRidExtra {
__le16 unknown[4];
u8 fixed[12]; /* WLAN management frame */
u8 iep[624];
-} BSSListRidExtra;
+} __attribute__ ((packed));
-typedef struct {
+typedef struct BSSListRid BSSListRid;
+struct BSSListRid {
__le16 len;
__le16 index; /* First is 0 and 0xffff means end of list */
#define RADIO_FH 1 /* Frequency hopping radio type */
@@ -789,33 +795,37 @@ typedef struct {
/* Only present on firmware >= 5.30.17 */
BSSListRidExtra extra;
-} BSSListRid;
+} __attribute__ ((packed));
typedef struct {
BSSListRid bss;
struct list_head list;
} BSSListElement;
-typedef struct {
+typedef struct tdsRssiEntry tdsRssiEntry;
+struct tdsRssiEntry {
u8 rssipct;
u8 rssidBm;
-} tdsRssiEntry;
+} __attribute__ ((packed));
-typedef struct {
+typedef struct tdsRssiRid tdsRssiRid;
+struct tdsRssiRid {
u16 len;
tdsRssiEntry x[256];
-} tdsRssiRid;
+} __attribute__ ((packed));
-typedef struct {
- u16 len;
- u16 state;
- u16 multicastValid;
+typedef struct MICRid MICRid;
+struct MICRid {
+ __le16 len;
+ __le16 state;
+ __le16 multicastValid;
u8 multicast[16];
- u16 unicastValid;
+ __le16 unicastValid;
u8 unicast[16];
-} MICRid;
+} __attribute__ ((packed));
-typedef struct {
+typedef struct MICBuffer MICBuffer;
+struct MICBuffer {
__be16 typelen;
union {
@@ -830,15 +840,13 @@ typedef struct {
} u;
__be32 mic;
__be32 seq;
-} MICBuffer;
+} __attribute__ ((packed));
typedef struct {
u8 da[ETH_ALEN];
u8 sa[ETH_ALEN];
} etherHead;
-#pragma pack()
-
#define TXCTL_TXOK (1<<1) /* report if tx is ok */
#define TXCTL_TXEX (1<<2) /* report if tx fails */
#define TXCTL_802_3 (0<<3) /* 802.3 packet */
next prev parent reply other threads:[~2009-01-20 15:09 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-20 14:44 [PATCH 0/7] airo: cleanups and simplifications Dan Williams
2009-01-20 15:03 ` [PATCH 1/7] airo: clean up and clarify interrupt-time task handling Dan Williams
2009-01-20 15:04 ` [PATCH 2/7] airo: re-arrange WPA capability checks Dan Williams
2009-01-20 15:05 ` [PATCH 3/7] airo: simplify WEP index and " Dan Williams
2009-01-20 15:06 ` [PATCH 4/7] airo: split up WEP key operations Dan Williams
2009-01-22 18:53 ` [PATCH 4/7 v2] " Dan Williams
2009-01-20 15:08 ` Dan Williams [this message]
2009-01-20 15:09 ` [PATCH 6/7] airo: clean up and clarify micinit() Dan Williams
2009-01-20 15:11 ` [PATCH 7/7] airo: remove useless #defines Dan Williams
2009-01-20 22:12 ` [PATCH 0/7] airo: cleanups and simplifications John W. Linville
2009-01-23 19:40 ` John W. Linville
2009-01-23 19:59 ` Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1232464109.22158.16.camel@localhost.localdomain \
--to=dcbw@redhat.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.