From: Borislav Petkov <petkovbb@googlemail.com>
To: bzolnier@gmail.com
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org,
Borislav Petkov <petkovbb@gmail.com>
Subject: [PATCH 08/10] ide-eh: use flags query macros
Date: Sun, 15 Feb 2009 13:08:10 +0100 [thread overview]
Message-ID: <1234699692-9452-9-git-send-email-petkovbb@gmail.com> (raw)
In-Reply-To: <1234699692-9452-1-git-send-email-petkovbb@gmail.com>
while at it, change compound if-statement in ide_disk_pre_reset() with a
logically equivalent and a bit more readable one.
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-eh.c | 17 ++++++++---------
1 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c
index 1166497..d0fd449 100644
--- a/drivers/ide/ide-eh.c
+++ b/drivers/ide/ide-eh.c
@@ -9,13 +9,13 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq,
ide_hwif_t *hwif = drive->hwif;
if ((stat & ATA_BUSY) ||
- ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
+ ((stat & ATA_DF) && !ide_drv_ignore_write_err(drive))) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else if (stat & ATA_ERR) {
/* err has different meaning on cdrom and tape */
if (err == ATA_ABORTED) {
- if ((drive->dev_flags & IDE_DFLAG_LBA) &&
+ if (ide_drv_does_lba(drive) &&
/* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */
hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS)
return ide_stopped;
@@ -65,7 +65,7 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq,
ide_hwif_t *hwif = drive->hwif;
if ((stat & ATA_BUSY) ||
- ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
+ ((stat & ATA_DF) && !ide_drv_ignore_write_err(drive))) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else {
@@ -274,8 +274,7 @@ static void ide_disk_pre_reset(ide_drive_t *drive)
drive->mult_count = 0;
drive->dev_flags &= ~IDE_DFLAG_PARKED;
- if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 &&
- (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0)
+ if (!(ide_drv_keep_settings(drive) || ide_drv_using_dma(drive)))
drive->mult_req = 0;
if (drive->mult_req != drive->mult_count)
@@ -291,15 +290,15 @@ static void pre_reset(ide_drive_t *drive)
else
drive->dev_flags |= IDE_DFLAG_POST_RESET;
- if (drive->dev_flags & IDE_DFLAG_USING_DMA) {
+ if (ide_drv_using_dma(drive)) {
if (drive->crc_count)
ide_check_dma_crc(drive);
else
ide_dma_off(drive);
}
- if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) {
- if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) {
+ if (!ide_drv_keep_settings(drive)) {
+ if (!ide_drv_using_dma(drive)) {
drive->dev_flags &= ~IDE_DFLAG_UNMASK;
drive->io_32bit = 0;
}
@@ -366,7 +365,7 @@ static ide_startstop_t do_reset1(ide_drive_t *drive, int do_not_try_atapi)
prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE);
timeout = jiffies;
ide_port_for_each_present_dev(i, tdrive, hwif) {
- if ((tdrive->dev_flags & IDE_DFLAG_PARKED) &&
+ if (ide_drv_heads_parked(tdrive) &&
time_after(tdrive->sleep, timeout))
timeout = tdrive->sleep;
}
--
1.6.0.4
WARNING: multiple messages have this Message-ID (diff)
From: Borislav Petkov <petkovbb@googlemail.com>
To: <bzolnier@gmail.com>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org,
Borislav Petkov <petkovbb@gmail.com>
Subject: [PATCH 08/10] ide-eh: use flags query macros
Date: Sun, 15 Feb 2009 13:08:10 +0100 [thread overview]
Message-ID: <1234699692-9452-9-git-send-email-petkovbb@gmail.com> (raw)
In-Reply-To: <1234699692-9452-1-git-send-email-petkovbb@gmail.com>
while at it, change compound if-statement in ide_disk_pre_reset() with a
logically equivalent and a bit more readable one.
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-eh.c | 17 ++++++++---------
1 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c
index 1166497..d0fd449 100644
--- a/drivers/ide/ide-eh.c
+++ b/drivers/ide/ide-eh.c
@@ -9,13 +9,13 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq,
ide_hwif_t *hwif = drive->hwif;
if ((stat & ATA_BUSY) ||
- ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
+ ((stat & ATA_DF) && !ide_drv_ignore_write_err(drive))) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else if (stat & ATA_ERR) {
/* err has different meaning on cdrom and tape */
if (err == ATA_ABORTED) {
- if ((drive->dev_flags & IDE_DFLAG_LBA) &&
+ if (ide_drv_does_lba(drive) &&
/* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */
hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS)
return ide_stopped;
@@ -65,7 +65,7 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq,
ide_hwif_t *hwif = drive->hwif;
if ((stat & ATA_BUSY) ||
- ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
+ ((stat & ATA_DF) && !ide_drv_ignore_write_err(drive))) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else {
@@ -274,8 +274,7 @@ static void ide_disk_pre_reset(ide_drive_t *drive)
drive->mult_count = 0;
drive->dev_flags &= ~IDE_DFLAG_PARKED;
- if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 &&
- (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0)
+ if (!(ide_drv_keep_settings(drive) || ide_drv_using_dma(drive)))
drive->mult_req = 0;
if (drive->mult_req != drive->mult_count)
@@ -291,15 +290,15 @@ static void pre_reset(ide_drive_t *drive)
else
drive->dev_flags |= IDE_DFLAG_POST_RESET;
- if (drive->dev_flags & IDE_DFLAG_USING_DMA) {
+ if (ide_drv_using_dma(drive)) {
if (drive->crc_count)
ide_check_dma_crc(drive);
else
ide_dma_off(drive);
}
- if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) {
- if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) {
+ if (!ide_drv_keep_settings(drive)) {
+ if (!ide_drv_using_dma(drive)) {
drive->dev_flags &= ~IDE_DFLAG_UNMASK;
drive->io_32bit = 0;
}
@@ -366,7 +365,7 @@ static ide_startstop_t do_reset1(ide_drive_t *drive, int do_not_try_atapi)
prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE);
timeout = jiffies;
ide_port_for_each_present_dev(i, tdrive, hwif) {
- if ((tdrive->dev_flags & IDE_DFLAG_PARKED) &&
+ if (ide_drv_heads_parked(tdrive) &&
time_after(tdrive->sleep, timeout))
timeout = tdrive->sleep;
}
--
1.6.0.4
next prev parent reply other threads:[~2009-02-15 12:08 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-15 12:08 [PATCH 0/10] ide: flags query macros Borislav Petkov
2009-02-15 12:08 ` Borislav Petkov
2009-02-15 12:08 ` [PATCH 01/10] ide: add " Borislav Petkov
2009-02-15 12:08 ` Borislav Petkov
2009-02-15 13:35 ` Sam Ravnborg
2009-02-15 18:01 ` Borislav Petkov
2009-02-15 20:51 ` Sam Ravnborg
2009-02-16 21:07 ` Bartlomiej Zolnierkiewicz
2009-02-15 12:08 ` [PATCH 02/10] ide-cd: use " Borislav Petkov
2009-02-15 12:08 ` Borislav Petkov
2009-02-15 12:08 ` [PATCH 03/10] ide-floppy: " Borislav Petkov
2009-02-15 12:08 ` Borislav Petkov
2009-02-15 12:08 ` [PATCH 04/10] ide-tape: " Borislav Petkov
2009-02-15 12:08 ` Borislav Petkov
2009-02-15 12:08 ` [PATCH 05/10] ide-atapi: " Borislav Petkov
2009-02-15 12:08 ` Borislav Petkov
2009-02-15 12:08 ` [PATCH 06/10] ide-disk: " Borislav Petkov
2009-02-15 12:08 ` Borislav Petkov
2009-02-15 12:08 ` [PATCH 07/10] ide-devsets: " Borislav Petkov
2009-02-15 12:08 ` Borislav Petkov
2009-02-15 12:08 ` Borislav Petkov [this message]
2009-02-15 12:08 ` [PATCH 08/10] ide-eh: " Borislav Petkov
2009-02-15 12:08 ` [PATCH 09/10] ide-probe: " Borislav Petkov
2009-02-15 12:08 ` Borislav Petkov
2009-02-15 12:08 ` [PATCH 10/10] ide: use flags query macros in the remaining ide code Borislav Petkov
2009-02-15 12:08 ` Borislav Petkov
2009-02-16 22:17 ` [PATCH 0/10] ide: flags query macros Bartlomiej Zolnierkiewicz
2009-02-17 14:33 ` Bartlomiej Zolnierkiewicz
2009-02-23 7:04 ` Borislav Petkov
2009-02-23 7:34 ` Sam Ravnborg
2009-02-23 8:25 ` Borislav Petkov
2009-02-26 21:35 ` Bartlomiej Zolnierkiewicz
2009-02-27 6:38 ` Borislav Petkov
2009-02-27 8:21 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1234699692-9452-9-git-send-email-petkovbb@gmail.com \
--to=petkovbb@googlemail.com \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=petkovbb@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.