All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Hutchings <bhutchings@solarflare.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, linux-net-drivers@solarflare.com
Subject: [PATCH 8/9] sfc: Clean up LED control
Date: Fri, 27 Feb 2009 23:08:03 +0000	[thread overview]
Message-ID: <1235776083.3164.28.camel@achroite> (raw)
In-Reply-To: <1235775847.3164.6.camel@achroite>

Reinitialise LEDs after overriding them for identification.

Rename set_fault_led method to set_id_led since we always use it for
NIC identification and not faults.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
 drivers/net/sfc/boards.c     |   11 +++++------
 drivers/net/sfc/efx.c        |    4 ++--
 drivers/net/sfc/net_driver.h |    8 ++++----
 3 files changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c
index 1260875..b709878 100644
--- a/drivers/net/sfc/boards.c
+++ b/drivers/net/sfc/boards.c
@@ -26,7 +26,7 @@ static void blink_led_timer(unsigned long context)
 {
 	struct efx_nic *efx = (struct efx_nic *)context;
 	struct efx_blinker *bl = &efx->board_info.blinker;
-	efx->board_info.set_fault_led(efx, bl->state);
+	efx->board_info.set_id_led(efx, bl->state);
 	bl->state = !bl->state;
 	if (bl->resubmit)
 		mod_timer(&bl->timer, jiffies + BLINK_INTERVAL);
@@ -48,7 +48,7 @@ static void board_blink(struct efx_nic *efx, bool blink)
 		blinker->resubmit = false;
 		if (blinker->timer.function)
 			del_timer_sync(&blinker->timer);
-		efx->board_info.set_fault_led(efx, false);
+		efx->board_info.init_leds(efx);
 	}
 }
 
@@ -185,7 +185,7 @@ static struct i2c_board_info sfe4002_hwmon_info = {
 #define SFE4002_RX_LED    (0)	/* Green */
 #define SFE4002_TX_LED    (1)	/* Amber */
 
-static int sfe4002_init_leds(struct efx_nic *efx)
+static void sfe4002_init_leds(struct efx_nic *efx)
 {
 	/* Set the TX and RX LEDs to reflect status and activity, and the
 	 * fault LED off */
@@ -194,10 +194,9 @@ static int sfe4002_init_leds(struct efx_nic *efx)
 	xfp_set_led(efx, SFE4002_RX_LED,
 		    QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT);
 	xfp_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF);
-	return 0;
 }
 
-static void sfe4002_fault_led(struct efx_nic *efx, bool state)
+static void sfe4002_set_id_led(struct efx_nic *efx, bool state)
 {
 	xfp_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON :
 			QUAKE_LED_OFF);
@@ -221,7 +220,7 @@ static int sfe4002_init(struct efx_nic *efx)
 		return rc;
 	efx->board_info.monitor = sfe4002_check_hw;
 	efx->board_info.init_leds = sfe4002_init_leds;
-	efx->board_info.set_fault_led = sfe4002_fault_led;
+	efx->board_info.set_id_led = sfe4002_set_id_led;
 	efx->board_info.blink = board_blink;
 	efx->board_info.fini = efx_fini_lm87;
 	return 0;
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 7583659..45df110 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -1848,8 +1848,8 @@ static struct efx_phy_operations efx_dummy_phy_operations = {
 
 static struct efx_board efx_dummy_board_info = {
 	.init		= efx_port_dummy_op_int,
-	.init_leds	= efx_port_dummy_op_int,
-	.set_fault_led	= efx_port_dummy_op_blink,
+	.init_leds	= efx_port_dummy_op_void,
+	.set_id_led	= efx_port_dummy_op_blink,
 	.monitor	= efx_port_dummy_op_int,
 	.blink		= efx_port_dummy_op_blink,
 	.fini		= efx_port_dummy_op_void,
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index ebc7b63..b81fc72 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -402,8 +402,8 @@ struct efx_blinker {
  * @major: Major rev. ('A', 'B' ...)
  * @minor: Minor rev. (0, 1, ...)
  * @init: Initialisation function
- * @init_leds: Sets up board LEDs
- * @set_fault_led: Turns the fault LED on or off
+ * @init_leds: Sets up board LEDs. May be called repeatedly.
+ * @set_id_led: Turns the identification LED on or off
  * @blink: Starts/stops blinking
  * @monitor: Board-specific health check function
  * @fini: Cleanup function
@@ -419,9 +419,9 @@ struct efx_board {
 	/* As the LEDs are typically attached to the PHY, LEDs
 	 * have a separate init callback that happens later than
 	 * board init. */
-	int (*init_leds)(struct efx_nic *efx);
+	void (*init_leds)(struct efx_nic *efx);
+	void (*set_id_led) (struct efx_nic *efx, bool state);
 	int (*monitor) (struct efx_nic *nic);
-	void (*set_fault_led) (struct efx_nic *efx, bool state);
 	void (*blink) (struct efx_nic *efx, bool start);
 	void (*fini) (struct efx_nic *nic);
 	struct efx_blinker blinker;

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.


  parent reply	other threads:[~2009-02-27 23:08 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-27 23:04 [PATCH 1/9] sfc: SFT9001: Include non-breaking cable diagnostics in online self-tests Ben Hutchings
2009-02-27 23:06 ` [PATCH 2/9] sfc: Fix test for MDIO read failure Ben Hutchings
2009-03-02 11:26   ` David Miller
2009-02-27 23:06 ` [PATCH 3/9] sfc: SFT9001/SFN4111T: Check PHY boot status during board initialisation Ben Hutchings
2009-03-02 11:26   ` David Miller
2009-02-27 23:06 ` [PATCH 4/9] sfc: Remove "XFP" from log messages that are not specific to XFP Ben Hutchings
2009-03-02 11:26   ` David Miller
2009-02-27 23:07 ` [PATCH 5/9] sfc: Fix reporting of PHY id Ben Hutchings
2009-03-02 11:26   ` David Miller
2009-02-27 23:07 ` [PATCH 6/9] sfc: Add support for QT2025C PHY Ben Hutchings
2009-03-02 11:26   ` David Miller
2009-02-27 23:07 ` [PATCH 7/9] sfc: Delete unused efx_blinker::led_num field Ben Hutchings
2009-03-02 11:26   ` David Miller
2009-02-27 23:08 ` Ben Hutchings [this message]
2009-03-02 11:26   ` [PATCH 8/9] sfc: Clean up LED control David Miller
2009-02-27 23:08 ` [PATCH 9/9] sfc: Add support for SFN4112F SFP+ reference design Ben Hutchings
2009-03-02 11:26   ` David Miller
2009-03-02 11:26 ` [PATCH 1/9] sfc: SFT9001: Include non-breaking cable diagnostics in online self-tests David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1235776083.3164.28.camel@achroite \
    --to=bhutchings@solarflare.com \
    --cc=davem@davemloft.net \
    --cc=linux-net-drivers@solarflare.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.