* Re: meta-fsl-bsp-release/imx/meta-fsl-arm/conf/layer.conf not found
2014-09-10 21:53 ` meta-fsl-bsp-release/imx/meta-fsl-arm/conf/layer.conf not found Lynn Birch
@ 2014-09-11 13:52 ` Daiane Angolini
2014-09-11 14:07 ` Lauren Post
1 sibling, 0 replies; 3+ messages in thread
From: Daiane Angolini @ 2014-09-11 13:52 UTC (permalink / raw)
To: Lynn Birch; +Cc: meta-freescale@yoctoproject.org
On Wed, Sep 10, 2014 at 6:53 PM, Lynn Birch <l.lynnbirch@comcast.net> wrote:
> I'm trying to build fsl-image-gui for imx6 and get the following error....
> ( can't find the layer.conf file.)
>
> $ bitbake fsl-image-gui
> IOError: file
> /home/marc/var-som-mx6-dora-v5/sources/meta-fsl-bsp-release/imx/meta-fsl-arm/conf/layer.conf
> not found
> When I look in that directory, I don't see that file either...
>
> $ cd
> /home/marc/var-som-mx6-dora-v5/sources/meta-fsl-bsp-release/imx/meta-fsl-arm/conf
> $ ls
> bblayers.conf bblayers.conf.org local.conf local.conf.org
> local.conf.sample sanity_info
>
>
> I did repo sync yesterday and i''m using
> https://github.com/Freescale/fsl-community-bsp-platform -b dora is there a
If you are using
https://github.com/Freescale/fsl-community-bsp-platform -b dora
Why does your code expect to find meta-fsl-bsp-release?
> patch i'm missing ?
If you´re willing to use meta-fsl-bsp-release, you have a different
how-to-download you can find [1] in case you want dora + 3.10.17-GA
Make sure the board you´re using is supported.
[1] http://git.freescale.com/git/cgit.cgi/imx/meta-fsl-bsp-release.git/tree/imx/README?h=dora_3.10.17-1.0.0_GA
In other hand, if you don´t want to use meta-fsl-bsp-release, or your
board is not supported in meta-fsl-bsp-release (and is in
meta-fsl-arm) you should remove meta-fsl-bsp-release from your
bblayers.conf
In this second case, you can use daisy instead.
Please, let me know your questions,
Daiane
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: meta-fsl-bsp-release/imx/meta-fsl-arm/conf/layer.conf not found
2014-09-10 21:53 ` meta-fsl-bsp-release/imx/meta-fsl-arm/conf/layer.conf not found Lynn Birch
2014-09-11 13:52 ` Daiane Angolini
@ 2014-09-11 14:07 ` Lauren Post
1 sibling, 0 replies; 3+ messages in thread
From: Lauren Post @ 2014-09-11 14:07 UTC (permalink / raw)
To: Lynn Birch, meta-freescale@yoctoproject.org
[-- Attachment #1: Type: text/plain, Size: 2459 bytes --]
I usually see this when I exit environment and go back into build without reinitializing the build environment.
If you have an existing build directory from above that run setup-environment <build_dir>
And it will re-initialize your build environment for building. It will not recreate the folder but just re-initialize the environment with poky.
This is for either running with our release layer or with just community only build.
Lauren
From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of Lynn Birch
Sent: Wednesday, September 10, 2014 4:53 PM
To: meta-freescale@yoctoproject.org
Subject: [meta-freescale] meta-fsl-bsp-release/imx/meta-fsl-arm/conf/layer.conf not found
I'm trying to build fsl-image-gui for imx6 and get the following error.... ( can't find the layer.conf file.)
$ bitbake fsl-image-gui
ERROR: Traceback (most recent call last):
File "/home/marc/var-som-mx6-dora-v5/sources/poky/bitbake/lib/bb/cookerdata.py", line 162, in wrapped
return func(fn, *args)
File "/home/marc/var-som-mx6-dora-v5/sources/poky/bitbake/lib/bb/cookerdata.py", line 172, in parse_config_file
return bb.parse.handle(fn, data, include)
File "/home/marc/var-som-mx6-dora-v5/sources/poky/bitbake/lib/bb/parse/__init__.py", line 99, in handle
return h['handle'](fn, data, include)
File "/home/marc/var-som-mx6-dora-v5/sources/poky/bitbake/lib/bb/parse/parse_py/ConfHandler.py", line 120, in handle
abs_fn = resolve_file(fn, data)
File "/home/marc/var-som-mx6-dora-v5/sources/poky/bitbake/lib/bb/parse/__init__.py", line 122, in resolve_file
raise IOError("file %s not found" % fn)
IOError: file /home/marc/var-som-mx6-dora-v5/sources/meta-fsl-bsp-release/imx/meta-fsl-arm/conf/layer.conf not found
ERROR: Unable to parse /home/marc/var-som-mx6-dora-v5/sources/meta-fsl-bsp-release/imx/meta-fsl-arm/conf/layer.conf: file /home/marc/var-som-mx6-dora-v5/sources/meta-fsl-bsp-release/imx/meta-fsl-arm/conf/layer.conf not found
When I look in that directory, I don't see that file either...
$ cd /home/marc/var-som-mx6-dora-v5/sources/meta-fsl-bsp-release/imx/meta-fsl-arm/conf
$ ls
bblayers.conf bblayers.conf.org local.conf local.conf.org local.conf.sample sanity_info
I did repo sync yesterday and i''m using https://github.com/Freescale/fsl-community-bsp-platform -b dora is there a patch i'm missing ?
Regards,
Lynn
[-- Attachment #2: Type: text/html, Size: 8569 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread