From: "Daniel Glöckner" <dg-QdrG9jWwCLEAvxtiuMwx3w@public.gmane.org>
To: Chris Zankel <chris-YvXeqwSYzG2sTnJN9+BGXg@public.gmane.org>,
Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Daniel Glöckner" <dg-QdrG9jWwCLEAvxtiuMwx3w@public.gmane.org>
Subject: [patch 4/5] xtensa: enable s6000 i2c host driver in s6105_defconfig
Date: Mon, 23 Mar 2009 16:05:17 +0100 [thread overview]
Message-ID: <1237820718-30607-4-git-send-email-dg@emlix.com> (raw)
In-Reply-To: <1237820718-30607-1-git-send-email-dg-QdrG9jWwCLEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Daniel Glöckner <dg-QdrG9jWwCLEAvxtiuMwx3w@public.gmane.org>
---
arch/xtensa/configs/s6105_defconfig | 54 +++++++++++++++++++++++++++++++++-
1 files changed, 52 insertions(+), 2 deletions(-)
diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig
index a130c8d..a9a0de9 100644
--- a/arch/xtensa/configs/s6105_defconfig
+++ b/arch/xtensa/configs/s6105_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc7-s6
-# Tue Mar 10 11:09:26 2009
+# Wed Mar 11 13:38:31 2009
#
# CONFIG_FRAME_POINTER is not set
CONFIG_ZONE_DMA=y
@@ -357,7 +357,48 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_S6000=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -371,6 +412,9 @@ CONFIG_GPIOLIB=y
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
@@ -398,7 +442,13 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
--
1.6.2.107.ge47ee
WARNING: multiple messages have this Message-ID (diff)
From: "Daniel Glöckner" <dg@emlix.com>
To: Chris Zankel <chris@zankel.net>, Ben Dooks <ben-linux@fluff.org>
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
"Daniel Glöckner" <dg@emlix.com>
Subject: [patch 4/5] xtensa: enable s6000 i2c host driver in s6105_defconfig
Date: Mon, 23 Mar 2009 16:05:17 +0100 [thread overview]
Message-ID: <1237820718-30607-4-git-send-email-dg@emlix.com> (raw)
In-Reply-To: <1237820718-30607-1-git-send-email-dg@emlix.com>
Signed-off-by: Daniel Glöckner <dg@emlix.com>
---
arch/xtensa/configs/s6105_defconfig | 54 +++++++++++++++++++++++++++++++++-
1 files changed, 52 insertions(+), 2 deletions(-)
diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig
index a130c8d..a9a0de9 100644
--- a/arch/xtensa/configs/s6105_defconfig
+++ b/arch/xtensa/configs/s6105_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc7-s6
-# Tue Mar 10 11:09:26 2009
+# Wed Mar 11 13:38:31 2009
#
# CONFIG_FRAME_POINTER is not set
CONFIG_ZONE_DMA=y
@@ -357,7 +357,48 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_S6000=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -371,6 +412,9 @@ CONFIG_GPIOLIB=y
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
@@ -398,7 +442,13 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
--
1.6.2.107.ge47ee
next prev parent reply other threads:[~2009-03-23 15:05 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-23 15:05 [patch 1/5] i2c: xtensa s6000 i2c driver Daniel Glöckner
2009-03-23 15:05 ` Daniel Glöckner
2009-03-23 15:05 ` [patch 3/5] xtensa: add at24hc02b to s6105 platform Daniel Glöckner
[not found] ` <1237820718-30607-1-git-send-email-dg-QdrG9jWwCLEAvxtiuMwx3w@public.gmane.org>
2009-03-23 15:05 ` [patch 2/5] xtensa: s6105 specific configuration for the s6000 i2c host Daniel Glöckner
2009-03-23 15:05 ` Daniel Glöckner
2009-03-23 15:05 ` Daniel Glöckner [this message]
2009-03-23 15:05 ` [patch 4/5] xtensa: enable s6000 i2c host driver in s6105_defconfig Daniel Glöckner
2009-03-23 15:05 ` [patch 5/5] xtensa: enable at24 " Daniel Glöckner
2009-03-23 15:05 ` Daniel Glöckner
2009-03-31 22:52 ` [patch 1/5] i2c: xtensa s6000 i2c driver Ben Dooks
2009-03-31 22:52 ` Ben Dooks
[not found] ` <20090331225258.GN19758-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2009-03-31 23:01 ` Ben Dooks
2009-03-31 23:01 ` Ben Dooks
[not found] ` <20090331230134.GP19758-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2009-04-02 11:19 ` [patch v2] " Oskar Schirmer
2009-04-02 11:19 ` Oskar Schirmer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1237820718-30607-4-git-send-email-dg@emlix.com \
--to=dg-qdrg9jwwcleavxtiumwx3w@public.gmane.org \
--cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=chris-YvXeqwSYzG2sTnJN9+BGXg@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.