All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: linuxppc-dev@ozlabs.org, linux-mtd@lists.infradead.org
Cc: Grant Likely <grant.likely@secretlab.ca>, devicetree-discuss@ozlabs.org
Subject: [PATCH 3/4 v2] mtd/powerpc: Remove unused "device-width" property
Date: Tue,  7 Apr 2009 10:39:35 +0200	[thread overview]
Message-ID: <1239093575-12147-1-git-send-email-sr@denx.de> (raw)

This property is unused. It's not handled as all by the physmap_of
driver. So let's remove it from the documentation.

Signed-off-by: Stefan Roese <sr@denx.de>
CC: Grant Likely <grant.likely@secretlab.ca>
---
 Documentation/powerpc/dts-bindings/mtd-physmap.txt |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
index cd474f9..ab1115e 100644
--- a/Documentation/powerpc/dts-bindings/mtd-physmap.txt
+++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
@@ -8,8 +8,6 @@ file systems on embedded devices.
  - reg : Address range of the flash chip
  - bank-width : Width (in bytes) of the flash bank.  Equal to the
    device width times the number of interleaved chips.
- - device-width : (optional) Width of a single flash chip.  If
-   omitted, assumed to be equal to 'bank-width'.
  - #address-cells, #size-cells : Must be present if the flash has
    sub-nodes representing partitions (see below).  In this case
    both #address-cells and #size-cells must be equal to 1.
@@ -48,7 +46,6 @@ Example:
 		compatible = "amd,am29lv128ml", "cfi-flash";
 		reg = <ff000000 01000000>;
 		bank-width = <4>;
-		device-width = <1>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		fs@0 {
-- 
1.6.2.2

WARNING: multiple messages have this Message-ID (diff)
From: Stefan Roese <sr@denx.de>
To: linuxppc-dev@ozlabs.org, linux-mtd@lists.infradead.org
Cc: devicetree-discuss@ozlabs.org
Subject: [PATCH 3/4 v2] mtd/powerpc: Remove unused "device-width" property
Date: Tue,  7 Apr 2009 10:39:35 +0200	[thread overview]
Message-ID: <1239093575-12147-1-git-send-email-sr@denx.de> (raw)

This property is unused. It's not handled as all by the physmap_of
driver. So let's remove it from the documentation.

Signed-off-by: Stefan Roese <sr@denx.de>
CC: Grant Likely <grant.likely@secretlab.ca>
---
 Documentation/powerpc/dts-bindings/mtd-physmap.txt |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
index cd474f9..ab1115e 100644
--- a/Documentation/powerpc/dts-bindings/mtd-physmap.txt
+++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
@@ -8,8 +8,6 @@ file systems on embedded devices.
  - reg : Address range of the flash chip
  - bank-width : Width (in bytes) of the flash bank.  Equal to the
    device width times the number of interleaved chips.
- - device-width : (optional) Width of a single flash chip.  If
-   omitted, assumed to be equal to 'bank-width'.
  - #address-cells, #size-cells : Must be present if the flash has
    sub-nodes representing partitions (see below).  In this case
    both #address-cells and #size-cells must be equal to 1.
@@ -48,7 +46,6 @@ Example:
 		compatible = "amd,am29lv128ml", "cfi-flash";
 		reg = <ff000000 01000000>;
 		bank-width = <4>;
-		device-width = <1>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		fs@0 {
-- 
1.6.2.2

WARNING: multiple messages have this Message-ID (diff)
From: Stefan Roese <sr@denx.de>
To: linuxppc-dev@ozlabs.org, linux-mtd@lists.infradead.org
Cc: Grant Likely <grant.likely@secretlab.ca>, devicetree-discuss@ozlabs.org
Subject: [PATCH 3/4 v2] mtd/powerpc: Remove unused "device-width" property
Date: Tue,  7 Apr 2009 10:39:35 +0200	[thread overview]
Message-ID: <1239093575-12147-1-git-send-email-sr@denx.de> (raw)

This property is unused. It's not handled as all by the physmap_of
driver. So let's remove it from the documentation.

Signed-off-by: Stefan Roese <sr@denx.de>
CC: Grant Likely <grant.likely@secretlab.ca>
---
 Documentation/powerpc/dts-bindings/mtd-physmap.txt |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
index cd474f9..ab1115e 100644
--- a/Documentation/powerpc/dts-bindings/mtd-physmap.txt
+++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
@@ -8,8 +8,6 @@ file systems on embedded devices.
  - reg : Address range of the flash chip
  - bank-width : Width (in bytes) of the flash bank.  Equal to the
    device width times the number of interleaved chips.
- - device-width : (optional) Width of a single flash chip.  If
-   omitted, assumed to be equal to 'bank-width'.
  - #address-cells, #size-cells : Must be present if the flash has
    sub-nodes representing partitions (see below).  In this case
    both #address-cells and #size-cells must be equal to 1.
@@ -48,7 +46,6 @@ Example:
 		compatible = "amd,am29lv128ml", "cfi-flash";
 		reg = <ff000000 01000000>;
 		bank-width = <4>;
-		device-width = <1>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		fs@0 {
-- 
1.6.2.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

             reply	other threads:[~2009-04-07  8:39 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-07  8:39 Stefan Roese [this message]
2009-04-07  8:39 ` [PATCH 3/4 v2] mtd/powerpc: Remove unused "device-width" property Stefan Roese
2009-04-07  8:39 ` Stefan Roese
2009-04-07 16:42 ` Scott Wood
2009-04-07 16:54   ` Stefan Roese
2009-04-07 16:54     ` Stefan Roese
2009-04-12  6:01     ` Grant Likely
2009-04-12  6:01       ` Grant Likely

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1239093575-12147-1-git-send-email-sr@denx.de \
    --to=sr@denx.de \
    --cc=devicetree-discuss@ozlabs.org \
    --cc=grant.likely@secretlab.ca \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.