From: Philipp Zabel <philipp.zabel@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Samuel Ortiz <sameo@linux.intel.com>,
Philipp Zabel <philipp.zabel@gmail.com>
Subject: [PATCH 6/7] MFD: ASIC3: enable DS1WM cell.
Date: Fri, 5 Jun 2009 18:31:06 +0200 [thread overview]
Message-ID: <1244219467-32136-7-git-send-email-philipp.zabel@gmail.com> (raw)
In-Reply-To: <1244219467-32136-1-git-send-email-philipp.zabel@gmail.com>
This enables the ASIC3's DS1WM MFD cell, supported by the ds1wm driver.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
---
drivers/mfd/Kconfig | 1 +
drivers/mfd/asic3.c | 100 +++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 101 insertions(+), 0 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ee3927a..9e6d5ee 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -30,6 +30,7 @@ config MFD_SM501_GPIO
config MFD_ASIC3
bool "Support for Compaq ASIC3"
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+ select MFD_CORE
---help---
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index d5dd0df..3fadd02 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -17,6 +17,7 @@
*/
#include <linux/kernel.h>
+#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/io.h>
@@ -24,6 +25,8 @@
#include <linux/platform_device.h>
#include <linux/mfd/asic3.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ds1wm.h>
enum {
ASIC3_CLOCK_SPI,
@@ -616,6 +619,99 @@ static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk)
spin_unlock_irqrestore(&asic->lock, flags);
}
+/* MFD cells (SPI, PWM, LED, DS1WM, MMC) */
+static struct ds1wm_driver_data ds1wm_pdata = {
+ .active_high = 1,
+};
+
+static struct resource ds1wm_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = ASIC3_IRQ_OWM,
+ .start = ASIC3_IRQ_OWM,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static int ds1wm_enable(struct platform_device *pdev)
+{
+ struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+ /* Turn on external clocks and the OWM clock */
+ asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
+ asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
+ asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_OWM]);
+ msleep(1);
+
+ /* Reset and enable DS1WM */
+ asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
+ ASIC3_EXTCF_OWM_RESET, 1);
+ msleep(1);
+ asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
+ ASIC3_EXTCF_OWM_RESET, 0);
+ msleep(1);
+ asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
+ ASIC3_EXTCF_OWM_EN, 1);
+ msleep(1);
+
+ return 0;
+}
+
+static int ds1wm_disable(struct platform_device *pdev)
+{
+ struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+ asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
+ ASIC3_EXTCF_OWM_EN, 0);
+
+ asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_OWM]);
+ asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
+ asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
+
+ return 0;
+}
+
+static struct mfd_cell asic3_cell_ds1wm = {
+ .name = "ds1wm",
+ .enable = ds1wm_enable,
+ .disable = ds1wm_disable,
+ .driver_data = &ds1wm_pdata,
+ .num_resources = ARRAY_SIZE(ds1wm_resources),
+ .resources = ds1wm_resources,
+};
+
+static int __init asic3_mfd_probe(struct platform_device *pdev,
+ struct resource *mem)
+{
+ struct asic3 *asic = platform_get_drvdata(pdev);
+ int ret;
+
+ /* DS1WM */
+ asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
+ ASIC3_EXTCF_OWM_SMB, 0);
+
+ ds1wm_resources[0].start = ASIC3_OWM_BASE >> asic->bus_shift;
+ ds1wm_resources[0].end = ds1wm_resources[0].start
+ + (5 << (2 - asic->bus_shift)) - 1;
+
+ asic3_cell_ds1wm.platform_data = &asic3_cell_ds1wm;
+ asic3_cell_ds1wm.data_size = sizeof(asic3_cell_ds1wm);
+
+ ret = mfd_add_devices(&pdev->dev, pdev->id,
+ &asic3_cell_ds1wm, 1, mem, asic->irq_base);
+
+ return ret;
+}
+
+static void asic3_mfd_remove(struct platform_device *pdev)
+{
+ struct asic3 *asic = platform_get_drvdata(pdev);
+
+ mfd_remove_devices(&pdev->dev);
+}
+
/* Core */
static int __init asic3_probe(struct platform_device *pdev)
{
@@ -683,6 +779,8 @@ static int __init asic3_probe(struct platform_device *pdev)
*/
memcpy(asic->clocks, asic3_clk_init, sizeof(asic3_clk_init));
+ asic3_mfd_probe(pdev, mem);
+
dev_info(asic->dev, "ASIC3 Core driver\n");
return 0;
@@ -704,6 +802,8 @@ static int asic3_remove(struct platform_device *pdev)
int ret;
struct asic3 *asic = platform_get_drvdata(pdev);
+ asic3_mfd_remove(pdev);
+
ret = asic3_gpio_remove(pdev);
if (ret < 0)
return ret;
--
1.6.3.1
next prev parent reply other threads:[~2009-06-05 16:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-05 16:31 [PATCH 0/7] ASIC3 updates (v2) Philipp Zabel
2009-06-05 16:31 ` [PATCH 1/7] MFD: ASIC3: add asic3_set_register common operation Philipp Zabel
2009-06-05 16:31 ` [PATCH 2/7] MFD: ASIC3: add clock handling for MFD cells Philipp Zabel
2009-06-05 16:31 ` [PATCH 3/7] MFD: ASIC3: add ASIC3 IRQ numbers Philipp Zabel
2009-06-05 16:31 ` [PATCH 4/7] MFD: ASIC3: use resource_size macro instead of local variable Philipp Zabel
2009-06-05 16:31 ` [PATCH 5/7] MFD: ASIC3: remove SD/SDIO controller register definitions Philipp Zabel
2009-06-05 16:31 ` Philipp Zabel [this message]
2009-06-12 22:40 ` [PATCH 6/7] MFD: ASIC3: enable DS1WM cell pHilipp Zabel
2009-06-05 16:31 ` [PATCH 7/7] MFD: ASIC3: enable SD/SDIO cell Philipp Zabel
-- strict thread matches above, loose matches on Subject: below --
2009-06-04 18:36 [PATCH 0/7] ASIC3 updates Philipp Zabel
2009-06-04 18:36 ` [PATCH 6/7] MFD: ASIC3: enable DS1WM cell Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1244219467-32136-7-git-send-email-philipp.zabel@gmail.com \
--to=philipp.zabel@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.