Re: Delay on intialization ide subsystem(most likely)

[Benjamin Herrenschmidt <benh@kernel.crashing.org>]

On Thu, 2009-06-11 at 00:38 +0400, Andrey Gusev wrote:

> I try this small fix, traces in disappeared, but lost interrupts on the place:)
> Some interesting thing from dmesg:
> 
> [    0.435806] irq: irq 251 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 251
> [    0.435824] irq: irq 252 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 252
> [    0.435840] irq: irq 253 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 253
> [    0.435856] irq: irq 254 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 254
> [    0.435867] CPU0: L2CR is 80080000
> [    0.435880] CPU0: L3CR is 8f0b0000
> [478142827.057095] CPU1: L2CR was 80000
> [478142827.057133] CPU1: L2CR set to 80080000
> [478142827.057139] CPU1: L3CR was 0
> [478142827.057300] CPU1: L3CR set to 8f0b0000
> [    0.437529] Processor 1 found.
> [    0.437588] clockevent: decrementer mult[886] shift[16] cpu[1]
> 
> This is don't look good.

What doesn't look good ? It's copying the L2CR and L3CR values over from
CPU 0 to CPU 1 when bringing the later up, I don't see anything wrong.

Cheers,
Ben.

> > 
> > 
> > > [   70.584122]  hdb:<3>ide-pmac lost interrupt, dma status: 8480
> > 
> > DMA status indicates that DMA transfer is still active according to
> > the controller.  This one is really a platform/hardware specific
> > issue.
> > 
> 
> Notes for Ben, I checked only 2.6.26, but may be somebody checked 2.6.24
> or this is interpolation.
> 
> Thanks,
> Andrey