From: Borislav Petkov <petkovbb@googlemail.com>
To: davem@davemloft.net
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] ide-tape: convert to ide_debug_log macro
Date: Sat, 18 Jul 2009 11:55:16 +0200 [thread overview]
Message-ID: <1247910917-5237-3-git-send-email-petkovbb@gmail.com> (raw)
In-Reply-To: <1247910917-5237-1-git-send-email-petkovbb@gmail.com>
Remove tape->debug_mask and use drive->debug_mask instead.
There should be no functional change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-tape.c | 102 +++++++++++++++++++++++-------------------------
1 files changed, 49 insertions(+), 53 deletions(-)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 60d5c41..08f09f5 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -47,28 +47,13 @@
#include <asm/unaligned.h>
#include <linux/mtio.h>
-enum {
- /* output errors only */
- DBG_ERR = (1 << 0),
- /* output all sense key/asc */
- DBG_SENSE = (1 << 1),
- /* info regarding all chrdev-related procedures */
- DBG_CHRDEV = (1 << 2),
- /* all remaining procedures */
- DBG_PROCS = (1 << 3),
-};
-
/* define to see debug info */
-#define IDETAPE_DEBUG_LOG 0
+#undef IDETAPE_DEBUG_LOG
-#if IDETAPE_DEBUG_LOG
-#define debug_log(lvl, fmt, args...) \
-{ \
- if (tape->debug_mask & lvl) \
- printk(KERN_INFO "ide-tape: " fmt, ## args); \
-}
+#ifdef IDETAPE_DEBUG_LOG
+#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, ## args)
#else
-#define debug_log(lvl, fmt, args...) do {} while (0)
+#define ide_debug_log(lvl, fmt, args...) do {} while (0)
#endif
/**************************** Tunable parameters *****************************/
@@ -230,8 +215,6 @@ typedef struct ide_tape_obj {
char drv_write_prot;
/* the tape is write protected (hardware or opened as read-only) */
char write_prot;
-
- u32 debug_mask;
} idetape_tape_t;
static DEFINE_MUTEX(idetape_ref_mutex);
@@ -290,8 +273,9 @@ static void idetape_analyze_error(ide_drive_t *drive)
tape->asc = sense[12];
tape->ascq = sense[13];
- debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n",
- pc->c[0], tape->sense_key, tape->asc, tape->ascq);
+ ide_debug_log(IDE_DBG_FUNC,
+ "cmd: 0x%x, sense key = %x, asc = %x, ascq = %x",
+ rq->cmd[0], tape->sense_key, tape->asc, tape->ascq);
/* correct remaining bytes to transfer */
if (pc->flags & PC_FLAG_DMA_ERROR)
@@ -344,7 +328,8 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
int uptodate = pc->error ? 0 : 1;
int err = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, dsc: %d, err: %d", rq->cmd[0],
+ dsc, err);
if (dsc)
ide_tape_handle_dsc(drive);
@@ -390,10 +375,12 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
static void idetape_postpone_request(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
+ struct request *rq = drive->hwif->rq;
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, dsc_poll_freq: %lu",
+ rq->cmd[0], tape->dsc_poll_freq);
- tape->postponed_rq = drive->hwif->rq;
+ tape->postponed_rq = rq;
ide_stall_queue(drive, tape->dsc_poll_freq);
}
@@ -488,7 +475,8 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
return ide_stopped;
}
- debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
+ ide_debug_log(IDE_DBG_SENSE, "retry #%d, cmd: 0x%02x", pc->retries,
+ pc->c[0]);
pc->retries++;
@@ -583,8 +571,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
struct ide_cmd cmd;
u8 stat;
- debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %u\n",
- (unsigned long long)blk_rq_pos(rq), blk_rq_sectors(rq));
+ ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, sector: %llu, nr_sectors: %u",
+ rq->cmd[0], (unsigned long long)blk_rq_pos(rq),
+ blk_rq_sectors(rq));
BUG_ON(!(blk_special_request(rq) || blk_sense_request(rq)));
@@ -745,7 +734,7 @@ static int ide_tape_read_position(ide_drive_t *drive)
struct ide_atapi_pc pc;
u8 buf[20];
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "enter");
/* prep cmd */
ide_init_pc(&pc);
@@ -756,9 +745,9 @@ static int ide_tape_read_position(ide_drive_t *drive)
return -1;
if (!pc.error) {
- debug_log(DBG_SENSE, "BOP - %s\n",
+ ide_debug_log(IDE_DBG_FUNC, "BOP - %s",
(buf[0] & 0x80) ? "Yes" : "No");
- debug_log(DBG_SENSE, "EOP - %s\n",
+ ide_debug_log(IDE_DBG_FUNC, "EOP - %s",
(buf[0] & 0x40) ? "Yes" : "No");
if (buf[0] & 0x4) {
@@ -768,8 +757,8 @@ static int ide_tape_read_position(ide_drive_t *drive)
&drive->atapi_flags);
return -1;
} else {
- debug_log(DBG_SENSE, "Block Location - %u\n",
- be32_to_cpup((__be32 *)&buf[4]));
+ ide_debug_log(IDE_DBG_FUNC, "Block Location: %u",
+ be32_to_cpup((__be32 *)&buf[4]));
tape->partition = buf[1];
tape->first_frame = be32_to_cpup((__be32 *)&buf[4]);
@@ -866,7 +855,8 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size)
struct request *rq;
int ret;
- debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
+ ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, size: %d", cmd, size);
+
BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE);
BUG_ON(size < 0 || size % tape->blk_size);
@@ -1029,7 +1019,7 @@ static int idetape_rewind_tape(ide_drive_t *drive)
struct ide_atapi_pc pc;
int ret;
- debug_log(DBG_SENSE, "Enter %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "enter");
idetape_create_rewind_cmd(drive, &pc);
ret = ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
@@ -1055,7 +1045,7 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd,
int nr_stages;
} config;
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%04x", cmd);
switch (cmd) {
case 0x0340:
@@ -1084,6 +1074,9 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
int retval, count = 0;
int sprev = !!(tape->caps[4] & 0x20);
+
+ ide_debug_log(IDE_DBG_FUNC, "mt_op: %d, mt_count: %d", mt_op, mt_count);
+
if (mt_count == 0)
return 0;
if (MTBSF == mt_op || MTBSFM == mt_op) {
@@ -1147,7 +1140,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
ssize_t ret = 0;
int rc;
- debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
+ ide_debug_log(IDE_DBG_FUNC, "count %Zd", count);
if (tape->chrdev_dir != IDETAPE_DIR_READ) {
if (test_bit(ilog2(IDE_AFLAG_DETECT_BS), &drive->atapi_flags))
@@ -1186,8 +1179,6 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
}
if (!done && test_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags)) {
- debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
-
idetape_space_over_filemarks(drive, MTFSF, 1);
return 0;
}
@@ -1208,7 +1199,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
if (tape->write_prot)
return -EACCES;
- debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
+ ide_debug_log(IDE_DBG_FUNC, "count %Zd", count);
/* Initialize write operation */
rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE);
@@ -1272,8 +1263,8 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
struct ide_atapi_pc pc;
int i, retval;
- debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n",
- mt_op, mt_count);
+ ide_debug_log(IDE_DBG_FUNC, "MTIOCTOP ioctl: mt_op: %d, mt_count: %d",
+ mt_op, mt_count);
switch (mt_op) {
case MTFSF:
@@ -1392,7 +1383,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
int block_offset = 0, position = tape->first_frame;
void __user *argp = (void __user *)arg;
- debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd);
+ ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x", cmd);
if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
ide_tape_flush_merge_buffer(drive);
@@ -1460,6 +1451,9 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
(buf[4 + 6] << 8) +
buf[4 + 7];
tape->drv_write_prot = (buf[2] & 0x80) >> 7;
+
+ ide_debug_log(IDE_DBG_FUNC, "blk_size: %d, write_prot: %d",
+ tape->blk_size, tape->drv_write_prot);
}
static int idetape_chrdev_open(struct inode *inode, struct file *filp)
@@ -1479,7 +1473,10 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
return -ENXIO;
}
- debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
+ drive = tape->drive;
+ filp->private_data = tape;
+
+ ide_debug_log(IDE_DBG_FUNC, "enter");
/*
* We really want to do nonseekable_open(inode, filp); here, but some
@@ -1488,9 +1485,6 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
*/
filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
- drive = tape->drive;
-
- filp->private_data = tape;
if (test_and_set_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags)) {
retval = -EBUSY;
@@ -1569,7 +1563,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
lock_kernel();
tape = drive->driver_data;
- debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "enter");
if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
idetape_write_release(drive, minor);
@@ -1706,7 +1700,6 @@ static int divf_buffer_size(ide_drive_t *drive) { return 1024; }
ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP);
-ide_tape_devset_rw_field(debug_mask, debug_mask);
ide_tape_devset_rw_field(tdsc, best_dsc_rw_freq);
ide_tape_devset_r_field(avg_speed, avg_speed);
@@ -1718,7 +1711,6 @@ static const struct ide_proc_devset idetape_settings[] = {
__IDE_PROC_DEVSET(avg_speed, 0, 0xffff, NULL, NULL),
__IDE_PROC_DEVSET(buffer, 0, 0xffff, NULL, divf_buffer),
__IDE_PROC_DEVSET(buffer_size, 0, 0xffff, NULL, divf_buffer_size),
- __IDE_PROC_DEVSET(debug_mask, 0, 0xffff, NULL, NULL),
__IDE_PROC_DEVSET(dsc_overlap, 0, 1, NULL, NULL),
__IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL),
__IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
@@ -1745,7 +1737,9 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
int buffer_size;
u16 *ctl = (u16 *)&tape->caps[12];
- drive->pc_callback = ide_tape_callback;
+ ide_debug_log(IDE_DBG_FUNC, "minor: %d", minor);
+
+ drive->pc_callback = ide_tape_callback;
drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
@@ -1931,7 +1925,9 @@ static int ide_tape_probe(ide_drive_t *drive)
struct gendisk *g;
int minor;
- if (!strstr("ide-tape", drive->driver_req))
+ ide_debug_log(IDE_DBG_FUNC, "enter");
+
+ if (!strstr(DRV_NAME, drive->driver_req))
goto failed;
if (drive->media != ide_tape)
--
1.6.3.3
WARNING: multiple messages have this Message-ID (diff)
From: Borislav Petkov <petkovbb@googlemail.com>
To: <davem@davemloft.net>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] ide-tape: convert to ide_debug_log macro
Date: Sat, 18 Jul 2009 11:55:16 +0200 [thread overview]
Message-ID: <1247910917-5237-3-git-send-email-petkovbb@gmail.com> (raw)
In-Reply-To: <1247910917-5237-1-git-send-email-petkovbb@gmail.com>
Remove tape->debug_mask and use drive->debug_mask instead.
There should be no functional change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-tape.c | 102 +++++++++++++++++++++++-------------------------
1 files changed, 49 insertions(+), 53 deletions(-)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 60d5c41..08f09f5 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -47,28 +47,13 @@
#include <asm/unaligned.h>
#include <linux/mtio.h>
-enum {
- /* output errors only */
- DBG_ERR = (1 << 0),
- /* output all sense key/asc */
- DBG_SENSE = (1 << 1),
- /* info regarding all chrdev-related procedures */
- DBG_CHRDEV = (1 << 2),
- /* all remaining procedures */
- DBG_PROCS = (1 << 3),
-};
-
/* define to see debug info */
-#define IDETAPE_DEBUG_LOG 0
+#undef IDETAPE_DEBUG_LOG
-#if IDETAPE_DEBUG_LOG
-#define debug_log(lvl, fmt, args...) \
-{ \
- if (tape->debug_mask & lvl) \
- printk(KERN_INFO "ide-tape: " fmt, ## args); \
-}
+#ifdef IDETAPE_DEBUG_LOG
+#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, ## args)
#else
-#define debug_log(lvl, fmt, args...) do {} while (0)
+#define ide_debug_log(lvl, fmt, args...) do {} while (0)
#endif
/**************************** Tunable parameters *****************************/
@@ -230,8 +215,6 @@ typedef struct ide_tape_obj {
char drv_write_prot;
/* the tape is write protected (hardware or opened as read-only) */
char write_prot;
-
- u32 debug_mask;
} idetape_tape_t;
static DEFINE_MUTEX(idetape_ref_mutex);
@@ -290,8 +273,9 @@ static void idetape_analyze_error(ide_drive_t *drive)
tape->asc = sense[12];
tape->ascq = sense[13];
- debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n",
- pc->c[0], tape->sense_key, tape->asc, tape->ascq);
+ ide_debug_log(IDE_DBG_FUNC,
+ "cmd: 0x%x, sense key = %x, asc = %x, ascq = %x",
+ rq->cmd[0], tape->sense_key, tape->asc, tape->ascq);
/* correct remaining bytes to transfer */
if (pc->flags & PC_FLAG_DMA_ERROR)
@@ -344,7 +328,8 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
int uptodate = pc->error ? 0 : 1;
int err = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, dsc: %d, err: %d", rq->cmd[0],
+ dsc, err);
if (dsc)
ide_tape_handle_dsc(drive);
@@ -390,10 +375,12 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
static void idetape_postpone_request(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
+ struct request *rq = drive->hwif->rq;
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, dsc_poll_freq: %lu",
+ rq->cmd[0], tape->dsc_poll_freq);
- tape->postponed_rq = drive->hwif->rq;
+ tape->postponed_rq = rq;
ide_stall_queue(drive, tape->dsc_poll_freq);
}
@@ -488,7 +475,8 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
return ide_stopped;
}
- debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
+ ide_debug_log(IDE_DBG_SENSE, "retry #%d, cmd: 0x%02x", pc->retries,
+ pc->c[0]);
pc->retries++;
@@ -583,8 +571,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
struct ide_cmd cmd;
u8 stat;
- debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %u\n",
- (unsigned long long)blk_rq_pos(rq), blk_rq_sectors(rq));
+ ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, sector: %llu, nr_sectors: %u",
+ rq->cmd[0], (unsigned long long)blk_rq_pos(rq),
+ blk_rq_sectors(rq));
BUG_ON(!(blk_special_request(rq) || blk_sense_request(rq)));
@@ -745,7 +734,7 @@ static int ide_tape_read_position(ide_drive_t *drive)
struct ide_atapi_pc pc;
u8 buf[20];
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "enter");
/* prep cmd */
ide_init_pc(&pc);
@@ -756,9 +745,9 @@ static int ide_tape_read_position(ide_drive_t *drive)
return -1;
if (!pc.error) {
- debug_log(DBG_SENSE, "BOP - %s\n",
+ ide_debug_log(IDE_DBG_FUNC, "BOP - %s",
(buf[0] & 0x80) ? "Yes" : "No");
- debug_log(DBG_SENSE, "EOP - %s\n",
+ ide_debug_log(IDE_DBG_FUNC, "EOP - %s",
(buf[0] & 0x40) ? "Yes" : "No");
if (buf[0] & 0x4) {
@@ -768,8 +757,8 @@ static int ide_tape_read_position(ide_drive_t *drive)
&drive->atapi_flags);
return -1;
} else {
- debug_log(DBG_SENSE, "Block Location - %u\n",
- be32_to_cpup((__be32 *)&buf[4]));
+ ide_debug_log(IDE_DBG_FUNC, "Block Location: %u",
+ be32_to_cpup((__be32 *)&buf[4]));
tape->partition = buf[1];
tape->first_frame = be32_to_cpup((__be32 *)&buf[4]);
@@ -866,7 +855,8 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size)
struct request *rq;
int ret;
- debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
+ ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, size: %d", cmd, size);
+
BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE);
BUG_ON(size < 0 || size % tape->blk_size);
@@ -1029,7 +1019,7 @@ static int idetape_rewind_tape(ide_drive_t *drive)
struct ide_atapi_pc pc;
int ret;
- debug_log(DBG_SENSE, "Enter %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "enter");
idetape_create_rewind_cmd(drive, &pc);
ret = ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
@@ -1055,7 +1045,7 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd,
int nr_stages;
} config;
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%04x", cmd);
switch (cmd) {
case 0x0340:
@@ -1084,6 +1074,9 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
int retval, count = 0;
int sprev = !!(tape->caps[4] & 0x20);
+
+ ide_debug_log(IDE_DBG_FUNC, "mt_op: %d, mt_count: %d", mt_op, mt_count);
+
if (mt_count == 0)
return 0;
if (MTBSF == mt_op || MTBSFM == mt_op) {
@@ -1147,7 +1140,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
ssize_t ret = 0;
int rc;
- debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
+ ide_debug_log(IDE_DBG_FUNC, "count %Zd", count);
if (tape->chrdev_dir != IDETAPE_DIR_READ) {
if (test_bit(ilog2(IDE_AFLAG_DETECT_BS), &drive->atapi_flags))
@@ -1186,8 +1179,6 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
}
if (!done && test_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags)) {
- debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
-
idetape_space_over_filemarks(drive, MTFSF, 1);
return 0;
}
@@ -1208,7 +1199,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
if (tape->write_prot)
return -EACCES;
- debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
+ ide_debug_log(IDE_DBG_FUNC, "count %Zd", count);
/* Initialize write operation */
rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE);
@@ -1272,8 +1263,8 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
struct ide_atapi_pc pc;
int i, retval;
- debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n",
- mt_op, mt_count);
+ ide_debug_log(IDE_DBG_FUNC, "MTIOCTOP ioctl: mt_op: %d, mt_count: %d",
+ mt_op, mt_count);
switch (mt_op) {
case MTFSF:
@@ -1392,7 +1383,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
int block_offset = 0, position = tape->first_frame;
void __user *argp = (void __user *)arg;
- debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd);
+ ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x", cmd);
if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
ide_tape_flush_merge_buffer(drive);
@@ -1460,6 +1451,9 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
(buf[4 + 6] << 8) +
buf[4 + 7];
tape->drv_write_prot = (buf[2] & 0x80) >> 7;
+
+ ide_debug_log(IDE_DBG_FUNC, "blk_size: %d, write_prot: %d",
+ tape->blk_size, tape->drv_write_prot);
}
static int idetape_chrdev_open(struct inode *inode, struct file *filp)
@@ -1479,7 +1473,10 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
return -ENXIO;
}
- debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
+ drive = tape->drive;
+ filp->private_data = tape;
+
+ ide_debug_log(IDE_DBG_FUNC, "enter");
/*
* We really want to do nonseekable_open(inode, filp); here, but some
@@ -1488,9 +1485,6 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
*/
filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
- drive = tape->drive;
-
- filp->private_data = tape;
if (test_and_set_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags)) {
retval = -EBUSY;
@@ -1569,7 +1563,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
lock_kernel();
tape = drive->driver_data;
- debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "enter");
if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
idetape_write_release(drive, minor);
@@ -1706,7 +1700,6 @@ static int divf_buffer_size(ide_drive_t *drive) { return 1024; }
ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP);
-ide_tape_devset_rw_field(debug_mask, debug_mask);
ide_tape_devset_rw_field(tdsc, best_dsc_rw_freq);
ide_tape_devset_r_field(avg_speed, avg_speed);
@@ -1718,7 +1711,6 @@ static const struct ide_proc_devset idetape_settings[] = {
__IDE_PROC_DEVSET(avg_speed, 0, 0xffff, NULL, NULL),
__IDE_PROC_DEVSET(buffer, 0, 0xffff, NULL, divf_buffer),
__IDE_PROC_DEVSET(buffer_size, 0, 0xffff, NULL, divf_buffer_size),
- __IDE_PROC_DEVSET(debug_mask, 0, 0xffff, NULL, NULL),
__IDE_PROC_DEVSET(dsc_overlap, 0, 1, NULL, NULL),
__IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL),
__IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
@@ -1745,7 +1737,9 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
int buffer_size;
u16 *ctl = (u16 *)&tape->caps[12];
- drive->pc_callback = ide_tape_callback;
+ ide_debug_log(IDE_DBG_FUNC, "minor: %d", minor);
+
+ drive->pc_callback = ide_tape_callback;
drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
@@ -1931,7 +1925,9 @@ static int ide_tape_probe(ide_drive_t *drive)
struct gendisk *g;
int minor;
- if (!strstr("ide-tape", drive->driver_req))
+ ide_debug_log(IDE_DBG_FUNC, "enter");
+
+ if (!strstr(DRV_NAME, drive->driver_req))
goto failed;
if (drive->media != ide_tape)
--
1.6.3.3
next prev parent reply other threads:[~2009-07-18 9:55 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-18 9:55 [PATCH 0/3] ide-tape: misc stuff Borislav Petkov
2009-07-18 9:55 ` Borislav Petkov
2009-07-18 9:55 ` [PATCH 1/3] ide-tape: fix debug call Borislav Petkov
2009-07-18 9:55 ` Borislav Petkov
2009-07-22 3:45 ` David Miller
2009-07-18 9:55 ` Borislav Petkov [this message]
2009-07-18 9:55 ` [PATCH 2/3] ide-tape: convert to ide_debug_log macro Borislav Petkov
2009-07-22 3:46 ` David Miller
2009-07-18 9:55 ` [PATCH 3/3] ide-tape: fix handling of postponed rqs Borislav Petkov
2009-07-18 9:55 ` Borislav Petkov
2009-07-18 10:24 ` Test only Sébastien Major
2009-07-18 10:32 ` Re : Test only. [resolved] Sébastien Major
2009-07-22 3:47 ` [PATCH 3/3] ide-tape: fix handling of postponed rqs David Miller
2009-07-22 3:47 ` David Miller
2009-07-22 5:56 ` Borislav Petkov
2009-07-22 6:08 ` David Miller
2009-07-22 6:08 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1247910917-5237-3-git-send-email-petkovbb@gmail.com \
--to=petkovbb@googlemail.com \
--cc=davem@davemloft.net \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.