* [LTP] ltp: IMA cross platform fixes @ 2009-07-16 10:59 Mimi Zohar 2009-07-19 5:15 ` Garrett Cooper 2009-07-19 5:26 ` Mike Frysinger 0 siblings, 2 replies; 10+ messages in thread From: Mimi Zohar @ 2009-07-16 10:59 UTC (permalink / raw) To: ltp-list; +Cc: waqar afridi, Shaz - Instead of using the default platform shell, explicitly use bash. - To create a file using 'sudo -u', some platforms require 'user' to exist. - Document verifying PCR-10 fails on Ubuntu on reboot due to kexec. Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh =================================================================== --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh @@ -1,4 +1,4 @@ -#!/bin/sh +#!/bin/bash ################################################################################ ## ## @@ -137,12 +137,13 @@ test03() # create file user-test.txt mkdir -m 0700 $LTPIMA/user - chown 99.99 $LTPIMA/user + chown nobody.nobody $LTPIMA/user cd $LTPIMA/user hash=0 - # As user 99, create and cat the new file - sudo -u \#99 sh -c "echo `date` - create test.txt > ./test.txt; + # As user nobody, create and cat the new file + # (The LTP tests assumes existence of 'nobody'.) + sudo -u nobody sh -c "echo `date` - create test.txt > ./test.txt; cat ./test.txt > /dev/null" # Calculating the hash will add the measurement to the measurement Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_policy.sh =================================================================== --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_policy.sh +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_policy.sh @@ -1,4 +1,4 @@ -#!/bin/sh +#!/bin/bash ################################################################################ ## ## ## Copyright (C) 2009 IBM Corporation ## Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_setup.sh =================================================================== --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_setup.sh +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_setup.sh @@ -1,4 +1,4 @@ -#!/bin/sh +#!/bin/bash ################################################################################ ## ## ## Copyright (C) 2009 IBM Corporation ## Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_tpm.sh =================================================================== --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_tpm.sh +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_tpm.sh @@ -1,4 +1,4 @@ -#!/bin/sh +#!/bin/bash ################################################################################ ## ## Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_violations.sh =================================================================== --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_violations.sh +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_violations.sh @@ -1,4 +1,4 @@ -#!/bin/sh +#!/bin/bash ################################################################################ ## ## ## Copyright (C) 2009 IBM Corporation ## Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/README =================================================================== --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/README +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/README @@ -52,6 +52,10 @@ open for read by root. If the default po another measurement policy will fail, as the policy may only be replaced once per boot. Some of the policy dependency tests might also fail as well. +ima_tpm.sh: test02, verifying the PCR-10 value, requires a hard reboot. +[On Ubuntu, before running the ltp tests, disable /etc/init.d/kexec-load +and reboot.] + Run tests --------- After doing 'make' and 'make install' from the top-level, ------------------------------------------------------------------------------ Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] ltp: IMA cross platform fixes 2009-07-16 10:59 [LTP] ltp: IMA cross platform fixes Mimi Zohar @ 2009-07-19 5:15 ` Garrett Cooper 2009-07-19 5:26 ` Mike Frysinger 2009-07-22 21:20 ` Mimi Zohar 2009-07-19 5:26 ` Mike Frysinger 1 sibling, 2 replies; 10+ messages in thread From: Garrett Cooper @ 2009-07-19 5:15 UTC (permalink / raw) To: Mimi Zohar; +Cc: waqar afridi, ltp-list, Shaz On Thu, Jul 16, 2009 at 3:59 AM, Mimi Zohar<zohar@linux.vnet.ibm.com> wrote: > - Instead of using the default platform shell, explicitly use bash. > - To create a file using 'sudo -u', some platforms require 'user' to exist. > - Document verifying PCR-10 fails on Ubuntu on reboot due to kexec. > > Signed-off-by: Mimi Zohar <zohar@us.ibm.com> > > Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh > =================================================================== > --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh > +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh > @@ -1,4 +1,4 @@ > -#!/bin/sh > +#!/bin/bash > > ################################################################################ > ## ## > @@ -137,12 +137,13 @@ test03() > > # create file user-test.txt > mkdir -m 0700 $LTPIMA/user > - chown 99.99 $LTPIMA/user > + chown nobody.nobody $LTPIMA/user > cd $LTPIMA/user > hash=0 > > - # As user 99, create and cat the new file > - sudo -u \#99 sh -c "echo `date` - create test.txt > ./test.txt; > + # As user nobody, create and cat the new file > + # (The LTP tests assumes existence of 'nobody'.) > + sudo -u nobody sh -c "echo `date` - create test.txt > ./test.txt; > cat ./test.txt > /dev/null" > > # Calculating the hash will add the measurement to the measurement > Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_policy.sh > =================================================================== > --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_policy.sh > +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_policy.sh > @@ -1,4 +1,4 @@ > -#!/bin/sh > +#!/bin/bash > ################################################################################ > ## ## > ## Copyright (C) 2009 IBM Corporation ## > Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_setup.sh > =================================================================== > --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_setup.sh > +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_setup.sh > @@ -1,4 +1,4 @@ > -#!/bin/sh > +#!/bin/bash > ################################################################################ > ## ## > ## Copyright (C) 2009 IBM Corporation ## > Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_tpm.sh > =================================================================== > --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_tpm.sh > +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_tpm.sh > @@ -1,4 +1,4 @@ > -#!/bin/sh > +#!/bin/bash > > ################################################################################ > ## ## > Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_violations.sh > =================================================================== > --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_violations.sh > +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_violations.sh > @@ -1,4 +1,4 @@ > -#!/bin/sh > +#!/bin/bash > ################################################################################ > ## ## > ## Copyright (C) 2009 IBM Corporation ## > Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/README > =================================================================== > --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/README > +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/README > @@ -52,6 +52,10 @@ open for read by root. If the default po > another measurement policy will fail, as the policy may only be replaced > once per boot. Some of the policy dependency tests might also fail as well. > > +ima_tpm.sh: test02, verifying the PCR-10 value, requires a hard reboot. > +[On Ubuntu, before running the ltp tests, disable /etc/init.d/kexec-load > +and reboot.] > + > Run tests Hi Mimi, The change to testcases/kernel/security/integrity/ima/tests/ima_measurements.sh, minus the shebang change looks ok. /bin/sh should remain the standard, but a number of changes need to happen to the .sh scripts to make them POSIX compatible, e.g. backticks execution should become $(), etc. Let's not make things bash-only... Thanks, -Garrett ------------------------------------------------------------------------------ Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] ltp: IMA cross platform fixes 2009-07-19 5:15 ` Garrett Cooper @ 2009-07-19 5:26 ` Mike Frysinger 2009-07-19 5:35 ` Garrett Cooper 2009-07-22 21:20 ` Mimi Zohar 1 sibling, 1 reply; 10+ messages in thread From: Mike Frysinger @ 2009-07-19 5:26 UTC (permalink / raw) To: ltp-list; +Cc: waqar afridi, Shaz, Mimi Zohar, ltp-list [-- Attachment #1.1: Type: text/plain, Size: 305 bytes --] On Sunday 19 July 2009 01:15:04 Garrett Cooper wrote: > /bin/sh should remain the standard, but a number of changes need > to happen to the .sh scripts to make them POSIX compatible, e.g. > backticks execution should become $(), etc. Let's not make things > bash-only... umm, `cmd` is in POSIX -mike [-- Attachment #1.2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 836 bytes --] [-- Attachment #2: Type: text/plain, Size: 389 bytes --] ------------------------------------------------------------------------------ Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge [-- Attachment #3: Type: text/plain, Size: 155 bytes --] _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] ltp: IMA cross platform fixes 2009-07-19 5:26 ` Mike Frysinger @ 2009-07-19 5:35 ` Garrett Cooper 2009-07-19 5:48 ` Mike Frysinger 0 siblings, 1 reply; 10+ messages in thread From: Garrett Cooper @ 2009-07-19 5:35 UTC (permalink / raw) To: Mike Frysinger; +Cc: waqar afridi, ltp-list, Shaz, Mimi Zohar, ltp-list On Sat, Jul 18, 2009 at 10:26 PM, Mike Frysinger<vapier@gentoo.org> wrote: > On Sunday 19 July 2009 01:15:04 Garrett Cooper wrote: >> /bin/sh should remain the standard, but a number of changes need >> to happen to the .sh scripts to make them POSIX compatible, e.g. >> backticks execution should become $(), etc. Let's not make things >> bash-only... > > umm, `cmd` is in POSIX Not anymore; a fellow bourne shell-ist at work noted that it wasn't POSIX compliant anymore, after consulting the POSIX 2001 reference: http://publib.boulder.ibm.com/infocenter/systems/index.jsp?topic=/com.ibm.aix.baseadmn/doc/baseadmndita/korn_shell_comm_sub.htm Thanks, -Garrett ------------------------------------------------------------------------------ Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] ltp: IMA cross platform fixes 2009-07-19 5:35 ` Garrett Cooper @ 2009-07-19 5:48 ` Mike Frysinger 0 siblings, 0 replies; 10+ messages in thread From: Mike Frysinger @ 2009-07-19 5:48 UTC (permalink / raw) To: Garrett Cooper; +Cc: waqar afridi, ltp-list, Shaz, Mimi Zohar, ltp-list [-- Attachment #1.1: Type: text/plain, Size: 1216 bytes --] On Sunday 19 July 2009 01:35:22 Garrett Cooper wrote: > On Sat, Jul 18, 2009 at 10:26 PM, Mike Frysinger<vapier@gentoo.org> wrote: > > On Sunday 19 July 2009 01:15:04 Garrett Cooper wrote: > >> /bin/sh should remain the standard, but a number of changes need > >> to happen to the .sh scripts to make them POSIX compatible, e.g. > >> backticks execution should become $(), etc. Let's not make things > >> bash-only... > > > > umm, `cmd` is in POSIX > > Not anymore; a fellow bourne shell-ist at work noted that it > wasn't POSIX compliant anymore, after consulting the POSIX 2001 > reference: > > http://publib.boulder.ibm.com/infocenter/systems/index.jsp?topic=/com.ibm.a >ix.baseadmn/doc/baseadmndita/korn_shell_comm_sub.htm what ibm has to say on the topic is irrelevant, as does *ksh* documentation, as does outdated POSIX specs (2001 here). what is relevant is POSIX itself: http://www.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_06_03 $(...) is preferred style wise due to nesting capabilities, but that doesnt mean it isnt in the standard. i still prefer `...` in make scripts because it avoids having to do $$(...) to escape it for make. -mike [-- Attachment #1.2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 836 bytes --] [-- Attachment #2: Type: text/plain, Size: 389 bytes --] ------------------------------------------------------------------------------ Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge [-- Attachment #3: Type: text/plain, Size: 155 bytes --] _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] ltp: IMA cross platform fixes 2009-07-19 5:15 ` Garrett Cooper 2009-07-19 5:26 ` Mike Frysinger @ 2009-07-22 21:20 ` Mimi Zohar 2009-07-23 0:28 ` Mike Frysinger 1 sibling, 1 reply; 10+ messages in thread From: Mimi Zohar @ 2009-07-22 21:20 UTC (permalink / raw) To: Garrett Cooper; +Cc: waqar afridi, ltp-list, Shaz, Mike Frysinger On Sat, 2009-07-18 at 22:15 -0700, Garrett Cooper wrote: > On Thu, Jul 16, 2009 at 3:59 AM, Mimi Zohar<zohar@linux.vnet.ibm.com> wrote: > > - Instead of using the default platform shell, explicitly use bash. > > - To create a file using 'sudo -u', some platforms require 'user' to exist. > > - Document verifying PCR-10 fails on Ubuntu on reboot due to kexec. > > > > Signed-off-by: Mimi Zohar <zohar@us.ibm.com> > > < snip > > > Hi Mimi, > The change to > testcases/kernel/security/integrity/ima/tests/ima_measurements.sh, > minus the shebang change looks ok. > /bin/sh should remain the standard, but a number of changes need > to happen to the .sh scripts to make them POSIX compatible, e.g. > backticks execution should become $(), etc. Let's not make things > bash-only... > Thanks, > -Garrett Ok. I've removed the bash specific code to make it Posix compliant and ran Ubuntu's checkbashisms tool to make sure. Mimi ltp: IMA cross platform fixes - Replace bashisms: source, uid, substr, '&>' - redirection - To create a file using 'sudo -u', some platforms require 'user' to exist. - Document verifying PCR-10 fails on Ubuntu on reboot due to kexec. Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh =================================================================== --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh @@ -35,9 +35,10 @@ init() export TST_TOTAL=3 export TCID="init" export TST_COUNT=0 + RC=0 # check that sha1sum is installed - which sha1sum &> /dev/null || RC=$? + which sha1sum >/dev/null 2>&1 || RC=$? if [ $RC -ne 0 ]; then tst_brkm TBROK NULL "$TCID: sha1sum not found" return $RC @@ -137,12 +138,13 @@ test03() # create file user-test.txt mkdir -m 0700 $LTPIMA/user - chown 99.99 $LTPIMA/user + chown nobody.nobody $LTPIMA/user cd $LTPIMA/user hash=0 - # As user 99, create and cat the new file - sudo -u \#99 sh -c "echo `date` - create test.txt > ./test.txt; + # As user nobody, create and cat the new file + # (The LTP tests assumes existence of 'nobody'.) + sudo -u nobody sh -c "echo `date` - create test.txt > ./test.txt; cat ./test.txt > /dev/null" # Calculating the hash will add the measurement to the measurement @@ -176,9 +178,8 @@ test03() # RC=0 EXIT_VAL=0 -source `dirname $0`\/ima_setup.sh +. `dirname $0`\/ima_setup.sh setup || exit $RC - init test01 || EXIT_VAL=$RC test02 || EXIT_VAL=$RC Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_policy.sh =================================================================== --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_policy.sh +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_policy.sh @@ -70,7 +70,8 @@ load_policy() cat $1 | while read line ; do { - if [ "${line:0:1}" != "#" ] ; then + firstch=`expr substr "${line}" 1 1` + if [ "${firstch}" != "#" ] ; then echo $line >&4 2> /dev/null if [ $? -ne 0 ]; then exec 4>&- @@ -118,14 +119,13 @@ test02() load_policy $VALID_POLICY & p2=$! # forked process 2 wait "$p1"; RC1=$? wait "$p2"; RC2=$? - RC=$((`expr $RC1 + $RC2`)) - if [ $RC -eq 1 ]; then + if [ $RC1 -eq 0 ] && [ $RC2 -eq 0 ]; then + tst_res TFAIL $LTPTMP/imalog.$$\ + "$TCID: measurement policy opened concurrently" + elif [ $RC1 -eq 0 ] || [ $RC2 -eq 0 ]; then RC=0 tst_res TPASS $LTPTMP/imalog.$$\ "$TCID: replaced default measurement policy" - elif [ $RC -eq 0 ]; then - tst_res TFAIL $LTPTMP/imalog.$$\ - "$TCID: measurement policy opened concurrently" else tst_res TFAIL $LTPTMP/imalog.$$\ "$TCID: problems opening measurement policy" @@ -164,7 +164,7 @@ test03() RC=0 # Return value from setup, init, and test functions. EXIT_VAL=0 -source `dirname $0`\/ima_setup.sh +. `dirname $0`\/ima_setup.sh setup || exit $RC init || exit $RC Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_setup.sh =================================================================== --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_setup.sh +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_setup.sh @@ -46,7 +46,7 @@ mount_sysfs() mount_securityfs() { SECURITYFS=`mount | grep securityfs` || RC=$? - if [ $RC == 1 ]; then + if [ $RC -eq 1 ]; then SECURITYFS=$SYSFS/kernel/security `mkdir -p $SECURITYFS` `mount -t securityfs securityfs $SECURITYFS` @@ -77,7 +77,8 @@ setup() fi # Must be root - if [ $UID -ne 0 ]; then + userid=`id -u` + if [ $userid -ne 0 ]; then tst_brkm TBROK $LTPTMP/imalog.$$ \ "$TCID: Must be root to execute test" return 1 @@ -92,7 +93,7 @@ setup() # create the temporary directory used by this testcase LTPIMA=$LTPTMP/ima umask 077 - mkdir $LTPIMA &>/dev/null || RC=$? + mkdir $LTPIMA > /dev/null 2>&1 || RC=$? if [ $RC -ne 0 ]; then tst_brk TBROK "$TCID: Unable to create temporary directory" return $RC Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_tpm.sh =================================================================== --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_tpm.sh +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_tpm.sh @@ -37,7 +37,7 @@ init() RC=0 # verify ima_boot_aggregate is available - which ima_boot_aggregate &> /dev/null || RC=$? + which ima_boot_aggregate >/dev/null 2>&1 || RC=$? if [ $RC -ne 0 ]; then tst_res TINFO $LTPTMP/imalog.$$\ "$TCID: ima_tpm.sh test requires openssl-devel, skipping" @@ -45,7 +45,7 @@ init() fi # verify ima_measure is available - which ima_measure &> /dev/null || RC=$? + which ima_measure > /dev/null 2>&1 || RC=$? if [ $RC -ne 0 ]; then tst_res TINFO $LTPTMP/imalog.$$\ "$TCID: ima_tpm.sh test requires openssl-devel, skipping" @@ -60,10 +60,12 @@ test01() TCID="test01" TST_COUNT=1 RC=0 + zero="0000000000000000000000000000000000000000" # IMA boot aggregate ima_measurements=$SECURITYFS/ima/ascii_runtime_measurements read line < $ima_measurements + ima_aggr=`expr substr "${line}" 49 40` # verify TPM is available and enabled. tpm_bios=$SECURITYFS/tpm0/binary_bios_measurements @@ -71,7 +73,7 @@ test01() tst_res TINFO $LTPTMP/imalog.$$\ "$TCID: no TPM, TPM not builtin kernel, or TPM not enabled" - [ "${line:49:40}" -eq 0 ] || RC=$? + [ "${ima_aggr}" = "${zero}" ] || RC=$? if [ $RC -eq 0 ]; then tst_res TPASS $LTPTMP/imalog.$$\ "$TCID: bios boot aggregate is 0." @@ -81,8 +83,8 @@ test01() fi else boot_aggregate=`ima_boot_aggregate $tpm_bios` - - [ "${line:48:40}" == "${boot_aggregate:15:40}" ] || RC=$? + boot_aggr=`expr substr $boot_aggregate 16 40` + [ ${ima_aggr} = ${boot_aggr} ] || RC=$? if [ $RC -eq 0 ]; then tst_res TPASS $LTPTMP/imalog.$$\ "$TCID: bios aggregate matches IMA boot aggregate." @@ -103,10 +105,14 @@ validate_pcr() ima_measurements=$SECURITYFS/ima/binary_runtime_measurements aggregate_pcr=`ima_measure $ima_measurements --validate` dev_pcrs=$1 + RC=0 + while read line ; do - if [ "${line:0:6}" == "PCR-10" ]; then - [ "${line:8:59}" == "${aggregate_pcr:25:59}" ] - RC=$? + pcr=`expr substr "${line}" 1 6` + if [ "${pcr}" = "PCR-10" ]; then + aggr=`expr substr "${aggregate_pcr}" 26 59` + pcr=`expr substr "${line}" 9 59` + [ "${pcr}" = "${aggr}" ] || RC=$? fi done < $dev_pcrs return $RC @@ -172,7 +178,7 @@ RC=0 # Return value from setup, and t EXIT_VAL=0 # set the testcases/bin directory -source `dirname $0`\/ima_setup.sh +. `dirname $0`\/ima_setup.sh setup || exit $RC init || exit $RC Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_violations.sh =================================================================== --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/tests/ima_violations.sh +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/tests/ima_violations.sh @@ -64,7 +64,12 @@ init() export TST_COUNT=0 RC=0 - service auditd status &> /dev/null || RC=$? + if [ -f /etc/init.d/auditd ]; then + service auditd status > /dev/null 2>&1 || RC=$? + else + RC=$? + fi + if [ $RC -ne 0 ]; then log=/var/log/messages else @@ -97,12 +102,15 @@ test01() grep 1>/dev/null 'open_writers' || RC=$? if [ $RC -eq 0 ]; then tst_res TPASS $LTPTMP/imalog.$$\ - "$TCID: open_writers violation added" + "$TCID: open_writers violation added(test.txt-$$)" return $RC + else + tst_res TINFO $LTPTMP/imalog.$$\ + "$TCID: (message ratelimiting?)" fi fi tst_res TFAIL $LTPTMP/imalog.$$\ - "$TCID: open_writers violation not added" + "$TCID: open_writers violation not added(test.txt-$$)" return $RC } @@ -129,11 +137,15 @@ test02() grep 'ToMToU' 1>/dev/null || RC=$? if [ $RC -eq 0 ]; then tst_res TPASS $LTPTMP/imalog.$$\ - "$TCID: ToMToU violation added" + "$TCID: ToMToU violation added(test.txt-$$)" return $RC + else + tst_res TINFO $LTPTMP/imalog.$$\ + "$TCID: (message ratelimiting?)" fi fi - tst_res TFAIL $LTPTMP/imalog.$$ "$TCID: ToMToU violation not added" + tst_res TFAIL $LTPTMP/imalog.$$\ + "$TCID: ToMToU violation not added(test.txt-$$)" return $RC } @@ -161,12 +173,15 @@ test03() grep 1>/dev/null 'open_writers' || RC=$? if [ $RC -eq 0 ]; then tst_res TPASS $LTPTMP/imalog.$$\ - "$TCID: mmapped open_writers violation added" + "$TCID: mmapped open_writers violation added(test.txtb-$$)" return $RC + else + tst_res TINFO $LTPTMP/imalog.$$\ + "$TCID: (message ratelimiting?)" fi fi tst_res TFAIL $LTPTMP/imalog.$$\ - "$TCID: mmapped open_writers violation not added" + "$TCID: mmapped open_writers violation not added(test.txtb-$$)" close_file_read return $RC } @@ -181,9 +196,8 @@ test03() RC=0 # Return value from setup, init, and test functions. EXIT_VAL=0 -source `dirname $0`\/ima_setup.sh +. `dirname $0`\/ima_setup.sh setup || exit $RC - init || exit $RC test01 || EXIT_VAL=$RC test02 || EXIT_VAL=$RC Index: ltp-full-20090531/testcases/kernel/security/integrity/ima/README =================================================================== --- ltp-full-20090531.orig/testcases/kernel/security/integrity/ima/README +++ ltp-full-20090531/testcases/kernel/security/integrity/ima/README @@ -56,7 +56,8 @@ Run tests --------- After doing 'make' and 'make install' from the top-level, - execute './ltp-full-<version>/runltp -f ima' to run the entire testsuite. -- To run individual tests, cd into the IMA directory: +- To run individual tests, cd into the IMA directory, and add testcases/bin + to PATH: ./ltp-full-<version>/testcases/kernel/security/integrity/ima/tests/ and execute the individual scripts. ------------------------------------------------------------------------------ _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] ltp: IMA cross platform fixes 2009-07-22 21:20 ` Mimi Zohar @ 2009-07-23 0:28 ` Mike Frysinger 2009-07-23 11:07 ` Mimi Zohar 0 siblings, 1 reply; 10+ messages in thread From: Mike Frysinger @ 2009-07-23 0:28 UTC (permalink / raw) To: Mimi Zohar; +Cc: ltp-list, Shaz, waqar afridi [-- Attachment #1.1: Type: text/plain, Size: 1513 bytes --] On Wednesday 22 July 2009 17:20:19 Mimi Zohar wrote: > testcases/kernel/security/integrity/ima/tests/ima_policy.sh > > - if [ "${line:0:1}" != "#" ] ; then > + firstch=`expr substr "${line}" 1 1` > + if [ "${firstch}" != "#" ] ; then the `expr` util, while pretty flexible, tends to not get used. so it'll probably be easier for people to grok: if [ "${line#\#}" = "${line}" ] ; then > - RC=$((`expr $RC1 + $RC2`)) > - if [ $RC -eq 1 ]; then > + if [ $RC1 -eq 0 ] && [ $RC2 -eq 0 ]; then i dont see what was wrong with the original here, but if you really want to rewrite this, then just change the one line to: RC=$((RC1 + RC2)) > testcases/kernel/security/integrity/ima/tests/ima_tpm.sh > > + zero="0000000000000000000000000000000000000000" > > + ima_aggr=`expr substr "${line}" 49 40` > > - [ "${line:49:40}" -eq 0 ] || RC=$? > + [ "${ima_aggr}" = "${zero}" ] || RC=$? these changes arent exactly equivalent. if the subst of line only returned say 5 zeros, then your check wouldnt work. do you even need this ? simply changing the line to ima_aggr via substr looks good enough to me. this should work fine in POSIX shells: [ "00000" -eq 0 ] > testcases/kernel/security/integrity/ima/tests/ima_violations.sh > > + tst_res TINFO $LTPTMP/imalog.$$\ > + "$TCID: (message ratelimiting?)" this shows up a few times in the patch ... if you're going to line wrap things, there needs to be a space before the continuation marker for style. -mike [-- Attachment #1.2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 836 bytes --] [-- Attachment #2: Type: text/plain, Size: 79 bytes --] ------------------------------------------------------------------------------ [-- Attachment #3: Type: text/plain, Size: 155 bytes --] _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] ltp: IMA cross platform fixes 2009-07-23 0:28 ` Mike Frysinger @ 2009-07-23 11:07 ` Mimi Zohar 2009-07-30 18:29 ` Subrata Modak 0 siblings, 1 reply; 10+ messages in thread From: Mimi Zohar @ 2009-07-23 11:07 UTC (permalink / raw) To: Mike Frysinger; +Cc: ltp-list, Shaz, waqar afridi On Wed, 2009-07-22 at 20:28 -0400, Mike Frysinger wrote: > On Wednesday 22 July 2009 17:20:19 Mimi Zohar wrote: > > testcases/kernel/security/integrity/ima/tests/ima_policy.sh > > > > - if [ "${line:0:1}" != "#" ] ; then > > + firstch=`expr substr "${line}" 1 1` > > + if [ "${firstch}" != "#" ] ; then > > the `expr` util, while pretty flexible, tends to not get used. so it'll > probably be easier for people to grok: > if [ "${line#\#}" = "${line}" ] ; then Other than the comparison needing to be '!=', this works. Thanks! > > - RC=$((`expr $RC1 + $RC2`)) > > - if [ $RC -eq 1 ]; then > > + if [ $RC1 -eq 0 ] && [ $RC2 -eq 0 ]; then > > i dont see what was wrong with the original here, but if you really want to > rewrite this, then just change the one line to: > RC=$((RC1 + RC2)) The test opens the policy file and attempts to open it again, while it is still open. The test now explicitly checks the return code from both opens. The return code from both opens shouldn't be 0. > > testcases/kernel/security/integrity/ima/tests/ima_tpm.sh > > > > + zero="0000000000000000000000000000000000000000" > > > > + ima_aggr=`expr substr "${line}" 49 40` > > > > - [ "${line:49:40}" -eq 0 ] || RC=$? > > + [ "${ima_aggr}" = "${zero}" ] || RC=$? > > these changes arent exactly equivalent. if the subst of line only returned > say 5 zeros, then your check wouldnt work. do you even need this ? simply > changing the line to ima_aggr via substr looks good enough to me. this should > work fine in POSIX shells: > [ "00000" -eq 0 ] Although the statements aren't equivalent, the current check is more correct. If the TPM is not enabled, the first entry in /sys/kernel/security/ascii_runtime, the boot aggregate, will be a string of zeroes. > > testcases/kernel/security/integrity/ima/tests/ima_violations.sh > > > > + tst_res TINFO $LTPTMP/imalog.$$\ > > + "$TCID: (message ratelimiting?)" > > this shows up a few times in the patch ... if you're going to line wrap > things, there needs to be a space before the continuation marker for style. > -mike Ok. Thanks! Mimi ------------------------------------------------------------------------------ _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] ltp: IMA cross platform fixes 2009-07-23 11:07 ` Mimi Zohar @ 2009-07-30 18:29 ` Subrata Modak 0 siblings, 0 replies; 10+ messages in thread From: Subrata Modak @ 2009-07-30 18:29 UTC (permalink / raw) To: Mimi Zohar; +Cc: waqar afridi, ltp-list, Shaz, Mike Frysinger On Thu, 2009-07-23 at 07:07 -0400, Mimi Zohar wrote: > On Wed, 2009-07-22 at 20:28 -0400, Mike Frysinger wrote: > > On Wednesday 22 July 2009 17:20:19 Mimi Zohar wrote: > > > testcases/kernel/security/integrity/ima/tests/ima_policy.sh > > > > > > - if [ "${line:0:1}" != "#" ] ; then > > > + firstch=`expr substr "${line}" 1 1` > > > + if [ "${firstch}" != "#" ] ; then > > > > the `expr` util, while pretty flexible, tends to not get used. so it'll > > probably be easier for people to grok: > > if [ "${line#\#}" = "${line}" ] ; then > > Other than the comparison needing to be '!=', this works. Thanks! > > > > - RC=$((`expr $RC1 + $RC2`)) > > > - if [ $RC -eq 1 ]; then > > > + if [ $RC1 -eq 0 ] && [ $RC2 -eq 0 ]; then > > > > i dont see what was wrong with the original here, but if you really want to > > rewrite this, then just change the one line to: > > RC=$((RC1 + RC2)) > > The test opens the policy file and attempts to open it again, while it > is still open. The test now explicitly checks the return code from both > opens. The return code from both opens shouldn't be 0. > > > > testcases/kernel/security/integrity/ima/tests/ima_tpm.sh > > > > > > + zero="0000000000000000000000000000000000000000" > > > > > > + ima_aggr=`expr substr "${line}" 49 40` > > > > > > - [ "${line:49:40}" -eq 0 ] || RC=$? > > > + [ "${ima_aggr}" = "${zero}" ] || RC=$? > > > > these changes arent exactly equivalent. if the subst of line only returned > > say 5 zeros, then your check wouldnt work. do you even need this ? simply > > changing the line to ima_aggr via substr looks good enough to me. this should > > work fine in POSIX shells: > > [ "00000" -eq 0 ] > > Although the statements aren't equivalent, the current check is more > correct. If the TPM is not enabled, the first entry > in /sys/kernel/security/ascii_runtime, the boot aggregate, will be a > string of zeroes. > > > > testcases/kernel/security/integrity/ima/tests/ima_violations.sh > > > > > > + tst_res TINFO $LTPTMP/imalog.$$\ > > > + "$TCID: (message ratelimiting?)" > > > > this shows up a few times in the patch ... if you're going to line wrap > > things, there needs to be a space before the continuation marker for style. > > -mike > > Ok. > > Thanks! Mimi, Did you send any update on this anymore ? Regards-- Subrata > > Mimi > > > ------------------------------------------------------------------------------ > _______________________________________________ > Ltp-list mailing list > Ltp-list@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ltp-list ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] ltp: IMA cross platform fixes 2009-07-16 10:59 [LTP] ltp: IMA cross platform fixes Mimi Zohar 2009-07-19 5:15 ` Garrett Cooper @ 2009-07-19 5:26 ` Mike Frysinger 1 sibling, 0 replies; 10+ messages in thread From: Mike Frysinger @ 2009-07-19 5:26 UTC (permalink / raw) To: ltp-list; +Cc: waqar afridi, ltp-list, Shaz, Mimi Zohar [-- Attachment #1.1: Type: text/plain, Size: 175 bytes --] On Thursday 16 July 2009 06:59:56 Mimi Zohar wrote: > - Instead of using the default platform shell, explicitly use bash. no, please fix the script in question instead -mike [-- Attachment #1.2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 836 bytes --] [-- Attachment #2: Type: text/plain, Size: 389 bytes --] ------------------------------------------------------------------------------ Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge [-- Attachment #3: Type: text/plain, Size: 155 bytes --] _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2009-07-30 18:29 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-07-16 10:59 [LTP] ltp: IMA cross platform fixes Mimi Zohar 2009-07-19 5:15 ` Garrett Cooper 2009-07-19 5:26 ` Mike Frysinger 2009-07-19 5:35 ` Garrett Cooper 2009-07-19 5:48 ` Mike Frysinger 2009-07-22 21:20 ` Mimi Zohar 2009-07-23 0:28 ` Mike Frysinger 2009-07-23 11:07 ` Mimi Zohar 2009-07-30 18:29 ` Subrata Modak 2009-07-19 5:26 ` Mike Frysinger
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.