From: Alexey Fisher <bug-track@fisher-privat.net>
To: alsa-devel@alsa-project.org
Subject: line-in on Intel DG45ID
Date: Mon, 30 Nov 2009 09:06:40 +0100 [thread overview]
Message-ID: <1259568400.4835.25.camel@zwerg> (raw)
Hi,
i recently tried to digitalise some tapes and found line-in not enabled
on my board (Intel DG45ID). (Codec: IDT 92HD73E1X5)
>From the board documentation i know blue jack used for line-in or side
surround. Even i use normal stereo i can't enable line-in.
So my question, is it really to make a switch between surround and
stereo with line-in? I know it should be possible. Or to have this
switch for mic input?
regards,
Alexey
ps: cat /proc/asound/card0/codec#2
Codec: IDT 92HD73E1X5
Address: 2
Function Id: 0x1
Vendor Id: 0x111d7676
Subsystem Id: 0x80865002
Revision Id: 0x100202
No Modem Function Group found
Default PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=8, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Power-Map: 0x65
Analog Loopback: 0x00
Node 0x0a [Pin Complex] wcaps 0x400183: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x0221401f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=01, enabled=1
Connection: 6
0x15 0x16 0x17 0x18 0x19* 0x1e
Node 0x0b [Pin Complex] wcaps 0x400183: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x02a19020: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=03, enabled=1
Connection: 6
0x15* 0x16 0x17 0x18 0x19 0x1e
Node 0x0c [Pin Complex] wcaps 0x400183: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01113014: [Jack] Speaker at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x1, Sequence = 0x4
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=04, enabled=1
Connection: 6
0x15 0x16 0x17 0x18* 0x19 0x1e
Node 0x0d [Pin Complex] wcaps 0x400183: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
Pin Default 0x01114010: [Jack] Speaker at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=05, enabled=1
Connection: 6
0x15* 0x16 0x17 0x18 0x19 0x1e
Node 0x0e [Pin Complex] wcaps 0x400183: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01a19030: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Connection: 6
0x15* 0x16 0x17 0x18 0x19 0x1e
Node 0x0f [Pin Complex] wcaps 0x400183: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00000037: IN OUT Detect Trigger ImpSense
Pin Default 0x01111012: [Jack] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x2
Pin-ctls: 0x40: OUT
Unsolicited: tag=06, enabled=1
Connection: 6
0x15 0x16* 0x17 0x18 0x19 0x1e
Node 0x10 [Pin Complex] wcaps 0x400183: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00000037: IN OUT Detect Trigger ImpSense
Pin Default 0x01116011: [Jack] Speaker at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0x1, Sequence = 0x1
Pin-ctls: 0x40: OUT
Unsolicited: tag=07, enabled=1
Connection: 6
0x15 0x16 0x17* 0x18 0x19 0x1e
Node 0x11 [Pin Complex] wcaps 0x400183: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00000037: IN OUT Detect Trigger ImpSense
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Connection: 6
0x15* 0x16 0x17 0x18 0x19 0x1e
Node 0x12 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Node 0x13 [Pin Complex] wcaps 0x400003: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x20: IN
Node 0x14 [Pin Complex] wcaps 0x400003: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x20: IN
Node 0x15 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0x69 0x69]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x16 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0xe9 0xe9]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x17 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0x69 0x69]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x18 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x19 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0x69 0x69]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x1a [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x20
Processing caps: benign=0, ncoeff=0
Node 0x1b [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x21
Processing caps: benign=0, ncoeff=0
Node 0x1c [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
Amp-Out vals: [0x00]
Node 0x1d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97
0x97]
Connection: 5
0x28 0x29 0x2a 0x2b 0x12
Node 0x1e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x9f 0x9f]
Connection: 1
0x1d
Node 0x1f [Volume Knob Widget] wcaps 0x600000: Mono
Volume-Knob: delta=1, steps=127, direct=1, val=127
Connection: 5
0x15 0x16 0x17 0x18 0x19
Node 0x20 [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x05 0x05]
Connection: 12
0x0a 0x0b 0x0c 0x0d 0x0e* 0x0f 0x10 0x11 0x12 0x13 0x14 0x1d
Node 0x21 [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 12
0x0a 0x0b 0x0c 0x0d 0x0e* 0x0f 0x10 0x11 0x12 0x13 0x14 0x1d
Node 0x22 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Connection: 3
0x25* 0x20 0x21
Node 0x23 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x01451140: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black
DefAssociation = 0x4, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 3
0x26* 0x20 0x21
Node 0x24 [Pin Complex] wcaps 0x400681: Stereo Digital
Pincap 0x00010024: IN EAPD Detect
EAPD 0x0:
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Node 0x25 [Audio Output] wcaps 0x4021d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Node 0x26 [Audio Output] wcaps 0x4021d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Node 0x27 [Audio Input] wcaps 0x14031b: Stereo Digital Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Connection: 1
0x24
Node 0x28 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0a* 0x0b 0x0d 0x0f
Node 0x29 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0a* 0x0e 0x10 0x11
Node 0x2a [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0b* 0x0c 0x10 0x11
Node 0x2b [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x15* 0x16 0x17 0x18
next reply other threads:[~2009-11-30 8:06 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-30 8:06 Alexey Fisher [this message]
2009-12-01 15:03 ` line-in on Intel DG45ID Takashi Iwai
2009-12-01 15:45 ` Alexey Fisher
2009-12-01 15:49 ` Takashi Iwai
2009-12-02 10:30 ` Alexey Fisher
2009-12-05 22:14 ` Alexey Fisher
2009-12-06 3:47 ` Paulo Cavalcanti
2009-12-06 10:01 ` Alexey Fisher
2009-12-06 10:14 ` [PATCH] Introduce config for intel dg45id board Alexey Fisher
2009-12-06 10:29 ` [PATCH v2] " Alexey Fisher
2009-12-08 11:04 ` Takashi Iwai
2009-12-08 13:02 ` Alexey Fisher
2009-12-08 13:15 ` Takashi Iwai
[not found] ` <1260289818.5210.59.camel@mini>
2009-12-08 16:39 ` Takashi Iwai
2009-12-08 20:12 ` Alexey Fisher
2009-12-08 20:38 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1259568400.4835.25.camel@zwerg \
--to=bug-track@fisher-privat.net \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.