Re: line-in on Intel DG45ID

[Alexey Fisher <bug-track@fisher-privat.net>]

[-- Attachment #1: Type: text/plain, Size: 1168 bytes --]

Am Dienstag, den 01.12.2009, 16:03 +0100 schrieb Takashi Iwai:
> At Mon, 30 Nov 2009 09:06:40 +0100,
> Alexey Fisher wrote:
> > 
> > Hi,
> > i recently tried to digitalise some tapes and found line-in not enabled
> > on my board (Intel DG45ID). (Codec: IDT 92HD73E1X5)
> > >From the board documentation i know  blue jack used for line-in or side
> > surround. Even i use normal stereo i can't enable line-in.
> > 
> > So my question, is it really to make a switch between surround and
> > stereo with line-in? I know it should be possible. Or to have this
> > switch for mic input?
> 
> Which ALSA driver version are you using?
> 
> The very latest one should have a "Line Jack Mode", with which you
> can change the input/output via enum control.

i use recent alsa-kernel.git, i found this switch. Currently i trying to
dig deeper in the code. Seems like this board is not really supported...
for normal tasks like stereo in / stereo out - is ok, but surround seems
to be messed up, mixer map too.
For example: "speaker-test -c 6" will produce "Front L/R" on all jacks.
Currently tested models intel, bios and ref..  nothing solve all issues.

Do you have any tips?

[-- Attachment #2: codec#2.svg --]
[-- Type: image/svg+xml, Size: 89242 bytes --]

[-- Attachment #3: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel