From: Ben Dooks <ben-linux@fluff.org>
To: ben-linux@fluff.org, laforge@gnumonks.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: [clocks] ARM: S3C64XX: Cleanup common init code in s3c6400-clock.c
Date: Tue, 1 Dec 2009 01:43:08 +0000 [thread overview]
Message-ID: <1259631793-25480-3-git-send-email-ben-linux@fluff.org> (raw)
In-Reply-To: <1259631793-25480-1-git-send-email-ben-linux@fluff.org>
Remove the four fields from clksrc_clk.clk which are always the same
and init them when the clock is registered. This helps remove the amount
of repeated code.
This is a re-work of Harald Welte's clock changes for the latest kernel.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/plat-s3c64xx/s3c6400-clock.c | 49 +++-----------------------------
1 files changed, 5 insertions(+), 44 deletions(-)
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 6ffa21e..5882470 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -364,10 +364,6 @@ static struct clksrc_clk clk_mmc0 = {
.id = 0,
.ctrlbit = S3C_CLKCON_SCLK_MMC0,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_MMC0_SHIFT,
.mask = S3C6400_CLKSRC_MMC0_MASK,
@@ -382,10 +378,6 @@ static struct clksrc_clk clk_mmc1 = {
.id = 1,
.ctrlbit = S3C_CLKCON_SCLK_MMC1,
.enable = s3c64xx_sclk_ctrl,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .set_parent = s3c64xx_setparent_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_MMC1_SHIFT,
.mask = S3C6400_CLKSRC_MMC1_MASK,
@@ -400,10 +392,6 @@ static struct clksrc_clk clk_mmc2 = {
.id = 2,
.ctrlbit = S3C_CLKCON_SCLK_MMC2,
.enable = s3c64xx_sclk_ctrl,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .set_parent = s3c64xx_setparent_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_MMC2_SHIFT,
.mask = S3C6400_CLKSRC_MMC2_MASK,
@@ -418,10 +406,6 @@ static struct clksrc_clk clk_usbhost = {
.id = -1,
.ctrlbit = S3C_CLKCON_SCLK_UHOST,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_UHOST_SHIFT,
.mask = S3C6400_CLKSRC_UHOST_MASK,
@@ -436,10 +420,6 @@ static struct clksrc_clk clk_uart_uclk1 = {
.id = -1,
.ctrlbit = S3C_CLKCON_SCLK_UART,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_UART_SHIFT,
.mask = S3C6400_CLKSRC_UART_MASK,
@@ -456,10 +436,6 @@ static struct clksrc_clk clk_spi0 = {
.id = 0,
.ctrlbit = S3C_CLKCON_SCLK_SPI0,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_SPI0_SHIFT,
.mask = S3C6400_CLKSRC_SPI0_MASK,
@@ -474,10 +450,6 @@ static struct clksrc_clk clk_spi1 = {
.id = 1,
.ctrlbit = S3C_CLKCON_SCLK_SPI1,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_SPI1_SHIFT,
.mask = S3C6400_CLKSRC_SPI1_MASK,
@@ -520,10 +492,6 @@ static struct clksrc_clk clk_audio0 = {
.id = 0,
.ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_AUDIO0_SHIFT,
.mask = S3C6400_CLKSRC_AUDIO0_MASK,
@@ -551,10 +519,6 @@ static struct clksrc_clk clk_audio1 = {
.id = 1,
.ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_AUDIO1_SHIFT,
.mask = S3C6400_CLKSRC_AUDIO1_MASK,
@@ -569,10 +533,6 @@ static struct clksrc_clk clk_irda = {
.id = 0,
.ctrlbit = S3C_CLKCON_SCLK_IRDA,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_IRDA_SHIFT,
.mask = S3C6400_CLKSRC_IRDA_MASK,
@@ -596,10 +556,6 @@ static struct clksrc_clk clk_camif = {
.id = -1,
.ctrlbit = S3C_CLKCON_SCLK_CAM,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = 0,
.mask = 0,
@@ -641,6 +597,11 @@ static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
return;
}
+ clk->clk.get_rate = s3c64xx_getrate_clksrc;
+ clk->clk.set_rate = s3c64xx_setrate_clksrc;
+ clk->clk.set_parent = s3c64xx_setparent_clksrc;
+ clk->clk.round_rate = s3c64xx_roundrate_clksrc;
+
clk->clk.parent = srcs->sources[clksrc];
printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
--
1.5.6.5
WARNING: multiple messages have this Message-ID (diff)
From: ben-linux@fluff.org (Ben Dooks)
To: linux-arm-kernel@lists.infradead.org
Subject: [clocks] ARM: S3C64XX: Cleanup common init code in s3c6400-clock.c
Date: Tue, 1 Dec 2009 01:43:08 +0000 [thread overview]
Message-ID: <1259631793-25480-3-git-send-email-ben-linux@fluff.org> (raw)
In-Reply-To: <1259631793-25480-1-git-send-email-ben-linux@fluff.org>
Remove the four fields from clksrc_clk.clk which are always the same
and init them when the clock is registered. This helps remove the amount
of repeated code.
This is a re-work of Harald Welte's clock changes for the latest kernel.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/plat-s3c64xx/s3c6400-clock.c | 49 +++-----------------------------
1 files changed, 5 insertions(+), 44 deletions(-)
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 6ffa21e..5882470 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -364,10 +364,6 @@ static struct clksrc_clk clk_mmc0 = {
.id = 0,
.ctrlbit = S3C_CLKCON_SCLK_MMC0,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_MMC0_SHIFT,
.mask = S3C6400_CLKSRC_MMC0_MASK,
@@ -382,10 +378,6 @@ static struct clksrc_clk clk_mmc1 = {
.id = 1,
.ctrlbit = S3C_CLKCON_SCLK_MMC1,
.enable = s3c64xx_sclk_ctrl,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .set_parent = s3c64xx_setparent_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_MMC1_SHIFT,
.mask = S3C6400_CLKSRC_MMC1_MASK,
@@ -400,10 +392,6 @@ static struct clksrc_clk clk_mmc2 = {
.id = 2,
.ctrlbit = S3C_CLKCON_SCLK_MMC2,
.enable = s3c64xx_sclk_ctrl,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .set_parent = s3c64xx_setparent_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_MMC2_SHIFT,
.mask = S3C6400_CLKSRC_MMC2_MASK,
@@ -418,10 +406,6 @@ static struct clksrc_clk clk_usbhost = {
.id = -1,
.ctrlbit = S3C_CLKCON_SCLK_UHOST,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_UHOST_SHIFT,
.mask = S3C6400_CLKSRC_UHOST_MASK,
@@ -436,10 +420,6 @@ static struct clksrc_clk clk_uart_uclk1 = {
.id = -1,
.ctrlbit = S3C_CLKCON_SCLK_UART,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_UART_SHIFT,
.mask = S3C6400_CLKSRC_UART_MASK,
@@ -456,10 +436,6 @@ static struct clksrc_clk clk_spi0 = {
.id = 0,
.ctrlbit = S3C_CLKCON_SCLK_SPI0,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_SPI0_SHIFT,
.mask = S3C6400_CLKSRC_SPI0_MASK,
@@ -474,10 +450,6 @@ static struct clksrc_clk clk_spi1 = {
.id = 1,
.ctrlbit = S3C_CLKCON_SCLK_SPI1,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_SPI1_SHIFT,
.mask = S3C6400_CLKSRC_SPI1_MASK,
@@ -520,10 +492,6 @@ static struct clksrc_clk clk_audio0 = {
.id = 0,
.ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_AUDIO0_SHIFT,
.mask = S3C6400_CLKSRC_AUDIO0_MASK,
@@ -551,10 +519,6 @@ static struct clksrc_clk clk_audio1 = {
.id = 1,
.ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_AUDIO1_SHIFT,
.mask = S3C6400_CLKSRC_AUDIO1_MASK,
@@ -569,10 +533,6 @@ static struct clksrc_clk clk_irda = {
.id = 0,
.ctrlbit = S3C_CLKCON_SCLK_IRDA,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_IRDA_SHIFT,
.mask = S3C6400_CLKSRC_IRDA_MASK,
@@ -596,10 +556,6 @@ static struct clksrc_clk clk_camif = {
.id = -1,
.ctrlbit = S3C_CLKCON_SCLK_CAM,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = 0,
.mask = 0,
@@ -641,6 +597,11 @@ static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
return;
}
+ clk->clk.get_rate = s3c64xx_getrate_clksrc;
+ clk->clk.set_rate = s3c64xx_setrate_clksrc;
+ clk->clk.set_parent = s3c64xx_setparent_clksrc;
+ clk->clk.round_rate = s3c64xx_roundrate_clksrc;
+
clk->clk.parent = srcs->sources[clksrc];
printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
--
1.5.6.5
next prev parent reply other threads:[~2009-12-01 1:42 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-01 1:43 Samsung clock changes Ben Dooks
2009-12-01 1:43 ` Ben Dooks
2009-12-01 1:43 ` [clocks] ARM: SAMSUNG: Move <plat/clock.h> to plat-samsung Ben Dooks
2009-12-01 1:43 ` Ben Dooks
2009-12-01 1:43 ` Ben Dooks [this message]
2009-12-01 1:43 ` [clocks] ARM: S3C64XX: Cleanup common init code in s3c6400-clock.c Ben Dooks
2009-12-01 1:43 ` [clocks] ARM: S3C64XX: Compress s3c6400-clock.c code Ben Dooks
2009-12-01 1:43 ` Ben Dooks
2009-12-01 1:43 ` [clocks] ARM: SAMSUNG: Add core clock implementation for clksrc based clocks Ben Dooks
2009-12-01 1:43 ` Ben Dooks
2009-12-01 1:43 ` [clocks] ARM: S3C64XX: Use new clock-clksrc.c code for clocks Ben Dooks
2009-12-01 1:43 ` Ben Dooks
2009-12-01 9:48 ` Kyungmin Park
2009-12-01 9:48 ` Kyungmin Park
2009-12-01 11:10 ` Ben Dooks
2009-12-01 11:10 ` Ben Dooks
2009-12-01 1:43 ` [clocks] ARM: S3C64XX: Remove unused clock definitions from clock header Ben Dooks
2009-12-01 1:43 ` Ben Dooks
2009-12-01 1:43 ` [clocks] ARM: SAMSUNG: Reduce size of struct clk Ben Dooks
2009-12-01 1:43 ` Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1259631793-25480-3-git-send-email-ben-linux@fluff.org \
--to=ben-linux@fluff.org \
--cc=laforge@gnumonks.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.