* Re: mmotm-2009-12-08-17-45 resume slowly [not found] <a8e1da0912100127k4dcddd65gfe5ff0b1330fe63b@mail.gmail.com> @ 2009-12-10 9:30 ` Dave Young 2009-12-10 9:52 ` KOSAKI Motohiro 0 siblings, 1 reply; 16+ messages in thread From: Dave Young @ 2009-12-10 9:30 UTC (permalink / raw) To: Andrew Morton; +Cc: Linux Kernel Mailing List Sorry forgot cc list On Thu, Dec 10, 2009 at 5:27 PM, Dave Young <hidave.darkstar@gmail.com> wrote: > Hi, > > With rencent mm patch sets (since 2.6.32), the resume is too slow with > screen being black over 5 minutes > > (Dell e5400 with intel graphic card) > > Here is the full dmesg: > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.32-mm1 (dave@darkstar) (gcc version > 4.2.4) #5 SMP Thu Dec 10 15:23:34 CST 2009 > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) > [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000003d38d400 (usable) > [ 0.000000] BIOS-e820: 000000003d38d400 - 000000003d38f400 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000003d38f400 - 0000000040000000 (reserved) > [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) > [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) > [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) > [ 0.000000] BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved) > [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU > or disabled in BIOS! > [ 0.000000] DMI 2.4 present. > [ 0.000000] last_pfn = 0x3d38d max_arch_pfn = 0x100000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-BFFFF uncachable > [ 0.000000] C0000-CFFFF write-protect > [ 0.000000] D0000-EFFFF uncachable > [ 0.000000] F0000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 000000000 mask C00000000 write-back > [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable > [ 0.000000] 2 base 03DC00000 mask FFFC00000 uncachable > [ 0.000000] 3 base 03E000000 mask FFE000000 uncachable > [ 0.000000] 4 base 03DB00000 mask FFFF00000 uncachable > [ 0.000000] 5 disabled > [ 0.000000] 6 disabled > [ 0.000000] 7 disabled > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > [ 0.000000] e820 update range: 000000003db00000 - 0000000040000000 > (usable) ==> (reserved) > [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 > (usable) ==> (reserved) > [ 0.000000] initial memory mapped : 0 - 02000000 > [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 > [ 0.000000] 0000000000 - 0000400000 page 4k > [ 0.000000] 0000400000 - 0037400000 page 2M > [ 0.000000] 0037400000 - 00377fe000 page 4k > [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 > [ 0.000000] ACPI: RSDP 000fbce0 00024 (v02 DELL ) > [ 0.000000] ACPI: XSDT 3d391e00 00064 (v01 DELL M09 27D9041D > ASL 00000061) > [ 0.000000] ACPI: FACP 3d391c9c 000F4 (v04 DELL M09 27D9041D > ASL 00000061) > [ 0.000000] ACPI: DSDT 3d392400 06857 (v02 INT430 SYSFexxx 00001001 > INTL 20050624) > [ 0.000000] ACPI: FACS 3d3a0c00 00040 > [ 0.000000] ACPI: HPET 3d391f00 00038 (v01 DELL M09 00000001 > ASL 00000061) > [ 0.000000] ACPI: DMAR 3d3a0400 000F8 (v01 DELL M09 27D9041D > ASL 00000061) > [ 0.000000] ACPI: APIC 3d392000 00068 (v01 DELL M09 27D9041D > ASL 00000047) > [ 0.000000] ACPI: ASF! 3d391c00 00076 (v32 DELL M09 27D9041D > ASL 00000061) > [ 0.000000] ACPI: MCFG 3d391fc0 0003E (v16 DELL M09 27D9041D > ASL 00000061) > [ 0.000000] ACPI: TCPA 3d392300 00032 (v01 00000000 > ASL 00000000) > [ 0.000000] ACPI: SSDT 3d3902e7 0066C (v01 PmRef CpuPm 00003000 > INTL 20050624) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] 91MB HIGHMEM available. > [ 0.000000] 887MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 377fe000 > [ 0.000000] low ram: 0 - 377fe000 > [ 0.000000] node 0 low ram: 00000000 - 377fe000 > [ 0.000000] node 0 bootmap 00008000 - 0000ef00 > [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> > [0000000000 - 0000001000] > [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> > [0000001000 - 0000002000] > [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> > [0000006000 - 0000007000] > [ 0.000000] #3 [0001000000 - 0001c1ed78] TEXT DATA BSS ==> > [0001000000 - 0001c1ed78] > [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> > [000009f000 - 0000100000] > [ 0.000000] #5 [0001c1f000 - 0001c27184] BRK ==> > [0001c1f000 - 0001c27184] > [ 0.000000] #6 [0000002000 - 0000006000] ACPI WAKEUP ==> > [0000002000 - 0000006000] > [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> > [0000007000 - 0000008000] > [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> > [0000008000 - 000000f000] > [ 0.000000] sizeof(struct page) = 32 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000000 -> 0x00001000 > [ 0.000000] Normal 0x00001000 -> 0x000377fe > [ 0.000000] HighMem 0x000377fe -> 0x0003d38d > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0x00000000 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x0003d38d > [ 0.000000] On node 0 totalpages: 250668 > [ 0.000000] Node 0 memmap at 0xc1c29000 size 8028160 first pfn 0xc1c29000 > [ 0.000000] free_area_init_node: node 0, pgdat c162db40, > node_mem_map c1c29000 > [ 0.000000] DMA zone: 32 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 > [ 0.000000] Normal zone: 1744 pages used for memmap > [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 > [ 0.000000] HighMem zone: 184 pages used for memmap > [ 0.000000] HighMem zone: 23255 pages, LIFO batch:3 > [ 0.000000] Using APIC driver default > [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 24 > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 > [ 0.000000] Allocating PCI resources starting at 40000000 (gap: > 40000000:b8000000) > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s33048 r0 d24296 u2097152 > [ 0.000000] pcpu-alloc: s33048 r0 d24296 u2097152 alloc=1*4194304 > [ 0.000000] pcpu-alloc: [0] 0 1 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 248708 > [ 0.000000] Kernel command line: BOOT_IMAGE=mm ro root=802 > vt.default_utf8=0 resume=/dev/sda8 > [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > [ 0.000000] Enabling fast FPU save and restore... done. > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > [ 0.000000] Initializing CPU#0 > [ 0.000000] Initializing HighMem for node 0 (000377fe:0003d38d) > [ 0.000000] Memory: 980956k/1003060k available (3904k kernel code, > 21272k reserved, 2488k data, 408k init, 93756k highmem) > [ 0.000000] virtual kernel memory layout: > [ 0.000000] fixmap : 0xfff90000 - 0xfffff000 ( 444 kB) > [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) > [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) > [ 0.000000] .init : 0xc163f000 - 0xc16a5000 ( 408 kB) > [ 0.000000] .data : 0xc13d0244 - 0xc163e5a0 (2488 kB) > [ 0.000000] .text : 0xc1000000 - 0xc13d0244 (3904 kB) > [ 0.000000] Checking if this processor honours the WP bit even in > supervisor mode...Ok. > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] NR_IRQS:320 > [ 0.000000] Extended CMOS year: 2000 > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, > Inc., Ingo Molnar > [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 > [ 0.000000] ... MAX_LOCK_DEPTH: 48 > [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 > [ 0.000000] ... CLASSHASH_SIZE: 4096 > [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 > [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 > [ 0.000000] ... CHAINHASH_SIZE: 16384 > [ 0.000000] memory used by lock dependency info: 3567 kB > [ 0.000000] per task-struct memory footprint: 1152 bytes > [ 0.000000] hpet clockevent registered > [ 0.000000] Fast TSC calibration using PIT > [ 0.000000] Detected 1995.100 MHz processor. > [ 0.003349] Calibrating delay loop (skipped), value calculated > using timer frequency.. 3991.45 BogoMIPS (lpj=6650333) > [ 0.003611] Security Framework initialized > [ 0.003717] Mount-cache hash table entries: 512 > [ 0.006964] Initializing cgroup subsys ns > [ 0.006972] Initializing cgroup subsys cpuacct > [ 0.007103] CPU: Physical Processor ID: 0 > [ 0.007108] CPU: Processor Core ID: 0 > [ 0.007114] using mwait in idle threads. > [ 0.007122] Performance Events: Core2 events, Intel PMU driver. > [ 0.007153] ... version: 2 > [ 0.007158] ... bit width: 40 > [ 0.007163] ... generic registers: 2 > [ 0.007168] ... value mask: 000000ffffffffff > [ 0.007173] ... max period: 000000007fffffff > [ 0.007179] ... fixed-purpose events: 3 > [ 0.007184] ... event mask: 0000000700000003 > [ 0.007199] Checking 'hlt' instruction... OK. > [ 0.021587] ACPI: Core revision 20091112 > [ 0.043974] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.079689] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > [ 0.079999] lockdep: fixing up alternatives. > [ 0.079999] Booting processor 1 APIC 0x1 ip 0x6000 > [ 0.079999] Initializing CPU#1 > [ 0.079999] CPU: Physical Processor ID: 0 > [ 0.079999] CPU: Processor Core ID: 1 > [ 0.170015] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > [ 0.173386] Brought up 2 CPUs > [ 0.173393] Total of 2 processors activated (7983.61 BogoMIPS). > [ 0.175046] khelper used greatest stack depth: 6928 bytes left > [ 0.175046] regulator: core version 0.5 > [ 0.176722] Time: 15:30:08 Date: 12/10/09 > [ 0.176823] khelper used greatest stack depth: 6728 bytes left > [ 0.176984] NET: Registered protocol family 16 > [ 0.180083] ACPI: bus type pci registered > [ 0.180201] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem > 0xf8000000-0xfbffffff] (base 0xf8000000) > [ 0.180201] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 > [ 0.180201] PCI: Using MMCONFIG for extended config space > [ 0.180201] PCI: Using configuration type 1 for base access > [ 0.203625] bio: create slab <bio-0> at 0 > [ 0.213198] ACPI: EC: Look up EC in DSDT > [ 0.213825] ACPI: BIOS _OSI(Linux) query ignored > [ 0.276349] ACPI: SSDT 3d3a0c80 00043 (v01 LMPWR DELLLOM 00001001 > INTL 20050624) > [ 0.323792] ACPI: Interpreter enabled > [ 0.323804] ACPI: (supports S0 S3 S4 S5) > [ 0.323895] ACPI: Using IOAPIC for interrupt routing > [ 0.490535] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930 > [ 0.493757] ACPI: No dock devices found. > [ 0.529913] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.530130] pci_root PNP0A03:00: ignoring host bridge windows from > ACPI; boot with "pci=use_crs" to use them > [ 0.600625] pci_root PNP0A03:00: host bridge window [io > 0x0000-0x0cf7] (ignored) > [ 0.600630] pci_root PNP0A03:00: host bridge window [io > 0x0d00-0xffff] (ignored) > [ 0.600634] pci_root PNP0A03:00: host bridge window [mem > 0x000a0000-0x000bffff] (ignored) > [ 0.600637] pci_root PNP0A03:00: host bridge window [mem > 0x000d0000-0x000dffff] (ignored) > [ 0.600641] pci_root PNP0A03:00: host bridge window [mem > 0x40000000-0xf7ffffff] (ignored) > [ 0.600645] pci_root PNP0A03:00: host bridge window [mem > 0xfc000000-0xfebfffff] (ignored) > [ 0.600648] pci_root PNP0A03:00: host bridge window [mem > 0xfec10000-0xfecfffff] (ignored) > [ 0.600652] pci_root PNP0A03:00: host bridge window [mem > 0xfed1c000-0xfed1ffff] (ignored) > [ 0.600656] pci_root PNP0A03:00: host bridge window [mem > 0xfed90000-0xfed9ffff] (ignored) > [ 0.600659] pci_root PNP0A03:00: host bridge window [mem > 0xfed40000-0xfed44fff] (ignored) > [ 0.600663] pci_root PNP0A03:00: host bridge window [mem > 0xfeda7000-0xfedfffff] (ignored) > [ 0.600667] pci_root PNP0A03:00: host bridge window [mem > 0xfee10000-0xff9fffff] (ignored) > [ 0.600670] pci_root PNP0A03:00: host bridge window [mem > 0xffb80000-0xffe7ffff] (ignored) > [ 0.600882] pci 0000:00:02.0: reg 10: [mem 0xf6c00000-0xf6ffffff 64bit] > [ 0.600897] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] > [ 0.600906] pci 0000:00:02.0: reg 20: [io 0xefe8-0xefef] > [ 0.600999] pci 0000:00:02.1: reg 10: [mem 0xf6b00000-0xf6bfffff 64bit] > [ 0.601223] pci 0000:00:1a.0: reg 20: [io 0x6f60-0x6f7f] > [ 0.601374] pci 0000:00:1a.1: reg 20: [io 0x6f80-0x6f9f] > [ 0.601525] pci 0000:00:1a.2: reg 20: [io 0x6fa0-0x6fbf] > [ 0.601673] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] > [ 0.601783] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > [ 0.601791] pci 0000:00:1a.7: PME# disabled > [ 0.601875] pci 0000:00:1b.0: reg 10: [mem 0xf6afc000-0xf6afffff 64bit] > [ 0.601974] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.601981] pci 0000:00:1b.0: PME# disabled > [ 0.602144] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.602151] pci 0000:00:1c.0: PME# disabled > [ 0.602322] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.602329] pci 0000:00:1c.1: PME# disabled > [ 0.602501] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > [ 0.602509] pci 0000:00:1c.4: PME# disabled > [ 0.602629] pci 0000:00:1d.0: reg 20: [io 0x6f00-0x6f1f] > [ 0.602783] pci 0000:00:1d.1: reg 20: [io 0x6f20-0x6f3f] > [ 0.602934] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] > [ 0.603078] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] > [ 0.603187] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.603195] pci 0000:00:1d.7: PME# disabled > [ 0.603580] pci 0000:00:1f.2: reg 10: [io 0x6e70-0x6e77] > [ 0.603592] pci 0000:00:1f.2: reg 14: [io 0x6e78-0x6e7b] > [ 0.603604] pci 0000:00:1f.2: reg 18: [io 0x6e80-0x6e87] > [ 0.603616] pci 0000:00:1f.2: reg 1c: [io 0x6e88-0x6e8b] > [ 0.603628] pci 0000:00:1f.2: reg 20: [io 0x6ea0-0x6eaf] > [ 0.603640] pci 0000:00:1f.2: reg 24: [io 0x6e90-0x6e9f] > [ 0.603762] pci 0000:00:1f.3: reg 10: [mem 0xf6afbf00-0xf6afbfff 64bit] > [ 0.603793] pci 0000:00:1f.3: reg 20: [io 0x1100-0x111f] > [ 0.603905] pci 0000:00:1f.5: reg 10: [io 0x6eb0-0x6eb7] > [ 0.603917] pci 0000:00:1f.5: reg 14: [io 0x6eb8-0x6ebb] > [ 0.603929] pci 0000:00:1f.5: reg 18: [io 0x6ec0-0x6ec7] > [ 0.603941] pci 0000:00:1f.5: reg 1c: [io 0x6ec8-0x6ecb] > [ 0.603953] pci 0000:00:1f.5: reg 20: [io 0x6ee0-0x6eef] > [ 0.603965] pci 0000:00:1f.5: reg 24: [io 0xeff0-0xefff] > [ 0.604140] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] > [ 0.604519] pci 0000:0c:00.0: reg 10: [mem 0xf69fc000-0xf69fffff 64bit] > [ 0.604778] pci 0000:0c:00.0: supports D1 D2 > [ 0.604781] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold > [ 0.604796] pci 0000:0c:00.0: PME# disabled > [ 0.604958] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] > [ 0.604974] pci 0000:00:1c.1: bridge window [mem 0xf6900000-0xf69fffff] > [ 0.605134] pci 0000:09:00.0: reg 10: [mem 0xf68f0000-0xf68fffff 64bit] > [ 0.605282] pci 0000:09:00.0: PME# supported from D3hot D3cold > [ 0.605291] pci 0000:09:00.0: PME# disabled > [ 0.605402] pci 0000:00:1c.4: PCI bridge to [bus 09-09] > [ 0.605418] pci 0000:00:1c.4: bridge window [mem 0xf6800000-0xf68fffff] > [ 0.605503] pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff] > [ 0.605541] pci 0000:02:01.0: supports D1 D2 > [ 0.605544] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.605552] pci 0000:02:01.0: PME# disabled > [ 0.605617] pci 0000:02:01.1: reg 10: [mem 0xf67ff800-0xf67fffff] > [ 0.605711] pci 0000:02:01.1: supports D1 D2 > [ 0.605714] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.605721] pci 0000:02:01.1: PME# disabled > [ 0.605790] pci 0000:02:01.2: reg 10: [mem 0xf67ff700-0xf67ff7ff] > [ 0.605884] pci 0000:02:01.2: supports D1 D2 > [ 0.605887] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.605895] pci 0000:02:01.2: PME# disabled > [ 0.606011] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode) > [ 0.606028] pci 0000:00:1e.0: bridge window [mem 0xf6700000-0xf67fffff] > [ 0.606075] pci_bus 0000:03: [bus 03-06] partially hidden behind > transparent bridge 0000:02 [bus 02-03] > [ 0.606125] pci_bus 0000:00: on NUMA node 0 > [ 0.606134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.607778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] > [ 0.608386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > [ 0.608653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > [ 0.608946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] > [ 0.667029] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) > [ 0.667370] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4 > [ 0.667708] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *3 > [ 0.668044] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) > [ 0.668382] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) > [ 0.670294] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) > [ 0.670639] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) > [ 0.670927] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 > 12 14 15) *0, disabled. > [ 0.671151] vgaarb: device added: > PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.671151] vgaarb: loaded > [ 0.673347] SCSI subsystem initialized > [ 0.673534] libata version 3.00 loaded. > [ 0.673633] usbcore: registered new interface driver usbfs > [ 0.673633] usbcore: registered new interface driver hub > [ 0.673633] usbcore: registered new device driver usb > [ 0.673697] PCI: Using ACPI for IRQ routing > [ 0.673697] PCI: pci_cache_line_size set to 64 bytes > [ 0.677479] HPET: 4 timers in total, 0 timers will be used for per-cpu timer > [ 0.677479] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 > [ 0.677479] hpet0: 4 comparators, 64-bit 14.318180 MHz counter > [ 0.686678] Switching to clocksource tsc > [ 0.698122] pnp: PnP ACPI init > [ 0.698167] ACPI: bus type pnp registered > [ 0.810987] pnp: PnP ACPI: found 13 devices > [ 0.810996] ACPI: ACPI bus type pnp unregistered > [ 0.811028] system 00:05: [io 0x0c80-0x0caf] has been reserved > [ 0.811038] system 00:05: [io 0x0cc0-0x0cff] could not be reserved > [ 0.811062] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved > [ 0.811085] system 00:09: [io 0x0cb0-0x0cbb] has been reserved > [ 0.811104] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved > [ 0.811126] system 00:0a: [io 0x0900-0x092f] has been reserved > [ 0.811135] system 00:0a: [io 0x0931-0x0933] has been reserved > [ 0.811144] system 00:0a: [io 0x0935-0x097f] has been reserved > [ 0.811152] system 00:0a: [io 0x04d0-0x04d1] has been reserved > [ 0.811161] system 00:0a: [io 0x1000-0x1005] has been reserved > [ 0.811170] system 00:0a: [io 0x1008-0x100f] has been reserved > [ 0.811192] system 00:0b: [io 0xf400-0xf4fe] has been reserved > [ 0.811201] system 00:0b: [io 0x1006-0x1007] has been reserved > [ 0.811211] system 00:0b: [io 0x100a-0x1059] could not be reserved > [ 0.811219] system 00:0b: [io 0x1060-0x107f] has been reserved > [ 0.811228] system 00:0b: [io 0x1080-0x10bf] has been reserved > [ 0.811236] system 00:0b: [io 0x1100-0x111f] has been reserved > [ 0.811245] system 00:0b: [io 0x1010-0x102f] has been reserved > [ 0.811253] system 00:0b: [io 0x0809] has been reserved > [ 0.811276] system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved > [ 0.811287] system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved > [ 0.811297] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved > [ 0.811307] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved > [ 0.811318] system 00:0c: [mem 0x00100000-0x3d38d3ff] could not be reserved > [ 0.811328] system 00:0c: [mem 0x3d38d400-0x3dafffff] could not be reserved > [ 0.811338] system 00:0c: [mem 0x3db00000-0x3dbfffff] has been reserved > [ 0.811347] system 00:0c: [mem 0xffe80000-0xffffffff] has been reserved > [ 0.811356] system 00:0c: [mem 0xffa00000-0xffb7ffff] has been reserved > [ 0.811366] system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved > [ 0.811376] system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved > [ 0.811385] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved > [ 0.811394] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved > [ 0.811403] system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved > [ 0.811413] system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved > [ 0.811423] system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved > [ 0.811432] system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved > [ 0.811441] system 00:0c: [mem 0xfed1c800-0xfed1cfff] has been reserved > [ 0.811451] system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved > [ 0.811460] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved > [ 0.848952] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 > (level, low) -> IRQ 17 > [ 0.848977] b43-pci-bridge 0000:0c:00.0: setting latency timer to 64 > [ 0.863385] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243) > [ 0.863405] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, > vendor 0x4243) > [ 0.863425] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243) > [ 0.863445] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243) > [ 0.879792] ssb: Found rev 1 PMU (capabilities 0x02A62F01) > [ 0.889038] ssb: SPROM revision 8 detected. > [ 0.903507] ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0 > [ 0.903853] pci 0000:00:1e.0: BAR 9: assigned [mem > 0x40000000-0x43ffffff pref] > [ 0.903864] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff] > [ 0.903873] pci 0000:00:1c.0: BAR 9: assigned [mem > 0x44200000-0x443fffff 64bit pref] > [ 0.903883] pci 0000:00:1c.1: BAR 9: assigned [mem > 0x44400000-0x445fffff 64bit pref] > [ 0.903893] pci 0000:00:1c.4: BAR 9: assigned [mem > 0x44600000-0x447fffff 64bit pref] > [ 0.903903] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] > [ 0.903911] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] > [ 0.903919] pci 0000:00:1c.4: BAR 7: assigned [io 0x4000-0x4fff] > [ 0.903927] pci 0000:00:1e.0: BAR 7: assigned [io 0x5000-0x5fff] > [ 0.903935] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] > [ 0.903944] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] > [ 0.903958] pci 0000:00:1c.0: bridge window [mem 0x44000000-0x441fffff] > [ 0.903970] pci 0000:00:1c.0: bridge window [mem > 0x44200000-0x443fffff 64bit pref] > [ 0.903987] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] > [ 0.903996] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] > [ 0.904009] pci 0000:00:1c.1: bridge window [mem 0xf6900000-0xf69fffff] > [ 0.904021] pci 0000:00:1c.1: bridge window [mem > 0x44400000-0x445fffff 64bit pref] > [ 0.904038] pci 0000:00:1c.4: PCI bridge to [bus 09-09] > [ 0.904047] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] > [ 0.904061] pci 0000:00:1c.4: bridge window [mem 0xf6800000-0xf68fffff] > [ 0.904073] pci 0000:00:1c.4: bridge window [mem > 0x44600000-0x447fffff 64bit pref] > [ 0.904094] pci 0000:02:01.0: BAR 9: assigned [mem > 0x40000000-0x43ffffff pref] > [ 0.904105] pci 0000:02:01.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] > [ 0.904113] pci 0000:02:01.0: BAR 0: assigned [mem 0xf6700000-0xf6700fff] > [ 0.904126] pci 0000:02:01.0: BAR 0: set to [mem > 0xf6700000-0xf6700fff] (PCI address [0xf6700000-0xf6700fff] > [ 0.904137] pci 0000:02:01.0: BAR 7: assigned [io 0x5000-0x50ff] > [ 0.904145] pci 0000:02:01.0: BAR 8: assigned [io 0x5100-0x51ff] > [ 0.904152] pci 0000:02:01.0: CardBus bridge to [bus 03-06] > [ 0.904159] pci 0000:02:01.0: bridge window [io 0x5000-0x50ff] > [ 0.904170] pci 0000:02:01.0: bridge window [io 0x5100-0x51ff] > [ 0.904182] pci 0000:02:01.0: bridge window [mem > 0x40000000-0x43ffffff pref] > [ 0.904194] pci 0000:02:01.0: bridge window [mem 0x48000000-0x4bffffff] > [ 0.904206] pci 0000:00:1e.0: PCI bridge to [bus 02-03] > [ 0.904214] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff] > [ 0.904228] pci 0000:00:1e.0: bridge window [mem 0xf6700000-0xf67fffff] > [ 0.904240] pci 0000:00:1e.0: bridge window [mem > 0x40000000-0x43ffffff pref] > [ 0.904273] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.904285] pci 0000:00:1c.0: setting latency timer to 64 > [ 0.904302] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 0.904314] pci 0000:00:1c.1: setting latency timer to 64 > [ 0.904330] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.904342] pci 0000:00:1c.4: setting latency timer to 64 > [ 0.904355] pci 0000:00:1e.0: setting latency timer to 64 > [ 0.904375] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > [ 0.904388] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] > [ 0.904392] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] > [ 0.904395] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff] > [ 0.904398] pci_bus 0000:0b: resource 1 [mem 0x44000000-0x441fffff] > [ 0.904402] pci_bus 0000:0b: resource 2 [mem 0x44200000-0x443fffff > 64bit pref] > [ 0.904405] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff] > [ 0.904408] pci_bus 0000:0c: resource 1 [mem 0xf6900000-0xf69fffff] > [ 0.904412] pci_bus 0000:0c: resource 2 [mem 0x44400000-0x445fffff > 64bit pref] > [ 0.904415] pci_bus 0000:09: resource 0 [io 0x4000-0x4fff] > [ 0.904418] pci_bus 0000:09: resource 1 [mem 0xf6800000-0xf68fffff] > [ 0.904422] pci_bus 0000:09: resource 2 [mem 0x44600000-0x447fffff > 64bit pref] > [ 0.904425] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] > [ 0.904428] pci_bus 0000:02: resource 1 [mem 0xf6700000-0xf67fffff] > [ 0.904432] pci_bus 0000:02: resource 2 [mem 0x40000000-0x43ffffff pref] > [ 0.904435] pci_bus 0000:02: resource 3 [io 0x0000-0xffff] > [ 0.904438] pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffff] > [ 0.904441] pci_bus 0000:03: resource 0 [io 0x5000-0x50ff] > [ 0.904444] pci_bus 0000:03: resource 1 [io 0x5100-0x51ff] > [ 0.904447] pci_bus 0000:03: resource 2 [mem 0x40000000-0x43ffffff pref] > [ 0.904451] pci_bus 0000:03: resource 3 [mem 0x48000000-0x4bffffff] > [ 0.904632] NET: Registered protocol family 2 > [ 0.904933] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > [ 0.905890] TCP established hash table entries: 131072 (order: 8, > 1048576 bytes) > [ 0.906395] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) > [ 0.914821] TCP: Hash tables configured (established 131072 bind 65536) > [ 0.914889] TCP reno registered > [ 0.914906] UDP hash table entries: 512 (order: 3, 40960 bytes) > [ 0.915056] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) > [ 0.915548] NET: Registered protocol family 1 > [ 0.915594] pci 0000:00:02.0: Boot video device > [ 0.916138] PCI: CLS 64 bytes, default 64 > [ 0.920703] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3 > [ 0.920737] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 > [ 0.920934] Microcode Update Driver: v2.00 > <tigran@aivazian.fsnet.co.uk>, Peter Oruba > [ 0.921968] audit: initializing netlink socket (disabled) > [ 0.922049] type=2000 audit(1260459007.916:1): initialized > [ 0.930909] highmem bounce pool size: 64 pages > [ 0.930924] HugeTLB registered 4 MB page size, pre-allocated 0 pages > [ 0.931615] VFS: Disk quotas dquot_6.5.2 > [ 0.931702] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 0.933146] Btrfs loaded > [ 0.933162] msgmni has been set to 1733 > [ 0.934396] alg: No test for stdrng (krng) > [ 0.934614] Block layer SCSI generic (bsg) driver version 0.4 > loaded (major 253) > [ 0.934641] io scheduler noop registered > [ 0.934647] io scheduler deadline registered > [ 0.934697] io scheduler cfq registered (default) > [ 0.935545] pcieport 0000:00:1c.0: setting latency timer to 64 > [ 0.935634] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X > [ 0.936286] pcieport 0000:00:1c.1: setting latency timer to 64 > [ 0.936377] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X > [ 0.937034] pcieport 0000:00:1c.4: setting latency timer to 64 > [ 0.937118] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X > [ 0.938238] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.939692] ALI M7101 PMU not found. > [ 0.940148] vesafb: framebuffer at 0xe0000000, mapped to > 0xf8080000, using 3072k, total 32704k > [ 0.940158] vesafb: mode is 1024x768x16, linelength=2048, pages=20 > [ 0.940165] vesafb: scrolling: redraw > [ 0.940171] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > [ 0.953782] Console: switching to colour frame buffer device 128x48 > [ 0.966131] fb0: VESA VGA frame buffer device > [ 0.967114] ACPI: AC Adapter [AC] (on-line) > [ 0.968048] input: Lid Switch as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 > [ 0.970682] ACPI: Lid Switch [LID] > [ 0.971064] input: Power Button as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 > [ 0.971270] ACPI: Power Button [PBTN] > [ 0.971668] input: Sleep Button as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 > [ 0.971869] ACPI: Sleep Button [SBTN] > [ 0.973787] ACPI: SSDT 3d390953 002C3 (v01 PmRef BspIst 00003000 > INTL 20050624) > [ 0.976373] ACPI: SSDT 3d390ded 005C6 (v01 PmRef BspCst 00003001 > INTL 20050624) > [ 0.978792] Monitor-Mwait will be used to enter C-1 state > [ 0.978888] Monitor-Mwait will be used to enter C-2 state > [ 0.978969] Monitor-Mwait will be used to enter C-3 state > [ 0.978985] Marking TSC unstable due to TSC halts in idle > [ 0.979117] Switching to clocksource hpet > [ 0.980233] processor LNXCPU:00: registered as cooling_device0 > [ 0.981727] ACPI: SSDT 3d390c16 001D7 (v01 PmRef ApIst 00003000 > INTL 20050624) > [ 0.984297] ACPI: SSDT 3d3913b3 0008D (v01 PmRef ApCst 00003000 > INTL 20050624) > [ 0.987470] processor LNXCPU:01: registered as cooling_device1 > [ 1.036564] thermal LNXTHERM:01: registered as thermal_zone0 > [ 1.036744] ACPI: Thermal Zone [THM] (50 C) > [ 1.057169] Non-volatile memory driver v1.3 > [ 1.058010] i8k: unable to get SMM BIOS version > [ 1.058127] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal > Zotto (dz@debian.org) > [ 1.058728] Linux agpgart interface v0.103 > [ 1.059781] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 > Express Chipset > [ 1.066202] agpgart-intel 0000:00:00.0: detected 32764K stolen memory > [ 1.075474] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 > [ 1.081183] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 > seconds, margin is 60 seconds). > [ 1.086768] Hangcheck: Using get_cycles(). > [ 1.092487] [drm] Initialized drm 1.1.0 20060810 > [ 1.098041] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 1.103610] i915 0000:00:02.0: setting latency timer to 64 > [ 1.109032] mtrr: type mismatch for e0000000,10000000 old: > write-back new: write-combining > [ 1.114711] [drm] MTRR allocation failed. Graphics performance may suffer. > [ 1.120525] i915 0000:00:02.0: irq 27 for MSI/MSI-X > [ 1.120541] [drm] set up 31M of stolen space > [ 1.173585] ACPI: Battery Slot [BAT0] (battery present) > [ 1.743361] [drm] TV-21: set mode NTSC 480i 0 > [ 1.917419] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - > removing generic driver > [ 1.923290] Console: switching to colour dummy device 80x25 > [ 1.993413] [drm] LVDS-8: set mode 1280x800 c > [ 2.180028] async/0 used greatest stack depth: 6240 bytes left > [ 2.311701] Console: switching to colour frame buffer device 160x50 > [ 2.344161] fb0: inteldrmfb frame buffer device > [ 2.344163] registered panic notifier > [ 2.381263] acpi device:3b: registered as cooling_device2 > [ 2.383064] input: Video Bus as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input3 > [ 2.383507] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) > [ 2.383961] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package > has no elements (empty) (20091112/nspredef-439) > [ 2.384794] input: Video Bus as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input4 > [ 2.385220] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) > [ 2.385736] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 > [ 2.386291] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 2.397666] brd: module loaded > [ 2.402531] loop: module loaded > [ 2.403545] Loading iSCSI transport class v2.0-870. > [ 2.405776] ata_piix 0000:00:1f.2: version 2.13 > [ 2.405803] ata_piix 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > [ 2.406147] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] > [ 2.406810] ata_piix 0000:00:1f.2: setting latency timer to 64 > [ 2.406998] scsi0 : ata_piix > [ 2.407806] scsi1 : ata_piix > [ 2.410373] ata1: SATA max UDMA/133 cmd 0x6e70 ctl 0x6e78 bmdma 0x6ea0 irq 19 > [ 2.410705] ata2: SATA max UDMA/133 cmd 0x6e80 ctl 0x6e88 bmdma 0x6ea8 irq 19 > [ 2.411165] ata_piix 0000:00:1f.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > [ 2.411501] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] > [ 2.563394] ata_piix 0000:00:1f.5: setting latency timer to 64 > [ 2.563493] scsi2 : ata_piix > [ 2.564121] scsi3 : ata_piix > [ 2.575834] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 19 > [ 2.586887] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 19 > [ 2.600548] tg3.c:v3.105 (December 2, 2009) > [ 2.611593] tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 2.622751] tg3 0000:09:00.0: setting latency timer to 64 > [ 2.638698] eth0: Tigon3 [partno(BCM95756m) rev a200] (PCI Express) > MAC address 00:21:9b:f5:60:0f > [ 2.650064] eth0: attached PHY is 5722/5756 (10/100/1000Base-T > Ethernet) (WireSpeed[1]) > [ 2.661533] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] > [ 2.673063] eth0: dma_rwctrl[76180000] dma_mask[64-bit] > [ 2.684889] sky2 driver version 1.26 > [ 2.696408] PPP generic driver version 2.4.2 > [ 2.708158] PPP Deflate Compression module registered > [ 2.719445] PPP BSD Compression module registered > [ 2.731444] PPP MPPE Compression module registered > [ 2.742638] NET: Registered protocol family 24 > [ 2.753770] PPPoL2TP kernel driver, V1.0 > [ 2.764836] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, > max=256) (6 bit encapsulation enabled). > [ 2.776283] CSLIP: code copyright 1989 Regents of the University of > California. > [ 2.787734] SLIP linefill/keepalive option. > [ 2.799316] console [netcon0] enabled > [ 2.810537] netconsole: network logging started > [ 2.822002] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 2.833433] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > [ 2.844842] ehci_hcd 0000:00:1a.7: setting latency timer to 64 > [ 2.844848] ehci_hcd 0000:00:1a.7: EHCI Host Controller > [ 2.856214] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned > bus number 1 > [ 2.867638] ehci_hcd 0000:00:1a.7: debug port 1 > [ 2.882679] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported > [ 2.882717] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 > [ 2.894255] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 2.905663] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 2.906708] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > [ 2.906949] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 2.906952] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.906955] usb usb1: Product: EHCI Host Controller > [ 2.906958] usb usb1: Manufacturer: Linux 2.6.32-mm1 ehci_hcd > [ 2.906960] usb usb1: SerialNumber: 0000:00:1a.7 > [ 2.908100] hub 1-0:1.0: USB hub found > [ 2.908116] hub 1-0:1.0: 6 ports detected > [ 2.908556] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ 2.908581] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 2.908585] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 2.908603] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned > bus number 2 > [ 2.908679] ehci_hcd 0000:00:1d.7: debug port 1 > [ 2.912557] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported > [ 2.912592] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 > [ 2.934701] ata3: SATA link down (SStatus 0 SControl 300) > [ 2.946085] ata4: SATA link down (SStatus 4 SControl 300) > [ 2.946126] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 2.946207] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > [ 2.946210] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.946212] usb usb2: Product: EHCI Host Controller > [ 2.946215] usb usb2: Manufacturer: Linux 2.6.32-mm1 ehci_hcd > [ 2.946217] usb usb2: SerialNumber: 0000:00:1d.7 > [ 2.946808] hub 2-0:1.0: USB hub found > [ 2.946831] hub 2-0:1.0: 6 ports detected > [ 2.947216] uhci_hcd: USB Universal Host Controller Interface driver > [ 3.159489] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ 3.160208] ata1.00: ATA-8: ST9160310AS, DE04, max UDMA/133 > [ 3.160212] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32) > [ 3.189480] uhci_hcd 0000:00:1a.0: setting latency timer to 64 > [ 3.189485] uhci_hcd 0000:00:1a.0: UHCI Host Controller > [ 3.191391] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633A, D500, max UDMA/100 > [ 3.191405] ata2.00: applying bridge limits > [ 3.219002] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned > bus number 3 > [ 3.229172] ata1.00: configured for UDMA/133 > [ 3.229191] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60 > [ 3.229343] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > [ 3.229347] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 3.229349] usb usb3: Product: UHCI Host Controller > [ 3.229351] usb usb3: Manufacturer: Linux 2.6.32-mm1 uhci_hcd > [ 3.229354] usb usb3: SerialNumber: 0000:00:1a.0 > [ 3.229946] hub 3-0:1.0: USB hub found > [ 3.230036] hub 3-0:1.0: 2 ports detected > [ 3.230281] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > [ 3.230296] uhci_hcd 0000:00:1a.1: setting latency timer to 64 > [ 3.230301] uhci_hcd 0000:00:1a.1: UHCI Host Controller > [ 3.230323] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned > bus number 4 > [ 3.230400] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80 > [ 3.230538] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 3.230541] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 3.230544] usb usb4: Product: UHCI Host Controller > [ 3.230546] usb usb4: Manufacturer: Linux 2.6.32-mm1 uhci_hcd > [ 3.230549] usb usb4: SerialNumber: 0000:00:1a.1 > [ 3.231135] hub 4-0:1.0: USB hub found > [ 3.231150] hub 4-0:1.0: 2 ports detected > [ 3.231310] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > [ 3.231324] uhci_hcd 0000:00:1a.2: setting latency timer to 64 > [ 3.231329] uhci_hcd 0000:00:1a.2: UHCI Host Controller > [ 3.231346] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned > bus number 5 > [ 3.231393] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0 > [ 3.231521] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > [ 3.231524] usb usb5: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 3.231526] usb usb5: Product: UHCI Host Controller > [ 3.231529] usb usb5: Manufacturer: Linux 2.6.32-mm1 uhci_hcd > [ 3.231531] usb usb5: SerialNumber: 0000:00:1a.2 > [ 3.232101] hub 5-0:1.0: USB hub found > [ 3.232121] hub 5-0:1.0: 2 ports detected > [ 3.232287] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ 3.232302] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 3.232306] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 3.232323] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned > bus number 6 > [ 3.232370] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00 > [ 3.232504] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > [ 3.232507] usb usb6: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 3.232510] usb usb6: Product: UHCI Host Controller > [ 3.232512] usb usb6: Manufacturer: Linux 2.6.32-mm1 uhci_hcd > [ 3.232514] usb usb6: SerialNumber: 0000:00:1d.0 > [ 3.233084] hub 6-0:1.0: USB hub found > [ 3.233100] hub 6-0:1.0: 2 ports detected > [ 3.233273] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > [ 3.233287] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 3.233292] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 3.233310] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned > bus number 7 > [ 3.233380] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20 > [ 3.233513] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > [ 3.233516] usb usb7: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 3.233518] usb usb7: Product: UHCI Host Controller > [ 3.233521] usb usb7: Manufacturer: Linux 2.6.32-mm1 uhci_hcd > [ 3.233523] usb usb7: SerialNumber: 0000:00:1d.1 > [ 3.234086] hub 7-0:1.0: USB hub found > [ 3.234101] hub 7-0:1.0: 2 ports detected > [ 3.234263] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > [ 3.234277] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 3.234282] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 3.234299] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned > bus number 8 > [ 3.234347] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 > [ 3.234480] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 > [ 3.234483] usb usb8: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 3.234486] usb usb8: Product: UHCI Host Controller > [ 3.234488] usb usb8: Manufacturer: Linux 2.6.32-mm1 uhci_hcd > [ 3.234490] usb usb8: SerialNumber: 0000:00:1d.2 > [ 3.235059] hub 8-0:1.0: USB hub found > [ 3.235082] hub 8-0:1.0: 2 ports detected > [ 3.235437] Initializing USB Mass Storage driver... > [ 3.235668] usbcore: registered new interface driver usb-storage > [ 3.235673] USB Mass Storage support registered. > [ 3.236109] usbcore: registered new interface driver libusual > [ 3.236534] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at > 0x60,0x64 irq 1,12 > [ 3.237387] i8042.c: Warning: Keylock active. > [ 3.240564] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 3.240605] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 3.241694] mice: PS/2 mouse device common for all mice > [ 3.243828] Driver 'rtc_cmos' needs updating - please use bus_type methods > [ 3.243873] rtc_cmos 00:03: RTC can wake from S4 > [ 3.244268] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 > [ 3.244314] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs > [ 3.244498] i2c /dev entries driver > [ 3.246702] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, > low) -> IRQ 19 > [ 3.982537] ata2.00: configured for UDMA/100 > [ 3.983129] scsi 0:0:0:0: Direct-Access ATA ST9160310AS > DE04 PQ: 0 ANSI: 5 > [ 3.984407] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04 > [ 3.985019] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: > (160 GB/149 GiB) > [ 3.985213] sd 0:0:0:0: [sda] Write Protect is off > [ 3.985217] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 3.985296] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 3.986007] sda: > [ 3.987294] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 > [ 3.987559] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 3.988645] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060) > [ 3.988921] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 3.988927] iTCO_vendor_support: vendor-support=0 > [ 4.103269] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) > initialised: dm-devel@redhat.com > [ 4.114089] device-mapper: dm-log-userspace: version 1.0.0 loaded > [ 4.115717] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW > TS-L633A D500 PQ: 0 ANSI: 5 > [ 4.136170] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input5 > [ 4.137513] cpuidle: using governor ladder > [ 4.160918] cpuidle: using governor menu > [ 4.172702] sdhci: Secure Digital Host Controller Interface driver > [ 4.183721] sdhci: Copyright(c) Pierre Ossman > [ 4.187247] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw > xa/form2 cdda tray > [ 4.187251] Uniform CD-ROM driver Revision: 3.20 > [ 4.188050] sr 1:0:0:0: Attached scsi CD-ROM sr0 > [ 4.188595] sr 1:0:0:0: Attached scsi generic sg1 type 5 > [ 4.228490] dcdbas dcdbas: Dell Systems Management Base Driver > (version 5.6.0-3.2) > [ 4.244671] sda1 sda2 sda3 sda4 < > [ 4.246859] usbcore: registered new interface driver hiddev > [ 4.269823] usbcore: registered new interface driver usbhid > [ 4.281086] usbhid: USB HID core driver > [ 4.292291] sda5 > [ 4.292837] Advanced Linux Sound Architecture Driver Version 1.0.21. > [ 4.314873] ALSA device list: > [ 4.325942] No soundcards found. > [ 4.336996] Netfilter messages via NETLINK v0.30. > [ 4.348290] sda6nf_conntrack version 0.5.0 (15334 buckets, 61336 max) > [ 4.360287] ctnetlink v0.93: registering with nfnetlink. > [ 4.374177] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 4.385662] TCP cubic registered > [ 4.396917] NET: Registered protocol family 17 > [ 4.408204] lib80211: common routines for IEEE802.11 drivers > [ 4.419455] lib80211_crypt: registered algorithm 'NULL' > [ 4.421640] sda7 > [ 4.422604] Using IPI No-Shortcut mode > [ 4.444566] sda8 > > [ 4.457176] PM: Checking image partition /dev/sda8 > [ 4.457222] PM: Resume from partition 8:8 > [ 4.457225] PM: Checking hibernation image. > [ 4.457992] PM: Error -22 checking image file > [ 4.457994] PM: Resume from disk failed. > [ 4.458061] registered taskstats version 1 > [ 4.460011] sd 0:0:0:0: [sda] Attached SCSI disk > [ 4.481540] Magic number: 5:855:537 > [ 4.492483] bdi 1:15: hash matches > [ 4.503405] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found > [ 4.650495] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 > [ 4.692892] input: AlpsPS/2 ALPS GlidePoint as > /devices/platform/i8042/serio1/input/input7 > [ 4.720082] md: Waiting for all devices to be available before autodetect > [ 4.742549] md: If you don't use raid, use raid=noautodetect > [ 4.767844] md: Autodetecting RAID arrays. > [ 4.778687] md: Scanned 0 and added 0 devices. > [ 4.789416] md: autorun ... > [ 4.800012] md: ... autorun DONE. > [ 5.003501] Clocksource tsc unstable (delta = -321604132 ns) > [ 5.079096] kjournald starting. Commit interval 5 seconds > [ 5.079824] EXT3-fs (sda2): mounted filesystem with writeback data mode > [ 5.080120] VFS: Mounted root (ext3 filesystem) readonly on device 8:2. > [ 5.142808] Freeing unused kernel memory: 408k freed > [ 5.165214] Write protecting the kernel text: 3908k > [ 5.186530] async/1 used greatest stack depth: 6064 bytes left > [ 5.196969] Write protecting the kernel read-only data: 2088k > [ 6.333570] mount used greatest stack depth: 6040 bytes left > [ 6.951249] udevd used greatest stack depth: 5952 bytes left > [ 7.234948] modprobe used greatest stack depth: 5828 bytes left > [ 7.651236] cfg80211: Using static regulatory domain info > [ 7.661764] cfg80211: Regulatory domain: US > [ 7.671985] (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp) > [ 7.682267] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) > [ 7.692698] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > [ 7.703043] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > [ 7.713325] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > [ 7.723694] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > [ 7.733671] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) > [ 7.771924] sdhci-pci 0000:02:01.2: SDHCI controller found > [1180:0822] (rev 21) > [ 7.781951] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, > low) -> IRQ 18 > [ 7.794964] ACPI: WMI: Mapper loaded > [ 7.879419] Registered led device: mmc0:: > [ 7.944622] mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA > [ 7.966785] mmc0: Minimum clock frequency too high for identification mode > [ 7.997256] ohci1394 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 8.016459] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, > low) -> IRQ 21 > [ 8.036194] cfg80211: Calling CRDA for country: US > [ 8.069726] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] > MMIO=[f67ff800-f67fffff] Max Packet=[2048] IR/IT contexts=[4/4] > [ 8.080275] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X > [ 8.080357] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 8.512355] input: Dell WMI hotkeys as /devices/virtual/input/input8 > [ 9.389757] ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc0001679c05c] > [ 9.532991] b43-phy0: Broadcom 4312 WLAN found (core revision 15) > [ 9.580380] b43-phy0 debug: Found PHY: Analog 6, Type 5, Revision 1 > [ 9.580405] b43-phy0 debug: Found Radio: Manuf 0x17F, Version > 0x2062, Revision 2 > [ 9.604678] phy0: Selected rate control algorithm 'minstrel' > [ 9.608519] Registered led device: b43-phy0::tx > [ 9.630314] Registered led device: b43-phy0::rx > [ 9.651887] Registered led device: b43-phy0::radio > [ 9.662725] Broadcom 43xx driver loaded [ Features: PLS, Firmware-ID: FW13 ] > [ 10.307938] Adding 2008084k swap on /dev/sda8. Priority:-1 > extents:1 across:2008084k > [ 12.595365] EXT3-fs (sda2): using internal journal > [ 17.969618] kjournald starting. Commit interval 5 seconds > [ 17.991570] EXT3-fs (sda3): using internal journal > [ 18.013380] EXT3-fs (sda3): mounted filesystem with writeback data mode > [ 18.237351] modprobe used greatest stack depth: 5816 bytes left > [ 18.299750] REISERFS (device sda5): found reiserfs format "3.6" > with standard journal > [ 18.322229] REISERFS warning (device sda5): reiserfs_fill_super: > CONFIG_REISERFS_CHECK is set ON > [ 18.344705] REISERFS warning (device sda5): reiserfs_fill_super: - > it is slow mode for debugging. > [ 18.366916] REISERFS (device sda5): using ordered data mode > [ 18.402628] REISERFS (device sda5): journal params: device sda5, > size 8192, journal first block 18, max trans len 1024, max batch 900, > max commit age 30, max trans age 30 > [ 18.425822] REISERFS (device sda5): checking transaction log (sda5) > [ 18.437324] REISERFS debug (device sda5): journal-1153: found in > header: first_unflushed_offset 1203, last_flushed_trans_id 124057 > [ 18.441500] REISERFS debug (device sda5): journal-1006: found valid > transaction start offset 4294968499, len 121333 id 4096 > [ 18.441510] REISERFS debug (device sda5): journal-1206: Starting > replay from offset 532825052808371, trans_id 2823643143 > [ 18.441519] REISERFS debug (device sda5): journal-1037: > journal_read_transaction, offset 4294968499, len 359 mount_id > -1471324153 > [ 18.441527] REISERFS debug (device sda5): journal-1039: > journal_read_trans skipping because 1203 is too old > [ 18.441534] REISERFS debug (device sda5): journal-1299: Setting > newest_mount_id to 457 > [ 18.465006] REISERFS (device sda5): Using r5 hash to sort names > [ 18.517772] mount used greatest stack depth: 5740 bytes left > [ 19.151072] rc.S used greatest stack depth: 5424 bytes left > [ 27.284345] smbd used greatest stack depth: 5296 bytes left > [ 224.256014] PM: Syncing filesystems ... done. > [ 224.295550] PM: Preparing system for mem sleep > [ 224.295734] Freezing user space processes ... (elapsed 0.01 seconds) done. > [ 224.306948] Freezing remaining freezable tasks ... (elapsed 0.01 > seconds) done. > [ 224.320225] PM: Entering mem sleep > [ 224.320350] Suspending console(s) (use no_console_suspend to debug) > [ 224.335095] sd 0:0:0:0: [sda] Synchronizing SCSI cache > [ 224.538141] sd 0:0:0:0: [sda] Stopping disk > [ 225.379324] ACPI handle has no context! > [ 225.379364] sdhci-pci 0000:02:01.2: PCI INT C disabled > [ 225.379374] ACPI handle has no context! > [ 225.395501] ACPI handle has no context! > [ 225.407487] b43-pci-bridge 0000:0c:00.0: PCI INT A disabled > [ 225.420718] ata_piix 0000:00:1f.5: PCI INT D disabled > [ 225.433838] ata_piix 0000:00:1f.2: PCI INT D disabled > [ 225.446992] ehci_hcd 0000:00:1d.7: PCI INT A disabled > [ 225.447061] uhci_hcd 0000:00:1d.2: PCI INT C disabled > [ 225.447076] uhci_hcd 0000:00:1d.1: PCI INT B disabled > [ 225.447090] uhci_hcd 0000:00:1d.0: PCI INT A disabled > [ 225.653729] HDA Intel 0000:00:1b.0: PCI INT A disabled > [ 225.666930] ehci_hcd 0000:00:1a.7: PCI INT C disabled > [ 225.666952] uhci_hcd 0000:00:1a.2: PCI INT C disabled > [ 225.666974] uhci_hcd 0000:00:1a.1: PCI INT B disabled > [ 225.667001] uhci_hcd 0000:00:1a.0: PCI INT A disabled > [ 225.680708] render error detected, EIR: 0x00000010 > [ 225.680711] IPEIR: 0x00000000 > [ 225.680714] IPEHR: 0x01000000 > [ 225.680716] INSTDONE: 0xfffffffe > [ 225.680718] INSTPS: 0x0001e000 > [ 225.680720] INSTDONE1: 0xffffffff > [ 225.680722] ACTHD: 0x02000018 > [ 225.680725] page table error > [ 225.680727] PGTBL_ER: 0x00100000 > [ 225.680731] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking > [ 225.731462] ACPI: Preparing to enter system sleep state S3 > [ 225.754167] Disabling non-boot CPUs ... > [ 225.809478] CPU 1 is now offline > [ 225.809481] lockdep: fixing up alternatives. > [ 225.809487] SMP alternatives: switching to UP code > [ 225.816500] Extended CMOS year: 2000 > [ 225.816500] Back to C! > [ 225.816500] Extended CMOS year: 2000 > [ 225.816720] Enabling non-boot CPUs ... > [ 225.818422] lockdep: fixing up alternatives. > [ 225.818425] SMP alternatives: switching to SMP code > [ 225.822188] Booting processor 1 APIC 0x1 ip 0x6000 > [ 225.818021] Initializing CPU#1 > [ 225.818021] CPU: Physical Processor ID: 0 > [ 225.818021] CPU: Processor Core ID: 1 > [ 225.913392] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > [ 225.937046] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 > [ 225.937053] platform microcode: firmware: requesting intel-ucode/06-0f-0d > [ 225.937179] firmware microcode: parent microcode should not be sleeping > [ 285.940840] CPU1 is up > [ 285.941309] ACPI: Waking up from system sleep state S3 > [ 285.991446] i915 0000:00:02.0: restoring config space at offset 0xf > (was 0x100, writing 0x10b) > [ 285.991465] i915 0000:00:02.0: restoring config space at offset 0x8 > (was 0x1, writing 0xefe9) > [ 285.991474] i915 0000:00:02.0: restoring config space at offset 0x6 > (was 0xc, writing 0xe000000c) > [ 285.991488] i915 0000:00:02.0: restoring config space at offset 0x1 > (was 0x900007, writing 0x900407) > [ 285.991554] pci 0000:00:02.1: restoring config space at offset 0x4 > (was 0x4, writing 0xf6b00004) > [ 285.991564] pci 0000:00:02.1: restoring config space at offset 0x1 > (was 0x900000, writing 0x900007) > [ 285.991594] uhci_hcd 0000:00:1a.0: restoring config space at offset > 0xf (was 0x100, writing 0x10a) > [ 285.991618] uhci_hcd 0000:00:1a.0: restoring config space at offset > 0x8 (was 0x1, writing 0x6f61) > [ 285.991643] uhci_hcd 0000:00:1a.0: restoring config space at offset > 0x1 (was 0x2900000, writing 0x2900001) > [ 285.991678] uhci_hcd 0000:00:1a.1: restoring config space at offset > 0xf (was 0x200, writing 0x207) > [ 285.991703] uhci_hcd 0000:00:1a.1: restoring config space at offset > 0x8 (was 0x1, writing 0x6f81) > [ 285.991727] uhci_hcd 0000:00:1a.1: restoring config space at offset > 0x1 (was 0x2900000, writing 0x2900001) > [ 285.991762] uhci_hcd 0000:00:1a.2: restoring config space at offset > 0xf (was 0x300, writing 0x305) > [ 285.991786] uhci_hcd 0000:00:1a.2: restoring config space at offset > 0x8 (was 0x1, writing 0x6fa1) > [ 285.991811] uhci_hcd 0000:00:1a.2: restoring config space at offset > 0x1 (was 0x2900000, writing 0x2900001) > [ 285.991895] ehci_hcd 0000:00:1a.7: restoring config space at offset > 0x1 (was 0x2900106, writing 0x2900102) > [ 285.991956] HDA Intel 0000:00:1b.0: restoring config space at > offset 0xf (was 0x100, writing 0x107) > [ 285.991991] HDA Intel 0000:00:1b.0: restoring config space at > offset 0x4 (was 0xfebfc004, writing 0xf6afc004) > [ 285.992000] HDA Intel 0000:00:1b.0: restoring config space at > offset 0x3 (was 0x0, writing 0x10) > [ 285.992011] HDA Intel 0000:00:1b.0: restoring config space at > offset 0x1 (was 0x100000, writing 0x100102) > [ 285.992068] pcieport 0000:00:1c.0: restoring config space at offset > 0xf (was 0x100, writing 0x20100) > [ 285.992090] pcieport 0000:00:1c.0: restoring config space at offset > 0x9 (was 0x10001, writing 0x44314421) > [ 285.992098] pcieport 0000:00:1c.0: restoring config space at offset > 0x8 (was 0x0, writing 0x44104400) > [ 285.992107] pcieport 0000:00:1c.0: restoring config space at offset > 0x7 (was 0x20000000, writing 0x2020) > [ 285.992115] pcieport 0000:00:1c.0: restoring config space at offset > 0x6 (was 0x0, writing 0xb0b00) > [ 285.992129] pcieport 0000:00:1c.0: restoring config space at offset > 0x3 (was 0x810000, writing 0x810010) > [ 285.992140] pcieport 0000:00:1c.0: restoring config space at offset > 0x1 (was 0x100000, writing 0x100507) > [ 285.992227] pcieport 0000:00:1c.1: restoring config space at offset > 0xf (was 0x200, writing 0x20200) > [ 285.992249] pcieport 0000:00:1c.1: restoring config space at offset > 0x9 (was 0x10001, writing 0x44514441) > [ 285.992257] pcieport 0000:00:1c.1: restoring config space at offset > 0x8 (was 0x0, writing 0xf690f690) > [ 285.992266] pcieport 0000:00:1c.1: restoring config space at offset > 0x7 (was 0x20000000, writing 0x3030) > [ 285.992275] pcieport 0000:00:1c.1: restoring config space at offset > 0x6 (was 0x0, writing 0xc0c00) > [ 285.992289] pcieport 0000:00:1c.1: restoring config space at offset > 0x3 (was 0x810000, writing 0x810010) > [ 285.992300] pcieport 0000:00:1c.1: restoring config space at offset > 0x1 (was 0x100000, writing 0x100507) > [ 285.992386] pcieport 0000:00:1c.4: restoring config space at offset > 0xf (was 0x100, writing 0x20100) > [ 285.992408] pcieport 0000:00:1c.4: restoring config space at offset > 0x9 (was 0x10001, writing 0x44714461) > [ 285.992417] pcieport 0000:00:1c.4: restoring config space at offset > 0x8 (was 0x0, writing 0xf680f680) > [ 285.992425] pcieport 0000:00:1c.4: restoring config space at offset > 0x7 (was 0x20000000, writing 0x4040) > [ 285.992434] pcieport 0000:00:1c.4: restoring config space at offset > 0x6 (was 0x0, writing 0x90900) > [ 285.992448] pcieport 0000:00:1c.4: restoring config space at offset > 0x3 (was 0x810000, writing 0x810010) > [ 285.992459] pcieport 0000:00:1c.4: restoring config space at offset > 0x1 (was 0x100000, writing 0x100407) > [ 285.992571] uhci_hcd 0000:00:1d.0: restoring config space at offset > 0x1 (was 0x2900005, writing 0x2900001) > [ 285.992606] uhci_hcd 0000:00:1d.1: restoring config space at offset > 0xf (was 0x200, writing 0x207) > [ 285.992630] uhci_hcd 0000:00:1d.1: restoring config space at offset > 0x8 (was 0x1, writing 0x6f21) > [ 285.992655] uhci_hcd 0000:00:1d.1: restoring config space at offset > 0x1 (was 0x2900000, writing 0x2900001) > [ 285.992689] uhci_hcd 0000:00:1d.2: restoring config space at offset > 0xf (was 0x300, writing 0x305) > [ 285.992714] uhci_hcd 0000:00:1d.2: restoring config space at offset > 0x8 (was 0x1, writing 0x6f41) > [ 285.992738] uhci_hcd 0000:00:1d.2: restoring config space at offset > 0x1 (was 0x2900000, writing 0x2900001) > [ 285.992823] ehci_hcd 0000:00:1d.7: restoring config space at offset > 0x1 (was 0x2900106, writing 0x2900102) > [ 285.992883] pci 0000:00:1e.0: restoring config space at offset 0x9 > (was 0x1fff1, writing 0x43f14001) > [ 285.992895] pci 0000:00:1e.0: restoring config space at offset 0x7 > (was 0x2280e0f0, writing 0x22805050) > [ 285.992903] pci 0000:00:1e.0: restoring config space at offset 0x6 > (was 0x20020200, writing 0x20030200) > [ 285.992997] pci 0000:00:1f.0: restoring config space at offset 0x1 > (was 0x2100007, writing 0x2100107) > [ 285.993041] ata_piix 0000:00:1f.2: restoring config space at offset > 0xf (was 0x400, writing 0x40a) > [ 285.993109] i801_smbus 0000:00:1f.3: restoring config space at > offset 0xf (was 0x200, writing 0x204) > [ 285.993144] i801_smbus 0000:00:1f.3: restoring config space at > offset 0x4 (was 0x4, writing 0xf6afbf04) > [ 285.993159] i801_smbus 0000:00:1f.3: restoring config space at > offset 0x1 (was 0x2800001, writing 0x2800103) > [ 285.993192] ata_piix 0000:00:1f.5: restoring config space at offset > 0xf (was 0x400, writing 0x40a) > [ 285.993214] ata_piix 0000:00:1f.5: restoring config space at offset > 0x9 (was 0x1, writing 0xeff1) > [ 285.993241] ata_piix 0000:00:1f.5: restoring config space at offset > 0x1 (was 0x2b00000, writing 0x2b00007) > [ 285.993557] b43-pci-bridge 0000:0c:00.0: restoring config space at > offset 0xf (was 0x100, writing 0x104) > [ 285.993632] b43-pci-bridge 0000:0c:00.0: restoring config space at > offset 0x4 (was 0x4, writing 0xf69fc004) > [ 285.993648] b43-pci-bridge 0000:0c:00.0: restoring config space at > offset 0x3 (was 0x0, writing 0x10) > [ 285.993669] b43-pci-bridge 0000:0c:00.0: restoring config space at > offset 0x1 (was 0x100000, writing 0x100106) > [ 285.993877] tg3 0000:09:00.0: restoring config space at offset 0x3 > (was 0x0, writing 0x10) > [ 285.993890] tg3 0000:09:00.0: restoring config space at offset 0x1 > (was 0x100000, writing 0x100106) > [ 285.993958] pci 0000:02:01.0: restoring config space at offset 0xf > (was 0x7000100, writing 0x700010a) > [ 285.993966] pci 0000:02:01.0: restoring config space at offset 0xe > (was 0x0, writing 0x51fc) > [ 285.993975] pci 0000:02:01.0: restoring config space at offset 0xd > (was 0x0, writing 0x5100) > [ 285.993983] pci 0000:02:01.0: restoring config space at offset 0xc > (was 0x0, writing 0x50fc) > [ 285.993992] pci 0000:02:01.0: restoring config space at offset 0xb > (was 0x0, writing 0x5000) > [ 285.994000] pci 0000:02:01.0: restoring config space at offset 0xa > (was 0x0, writing 0x4bfff000) > [ 285.994009] pci 0000:02:01.0: restoring config space at offset 0x9 > (was 0x0, writing 0x48000000) > [ 285.994017] pci 0000:02:01.0: restoring config space at offset 0x8 > (was 0x0, writing 0x43fff000) > [ 285.994026] pci 0000:02:01.0: restoring config space at offset 0x7 > (was 0x0, writing 0x40000000) > [ 285.994035] pci 0000:02:01.0: restoring config space at offset 0x6 > (was 0x0, writing 0xb0060302) > [ 285.994046] pci 0000:02:01.0: restoring config space at offset 0x4 > (was 0x0, writing 0xf6700000) > [ 285.994054] pci 0000:02:01.0: restoring config space at offset 0x3 > (was 0x820000, writing 0x824000) > [ 285.994066] pci 0000:02:01.0: restoring config space at offset 0x1 > (was 0x2100000, writing 0x2100107) > [ 285.994106] ohci1394 0000:02:01.1: restoring config space at offset > 0xf (was 0x4020200, writing 0x4020204) > [ 285.994146] ohci1394 0000:02:01.1: restoring config space at offset > 0x3 (was 0x800000, writing 0x804010) > [ 285.994159] ohci1394 0000:02:01.1: restoring config space at offset > 0x1 (was 0x2100000, writing 0x2100106) > [ 285.994197] sdhci-pci 0000:02:01.2: restoring config space at > offset 0xf (was 0x300, writing 0x303) > [ 285.994232] sdhci-pci 0000:02:01.2: restoring config space at > offset 0x4 (was 0x0, writing 0xf67ff700) > [ 285.994241] sdhci-pci 0000:02:01.2: restoring config space at > offset 0x3 (was 0x800000, writing 0x804010) > [ 285.994253] sdhci-pci 0000:02:01.2: restoring config space at > offset 0x1 (was 0x2100000, writing 0x2100106) > [ 286.009482] PM: Device PNP0C0D:00 failed to resume: error 1 > [ 286.039022] dell-wmi: Unknown key e044 pressed > [ 286.151069] i915 0000:00:02.0: setting latency timer to 64 > [ 286.243570] [drm] LVDS-8: set mode 1280x800 c > [ 286.290393] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ 286.290404] uhci_hcd 0000:00:1a.0: setting latency timer to 64 > [ 286.290441] usb usb3: root hub lost power or was reset > [ 286.290466] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > [ 286.290475] uhci_hcd 0000:00:1a.1: setting latency timer to 64 > [ 286.290505] usb usb4: root hub lost power or was reset > [ 286.290527] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > [ 286.290537] uhci_hcd 0000:00:1a.2: setting latency timer to 64 > [ 286.290565] usb usb5: root hub lost power or was reset > [ 286.290588] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > [ 286.290598] ehci_hcd 0000:00:1a.7: setting latency timer to 64 > [ 286.290613] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, > low) -> IRQ 21 > [ 286.290623] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 286.290689] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X > [ 286.290764] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ 286.290773] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 286.290801] usb usb6: root hub lost power or was reset > [ 286.290846] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > [ 286.290856] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 286.290887] usb usb7: root hub lost power or was reset > [ 286.290911] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > [ 286.290921] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 286.290950] usb usb8: root hub lost power or was reset > [ 286.290972] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ 286.290982] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 286.291001] pci 0000:00:1e.0: setting latency timer to 64 > [ 286.291018] ata_piix 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > [ 286.291025] ata_piix 0000:00:1f.2: setting latency timer to 64 > [ 286.291110] ata_piix 0000:00:1f.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > [ 286.291119] ata_piix 0000:00:1f.5: setting latency timer to 64 > [ 286.291394] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 > (level, low) -> IRQ 17 > [ 286.307121] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > [ 286.362261] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] > MMIO=[f67ff800-f67fffff] Max Packet=[2048] IR/IT contexts=[4/4] > [ 286.368333] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, > low) -> IRQ 18 > [ 286.383529] mmc0: Minimum clock frequency too high for identification mode > [ 286.423034] sd 0:0:0:0: [sda] Starting disk > [ 286.621595] ata3: SATA link down (SStatus 0 SControl 300) > [ 286.632845] ata4: SATA link down (SStatus 4 SControl 300) > [ 286.763599] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 286.763812] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 286.823841] ata2.00: configured for UDMA/100 > [ 287.027642] ata1.00: configured for UDMA/133 > [ 287.095609] PM: Finishing wakeup. > [ 287.095611] Restarting tasks ... done. > [ 457.056279] dell-wmi: Unknown key 48 pressed > [ 457.249535] dell-wmi: Unknown key 48 pressed > [ 457.423506] dell-wmi: Unknown key 48 pressed > [ 457.608626] dell-wmi: Unknown key 48 pressed > [ 457.788025] dell-wmi: Unknown key 48 pressed > [ 457.947402] dell-wmi: Unknown key 48 pressed > [ 460.438540] dell-wmi: Unknown key 48 pressed > [ 475.910065] dell-wmi: Unknown key 48 pressed > [ 476.103445] dell-wmi: Unknown key 48 pressed > [ 477.844084] dell-wmi: Unknown key 48 pressed > [ 478.093328] dell-wmi: Unknown key 48 pressed > [ 478.950676] dell-wmi: Unknown key 48 pressed > [ 479.229816] dell-wmi: Unknown key 48 pressed > [ 479.459126] dell-wmi: Unknown key 48 pressed > [ 479.658534] dell-wmi: Unknown key 48 pressed > [ 480.525933] dell-wmi: Unknown key 48 pressed > [ 480.748745] dell-wmi: Unknown key 48 pressed > [ 480.944699] dell-wmi: Unknown key 48 pressed > [ 549.103799] b43 ssb0:0: firmware: requesting b43/ucode15.fw > [ 549.215863] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw > [ 549.244516] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw > [ 549.403735] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) > [ 549.406244] b43-phy0 debug: b2062: Using crystal tab entry 19200 kHz. > [ 553.990808] b43-phy0 debug: Chip initialized > [ 553.991181] b43-phy0 debug: PIO initialized > [ 553.991297] b43-phy0 debug: QoS enabled > [ 554.010624] b43-phy0 debug: Wireless interface started > [ 554.018136] b43-phy0 debug: Adding Interface type 2 > [ 555.225635] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) > [ 555.227406] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) > [ 555.247446] wlan0: direct probe responded > [ 555.247504] wlan0: authenticate with AP 00:02:2d:08:51:2b (try 1) > [ 555.275021] wlan0: authenticated > [ 555.275905] wlan0: associate with AP 00:02:2d:08:51:2b (try 1) > [ 555.284599] wlan0: RX AssocResp from 00:02:2d:08:51:2b (capab=0x1 > status=0 aid=12) > [ 555.284608] wlan0: associated > [ 561.323866] mtrr: type mismatch for e0000000,10000000 old: > write-back new: write-combining > [ 2688.500033] No probe response from AP 00:02:2d:08:51:2b after > 500ms, disconnecting. > [ 2689.580376] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) > [ 2689.780643] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 2) > [ 2689.798772] wlan0: direct probe responded > [ 2689.798778] wlan0: authenticate with AP 00:02:2d:08:51:2b (try 1) > [ 2689.986996] wlan0: authenticated > [ 2689.987691] wlan0: associate with AP 00:02:2d:08:51:2b (try 1) > [ 2690.006697] wlan0: RX ReassocResp from 00:02:2d:08:51:2b (capab=0x1 > status=0 aid=1) > [ 2690.006706] wlan0: associated > > -- > Regards > dave > -- Regards dave ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly 2009-12-10 9:30 ` mmotm-2009-12-08-17-45 resume slowly Dave Young @ 2009-12-10 9:52 ` KOSAKI Motohiro 2009-12-10 22:11 ` Nigel Cunningham 2009-12-10 22:29 ` David Miller 0 siblings, 2 replies; 16+ messages in thread From: KOSAKI Motohiro @ 2009-12-10 9:52 UTC (permalink / raw) To: Dave Young Cc: kosaki.motohiro, Andrew Morton, Linux Kernel Mailing List, netdev (cc to netdev) Hi net-folks > > [ 561.323866] mtrr: type mismatch for e0000000,10000000 old: > > write-back new: write-combining > > [ 2688.500033] No probe response from AP 00:02:2d:08:51:2b after > > 500ms, disconnecting. > > [ 2689.580376] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) What's mean "No probe response"? Why its point waste 2000sec? (intentional full quote) > Sorry forgot cc list > > > On Thu, Dec 10, 2009 at 5:27 PM, Dave Young <hidave.darkstar@gmail.com> wrote: > > Hi, > > > > With rencent mm patch sets (since 2.6.32), the resume is too slow with > > screen being black over 5 minutes > > > > (Dell e5400 with intel graphic card) > > > > Here is the full dmesg: > > > > [ 0.000000] Initializing cgroup subsys cpuset > > [ 0.000000] Initializing cgroup subsys cpu > > [ 0.000000] Linux version 2.6.32-mm1 (dave@darkstar) (gcc version > > 4.2.4) #5 SMP Thu Dec 10 15:23:34 CST 2009 > > [ 0.000000] BIOS-provided physical RAM map: > > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) > > [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) > > [ 0.000000] BIOS-e820: 0000000000100000 - 000000003d38d400 (usable) > > [ 0.000000] BIOS-e820: 000000003d38d400 - 000000003d38f400 (ACPI NVS) > > [ 0.000000] BIOS-e820: 000000003d38f400 - 0000000040000000 (reserved) > > [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) > > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > > [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) > > [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) > > [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) > > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) > > [ 0.000000] BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved) > > [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU > > or disabled in BIOS! > > [ 0.000000] DMI 2.4 present. > > [ 0.000000] last_pfn = 0x3d38d max_arch_pfn = 0x100000 > > [ 0.000000] MTRR default type: uncachable > > [ 0.000000] MTRR fixed ranges enabled: > > [ 0.000000] 00000-9FFFF write-back > > [ 0.000000] A0000-BFFFF uncachable > > [ 0.000000] C0000-CFFFF write-protect > > [ 0.000000] D0000-EFFFF uncachable > > [ 0.000000] F0000-FFFFF write-protect > > [ 0.000000] MTRR variable ranges enabled: > > [ 0.000000] 0 base 000000000 mask C00000000 write-back > > [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable > > [ 0.000000] 2 base 03DC00000 mask FFFC00000 uncachable > > [ 0.000000] 3 base 03E000000 mask FFE000000 uncachable > > [ 0.000000] 4 base 03DB00000 mask FFFF00000 uncachable > > [ 0.000000] 5 disabled > > [ 0.000000] 6 disabled > > [ 0.000000] 7 disabled > > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > > [ 0.000000] e820 update range: 000000003db00000 - 0000000040000000 > > (usable) ==> (reserved) > > [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 > > (usable) ==> (reserved) > > [ 0.000000] initial memory mapped : 0 - 02000000 > > [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 > > [ 0.000000] 0000000000 - 0000400000 page 4k > > [ 0.000000] 0000400000 - 0037400000 page 2M > > [ 0.000000] 0037400000 - 00377fe000 page 4k > > [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 > > [ 0.000000] ACPI: RSDP 000fbce0 00024 (v02 DELL ) > > [ 0.000000] ACPI: XSDT 3d391e00 00064 (v01 DELL M09 27D9041D > > ASL 00000061) > > [ 0.000000] ACPI: FACP 3d391c9c 000F4 (v04 DELL M09 27D9041D > > ASL 00000061) > > [ 0.000000] ACPI: DSDT 3d392400 06857 (v02 INT430 SYSFexxx 00001001 > > INTL 20050624) > > [ 0.000000] ACPI: FACS 3d3a0c00 00040 > > [ 0.000000] ACPI: HPET 3d391f00 00038 (v01 DELL M09 00000001 > > ASL 00000061) > > [ 0.000000] ACPI: DMAR 3d3a0400 000F8 (v01 DELL M09 27D9041D > > ASL 00000061) > > [ 0.000000] ACPI: APIC 3d392000 00068 (v01 DELL M09 27D9041D > > ASL 00000047) > > [ 0.000000] ACPI: ASF! 3d391c00 00076 (v32 DELL M09 27D9041D > > ASL 00000061) > > [ 0.000000] ACPI: MCFG 3d391fc0 0003E (v16 DELL M09 27D9041D > > ASL 00000061) > > [ 0.000000] ACPI: TCPA 3d392300 00032 (v01 00000000 > > ASL 00000000) > > [ 0.000000] ACPI: SSDT 3d3902e7 0066C (v01 PmRef CpuPm 00003000 > > INTL 20050624) > > [ 0.000000] ACPI: Local APIC address 0xfee00000 > > [ 0.000000] 91MB HIGHMEM available. > > [ 0.000000] 887MB LOWMEM available. > > [ 0.000000] mapped low ram: 0 - 377fe000 > > [ 0.000000] low ram: 0 - 377fe000 > > [ 0.000000] node 0 low ram: 00000000 - 377fe000 > > [ 0.000000] node 0 bootmap 00008000 - 0000ef00 > > [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] > > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> > > [0000000000 - 0000001000] > > [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> > > [0000001000 - 0000002000] > > [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> > > [0000006000 - 0000007000] > > [ 0.000000] #3 [0001000000 - 0001c1ed78] TEXT DATA BSS ==> > > [0001000000 - 0001c1ed78] > > [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> > > [000009f000 - 0000100000] > > [ 0.000000] #5 [0001c1f000 - 0001c27184] BRK ==> > > [0001c1f000 - 0001c27184] > > [ 0.000000] #6 [0000002000 - 0000006000] ACPI WAKEUP ==> > > [0000002000 - 0000006000] > > [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> > > [0000007000 - 0000008000] > > [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> > > [0000008000 - 000000f000] > > [ 0.000000] sizeof(struct page) = 32 > > [ 0.000000] Zone PFN ranges: > > [ 0.000000] DMA 0x00000000 -> 0x00001000 > > [ 0.000000] Normal 0x00001000 -> 0x000377fe > > [ 0.000000] HighMem 0x000377fe -> 0x0003d38d > > [ 0.000000] Movable zone start PFN for each node > > [ 0.000000] early_node_map[2] active PFN ranges > > [ 0.000000] 0: 0x00000000 -> 0x0000009f > > [ 0.000000] 0: 0x00000100 -> 0x0003d38d > > [ 0.000000] On node 0 totalpages: 250668 > > [ 0.000000] Node 0 memmap at 0xc1c29000 size 8028160 first pfn 0xc1c29000 > > [ 0.000000] free_area_init_node: node 0, pgdat c162db40, > > node_mem_map c1c29000 > > [ 0.000000] DMA zone: 32 pages used for memmap > > [ 0.000000] DMA zone: 0 pages reserved > > [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 > > [ 0.000000] Normal zone: 1744 pages used for memmap > > [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 > > [ 0.000000] HighMem zone: 184 pages used for memmap > > [ 0.000000] HighMem zone: 23255 pages, LIFO batch:3 > > [ 0.000000] Using APIC driver default > > [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 > > [ 0.000000] ACPI: Local APIC address 0xfee00000 > > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > [ 0.000000] ACPI: IRQ0 used by override. > > [ 0.000000] ACPI: IRQ2 used by override. > > [ 0.000000] ACPI: IRQ9 used by override. > > [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs > > [ 0.000000] Using ACPI (MADT) for SMP configuration information > > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > > [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs > > [ 0.000000] nr_irqs_gsi: 24 > > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 > > [ 0.000000] Allocating PCI resources starting at 40000000 (gap: > > 40000000:b8000000) > > [ 0.000000] Booting paravirtualized kernel on bare hardware > > [ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 > > [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s33048 r0 d24296 u2097152 > > [ 0.000000] pcpu-alloc: s33048 r0 d24296 u2097152 alloc=1*4194304 > > [ 0.000000] pcpu-alloc: [0] 0 1 > > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > > Total pages: 248708 > > [ 0.000000] Kernel command line: BOOT_IMAGE=mm ro root=802 > > vt.default_utf8=0 resume=/dev/sda8 > > [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) > > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > > [ 0.000000] Enabling fast FPU save and restore... done. > > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > > [ 0.000000] Initializing CPU#0 > > [ 0.000000] Initializing HighMem for node 0 (000377fe:0003d38d) > > [ 0.000000] Memory: 980956k/1003060k available (3904k kernel code, > > 21272k reserved, 2488k data, 408k init, 93756k highmem) > > [ 0.000000] virtual kernel memory layout: > > [ 0.000000] fixmap : 0xfff90000 - 0xfffff000 ( 444 kB) > > [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) > > [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) > > [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) > > [ 0.000000] .init : 0xc163f000 - 0xc16a5000 ( 408 kB) > > [ 0.000000] .data : 0xc13d0244 - 0xc163e5a0 (2488 kB) > > [ 0.000000] .text : 0xc1000000 - 0xc13d0244 (3904 kB) > > [ 0.000000] Checking if this processor honours the WP bit even in > > supervisor mode...Ok. > > [ 0.000000] Hierarchical RCU implementation. > > [ 0.000000] NR_IRQS:320 > > [ 0.000000] Extended CMOS year: 2000 > > [ 0.000000] Console: colour dummy device 80x25 > > [ 0.000000] console [tty0] enabled > > [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, > > Inc., Ingo Molnar > > [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 > > [ 0.000000] ... MAX_LOCK_DEPTH: 48 > > [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 > > [ 0.000000] ... CLASSHASH_SIZE: 4096 > > [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 > > [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 > > [ 0.000000] ... CHAINHASH_SIZE: 16384 > > [ 0.000000] memory used by lock dependency info: 3567 kB > > [ 0.000000] per task-struct memory footprint: 1152 bytes > > [ 0.000000] hpet clockevent registered > > [ 0.000000] Fast TSC calibration using PIT > > [ 0.000000] Detected 1995.100 MHz processor. > > [ 0.003349] Calibrating delay loop (skipped), value calculated > > using timer frequency.. 3991.45 BogoMIPS (lpj=6650333) > > [ 0.003611] Security Framework initialized > > [ 0.003717] Mount-cache hash table entries: 512 > > [ 0.006964] Initializing cgroup subsys ns > > [ 0.006972] Initializing cgroup subsys cpuacct > > [ 0.007103] CPU: Physical Processor ID: 0 > > [ 0.007108] CPU: Processor Core ID: 0 > > [ 0.007114] using mwait in idle threads. > > [ 0.007122] Performance Events: Core2 events, Intel PMU driver. > > [ 0.007153] ... version: 2 > > [ 0.007158] ... bit width: 40 > > [ 0.007163] ... generic registers: 2 > > [ 0.007168] ... value mask: 000000ffffffffff > > [ 0.007173] ... max period: 000000007fffffff > > [ 0.007179] ... fixed-purpose events: 3 > > [ 0.007184] ... event mask: 0000000700000003 > > [ 0.007199] Checking 'hlt' instruction... OK. > > [ 0.021587] ACPI: Core revision 20091112 > > [ 0.043974] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > > [ 0.079689] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > > [ 0.079999] lockdep: fixing up alternatives. > > [ 0.079999] Booting processor 1 APIC 0x1 ip 0x6000 > > [ 0.079999] Initializing CPU#1 > > [ 0.079999] CPU: Physical Processor ID: 0 > > [ 0.079999] CPU: Processor Core ID: 1 > > [ 0.170015] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > > [ 0.173386] Brought up 2 CPUs > > [ 0.173393] Total of 2 processors activated (7983.61 BogoMIPS). > > [ 0.175046] khelper used greatest stack depth: 6928 bytes left > > [ 0.175046] regulator: core version 0.5 > > [ 0.176722] Time: 15:30:08 Date: 12/10/09 > > [ 0.176823] khelper used greatest stack depth: 6728 bytes left > > [ 0.176984] NET: Registered protocol family 16 > > [ 0.180083] ACPI: bus type pci registered > > [ 0.180201] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem > > 0xf8000000-0xfbffffff] (base 0xf8000000) > > [ 0.180201] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 > > [ 0.180201] PCI: Using MMCONFIG for extended config space > > [ 0.180201] PCI: Using configuration type 1 for base access > > [ 0.203625] bio: create slab <bio-0> at 0 > > [ 0.213198] ACPI: EC: Look up EC in DSDT > > [ 0.213825] ACPI: BIOS _OSI(Linux) query ignored > > [ 0.276349] ACPI: SSDT 3d3a0c80 00043 (v01 LMPWR DELLLOM 00001001 > > INTL 20050624) > > [ 0.323792] ACPI: Interpreter enabled > > [ 0.323804] ACPI: (supports S0 S3 S4 S5) > > [ 0.323895] ACPI: Using IOAPIC for interrupt routing > > [ 0.490535] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930 > > [ 0.493757] ACPI: No dock devices found. > > [ 0.529913] ACPI: PCI Root Bridge [PCI0] (0000:00) > > [ 0.530130] pci_root PNP0A03:00: ignoring host bridge windows from > > ACPI; boot with "pci=use_crs" to use them > > [ 0.600625] pci_root PNP0A03:00: host bridge window [io > > 0x0000-0x0cf7] (ignored) > > [ 0.600630] pci_root PNP0A03:00: host bridge window [io > > 0x0d00-0xffff] (ignored) > > [ 0.600634] pci_root PNP0A03:00: host bridge window [mem > > 0x000a0000-0x000bffff] (ignored) > > [ 0.600637] pci_root PNP0A03:00: host bridge window [mem > > 0x000d0000-0x000dffff] (ignored) > > [ 0.600641] pci_root PNP0A03:00: host bridge window [mem > > 0x40000000-0xf7ffffff] (ignored) > > [ 0.600645] pci_root PNP0A03:00: host bridge window [mem > > 0xfc000000-0xfebfffff] (ignored) > > [ 0.600648] pci_root PNP0A03:00: host bridge window [mem > > 0xfec10000-0xfecfffff] (ignored) > > [ 0.600652] pci_root PNP0A03:00: host bridge window [mem > > 0xfed1c000-0xfed1ffff] (ignored) > > [ 0.600656] pci_root PNP0A03:00: host bridge window [mem > > 0xfed90000-0xfed9ffff] (ignored) > > [ 0.600659] pci_root PNP0A03:00: host bridge window [mem > > 0xfed40000-0xfed44fff] (ignored) > > [ 0.600663] pci_root PNP0A03:00: host bridge window [mem > > 0xfeda7000-0xfedfffff] (ignored) > > [ 0.600667] pci_root PNP0A03:00: host bridge window [mem > > 0xfee10000-0xff9fffff] (ignored) > > [ 0.600670] pci_root PNP0A03:00: host bridge window [mem > > 0xffb80000-0xffe7ffff] (ignored) > > [ 0.600882] pci 0000:00:02.0: reg 10: [mem 0xf6c00000-0xf6ffffff 64bit] > > [ 0.600897] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] > > [ 0.600906] pci 0000:00:02.0: reg 20: [io 0xefe8-0xefef] > > [ 0.600999] pci 0000:00:02.1: reg 10: [mem 0xf6b00000-0xf6bfffff 64bit] > > [ 0.601223] pci 0000:00:1a.0: reg 20: [io 0x6f60-0x6f7f] > > [ 0.601374] pci 0000:00:1a.1: reg 20: [io 0x6f80-0x6f9f] > > [ 0.601525] pci 0000:00:1a.2: reg 20: [io 0x6fa0-0x6fbf] > > [ 0.601673] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] > > [ 0.601783] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > > [ 0.601791] pci 0000:00:1a.7: PME# disabled > > [ 0.601875] pci 0000:00:1b.0: reg 10: [mem 0xf6afc000-0xf6afffff 64bit] > > [ 0.601974] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > > [ 0.601981] pci 0000:00:1b.0: PME# disabled > > [ 0.602144] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > > [ 0.602151] pci 0000:00:1c.0: PME# disabled > > [ 0.602322] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > > [ 0.602329] pci 0000:00:1c.1: PME# disabled > > [ 0.602501] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > > [ 0.602509] pci 0000:00:1c.4: PME# disabled > > [ 0.602629] pci 0000:00:1d.0: reg 20: [io 0x6f00-0x6f1f] > > [ 0.602783] pci 0000:00:1d.1: reg 20: [io 0x6f20-0x6f3f] > > [ 0.602934] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] > > [ 0.603078] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] > > [ 0.603187] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > > [ 0.603195] pci 0000:00:1d.7: PME# disabled > > [ 0.603580] pci 0000:00:1f.2: reg 10: [io 0x6e70-0x6e77] > > [ 0.603592] pci 0000:00:1f.2: reg 14: [io 0x6e78-0x6e7b] > > [ 0.603604] pci 0000:00:1f.2: reg 18: [io 0x6e80-0x6e87] > > [ 0.603616] pci 0000:00:1f.2: reg 1c: [io 0x6e88-0x6e8b] > > [ 0.603628] pci 0000:00:1f.2: reg 20: [io 0x6ea0-0x6eaf] > > [ 0.603640] pci 0000:00:1f.2: reg 24: [io 0x6e90-0x6e9f] > > [ 0.603762] pci 0000:00:1f.3: reg 10: [mem 0xf6afbf00-0xf6afbfff 64bit] > > [ 0.603793] pci 0000:00:1f.3: reg 20: [io 0x1100-0x111f] > > [ 0.603905] pci 0000:00:1f.5: reg 10: [io 0x6eb0-0x6eb7] > > [ 0.603917] pci 0000:00:1f.5: reg 14: [io 0x6eb8-0x6ebb] > > [ 0.603929] pci 0000:00:1f.5: reg 18: [io 0x6ec0-0x6ec7] > > [ 0.603941] pci 0000:00:1f.5: reg 1c: [io 0x6ec8-0x6ecb] > > [ 0.603953] pci 0000:00:1f.5: reg 20: [io 0x6ee0-0x6eef] > > [ 0.603965] pci 0000:00:1f.5: reg 24: [io 0xeff0-0xefff] > > [ 0.604140] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] > > [ 0.604519] pci 0000:0c:00.0: reg 10: [mem 0xf69fc000-0xf69fffff 64bit] > > [ 0.604778] pci 0000:0c:00.0: supports D1 D2 > > [ 0.604781] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold > > [ 0.604796] pci 0000:0c:00.0: PME# disabled > > [ 0.604958] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] > > [ 0.604974] pci 0000:00:1c.1: bridge window [mem 0xf6900000-0xf69fffff] > > [ 0.605134] pci 0000:09:00.0: reg 10: [mem 0xf68f0000-0xf68fffff 64bit] > > [ 0.605282] pci 0000:09:00.0: PME# supported from D3hot D3cold > > [ 0.605291] pci 0000:09:00.0: PME# disabled > > [ 0.605402] pci 0000:00:1c.4: PCI bridge to [bus 09-09] > > [ 0.605418] pci 0000:00:1c.4: bridge window [mem 0xf6800000-0xf68fffff] > > [ 0.605503] pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff] > > [ 0.605541] pci 0000:02:01.0: supports D1 D2 > > [ 0.605544] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold > > [ 0.605552] pci 0000:02:01.0: PME# disabled > > [ 0.605617] pci 0000:02:01.1: reg 10: [mem 0xf67ff800-0xf67fffff] > > [ 0.605711] pci 0000:02:01.1: supports D1 D2 > > [ 0.605714] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold > > [ 0.605721] pci 0000:02:01.1: PME# disabled > > [ 0.605790] pci 0000:02:01.2: reg 10: [mem 0xf67ff700-0xf67ff7ff] > > [ 0.605884] pci 0000:02:01.2: supports D1 D2 > > [ 0.605887] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold > > [ 0.605895] pci 0000:02:01.2: PME# disabled > > [ 0.606011] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode) > > [ 0.606028] pci 0000:00:1e.0: bridge window [mem 0xf6700000-0xf67fffff] > > [ 0.606075] pci_bus 0000:03: [bus 03-06] partially hidden behind > > transparent bridge 0000:02 [bus 02-03] > > [ 0.606125] pci_bus 0000:00: on NUMA node 0 > > [ 0.606134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > > [ 0.607778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] > > [ 0.608386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > > [ 0.608653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > > [ 0.608946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] > > [ 0.667029] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) > > [ 0.667370] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4 > > [ 0.667708] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *3 > > [ 0.668044] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) > > [ 0.668382] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) > > [ 0.670294] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) > > [ 0.670639] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) > > [ 0.670927] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 > > 12 14 15) *0, disabled. > > [ 0.671151] vgaarb: device added: > > PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > > [ 0.671151] vgaarb: loaded > > [ 0.673347] SCSI subsystem initialized > > [ 0.673534] libata version 3.00 loaded. > > [ 0.673633] usbcore: registered new interface driver usbfs > > [ 0.673633] usbcore: registered new interface driver hub > > [ 0.673633] usbcore: registered new device driver usb > > [ 0.673697] PCI: Using ACPI for IRQ routing > > [ 0.673697] PCI: pci_cache_line_size set to 64 bytes > > [ 0.677479] HPET: 4 timers in total, 0 timers will be used for per-cpu timer > > [ 0.677479] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 > > [ 0.677479] hpet0: 4 comparators, 64-bit 14.318180 MHz counter > > [ 0.686678] Switching to clocksource tsc > > [ 0.698122] pnp: PnP ACPI init > > [ 0.698167] ACPI: bus type pnp registered > > [ 0.810987] pnp: PnP ACPI: found 13 devices > > [ 0.810996] ACPI: ACPI bus type pnp unregistered > > [ 0.811028] system 00:05: [io 0x0c80-0x0caf] has been reserved > > [ 0.811038] system 00:05: [io 0x0cc0-0x0cff] could not be reserved > > [ 0.811062] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved > > [ 0.811085] system 00:09: [io 0x0cb0-0x0cbb] has been reserved > > [ 0.811104] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved > > [ 0.811126] system 00:0a: [io 0x0900-0x092f] has been reserved > > [ 0.811135] system 00:0a: [io 0x0931-0x0933] has been reserved > > [ 0.811144] system 00:0a: [io 0x0935-0x097f] has been reserved > > [ 0.811152] system 00:0a: [io 0x04d0-0x04d1] has been reserved > > [ 0.811161] system 00:0a: [io 0x1000-0x1005] has been reserved > > [ 0.811170] system 00:0a: [io 0x1008-0x100f] has been reserved > > [ 0.811192] system 00:0b: [io 0xf400-0xf4fe] has been reserved > > [ 0.811201] system 00:0b: [io 0x1006-0x1007] has been reserved > > [ 0.811211] system 00:0b: [io 0x100a-0x1059] could not be reserved > > [ 0.811219] system 00:0b: [io 0x1060-0x107f] has been reserved > > [ 0.811228] system 00:0b: [io 0x1080-0x10bf] has been reserved > > [ 0.811236] system 00:0b: [io 0x1100-0x111f] has been reserved > > [ 0.811245] system 00:0b: [io 0x1010-0x102f] has been reserved > > [ 0.811253] system 00:0b: [io 0x0809] has been reserved > > [ 0.811276] system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved > > [ 0.811287] system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved > > [ 0.811297] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved > > [ 0.811307] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved > > [ 0.811318] system 00:0c: [mem 0x00100000-0x3d38d3ff] could not be reserved > > [ 0.811328] system 00:0c: [mem 0x3d38d400-0x3dafffff] could not be reserved > > [ 0.811338] system 00:0c: [mem 0x3db00000-0x3dbfffff] has been reserved > > [ 0.811347] system 00:0c: [mem 0xffe80000-0xffffffff] has been reserved > > [ 0.811356] system 00:0c: [mem 0xffa00000-0xffb7ffff] has been reserved > > [ 0.811366] system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved > > [ 0.811376] system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved > > [ 0.811385] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved > > [ 0.811394] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved > > [ 0.811403] system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved > > [ 0.811413] system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved > > [ 0.811423] system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved > > [ 0.811432] system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved > > [ 0.811441] system 00:0c: [mem 0xfed1c800-0xfed1cfff] has been reserved > > [ 0.811451] system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved > > [ 0.811460] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved > > [ 0.848952] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 > > (level, low) -> IRQ 17 > > [ 0.848977] b43-pci-bridge 0000:0c:00.0: setting latency timer to 64 > > [ 0.863385] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243) > > [ 0.863405] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, > > vendor 0x4243) > > [ 0.863425] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243) > > [ 0.863445] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243) > > [ 0.879792] ssb: Found rev 1 PMU (capabilities 0x02A62F01) > > [ 0.889038] ssb: SPROM revision 8 detected. > > [ 0.903507] ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0 > > [ 0.903853] pci 0000:00:1e.0: BAR 9: assigned [mem > > 0x40000000-0x43ffffff pref] > > [ 0.903864] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff] > > [ 0.903873] pci 0000:00:1c.0: BAR 9: assigned [mem > > 0x44200000-0x443fffff 64bit pref] > > [ 0.903883] pci 0000:00:1c.1: BAR 9: assigned [mem > > 0x44400000-0x445fffff 64bit pref] > > [ 0.903893] pci 0000:00:1c.4: BAR 9: assigned [mem > > 0x44600000-0x447fffff 64bit pref] > > [ 0.903903] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] > > [ 0.903911] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] > > [ 0.903919] pci 0000:00:1c.4: BAR 7: assigned [io 0x4000-0x4fff] > > [ 0.903927] pci 0000:00:1e.0: BAR 7: assigned [io 0x5000-0x5fff] > > [ 0.903935] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] > > [ 0.903944] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] > > [ 0.903958] pci 0000:00:1c.0: bridge window [mem 0x44000000-0x441fffff] > > [ 0.903970] pci 0000:00:1c.0: bridge window [mem > > 0x44200000-0x443fffff 64bit pref] > > [ 0.903987] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] > > [ 0.903996] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] > > [ 0.904009] pci 0000:00:1c.1: bridge window [mem 0xf6900000-0xf69fffff] > > [ 0.904021] pci 0000:00:1c.1: bridge window [mem > > 0x44400000-0x445fffff 64bit pref] > > [ 0.904038] pci 0000:00:1c.4: PCI bridge to [bus 09-09] > > [ 0.904047] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] > > [ 0.904061] pci 0000:00:1c.4: bridge window [mem 0xf6800000-0xf68fffff] > > [ 0.904073] pci 0000:00:1c.4: bridge window [mem > > 0x44600000-0x447fffff 64bit pref] > > [ 0.904094] pci 0000:02:01.0: BAR 9: assigned [mem > > 0x40000000-0x43ffffff pref] > > [ 0.904105] pci 0000:02:01.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] > > [ 0.904113] pci 0000:02:01.0: BAR 0: assigned [mem 0xf6700000-0xf6700fff] > > [ 0.904126] pci 0000:02:01.0: BAR 0: set to [mem > > 0xf6700000-0xf6700fff] (PCI address [0xf6700000-0xf6700fff] > > [ 0.904137] pci 0000:02:01.0: BAR 7: assigned [io 0x5000-0x50ff] > > [ 0.904145] pci 0000:02:01.0: BAR 8: assigned [io 0x5100-0x51ff] > > [ 0.904152] pci 0000:02:01.0: CardBus bridge to [bus 03-06] > > [ 0.904159] pci 0000:02:01.0: bridge window [io 0x5000-0x50ff] > > [ 0.904170] pci 0000:02:01.0: bridge window [io 0x5100-0x51ff] > > [ 0.904182] pci 0000:02:01.0: bridge window [mem > > 0x40000000-0x43ffffff pref] > > [ 0.904194] pci 0000:02:01.0: bridge window [mem 0x48000000-0x4bffffff] > > [ 0.904206] pci 0000:00:1e.0: PCI bridge to [bus 02-03] > > [ 0.904214] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff] > > [ 0.904228] pci 0000:00:1e.0: bridge window [mem 0xf6700000-0xf67fffff] > > [ 0.904240] pci 0000:00:1e.0: bridge window [mem > > 0x40000000-0x43ffffff pref] > > [ 0.904273] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > [ 0.904285] pci 0000:00:1c.0: setting latency timer to 64 > > [ 0.904302] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > > [ 0.904314] pci 0000:00:1c.1: setting latency timer to 64 > > [ 0.904330] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > [ 0.904342] pci 0000:00:1c.4: setting latency timer to 64 > > [ 0.904355] pci 0000:00:1e.0: setting latency timer to 64 > > [ 0.904375] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > > [ 0.904388] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] > > [ 0.904392] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] > > [ 0.904395] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff] > > [ 0.904398] pci_bus 0000:0b: resource 1 [mem 0x44000000-0x441fffff] > > [ 0.904402] pci_bus 0000:0b: resource 2 [mem 0x44200000-0x443fffff > > 64bit pref] > > [ 0.904405] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff] > > [ 0.904408] pci_bus 0000:0c: resource 1 [mem 0xf6900000-0xf69fffff] > > [ 0.904412] pci_bus 0000:0c: resource 2 [mem 0x44400000-0x445fffff > > 64bit pref] > > [ 0.904415] pci_bus 0000:09: resource 0 [io 0x4000-0x4fff] > > [ 0.904418] pci_bus 0000:09: resource 1 [mem 0xf6800000-0xf68fffff] > > [ 0.904422] pci_bus 0000:09: resource 2 [mem 0x44600000-0x447fffff > > 64bit pref] > > [ 0.904425] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] > > [ 0.904428] pci_bus 0000:02: resource 1 [mem 0xf6700000-0xf67fffff] > > [ 0.904432] pci_bus 0000:02: resource 2 [mem 0x40000000-0x43ffffff pref] > > [ 0.904435] pci_bus 0000:02: resource 3 [io 0x0000-0xffff] > > [ 0.904438] pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffff] > > [ 0.904441] pci_bus 0000:03: resource 0 [io 0x5000-0x50ff] > > [ 0.904444] pci_bus 0000:03: resource 1 [io 0x5100-0x51ff] > > [ 0.904447] pci_bus 0000:03: resource 2 [mem 0x40000000-0x43ffffff pref] > > [ 0.904451] pci_bus 0000:03: resource 3 [mem 0x48000000-0x4bffffff] > > [ 0.904632] NET: Registered protocol family 2 > > [ 0.904933] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > > [ 0.905890] TCP established hash table entries: 131072 (order: 8, > > 1048576 bytes) > > [ 0.906395] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) > > [ 0.914821] TCP: Hash tables configured (established 131072 bind 65536) > > [ 0.914889] TCP reno registered > > [ 0.914906] UDP hash table entries: 512 (order: 3, 40960 bytes) > > [ 0.915056] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) > > [ 0.915548] NET: Registered protocol family 1 > > [ 0.915594] pci 0000:00:02.0: Boot video device > > [ 0.916138] PCI: CLS 64 bytes, default 64 > > [ 0.920703] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3 > > [ 0.920737] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 > > [ 0.920934] Microcode Update Driver: v2.00 > > <tigran@aivazian.fsnet.co.uk>, Peter Oruba > > [ 0.921968] audit: initializing netlink socket (disabled) > > [ 0.922049] type=2000 audit(1260459007.916:1): initialized > > [ 0.930909] highmem bounce pool size: 64 pages > > [ 0.930924] HugeTLB registered 4 MB page size, pre-allocated 0 pages > > [ 0.931615] VFS: Disk quotas dquot_6.5.2 > > [ 0.931702] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > > [ 0.933146] Btrfs loaded > > [ 0.933162] msgmni has been set to 1733 > > [ 0.934396] alg: No test for stdrng (krng) > > [ 0.934614] Block layer SCSI generic (bsg) driver version 0.4 > > loaded (major 253) > > [ 0.934641] io scheduler noop registered > > [ 0.934647] io scheduler deadline registered > > [ 0.934697] io scheduler cfq registered (default) > > [ 0.935545] pcieport 0000:00:1c.0: setting latency timer to 64 > > [ 0.935634] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X > > [ 0.936286] pcieport 0000:00:1c.1: setting latency timer to 64 > > [ 0.936377] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X > > [ 0.937034] pcieport 0000:00:1c.4: setting latency timer to 64 > > [ 0.937118] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X > > [ 0.938238] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > > [ 0.939692] ALI M7101 PMU not found. > > [ 0.940148] vesafb: framebuffer at 0xe0000000, mapped to > > 0xf8080000, using 3072k, total 32704k > > [ 0.940158] vesafb: mode is 1024x768x16, linelength=2048, pages=20 > > [ 0.940165] vesafb: scrolling: redraw > > [ 0.940171] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > > [ 0.953782] Console: switching to colour frame buffer device 128x48 > > [ 0.966131] fb0: VESA VGA frame buffer device > > [ 0.967114] ACPI: AC Adapter [AC] (on-line) > > [ 0.968048] input: Lid Switch as > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 > > [ 0.970682] ACPI: Lid Switch [LID] > > [ 0.971064] input: Power Button as > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 > > [ 0.971270] ACPI: Power Button [PBTN] > > [ 0.971668] input: Sleep Button as > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 > > [ 0.971869] ACPI: Sleep Button [SBTN] > > [ 0.973787] ACPI: SSDT 3d390953 002C3 (v01 PmRef BspIst 00003000 > > INTL 20050624) > > [ 0.976373] ACPI: SSDT 3d390ded 005C6 (v01 PmRef BspCst 00003001 > > INTL 20050624) > > [ 0.978792] Monitor-Mwait will be used to enter C-1 state > > [ 0.978888] Monitor-Mwait will be used to enter C-2 state > > [ 0.978969] Monitor-Mwait will be used to enter C-3 state > > [ 0.978985] Marking TSC unstable due to TSC halts in idle > > [ 0.979117] Switching to clocksource hpet > > [ 0.980233] processor LNXCPU:00: registered as cooling_device0 > > [ 0.981727] ACPI: SSDT 3d390c16 001D7 (v01 PmRef ApIst 00003000 > > INTL 20050624) > > [ 0.984297] ACPI: SSDT 3d3913b3 0008D (v01 PmRef ApCst 00003000 > > INTL 20050624) > > [ 0.987470] processor LNXCPU:01: registered as cooling_device1 > > [ 1.036564] thermal LNXTHERM:01: registered as thermal_zone0 > > [ 1.036744] ACPI: Thermal Zone [THM] (50 C) > > [ 1.057169] Non-volatile memory driver v1.3 > > [ 1.058010] i8k: unable to get SMM BIOS version > > [ 1.058127] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal > > Zotto (dz@debian.org) > > [ 1.058728] Linux agpgart interface v0.103 > > [ 1.059781] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 > > Express Chipset > > [ 1.066202] agpgart-intel 0000:00:00.0: detected 32764K stolen memory > > [ 1.075474] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 > > [ 1.081183] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 > > seconds, margin is 60 seconds). > > [ 1.086768] Hangcheck: Using get_cycles(). > > [ 1.092487] [drm] Initialized drm 1.1.0 20060810 > > [ 1.098041] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > [ 1.103610] i915 0000:00:02.0: setting latency timer to 64 > > [ 1.109032] mtrr: type mismatch for e0000000,10000000 old: > > write-back new: write-combining > > [ 1.114711] [drm] MTRR allocation failed. Graphics performance may suffer. > > [ 1.120525] i915 0000:00:02.0: irq 27 for MSI/MSI-X > > [ 1.120541] [drm] set up 31M of stolen space > > [ 1.173585] ACPI: Battery Slot [BAT0] (battery present) > > [ 1.743361] [drm] TV-21: set mode NTSC 480i 0 > > [ 1.917419] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - > > removing generic driver > > [ 1.923290] Console: switching to colour dummy device 80x25 > > [ 1.993413] [drm] LVDS-8: set mode 1280x800 c > > [ 2.180028] async/0 used greatest stack depth: 6240 bytes left > > [ 2.311701] Console: switching to colour frame buffer device 160x50 > > [ 2.344161] fb0: inteldrmfb frame buffer device > > [ 2.344163] registered panic notifier > > [ 2.381263] acpi device:3b: registered as cooling_device2 > > [ 2.383064] input: Video Bus as > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input3 > > [ 2.383507] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) > > [ 2.383961] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package > > has no elements (empty) (20091112/nspredef-439) > > [ 2.384794] input: Video Bus as > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input4 > > [ 2.385220] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) > > [ 2.385736] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 > > [ 2.386291] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > > [ 2.397666] brd: module loaded > > [ 2.402531] loop: module loaded > > [ 2.403545] Loading iSCSI transport class v2.0-870. > > [ 2.405776] ata_piix 0000:00:1f.2: version 2.13 > > [ 2.405803] ata_piix 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > > [ 2.406147] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] > > [ 2.406810] ata_piix 0000:00:1f.2: setting latency timer to 64 > > [ 2.406998] scsi0 : ata_piix > > [ 2.407806] scsi1 : ata_piix > > [ 2.410373] ata1: SATA max UDMA/133 cmd 0x6e70 ctl 0x6e78 bmdma 0x6ea0 irq 19 > > [ 2.410705] ata2: SATA max UDMA/133 cmd 0x6e80 ctl 0x6e88 bmdma 0x6ea8 irq 19 > > [ 2.411165] ata_piix 0000:00:1f.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > > [ 2.411501] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] > > [ 2.563394] ata_piix 0000:00:1f.5: setting latency timer to 64 > > [ 2.563493] scsi2 : ata_piix > > [ 2.564121] scsi3 : ata_piix > > [ 2.575834] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 19 > > [ 2.586887] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 19 > > [ 2.600548] tg3.c:v3.105 (December 2, 2009) > > [ 2.611593] tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > [ 2.622751] tg3 0000:09:00.0: setting latency timer to 64 > > [ 2.638698] eth0: Tigon3 [partno(BCM95756m) rev a200] (PCI Express) > > MAC address 00:21:9b:f5:60:0f > > [ 2.650064] eth0: attached PHY is 5722/5756 (10/100/1000Base-T > > Ethernet) (WireSpeed[1]) > > [ 2.661533] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] > > [ 2.673063] eth0: dma_rwctrl[76180000] dma_mask[64-bit] > > [ 2.684889] sky2 driver version 1.26 > > [ 2.696408] PPP generic driver version 2.4.2 > > [ 2.708158] PPP Deflate Compression module registered > > [ 2.719445] PPP BSD Compression module registered > > [ 2.731444] PPP MPPE Compression module registered > > [ 2.742638] NET: Registered protocol family 24 > > [ 2.753770] PPPoL2TP kernel driver, V1.0 > > [ 2.764836] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, > > max=256) (6 bit encapsulation enabled). > > [ 2.776283] CSLIP: code copyright 1989 Regents of the University of > > California. > > [ 2.787734] SLIP linefill/keepalive option. > > [ 2.799316] console [netcon0] enabled > > [ 2.810537] netconsole: network logging started > > [ 2.822002] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > > [ 2.833433] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > > [ 2.844842] ehci_hcd 0000:00:1a.7: setting latency timer to 64 > > [ 2.844848] ehci_hcd 0000:00:1a.7: EHCI Host Controller > > [ 2.856214] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned > > bus number 1 > > [ 2.867638] ehci_hcd 0000:00:1a.7: debug port 1 > > [ 2.882679] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported > > [ 2.882717] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 > > [ 2.894255] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > > [ 2.905663] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > > [ 2.906708] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > > [ 2.906949] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > > [ 2.906952] usb usb1: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 > > [ 2.906955] usb usb1: Product: EHCI Host Controller > > [ 2.906958] usb usb1: Manufacturer: Linux 2.6.32-mm1 ehci_hcd > > [ 2.906960] usb usb1: SerialNumber: 0000:00:1a.7 > > [ 2.908100] hub 1-0:1.0: USB hub found > > [ 2.908116] hub 1-0:1.0: 6 ports detected > > [ 2.908556] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > > [ 2.908581] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > > [ 2.908585] ehci_hcd 0000:00:1d.7: EHCI Host Controller > > [ 2.908603] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned > > bus number 2 > > [ 2.908679] ehci_hcd 0000:00:1d.7: debug port 1 > > [ 2.912557] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported > > [ 2.912592] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 > > [ 2.934701] ata3: SATA link down (SStatus 0 SControl 300) > > [ 2.946085] ata4: SATA link down (SStatus 4 SControl 300) > > [ 2.946126] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > > [ 2.946207] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > > [ 2.946210] usb usb2: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 > > [ 2.946212] usb usb2: Product: EHCI Host Controller > > [ 2.946215] usb usb2: Manufacturer: Linux 2.6.32-mm1 ehci_hcd > > [ 2.946217] usb usb2: SerialNumber: 0000:00:1d.7 > > [ 2.946808] hub 2-0:1.0: USB hub found > > [ 2.946831] hub 2-0:1.0: 6 ports detected > > [ 2.947216] uhci_hcd: USB Universal Host Controller Interface driver > > [ 3.159489] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > > [ 3.160208] ata1.00: ATA-8: ST9160310AS, DE04, max UDMA/133 > > [ 3.160212] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32) > > [ 3.189480] uhci_hcd 0000:00:1a.0: setting latency timer to 64 > > [ 3.189485] uhci_hcd 0000:00:1a.0: UHCI Host Controller > > [ 3.191391] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633A, D500, max UDMA/100 > > [ 3.191405] ata2.00: applying bridge limits > > [ 3.219002] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned > > bus number 3 > > [ 3.229172] ata1.00: configured for UDMA/133 > > [ 3.229191] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60 > > [ 3.229343] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > > [ 3.229347] usb usb3: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 > > [ 3.229349] usb usb3: Product: UHCI Host Controller > > [ 3.229351] usb usb3: Manufacturer: Linux 2.6.32-mm1 uhci_hcd > > [ 3.229354] usb usb3: SerialNumber: 0000:00:1a.0 > > [ 3.229946] hub 3-0:1.0: USB hub found > > [ 3.230036] hub 3-0:1.0: 2 ports detected > > [ 3.230281] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > > [ 3.230296] uhci_hcd 0000:00:1a.1: setting latency timer to 64 > > [ 3.230301] uhci_hcd 0000:00:1a.1: UHCI Host Controller > > [ 3.230323] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned > > bus number 4 > > [ 3.230400] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80 > > [ 3.230538] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > > [ 3.230541] usb usb4: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 > > [ 3.230544] usb usb4: Product: UHCI Host Controller > > [ 3.230546] usb usb4: Manufacturer: Linux 2.6.32-mm1 uhci_hcd > > [ 3.230549] usb usb4: SerialNumber: 0000:00:1a.1 > > [ 3.231135] hub 4-0:1.0: USB hub found > > [ 3.231150] hub 4-0:1.0: 2 ports detected > > [ 3.231310] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > > [ 3.231324] uhci_hcd 0000:00:1a.2: setting latency timer to 64 > > [ 3.231329] uhci_hcd 0000:00:1a.2: UHCI Host Controller > > [ 3.231346] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned > > bus number 5 > > [ 3.231393] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0 > > [ 3.231521] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > > [ 3.231524] usb usb5: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 > > [ 3.231526] usb usb5: Product: UHCI Host Controller > > [ 3.231529] usb usb5: Manufacturer: Linux 2.6.32-mm1 uhci_hcd > > [ 3.231531] usb usb5: SerialNumber: 0000:00:1a.2 > > [ 3.232101] hub 5-0:1.0: USB hub found > > [ 3.232121] hub 5-0:1.0: 2 ports detected > > [ 3.232287] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > > [ 3.232302] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > > [ 3.232306] uhci_hcd 0000:00:1d.0: UHCI Host Controller > > [ 3.232323] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned > > bus number 6 > > [ 3.232370] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00 > > [ 3.232504] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > > [ 3.232507] usb usb6: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 > > [ 3.232510] usb usb6: Product: UHCI Host Controller > > [ 3.232512] usb usb6: Manufacturer: Linux 2.6.32-mm1 uhci_hcd > > [ 3.232514] usb usb6: SerialNumber: 0000:00:1d.0 > > [ 3.233084] hub 6-0:1.0: USB hub found > > [ 3.233100] hub 6-0:1.0: 2 ports detected > > [ 3.233273] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > > [ 3.233287] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > > [ 3.233292] uhci_hcd 0000:00:1d.1: UHCI Host Controller > > [ 3.233310] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned > > bus number 7 > > [ 3.233380] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20 > > [ 3.233513] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > > [ 3.233516] usb usb7: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 > > [ 3.233518] usb usb7: Product: UHCI Host Controller > > [ 3.233521] usb usb7: Manufacturer: Linux 2.6.32-mm1 uhci_hcd > > [ 3.233523] usb usb7: SerialNumber: 0000:00:1d.1 > > [ 3.234086] hub 7-0:1.0: USB hub found > > [ 3.234101] hub 7-0:1.0: 2 ports detected > > [ 3.234263] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > > [ 3.234277] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > > [ 3.234282] uhci_hcd 0000:00:1d.2: UHCI Host Controller > > [ 3.234299] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned > > bus number 8 > > [ 3.234347] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 > > [ 3.234480] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 > > [ 3.234483] usb usb8: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 > > [ 3.234486] usb usb8: Product: UHCI Host Controller > > [ 3.234488] usb usb8: Manufacturer: Linux 2.6.32-mm1 uhci_hcd > > [ 3.234490] usb usb8: SerialNumber: 0000:00:1d.2 > > [ 3.235059] hub 8-0:1.0: USB hub found > > [ 3.235082] hub 8-0:1.0: 2 ports detected > > [ 3.235437] Initializing USB Mass Storage driver... > > [ 3.235668] usbcore: registered new interface driver usb-storage > > [ 3.235673] USB Mass Storage support registered. > > [ 3.236109] usbcore: registered new interface driver libusual > > [ 3.236534] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at > > 0x60,0x64 irq 1,12 > > [ 3.237387] i8042.c: Warning: Keylock active. > > [ 3.240564] serio: i8042 KBD port at 0x60,0x64 irq 1 > > [ 3.240605] serio: i8042 AUX port at 0x60,0x64 irq 12 > > [ 3.241694] mice: PS/2 mouse device common for all mice > > [ 3.243828] Driver 'rtc_cmos' needs updating - please use bus_type methods > > [ 3.243873] rtc_cmos 00:03: RTC can wake from S4 > > [ 3.244268] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 > > [ 3.244314] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs > > [ 3.244498] i2c /dev entries driver > > [ 3.246702] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, > > low) -> IRQ 19 > > [ 3.982537] ata2.00: configured for UDMA/100 > > [ 3.983129] scsi 0:0:0:0: Direct-Access ATA ST9160310AS > > DE04 PQ: 0 ANSI: 5 > > [ 3.984407] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04 > > [ 3.985019] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: > > (160 GB/149 GiB) > > [ 3.985213] sd 0:0:0:0: [sda] Write Protect is off > > [ 3.985217] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > [ 3.985296] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > > enabled, doesn't support DPO or FUA > > [ 3.986007] sda: > > [ 3.987294] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 > > [ 3.987559] sd 0:0:0:0: Attached scsi generic sg0 type 0 > > [ 3.988645] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060) > > [ 3.988921] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > > [ 3.988927] iTCO_vendor_support: vendor-support=0 > > [ 4.103269] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) > > initialised: dm-devel@redhat.com > > [ 4.114089] device-mapper: dm-log-userspace: version 1.0.0 loaded > > [ 4.115717] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW > > TS-L633A D500 PQ: 0 ANSI: 5 > > [ 4.136170] input: AT Translated Set 2 keyboard as > > /devices/platform/i8042/serio0/input/input5 > > [ 4.137513] cpuidle: using governor ladder > > [ 4.160918] cpuidle: using governor menu > > [ 4.172702] sdhci: Secure Digital Host Controller Interface driver > > [ 4.183721] sdhci: Copyright(c) Pierre Ossman > > [ 4.187247] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw > > xa/form2 cdda tray > > [ 4.187251] Uniform CD-ROM driver Revision: 3.20 > > [ 4.188050] sr 1:0:0:0: Attached scsi CD-ROM sr0 > > [ 4.188595] sr 1:0:0:0: Attached scsi generic sg1 type 5 > > [ 4.228490] dcdbas dcdbas: Dell Systems Management Base Driver > > (version 5.6.0-3.2) > > [ 4.244671] sda1 sda2 sda3 sda4 < > > [ 4.246859] usbcore: registered new interface driver hiddev > > [ 4.269823] usbcore: registered new interface driver usbhid > > [ 4.281086] usbhid: USB HID core driver > > [ 4.292291] sda5 > > [ 4.292837] Advanced Linux Sound Architecture Driver Version 1.0.21. > > [ 4.314873] ALSA device list: > > [ 4.325942] No soundcards found. > > [ 4.336996] Netfilter messages via NETLINK v0.30. > > [ 4.348290] sda6nf_conntrack version 0.5.0 (15334 buckets, 61336 max) > > [ 4.360287] ctnetlink v0.93: registering with nfnetlink. > > [ 4.374177] ip_tables: (C) 2000-2006 Netfilter Core Team > > [ 4.385662] TCP cubic registered > > [ 4.396917] NET: Registered protocol family 17 > > [ 4.408204] lib80211: common routines for IEEE802.11 drivers > > [ 4.419455] lib80211_crypt: registered algorithm 'NULL' > > [ 4.421640] sda7 > > [ 4.422604] Using IPI No-Shortcut mode > > [ 4.444566] sda8 > > > [ 4.457176] PM: Checking image partition /dev/sda8 > > [ 4.457222] PM: Resume from partition 8:8 > > [ 4.457225] PM: Checking hibernation image. > > [ 4.457992] PM: Error -22 checking image file > > [ 4.457994] PM: Resume from disk failed. > > [ 4.458061] registered taskstats version 1 > > [ 4.460011] sd 0:0:0:0: [sda] Attached SCSI disk > > [ 4.481540] Magic number: 5:855:537 > > [ 4.492483] bdi 1:15: hash matches > > [ 4.503405] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found > > [ 4.650495] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 > > [ 4.692892] input: AlpsPS/2 ALPS GlidePoint as > > /devices/platform/i8042/serio1/input/input7 > > [ 4.720082] md: Waiting for all devices to be available before autodetect > > [ 4.742549] md: If you don't use raid, use raid=noautodetect > > [ 4.767844] md: Autodetecting RAID arrays. > > [ 4.778687] md: Scanned 0 and added 0 devices. > > [ 4.789416] md: autorun ... > > [ 4.800012] md: ... autorun DONE. > > [ 5.003501] Clocksource tsc unstable (delta = -321604132 ns) > > [ 5.079096] kjournald starting. Commit interval 5 seconds > > [ 5.079824] EXT3-fs (sda2): mounted filesystem with writeback data mode > > [ 5.080120] VFS: Mounted root (ext3 filesystem) readonly on device 8:2. > > [ 5.142808] Freeing unused kernel memory: 408k freed > > [ 5.165214] Write protecting the kernel text: 3908k > > [ 5.186530] async/1 used greatest stack depth: 6064 bytes left > > [ 5.196969] Write protecting the kernel read-only data: 2088k > > [ 6.333570] mount used greatest stack depth: 6040 bytes left > > [ 6.951249] udevd used greatest stack depth: 5952 bytes left > > [ 7.234948] modprobe used greatest stack depth: 5828 bytes left > > [ 7.651236] cfg80211: Using static regulatory domain info > > [ 7.661764] cfg80211: Regulatory domain: US > > [ 7.671985] (start_freq - end_freq @ bandwidth), > > (max_antenna_gain, max_eirp) > > [ 7.682267] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) > > [ 7.692698] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > > [ 7.703043] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > > [ 7.713325] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > > [ 7.723694] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > > [ 7.733671] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) > > [ 7.771924] sdhci-pci 0000:02:01.2: SDHCI controller found > > [1180:0822] (rev 21) > > [ 7.781951] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, > > low) -> IRQ 18 > > [ 7.794964] ACPI: WMI: Mapper loaded > > [ 7.879419] Registered led device: mmc0:: > > [ 7.944622] mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA > > [ 7.966785] mmc0: Minimum clock frequency too high for identification mode > > [ 7.997256] ohci1394 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > > [ 8.016459] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, > > low) -> IRQ 21 > > [ 8.036194] cfg80211: Calling CRDA for country: US > > [ 8.069726] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] > > MMIO=[f67ff800-f67fffff] Max Packet=[2048] IR/IT contexts=[4/4] > > [ 8.080275] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X > > [ 8.080357] HDA Intel 0000:00:1b.0: setting latency timer to 64 > > [ 8.512355] input: Dell WMI hotkeys as /devices/virtual/input/input8 > > [ 9.389757] ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc0001679c05c] > > [ 9.532991] b43-phy0: Broadcom 4312 WLAN found (core revision 15) > > [ 9.580380] b43-phy0 debug: Found PHY: Analog 6, Type 5, Revision 1 > > [ 9.580405] b43-phy0 debug: Found Radio: Manuf 0x17F, Version > > 0x2062, Revision 2 > > [ 9.604678] phy0: Selected rate control algorithm 'minstrel' > > [ 9.608519] Registered led device: b43-phy0::tx > > [ 9.630314] Registered led device: b43-phy0::rx > > [ 9.651887] Registered led device: b43-phy0::radio > > [ 9.662725] Broadcom 43xx driver loaded [ Features: PLS, Firmware-ID: FW13 ] > > [ 10.307938] Adding 2008084k swap on /dev/sda8. Priority:-1 > > extents:1 across:2008084k > > [ 12.595365] EXT3-fs (sda2): using internal journal > > [ 17.969618] kjournald starting. Commit interval 5 seconds > > [ 17.991570] EXT3-fs (sda3): using internal journal > > [ 18.013380] EXT3-fs (sda3): mounted filesystem with writeback data mode > > [ 18.237351] modprobe used greatest stack depth: 5816 bytes left > > [ 18.299750] REISERFS (device sda5): found reiserfs format "3.6" > > with standard journal > > [ 18.322229] REISERFS warning (device sda5): reiserfs_fill_super: > > CONFIG_REISERFS_CHECK is set ON > > [ 18.344705] REISERFS warning (device sda5): reiserfs_fill_super: - > > it is slow mode for debugging. > > [ 18.366916] REISERFS (device sda5): using ordered data mode > > [ 18.402628] REISERFS (device sda5): journal params: device sda5, > > size 8192, journal first block 18, max trans len 1024, max batch 900, > > max commit age 30, max trans age 30 > > [ 18.425822] REISERFS (device sda5): checking transaction log (sda5) > > [ 18.437324] REISERFS debug (device sda5): journal-1153: found in > > header: first_unflushed_offset 1203, last_flushed_trans_id 124057 > > [ 18.441500] REISERFS debug (device sda5): journal-1006: found valid > > transaction start offset 4294968499, len 121333 id 4096 > > [ 18.441510] REISERFS debug (device sda5): journal-1206: Starting > > replay from offset 532825052808371, trans_id 2823643143 > > [ 18.441519] REISERFS debug (device sda5): journal-1037: > > journal_read_transaction, offset 4294968499, len 359 mount_id > > -1471324153 > > [ 18.441527] REISERFS debug (device sda5): journal-1039: > > journal_read_trans skipping because 1203 is too old > > [ 18.441534] REISERFS debug (device sda5): journal-1299: Setting > > newest_mount_id to 457 > > [ 18.465006] REISERFS (device sda5): Using r5 hash to sort names > > [ 18.517772] mount used greatest stack depth: 5740 bytes left > > [ 19.151072] rc.S used greatest stack depth: 5424 bytes left > > [ 27.284345] smbd used greatest stack depth: 5296 bytes left > > [ 224.256014] PM: Syncing filesystems ... done. > > [ 224.295550] PM: Preparing system for mem sleep > > [ 224.295734] Freezing user space processes ... (elapsed 0.01 seconds) done. > > [ 224.306948] Freezing remaining freezable tasks ... (elapsed 0.01 > > seconds) done. > > [ 224.320225] PM: Entering mem sleep > > [ 224.320350] Suspending console(s) (use no_console_suspend to debug) > > [ 224.335095] sd 0:0:0:0: [sda] Synchronizing SCSI cache > > [ 224.538141] sd 0:0:0:0: [sda] Stopping disk > > [ 225.379324] ACPI handle has no context! > > [ 225.379364] sdhci-pci 0000:02:01.2: PCI INT C disabled > > [ 225.379374] ACPI handle has no context! > > [ 225.395501] ACPI handle has no context! > > [ 225.407487] b43-pci-bridge 0000:0c:00.0: PCI INT A disabled > > [ 225.420718] ata_piix 0000:00:1f.5: PCI INT D disabled > > [ 225.433838] ata_piix 0000:00:1f.2: PCI INT D disabled > > [ 225.446992] ehci_hcd 0000:00:1d.7: PCI INT A disabled > > [ 225.447061] uhci_hcd 0000:00:1d.2: PCI INT C disabled > > [ 225.447076] uhci_hcd 0000:00:1d.1: PCI INT B disabled > > [ 225.447090] uhci_hcd 0000:00:1d.0: PCI INT A disabled > > [ 225.653729] HDA Intel 0000:00:1b.0: PCI INT A disabled > > [ 225.666930] ehci_hcd 0000:00:1a.7: PCI INT C disabled > > [ 225.666952] uhci_hcd 0000:00:1a.2: PCI INT C disabled > > [ 225.666974] uhci_hcd 0000:00:1a.1: PCI INT B disabled > > [ 225.667001] uhci_hcd 0000:00:1a.0: PCI INT A disabled > > [ 225.680708] render error detected, EIR: 0x00000010 > > [ 225.680711] IPEIR: 0x00000000 > > [ 225.680714] IPEHR: 0x01000000 > > [ 225.680716] INSTDONE: 0xfffffffe > > [ 225.680718] INSTPS: 0x0001e000 > > [ 225.680720] INSTDONE1: 0xffffffff > > [ 225.680722] ACTHD: 0x02000018 > > [ 225.680725] page table error > > [ 225.680727] PGTBL_ER: 0x00100000 > > [ 225.680731] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking > > [ 225.731462] ACPI: Preparing to enter system sleep state S3 > > [ 225.754167] Disabling non-boot CPUs ... > > [ 225.809478] CPU 1 is now offline > > [ 225.809481] lockdep: fixing up alternatives. > > [ 225.809487] SMP alternatives: switching to UP code > > [ 225.816500] Extended CMOS year: 2000 > > [ 225.816500] Back to C! > > [ 225.816500] Extended CMOS year: 2000 > > [ 225.816720] Enabling non-boot CPUs ... > > [ 225.818422] lockdep: fixing up alternatives. > > [ 225.818425] SMP alternatives: switching to SMP code > > [ 225.822188] Booting processor 1 APIC 0x1 ip 0x6000 > > [ 225.818021] Initializing CPU#1 > > [ 225.818021] CPU: Physical Processor ID: 0 > > [ 225.818021] CPU: Processor Core ID: 1 > > [ 225.913392] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > > [ 225.937046] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 > > [ 225.937053] platform microcode: firmware: requesting intel-ucode/06-0f-0d > > [ 225.937179] firmware microcode: parent microcode should not be sleeping > > [ 285.940840] CPU1 is up > > [ 285.941309] ACPI: Waking up from system sleep state S3 > > [ 285.991446] i915 0000:00:02.0: restoring config space at offset 0xf > > (was 0x100, writing 0x10b) > > [ 285.991465] i915 0000:00:02.0: restoring config space at offset 0x8 > > (was 0x1, writing 0xefe9) > > [ 285.991474] i915 0000:00:02.0: restoring config space at offset 0x6 > > (was 0xc, writing 0xe000000c) > > [ 285.991488] i915 0000:00:02.0: restoring config space at offset 0x1 > > (was 0x900007, writing 0x900407) > > [ 285.991554] pci 0000:00:02.1: restoring config space at offset 0x4 > > (was 0x4, writing 0xf6b00004) > > [ 285.991564] pci 0000:00:02.1: restoring config space at offset 0x1 > > (was 0x900000, writing 0x900007) > > [ 285.991594] uhci_hcd 0000:00:1a.0: restoring config space at offset > > 0xf (was 0x100, writing 0x10a) > > [ 285.991618] uhci_hcd 0000:00:1a.0: restoring config space at offset > > 0x8 (was 0x1, writing 0x6f61) > > [ 285.991643] uhci_hcd 0000:00:1a.0: restoring config space at offset > > 0x1 (was 0x2900000, writing 0x2900001) > > [ 285.991678] uhci_hcd 0000:00:1a.1: restoring config space at offset > > 0xf (was 0x200, writing 0x207) > > [ 285.991703] uhci_hcd 0000:00:1a.1: restoring config space at offset > > 0x8 (was 0x1, writing 0x6f81) > > [ 285.991727] uhci_hcd 0000:00:1a.1: restoring config space at offset > > 0x1 (was 0x2900000, writing 0x2900001) > > [ 285.991762] uhci_hcd 0000:00:1a.2: restoring config space at offset > > 0xf (was 0x300, writing 0x305) > > [ 285.991786] uhci_hcd 0000:00:1a.2: restoring config space at offset > > 0x8 (was 0x1, writing 0x6fa1) > > [ 285.991811] uhci_hcd 0000:00:1a.2: restoring config space at offset > > 0x1 (was 0x2900000, writing 0x2900001) > > [ 285.991895] ehci_hcd 0000:00:1a.7: restoring config space at offset > > 0x1 (was 0x2900106, writing 0x2900102) > > [ 285.991956] HDA Intel 0000:00:1b.0: restoring config space at > > offset 0xf (was 0x100, writing 0x107) > > [ 285.991991] HDA Intel 0000:00:1b.0: restoring config space at > > offset 0x4 (was 0xfebfc004, writing 0xf6afc004) > > [ 285.992000] HDA Intel 0000:00:1b.0: restoring config space at > > offset 0x3 (was 0x0, writing 0x10) > > [ 285.992011] HDA Intel 0000:00:1b.0: restoring config space at > > offset 0x1 (was 0x100000, writing 0x100102) > > [ 285.992068] pcieport 0000:00:1c.0: restoring config space at offset > > 0xf (was 0x100, writing 0x20100) > > [ 285.992090] pcieport 0000:00:1c.0: restoring config space at offset > > 0x9 (was 0x10001, writing 0x44314421) > > [ 285.992098] pcieport 0000:00:1c.0: restoring config space at offset > > 0x8 (was 0x0, writing 0x44104400) > > [ 285.992107] pcieport 0000:00:1c.0: restoring config space at offset > > 0x7 (was 0x20000000, writing 0x2020) > > [ 285.992115] pcieport 0000:00:1c.0: restoring config space at offset > > 0x6 (was 0x0, writing 0xb0b00) > > [ 285.992129] pcieport 0000:00:1c.0: restoring config space at offset > > 0x3 (was 0x810000, writing 0x810010) > > [ 285.992140] pcieport 0000:00:1c.0: restoring config space at offset > > 0x1 (was 0x100000, writing 0x100507) > > [ 285.992227] pcieport 0000:00:1c.1: restoring config space at offset > > 0xf (was 0x200, writing 0x20200) > > [ 285.992249] pcieport 0000:00:1c.1: restoring config space at offset > > 0x9 (was 0x10001, writing 0x44514441) > > [ 285.992257] pcieport 0000:00:1c.1: restoring config space at offset > > 0x8 (was 0x0, writing 0xf690f690) > > [ 285.992266] pcieport 0000:00:1c.1: restoring config space at offset > > 0x7 (was 0x20000000, writing 0x3030) > > [ 285.992275] pcieport 0000:00:1c.1: restoring config space at offset > > 0x6 (was 0x0, writing 0xc0c00) > > [ 285.992289] pcieport 0000:00:1c.1: restoring config space at offset > > 0x3 (was 0x810000, writing 0x810010) > > [ 285.992300] pcieport 0000:00:1c.1: restoring config space at offset > > 0x1 (was 0x100000, writing 0x100507) > > [ 285.992386] pcieport 0000:00:1c.4: restoring config space at offset > > 0xf (was 0x100, writing 0x20100) > > [ 285.992408] pcieport 0000:00:1c.4: restoring config space at offset > > 0x9 (was 0x10001, writing 0x44714461) > > [ 285.992417] pcieport 0000:00:1c.4: restoring config space at offset > > 0x8 (was 0x0, writing 0xf680f680) > > [ 285.992425] pcieport 0000:00:1c.4: restoring config space at offset > > 0x7 (was 0x20000000, writing 0x4040) > > [ 285.992434] pcieport 0000:00:1c.4: restoring config space at offset > > 0x6 (was 0x0, writing 0x90900) > > [ 285.992448] pcieport 0000:00:1c.4: restoring config space at offset > > 0x3 (was 0x810000, writing 0x810010) > > [ 285.992459] pcieport 0000:00:1c.4: restoring config space at offset > > 0x1 (was 0x100000, writing 0x100407) > > [ 285.992571] uhci_hcd 0000:00:1d.0: restoring config space at offset > > 0x1 (was 0x2900005, writing 0x2900001) > > [ 285.992606] uhci_hcd 0000:00:1d.1: restoring config space at offset > > 0xf (was 0x200, writing 0x207) > > [ 285.992630] uhci_hcd 0000:00:1d.1: restoring config space at offset > > 0x8 (was 0x1, writing 0x6f21) > > [ 285.992655] uhci_hcd 0000:00:1d.1: restoring config space at offset > > 0x1 (was 0x2900000, writing 0x2900001) > > [ 285.992689] uhci_hcd 0000:00:1d.2: restoring config space at offset > > 0xf (was 0x300, writing 0x305) > > [ 285.992714] uhci_hcd 0000:00:1d.2: restoring config space at offset > > 0x8 (was 0x1, writing 0x6f41) > > [ 285.992738] uhci_hcd 0000:00:1d.2: restoring config space at offset > > 0x1 (was 0x2900000, writing 0x2900001) > > [ 285.992823] ehci_hcd 0000:00:1d.7: restoring config space at offset > > 0x1 (was 0x2900106, writing 0x2900102) > > [ 285.992883] pci 0000:00:1e.0: restoring config space at offset 0x9 > > (was 0x1fff1, writing 0x43f14001) > > [ 285.992895] pci 0000:00:1e.0: restoring config space at offset 0x7 > > (was 0x2280e0f0, writing 0x22805050) > > [ 285.992903] pci 0000:00:1e.0: restoring config space at offset 0x6 > > (was 0x20020200, writing 0x20030200) > > [ 285.992997] pci 0000:00:1f.0: restoring config space at offset 0x1 > > (was 0x2100007, writing 0x2100107) > > [ 285.993041] ata_piix 0000:00:1f.2: restoring config space at offset > > 0xf (was 0x400, writing 0x40a) > > [ 285.993109] i801_smbus 0000:00:1f.3: restoring config space at > > offset 0xf (was 0x200, writing 0x204) > > [ 285.993144] i801_smbus 0000:00:1f.3: restoring config space at > > offset 0x4 (was 0x4, writing 0xf6afbf04) > > [ 285.993159] i801_smbus 0000:00:1f.3: restoring config space at > > offset 0x1 (was 0x2800001, writing 0x2800103) > > [ 285.993192] ata_piix 0000:00:1f.5: restoring config space at offset > > 0xf (was 0x400, writing 0x40a) > > [ 285.993214] ata_piix 0000:00:1f.5: restoring config space at offset > > 0x9 (was 0x1, writing 0xeff1) > > [ 285.993241] ata_piix 0000:00:1f.5: restoring config space at offset > > 0x1 (was 0x2b00000, writing 0x2b00007) > > [ 285.993557] b43-pci-bridge 0000:0c:00.0: restoring config space at > > offset 0xf (was 0x100, writing 0x104) > > [ 285.993632] b43-pci-bridge 0000:0c:00.0: restoring config space at > > offset 0x4 (was 0x4, writing 0xf69fc004) > > [ 285.993648] b43-pci-bridge 0000:0c:00.0: restoring config space at > > offset 0x3 (was 0x0, writing 0x10) > > [ 285.993669] b43-pci-bridge 0000:0c:00.0: restoring config space at > > offset 0x1 (was 0x100000, writing 0x100106) > > [ 285.993877] tg3 0000:09:00.0: restoring config space at offset 0x3 > > (was 0x0, writing 0x10) > > [ 285.993890] tg3 0000:09:00.0: restoring config space at offset 0x1 > > (was 0x100000, writing 0x100106) > > [ 285.993958] pci 0000:02:01.0: restoring config space at offset 0xf > > (was 0x7000100, writing 0x700010a) > > [ 285.993966] pci 0000:02:01.0: restoring config space at offset 0xe > > (was 0x0, writing 0x51fc) > > [ 285.993975] pci 0000:02:01.0: restoring config space at offset 0xd > > (was 0x0, writing 0x5100) > > [ 285.993983] pci 0000:02:01.0: restoring config space at offset 0xc > > (was 0x0, writing 0x50fc) > > [ 285.993992] pci 0000:02:01.0: restoring config space at offset 0xb > > (was 0x0, writing 0x5000) > > [ 285.994000] pci 0000:02:01.0: restoring config space at offset 0xa > > (was 0x0, writing 0x4bfff000) > > [ 285.994009] pci 0000:02:01.0: restoring config space at offset 0x9 > > (was 0x0, writing 0x48000000) > > [ 285.994017] pci 0000:02:01.0: restoring config space at offset 0x8 > > (was 0x0, writing 0x43fff000) > > [ 285.994026] pci 0000:02:01.0: restoring config space at offset 0x7 > > (was 0x0, writing 0x40000000) > > [ 285.994035] pci 0000:02:01.0: restoring config space at offset 0x6 > > (was 0x0, writing 0xb0060302) > > [ 285.994046] pci 0000:02:01.0: restoring config space at offset 0x4 > > (was 0x0, writing 0xf6700000) > > [ 285.994054] pci 0000:02:01.0: restoring config space at offset 0x3 > > (was 0x820000, writing 0x824000) > > [ 285.994066] pci 0000:02:01.0: restoring config space at offset 0x1 > > (was 0x2100000, writing 0x2100107) > > [ 285.994106] ohci1394 0000:02:01.1: restoring config space at offset > > 0xf (was 0x4020200, writing 0x4020204) > > [ 285.994146] ohci1394 0000:02:01.1: restoring config space at offset > > 0x3 (was 0x800000, writing 0x804010) > > [ 285.994159] ohci1394 0000:02:01.1: restoring config space at offset > > 0x1 (was 0x2100000, writing 0x2100106) > > [ 285.994197] sdhci-pci 0000:02:01.2: restoring config space at > > offset 0xf (was 0x300, writing 0x303) > > [ 285.994232] sdhci-pci 0000:02:01.2: restoring config space at > > offset 0x4 (was 0x0, writing 0xf67ff700) > > [ 285.994241] sdhci-pci 0000:02:01.2: restoring config space at > > offset 0x3 (was 0x800000, writing 0x804010) > > [ 285.994253] sdhci-pci 0000:02:01.2: restoring config space at > > offset 0x1 (was 0x2100000, writing 0x2100106) > > [ 286.009482] PM: Device PNP0C0D:00 failed to resume: error 1 > > [ 286.039022] dell-wmi: Unknown key e044 pressed > > [ 286.151069] i915 0000:00:02.0: setting latency timer to 64 > > [ 286.243570] [drm] LVDS-8: set mode 1280x800 c > > [ 286.290393] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > > [ 286.290404] uhci_hcd 0000:00:1a.0: setting latency timer to 64 > > [ 286.290441] usb usb3: root hub lost power or was reset > > [ 286.290466] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > > [ 286.290475] uhci_hcd 0000:00:1a.1: setting latency timer to 64 > > [ 286.290505] usb usb4: root hub lost power or was reset > > [ 286.290527] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > > [ 286.290537] uhci_hcd 0000:00:1a.2: setting latency timer to 64 > > [ 286.290565] usb usb5: root hub lost power or was reset > > [ 286.290588] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > > [ 286.290598] ehci_hcd 0000:00:1a.7: setting latency timer to 64 > > [ 286.290613] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, > > low) -> IRQ 21 > > [ 286.290623] HDA Intel 0000:00:1b.0: setting latency timer to 64 > > [ 286.290689] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X > > [ 286.290764] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > > [ 286.290773] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > > [ 286.290801] usb usb6: root hub lost power or was reset > > [ 286.290846] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > > [ 286.290856] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > > [ 286.290887] usb usb7: root hub lost power or was reset > > [ 286.290911] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 > > [ 286.290921] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > > [ 286.290950] usb usb8: root hub lost power or was reset > > [ 286.290972] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > > [ 286.290982] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > > [ 286.291001] pci 0000:00:1e.0: setting latency timer to 64 > > [ 286.291018] ata_piix 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > > [ 286.291025] ata_piix 0000:00:1f.2: setting latency timer to 64 > > [ 286.291110] ata_piix 0000:00:1f.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > > [ 286.291119] ata_piix 0000:00:1f.5: setting latency timer to 64 > > [ 286.291394] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 > > (level, low) -> IRQ 17 > > [ 286.307121] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > > [ 286.362261] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] > > MMIO=[f67ff800-f67fffff] Max Packet=[2048] IR/IT contexts=[4/4] > > [ 286.368333] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, > > low) -> IRQ 18 > > [ 286.383529] mmc0: Minimum clock frequency too high for identification mode > > [ 286.423034] sd 0:0:0:0: [sda] Starting disk > > [ 286.621595] ata3: SATA link down (SStatus 0 SControl 300) > > [ 286.632845] ata4: SATA link down (SStatus 4 SControl 300) > > [ 286.763599] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > > [ 286.763812] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > > [ 286.823841] ata2.00: configured for UDMA/100 > > [ 287.027642] ata1.00: configured for UDMA/133 > > [ 287.095609] PM: Finishing wakeup. > > [ 287.095611] Restarting tasks ... done. > > [ 457.056279] dell-wmi: Unknown key 48 pressed > > [ 457.249535] dell-wmi: Unknown key 48 pressed > > [ 457.423506] dell-wmi: Unknown key 48 pressed > > [ 457.608626] dell-wmi: Unknown key 48 pressed > > [ 457.788025] dell-wmi: Unknown key 48 pressed > > [ 457.947402] dell-wmi: Unknown key 48 pressed > > [ 460.438540] dell-wmi: Unknown key 48 pressed > > [ 475.910065] dell-wmi: Unknown key 48 pressed > > [ 476.103445] dell-wmi: Unknown key 48 pressed > > [ 477.844084] dell-wmi: Unknown key 48 pressed > > [ 478.093328] dell-wmi: Unknown key 48 pressed > > [ 478.950676] dell-wmi: Unknown key 48 pressed > > [ 479.229816] dell-wmi: Unknown key 48 pressed > > [ 479.459126] dell-wmi: Unknown key 48 pressed > > [ 479.658534] dell-wmi: Unknown key 48 pressed > > [ 480.525933] dell-wmi: Unknown key 48 pressed > > [ 480.748745] dell-wmi: Unknown key 48 pressed > > [ 480.944699] dell-wmi: Unknown key 48 pressed > > [ 549.103799] b43 ssb0:0: firmware: requesting b43/ucode15.fw > > [ 549.215863] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw > > [ 549.244516] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw > > [ 549.403735] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) > > [ 549.406244] b43-phy0 debug: b2062: Using crystal tab entry 19200 kHz. > > [ 553.990808] b43-phy0 debug: Chip initialized > > [ 553.991181] b43-phy0 debug: PIO initialized > > [ 553.991297] b43-phy0 debug: QoS enabled > > [ 554.010624] b43-phy0 debug: Wireless interface started > > [ 554.018136] b43-phy0 debug: Adding Interface type 2 > > [ 555.225635] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) > > [ 555.227406] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) > > [ 555.247446] wlan0: direct probe responded > > [ 555.247504] wlan0: authenticate with AP 00:02:2d:08:51:2b (try 1) > > [ 555.275021] wlan0: authenticated > > [ 555.275905] wlan0: associate with AP 00:02:2d:08:51:2b (try 1) > > [ 555.284599] wlan0: RX AssocResp from 00:02:2d:08:51:2b (capab=0x1 > > status=0 aid=12) > > [ 555.284608] wlan0: associated > > [ 561.323866] mtrr: type mismatch for e0000000,10000000 old: > > write-back new: write-combining > > [ 2688.500033] No probe response from AP 00:02:2d:08:51:2b after > > 500ms, disconnecting. > > [ 2689.580376] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) > > [ 2689.780643] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 2) > > [ 2689.798772] wlan0: direct probe responded > > [ 2689.798778] wlan0: authenticate with AP 00:02:2d:08:51:2b (try 1) > > [ 2689.986996] wlan0: authenticated > > [ 2689.987691] wlan0: associate with AP 00:02:2d:08:51:2b (try 1) > > [ 2690.006697] wlan0: RX ReassocResp from 00:02:2d:08:51:2b (capab=0x1 > > status=0 aid=1) > > [ 2690.006706] wlan0: associated > > > > -- > > Regards > > dave > > > > > > -- > Regards > dave > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly 2009-12-10 9:52 ` KOSAKI Motohiro @ 2009-12-10 22:11 ` Nigel Cunningham 2009-12-11 1:47 ` Dave Young 2009-12-10 22:29 ` David Miller 1 sibling, 1 reply; 16+ messages in thread From: Nigel Cunningham @ 2009-12-10 22:11 UTC (permalink / raw) To: KOSAKI Motohiro Cc: Dave Young, Andrew Morton, Linux Kernel Mailing List, netdev Dave, could you be more specific? Is the delay Ksaki has picked out related to your report... KOSAKI Motohiro wrote: > (cc to netdev) > > Hi net-folks > >>> [ 561.323866] mtrr: type mismatch for e0000000,10000000 old: >>> write-back new: write-combining >>> [ 2688.500033] No probe response from AP 00:02:2d:08:51:2b after >>> 500ms, disconnecting. >>> [ 2689.580376] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) > > What's mean "No probe response"? Why its point waste 2000sec? [...] >>> [ 225.731462] ACPI: Preparing to enter system sleep state S3 >>> [ 225.754167] Disabling non-boot CPUs ... >>> [ 225.809478] CPU 1 is now offline >>> [ 225.809481] lockdep: fixing up alternatives. >>> [ 225.809487] SMP alternatives: switching to UP code >>> [ 225.816500] Extended CMOS year: 2000 >>> [ 225.816500] Back to C! >>> [ 225.816500] Extended CMOS year: 2000 >>> [ 225.816720] Enabling non-boot CPUs ... >>> [ 225.818422] lockdep: fixing up alternatives. >>> [ 225.818425] SMP alternatives: switching to SMP code >>> [ 225.822188] Booting processor 1 APIC 0x1 ip 0x6000 >>> [ 225.818021] Initializing CPU#1 >>> [ 225.818021] CPU: Physical Processor ID: 0 >>> [ 225.818021] CPU: Processor Core ID: 1 >>> [ 225.913392] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d >>> [ 225.937046] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 >>> [ 225.937053] platform microcode: firmware: requesting intel-ucode/06-0f-0d >>> [ 225.937179] firmware microcode: parent microcode should not be sleeping >>> [ 285.940840] CPU1 is up ... or the 60 second delay before the CPU1 is up message? Regards, Nigel ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly @ 2009-12-11 1:47 ` Dave Young 0 siblings, 0 replies; 16+ messages in thread From: Dave Young @ 2009-12-11 1:47 UTC (permalink / raw) To: Nigel Cunningham Cc: KOSAKI Motohiro, Andrew Morton, Linux Kernel Mailing List, netdev, linux-wireless, David S. Miller On Fri, Dec 11, 2009 at 6:11 AM, Nigel Cunningham <ncunningham@crca.org.au> wrote: > Dave, could you be more specific? > > Is the delay Ksaki has picked out related to your report... I can not reproduce the wireless delay today, maybe related to wireless environment? > > KOSAKI Motohiro wrote: >> (cc to netdev) >> >> Hi net-folks >> >>>> [ 561.323866] mtrr: type mismatch for e0000000,10000000 old: >>>> write-back new: write-combining >>>> [ 2688.500033] No probe response from AP 00:02:2d:08:51:2b after >>>> 500ms, disconnecting. >>>> [ 2689.580376] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) >> >> What's mean "No probe response"? Why its point waste 2000sec? > > [...] > >>>> [ 225.731462] ACPI: Preparing to enter system sleep state S3 >>>> [ 225.754167] Disabling non-boot CPUs ... >>>> [ 225.809478] CPU 1 is now offline >>>> [ 225.809481] lockdep: fixing up alternatives. >>>> [ 225.809487] SMP alternatives: switching to UP code >>>> [ 225.816500] Extended CMOS year: 2000 >>>> [ 225.816500] Back to C! >>>> [ 225.816500] Extended CMOS year: 2000 >>>> [ 225.816720] Enabling non-boot CPUs ... >>>> [ 225.818422] lockdep: fixing up alternatives. >>>> [ 225.818425] SMP alternatives: switching to SMP code >>>> [ 225.822188] Booting processor 1 APIC 0x1 ip 0x6000 >>>> [ 225.818021] Initializing CPU#1 >>>> [ 225.818021] CPU: Physical Processor ID: 0 >>>> [ 225.818021] CPU: Processor Core ID: 1 >>>> [ 225.913392] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d >>>> [ 225.937046] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 >>>> [ 225.937053] platform microcode: firmware: requesting intel-ucode/06-0f-0d >>>> [ 225.937179] firmware microcode: parent microcode should not be sleeping >>>> [ 285.940840] CPU1 is up > > ... or the 60 second delay before the CPU1 is up message? Yes, this delay occurs every time > > Regards, > > Nigel > -- Regards dave ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly @ 2009-12-11 1:47 ` Dave Young 0 siblings, 0 replies; 16+ messages in thread From: Dave Young @ 2009-12-11 1:47 UTC (permalink / raw) To: Nigel Cunningham Cc: KOSAKI Motohiro, Andrew Morton, Linux Kernel Mailing List, netdev, linux-wireless, David S. Miller On Fri, Dec 11, 2009 at 6:11 AM, Nigel Cunningham <ncunningham-VWkGxi2CTS+6c6uEtOJ/EA@public.gmane.org> wrote: > Dave, could you be more specific? > > Is the delay Ksaki has picked out related to your report... I can not reproduce the wireless delay today, maybe related to wireless environment? > > KOSAKI Motohiro wrote: >> (cc to netdev) >> >> Hi net-folks >> >>>> [ 561.323866] mtrr: type mismatch for e0000000,10000000 old: >>>> write-back new: write-combining >>>> [ 2688.500033] No probe response from AP 00:02:2d:08:51:2b after >>>> 500ms, disconnecting. >>>> [ 2689.580376] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) >> >> What's mean "No probe response"? Why its point waste 2000sec? > > [...] > >>>> [ 225.731462] ACPI: Preparing to enter system sleep state S3 >>>> [ 225.754167] Disabling non-boot CPUs ... >>>> [ 225.809478] CPU 1 is now offline >>>> [ 225.809481] lockdep: fixing up alternatives. >>>> [ 225.809487] SMP alternatives: switching to UP code >>>> [ 225.816500] Extended CMOS year: 2000 >>>> [ 225.816500] Back to C! >>>> [ 225.816500] Extended CMOS year: 2000 >>>> [ 225.816720] Enabling non-boot CPUs ... >>>> [ 225.818422] lockdep: fixing up alternatives. >>>> [ 225.818425] SMP alternatives: switching to SMP code >>>> [ 225.822188] Booting processor 1 APIC 0x1 ip 0x6000 >>>> [ 225.818021] Initializing CPU#1 >>>> [ 225.818021] CPU: Physical Processor ID: 0 >>>> [ 225.818021] CPU: Processor Core ID: 1 >>>> [ 225.913392] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d >>>> [ 225.937046] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 >>>> [ 225.937053] platform microcode: firmware: requesting intel-ucode/06-0f-0d >>>> [ 225.937179] firmware microcode: parent microcode should not be sleeping >>>> [ 285.940840] CPU1 is up > > ... or the 60 second delay before the CPU1 is up message? Yes, this delay occurs every time > > Regards, > > Nigel > -- Regards dave -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly 2009-12-11 1:47 ` Dave Young (?) @ 2009-12-11 2:37 ` Zhu Yi 2009-12-11 3:35 ` Dave Young -1 siblings, 1 reply; 16+ messages in thread From: Zhu Yi @ 2009-12-11 2:37 UTC (permalink / raw) To: Dave Young Cc: Nigel Cunningham, KOSAKI Motohiro, Andrew Morton, Linux Kernel Mailing List, netdev, linux-wireless, David S. Miller On Fri, 2009-12-11 at 09:47 +0800, Dave Young wrote: > I can not reproduce the wireless delay today, maybe related to > wireless environment? Try powering off the AP before resume? Thanks, -yi ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly 2009-12-11 2:37 ` Zhu Yi @ 2009-12-11 3:35 ` Dave Young 2009-12-11 8:10 ` Zhu Yi 0 siblings, 1 reply; 16+ messages in thread From: Dave Young @ 2009-12-11 3:35 UTC (permalink / raw) To: Zhu Yi Cc: Nigel Cunningham, KOSAKI Motohiro, Andrew Morton, Linux Kernel Mailing List, netdev, linux-wireless, David S. Miller On Fri, Dec 11, 2009 at 10:37 AM, Zhu Yi <yi.zhu@intel.com> wrote: > On Fri, 2009-12-11 at 09:47 +0800, Dave Young wrote: >> I can not reproduce the wireless delay today, maybe related to >> wireless environment? > > Try powering off the AP before resume? Unfortunately, I use public wireless resouce, so I cann't do that. > > Thanks, > -yi > > -- Regards dave ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly @ 2009-12-11 8:10 ` Zhu Yi 0 siblings, 0 replies; 16+ messages in thread From: Zhu Yi @ 2009-12-11 8:10 UTC (permalink / raw) To: Dave Young Cc: Nigel Cunningham, KOSAKI Motohiro, Andrew Morton, Linux Kernel Mailing List, netdev, linux-wireless, David S. Miller On Fri, 2009-12-11 at 11:35 +0800, Dave Young wrote: > > Try powering off the AP before resume? > > Unfortunately, I use public wireless resouce, so I cann't do that. Then move the laptop away. Thanks, -yi ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly @ 2009-12-11 8:10 ` Zhu Yi 0 siblings, 0 replies; 16+ messages in thread From: Zhu Yi @ 2009-12-11 8:10 UTC (permalink / raw) To: Dave Young Cc: Nigel Cunningham, KOSAKI Motohiro, Andrew Morton, Linux Kernel Mailing List, netdev, linux-wireless, David S. Miller On Fri, 2009-12-11 at 11:35 +0800, Dave Young wrote: > > Try powering off the AP before resume? > > Unfortunately, I use public wireless resouce, so I cann't do that. Then move the laptop away. Thanks, -yi -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly 2009-12-11 8:10 ` Zhu Yi @ 2009-12-11 8:59 ` Dave Young -1 siblings, 0 replies; 16+ messages in thread From: Dave Young @ 2009-12-11 8:59 UTC (permalink / raw) To: Zhu Yi Cc: Nigel Cunningham, KOSAKI Motohiro, Andrew Morton, Linux Kernel Mailing List, netdev, linux-wireless, David S. Miller On Fri, Dec 11, 2009 at 4:10 PM, Zhu Yi <yi.zhu@intel.com> wrote: > On Fri, 2009-12-11 at 11:35 +0800, Dave Young wrote: >> > Try powering off the AP before resume? >> >> Unfortunately, I use public wireless resouce, so I cann't do that. > > Then move the laptop away. Tried, still can not produce. > > Thanks, > -yi > > -- Regards dave ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly @ 2009-12-11 8:59 ` Dave Young 0 siblings, 0 replies; 16+ messages in thread From: Dave Young @ 2009-12-11 8:59 UTC (permalink / raw) To: Zhu Yi Cc: Nigel Cunningham, KOSAKI Motohiro, Andrew Morton, Linux Kernel Mailing List, netdev, linux-wireless, David S. Miller On Fri, Dec 11, 2009 at 4:10 PM, Zhu Yi <yi.zhu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> wrote: > On Fri, 2009-12-11 at 11:35 +0800, Dave Young wrote: >> > Try powering off the AP before resume? >> >> Unfortunately, I use public wireless resouce, so I cann't do that. > > Then move the laptop away. Tried, still can not produce. > > Thanks, > -yi > > -- Regards dave -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly @ 2009-12-11 9:10 ` Dave Young 0 siblings, 0 replies; 16+ messages in thread From: Dave Young @ 2009-12-11 9:10 UTC (permalink / raw) To: Nigel Cunningham Cc: KOSAKI Motohiro, Andrew Morton, Linux Kernel Mailing List, netdev, linux-wireless, David S. Miller, Zhu Yi On Fri, Dec 11, 2009 at 9:47 AM, Dave Young <hidave.darkstar@gmail.com> wrote: > On Fri, Dec 11, 2009 at 6:11 AM, Nigel Cunningham > <ncunningham@crca.org.au> wrote: >> Dave, could you be more specific? >> >> Is the delay Ksaki has picked out related to your report... > > I can not reproduce the wireless delay today, maybe related to > wireless environment? > >> >> KOSAKI Motohiro wrote: >>> (cc to netdev) >>> >>> Hi net-folks >>> >>>>> [ 561.323866] mtrr: type mismatch for e0000000,10000000 old: >>>>> write-back new: write-combining >>>>> [ 2688.500033] No probe response from AP 00:02:2d:08:51:2b after >>>>> 500ms, disconnecting. >>>>> [ 2689.580376] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) >>> >>> What's mean "No probe response"? Why its point waste 2000sec? Rereading the dmesg I post, I think maybe this delay is not relevant because it is after "PM: Finishing wakeup." The brightness is so low after resume finished that I thought it as resume delay. >> >> [...] >> >>>>> [ 225.731462] ACPI: Preparing to enter system sleep state S3 >>>>> [ 225.754167] Disabling non-boot CPUs ... >>>>> [ 225.809478] CPU 1 is now offline >>>>> [ 225.809481] lockdep: fixing up alternatives. >>>>> [ 225.809487] SMP alternatives: switching to UP code >>>>> [ 225.816500] Extended CMOS year: 2000 >>>>> [ 225.816500] Back to C! >>>>> [ 225.816500] Extended CMOS year: 2000 >>>>> [ 225.816720] Enabling non-boot CPUs ... >>>>> [ 225.818422] lockdep: fixing up alternatives. >>>>> [ 225.818425] SMP alternatives: switching to SMP code >>>>> [ 225.822188] Booting processor 1 APIC 0x1 ip 0x6000 >>>>> [ 225.818021] Initializing CPU#1 >>>>> [ 225.818021] CPU: Physical Processor ID: 0 >>>>> [ 225.818021] CPU: Processor Core ID: 1 >>>>> [ 225.913392] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d >>>>> [ 225.937046] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 >>>>> [ 225.937053] platform microcode: firmware: requesting intel-ucode/06-0f-0d >>>>> [ 225.937179] firmware microcode: parent microcode should not be sleeping >>>>> [ 285.940840] CPU1 is up >> >> ... or the 60 second delay before the CPU1 is up message? > > Yes, this delay occurs every time Then what caused this one, any idea? > >> >> Regards, >> >> Nigel >> > > > > -- > Regards > dave > -- Regards dave ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly @ 2009-12-11 9:10 ` Dave Young 0 siblings, 0 replies; 16+ messages in thread From: Dave Young @ 2009-12-11 9:10 UTC (permalink / raw) To: Nigel Cunningham Cc: KOSAKI Motohiro, Andrew Morton, Linux Kernel Mailing List, netdev, linux-wireless, David S. Miller, Zhu Yi On Fri, Dec 11, 2009 at 9:47 AM, Dave Young <hidave.darkstar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: > On Fri, Dec 11, 2009 at 6:11 AM, Nigel Cunningham > <ncunningham-VWkGxi2CTS+6c6uEtOJ/EA@public.gmane.org> wrote: >> Dave, could you be more specific? >> >> Is the delay Ksaki has picked out related to your report... > > I can not reproduce the wireless delay today, maybe related to > wireless environment? > >> >> KOSAKI Motohiro wrote: >>> (cc to netdev) >>> >>> Hi net-folks >>> >>>>> [ 561.323866] mtrr: type mismatch for e0000000,10000000 old: >>>>> write-back new: write-combining >>>>> [ 2688.500033] No probe response from AP 00:02:2d:08:51:2b after >>>>> 500ms, disconnecting. >>>>> [ 2689.580376] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) >>> >>> What's mean "No probe response"? Why its point waste 2000sec? Rereading the dmesg I post, I think maybe this delay is not relevant because it is after "PM: Finishing wakeup." The brightness is so low after resume finished that I thought it as resume delay. >> >> [...] >> >>>>> [ 225.731462] ACPI: Preparing to enter system sleep state S3 >>>>> [ 225.754167] Disabling non-boot CPUs ... >>>>> [ 225.809478] CPU 1 is now offline >>>>> [ 225.809481] lockdep: fixing up alternatives. >>>>> [ 225.809487] SMP alternatives: switching to UP code >>>>> [ 225.816500] Extended CMOS year: 2000 >>>>> [ 225.816500] Back to C! >>>>> [ 225.816500] Extended CMOS year: 2000 >>>>> [ 225.816720] Enabling non-boot CPUs ... >>>>> [ 225.818422] lockdep: fixing up alternatives. >>>>> [ 225.818425] SMP alternatives: switching to SMP code >>>>> [ 225.822188] Booting processor 1 APIC 0x1 ip 0x6000 >>>>> [ 225.818021] Initializing CPU#1 >>>>> [ 225.818021] CPU: Physical Processor ID: 0 >>>>> [ 225.818021] CPU: Processor Core ID: 1 >>>>> [ 225.913392] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d >>>>> [ 225.937046] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 >>>>> [ 225.937053] platform microcode: firmware: requesting intel-ucode/06-0f-0d >>>>> [ 225.937179] firmware microcode: parent microcode should not be sleeping >>>>> [ 285.940840] CPU1 is up >> >> ... or the 60 second delay before the CPU1 is up message? > > Yes, this delay occurs every time Then what caused this one, any idea? > >> >> Regards, >> >> Nigel >> > > > > -- > Regards > dave > -- Regards dave -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly 2009-12-10 9:52 ` KOSAKI Motohiro 2009-12-10 22:11 ` Nigel Cunningham @ 2009-12-10 22:29 ` David Miller 2009-12-11 9:09 ` Johannes Berg 1 sibling, 1 reply; 16+ messages in thread From: David Miller @ 2009-12-10 22:29 UTC (permalink / raw) To: kosaki.motohiro; +Cc: hidave.darkstar, akpm, linux-kernel, linux-wireless [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #1: Type: Text/Plain; charset=iso-2022-jp-2, Size: 91988 bytes --] From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Date: Thu, 10 Dec 2009 18:52:51 +0900 (JST) > (cc to netdev) > > Hi net-folks > >> > [ ^[,A ^[(B561.323866] mtrr: type mismatch for e0000000,10000000 old: >> > write-back new: write-combining >> > [ 2688.500033] No probe response from AP 00:02:2d:08:51:2b after >> > 500ms, disconnecting. >> > [ 2689.580376] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) > > What's mean "No probe response"? Why its point waste 2000sec? I think you'll get more responses from the wireless list, replacing netdev with linux-wireless in the CC:... > > > > (intentional full quote) > >> Sorry forgot cc list >> >> >> On Thu, Dec 10, 2009 at 5:27 PM, Dave Young <hidave.darkstar@gmail.com> wrote: >> > Hi, >> > >> > With rencent mm patch sets (since 2.6.32), the resume is too slow with >> > screen being black over 5 minutes >> > >> > (Dell e5400 with intel graphic card) >> > >> > Here is the full dmesg: >> > >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Initializing cgroup subsys cpuset >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Initializing cgroup subsys cpu >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Linux version 2.6.32-mm1 (dave@darkstar) (gcc version >> > 4.2.4) #5 SMP Thu Dec 10 15:23:34 CST 2009 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] BIOS-provided physical RAM map: >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(BBIOS-e820: 0000000000000000 - 000000000009f000 (usable) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(BBIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(BBIOS-e820: 0000000000100000 - 000000003d38d400 (usable) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(BBIOS-e820: 000000003d38d400 - 000000003d38f400 (ACPI NVS) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(BBIOS-e820: 000000003d38f400 - 0000000040000000 (reserved) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(BBIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(BBIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(BBIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(BBIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(BBIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(BBIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(BBIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Notice: NX (Execute Disable) protection missing in CPU >> > or disabled in BIOS! >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] DMI 2.4 present. >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] last_pfn = 0x3d38d max_arch_pfn = 0x100000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] MTRR default type: uncachable >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] MTRR fixed ranges enabled: >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B 00000-9FFFF write-back >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B A0000-BFFFF uncachable >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B C0000-CFFFF write-protect >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B D0000-EFFFF uncachable >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B F0000-FFFFF write-protect >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] MTRR variable ranges enabled: >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B 0 base 000000000 mask C00000000 write-back >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B 1 base 0E0000000 mask FE0000000 uncachable >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B 2 base 03DC00000 mask FFFC00000 uncachable >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B 3 base 03E000000 mask FFE000000 uncachable >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B 4 base 03DB00000 mask FFFF00000 uncachable >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B 5 disabled >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B 6 disabled >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B 7 disabled >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] e820 update range: 000000003db00000 - 0000000040000000 >> > (usable) ==> (reserved) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] e820 update range: 00000000e0000000 - 0000000100000000 >> > (usable) ==> (reserved) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] initial memory mapped : 0 - 02000000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B0000000000 - 0000400000 page 4k >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B0000400000 - 0037400000 page 2M >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B0037400000 - 00377fe000 page 4k >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: RSDP 000fbce0 00024 (v02 DELL ^[,A ^[(B) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: XSDT 3d391e00 00064 (v01 DELL ^[,A ^[(B ^[,A ^[(BM09 ^[,A ^[(B ^[,A ^[(B 27D9041D >> > ASL ^[,A ^[(B00000061) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: FACP 3d391c9c 000F4 (v04 DELL ^[,A ^[(B ^[,A ^[(BM09 ^[,A ^[(B ^[,A ^[(B 27D9041D >> > ASL ^[,A ^[(B00000061) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: DSDT 3d392400 06857 (v02 INT430 SYSFexxx 00001001 >> > INTL 20050624) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: FACS 3d3a0c00 00040 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: HPET 3d391f00 00038 (v01 DELL ^[,A ^[(B ^[,A ^[(BM09 ^[,A ^[(B ^[,A ^[(B 00000001 >> > ASL ^[,A ^[(B00000061) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: DMAR 3d3a0400 000F8 (v01 DELL ^[,A ^[(B ^[,A ^[(BM09 ^[,A ^[(B ^[,A ^[(B 27D9041D >> > ASL ^[,A ^[(B00000061) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: APIC 3d392000 00068 (v01 DELL ^[,A ^[(B ^[,A ^[(BM09 ^[,A ^[(B ^[,A ^[(B 27D9041D >> > ASL ^[,A ^[(B00000047) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: ASF! 3d391c00 00076 (v32 DELL ^[,A ^[(B ^[,A ^[(BM09 ^[,A ^[(B ^[,A ^[(B 27D9041D >> > ASL ^[,A ^[(B00000061) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: MCFG 3d391fc0 0003E (v16 DELL ^[,A ^[(B ^[,A ^[(BM09 ^[,A ^[(B ^[,A ^[(B 27D9041D >> > ASL ^[,A ^[(B00000061) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: TCPA 3d392300 00032 (v01 ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B 00000000 >> > ASL ^[,A ^[(B00000000) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: SSDT 3d3902e7 0066C (v01 ^[,A ^[(BPmRef ^[,A ^[(B ^[,A ^[(BCpuPm 00003000 >> > INTL 20050624) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: Local APIC address 0xfee00000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] 91MB HIGHMEM available. >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] 887MB LOWMEM available. >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B mapped low ram: 0 - 377fe000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B low ram: 0 - 377fe000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B node 0 low ram: 00000000 - 377fe000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B node 0 bootmap 00008000 - 0000ef00 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B #0 [0000000000 - 0000001000] ^[,A ^[(B BIOS data page ==> >> > [0000000000 - 0000001000] >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B #1 [0000001000 - 0000002000] ^[,A ^[(B ^[,A ^[(BEX TRAMPOLINE ==> >> > [0000001000 - 0000002000] >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B #2 [0000006000 - 0000007000] ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B TRAMPOLINE ==> >> > [0000006000 - 0000007000] >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B #3 [0001000000 - 0001c1ed78] ^[,A ^[(B ^[,A ^[(BTEXT DATA BSS ==> >> > [0001000000 - 0001c1ed78] >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B #4 [000009f000 - 0000100000] ^[,A ^[(B ^[,A ^[(BBIOS reserved ==> >> > [000009f000 - 0000100000] >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B #5 [0001c1f000 - 0001c27184] ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(BBRK ==> >> > [0001c1f000 - 0001c27184] >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B #6 [0000002000 - 0000006000] ^[,A ^[(B ^[,A ^[(B ^[,A ^[(BACPI WAKEUP ==> >> > [0000002000 - 0000006000] >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B #7 [0000007000 - 0000008000] ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(BPGTABLE ==> >> > [0000007000 - 0000008000] >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B #8 [0000008000 - 000000f000] ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(BBOOTMAP ==> >> > [0000008000 - 000000f000] >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] sizeof(struct page) = 32 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Zone PFN ranges: >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B DMA ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B0x00000000 -> 0x00001000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B Normal ^[,A ^[(B 0x00001000 -> 0x000377fe >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B HighMem ^[,A ^[(B0x000377fe -> 0x0003d38d >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Movable zone start PFN for each node >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] early_node_map[2] active PFN ranges >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B ^[,A ^[(B 0: 0x00000000 -> 0x0000009f >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B ^[,A ^[(B 0: 0x00000100 -> 0x0003d38d >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] On node 0 totalpages: 250668 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Node 0 memmap at 0xc1c29000 size 8028160 first pfn 0xc1c29000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] free_area_init_node: node 0, pgdat c162db40, >> > node_mem_map c1c29000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B DMA zone: 32 pages used for memmap >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B DMA zone: 0 pages reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B DMA zone: 3967 pages, LIFO batch:0 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B Normal zone: 1744 pages used for memmap >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B Normal zone: 221486 pages, LIFO batch:31 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B HighMem zone: 184 pages used for memmap >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B HighMem zone: 23255 pages, LIFO batch:3 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Using APIC driver default >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: PM-Timer IO Port: 0x1008 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: Local APIC address 0xfee00000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: IRQ0 used by override. >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: IRQ2 used by override. >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: IRQ9 used by override. >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Enabling APIC mode: ^[,A ^[(BFlat. ^[,A ^[(BUsing 1 I/O APICs >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Using ACPI (MADT) for SMP configuration information >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] nr_irqs_gsi: 24 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Allocating PCI resources starting at 40000000 (gap: >> > 40000000:b8000000) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Booting paravirtualized kernel on bare hardware >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s33048 r0 d24296 u2097152 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] pcpu-alloc: s33048 r0 d24296 u2097152 alloc=1*4194304 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] pcpu-alloc: [0] 0 1 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Built 1 zonelists in Zone order, mobility grouping on. >> > Total pages: 248708 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Kernel command line: BOOT_IMAGE=mm ro root=802 >> > vt.default_utf8=0 resume=/dev/sda8 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Enabling fast FPU save and restore... done. >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Enabling unmasked SIMD FPU exception support... done. >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Initializing CPU#0 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Initializing HighMem for node 0 (000377fe:0003d38d) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Memory: 980956k/1003060k available (3904k kernel code, >> > 21272k reserved, 2488k data, 408k init, 93756k highmem) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] virtual kernel memory layout: >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B ^[,A ^[(B fixmap ^[,A ^[(B: 0xfff90000 - 0xfffff000 ^[,A ^[(B ( 444 kB) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B ^[,A ^[(B pkmap ^[,A ^[(B : 0xff800000 - 0xffc00000 ^[,A ^[(B (4096 kB) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B ^[,A ^[(B vmalloc : 0xf7ffe000 - 0xff7fe000 ^[,A ^[(B ( 120 MB) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B ^[,A ^[(B lowmem ^[,A ^[(B: 0xc0000000 - 0xf77fe000 ^[,A ^[(B ( 887 MB) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B .init : 0xc163f000 - 0xc16a5000 ^[,A ^[(B ( 408 kB) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B .data : 0xc13d0244 - 0xc163e5a0 ^[,A ^[(B (2488 kB) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B .text : 0xc1000000 - 0xc13d0244 ^[,A ^[(B (3904 kB) >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Checking if this processor honours the WP bit even in >> > supervisor mode...Ok. >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Hierarchical RCU implementation. >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] NR_IRQS:320 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Extended CMOS year: 2000 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Console: colour dummy device 80x25 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] console [tty0] enabled >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, >> > Inc., Ingo Molnar >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ... MAX_LOCKDEP_SUBCLASSES: ^[,A ^[(B8 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ... MAX_LOCK_DEPTH: ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B48 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ... MAX_LOCKDEP_KEYS: ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B8191 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ... CLASSHASH_SIZE: ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B4096 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ... MAX_LOCKDEP_ENTRIES: ^[,A ^[(B ^[,A ^[(B 16384 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ... MAX_LOCKDEP_CHAINS: ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B32768 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ... CHAINHASH_SIZE: ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B16384 >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(Bmemory used by lock dependency info: 3567 kB >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] ^[,A ^[(Bper task-struct memory footprint: 1152 bytes >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] hpet clockevent registered >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Fast TSC calibration using PIT >> > [ ^[,A ^[(B ^[,A ^[(B0.000000] Detected 1995.100 MHz processor. >> > [ ^[,A ^[(B ^[,A ^[(B0.003349] Calibrating delay loop (skipped), value calculated >> > using timer frequency.. 3991.45 BogoMIPS (lpj=6650333) >> > [ ^[,A ^[(B ^[,A ^[(B0.003611] Security Framework initialized >> > [ ^[,A ^[(B ^[,A ^[(B0.003717] Mount-cache hash table entries: 512 >> > [ ^[,A ^[(B ^[,A ^[(B0.006964] Initializing cgroup subsys ns >> > [ ^[,A ^[(B ^[,A ^[(B0.006972] Initializing cgroup subsys cpuacct >> > [ ^[,A ^[(B ^[,A ^[(B0.007103] CPU: Physical Processor ID: 0 >> > [ ^[,A ^[(B ^[,A ^[(B0.007108] CPU: Processor Core ID: 0 >> > [ ^[,A ^[(B ^[,A ^[(B0.007114] using mwait in idle threads. >> > [ ^[,A ^[(B ^[,A ^[(B0.007122] Performance Events: Core2 events, Intel PMU driver. >> > [ ^[,A ^[(B ^[,A ^[(B0.007153] ... version: ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B2 >> > [ ^[,A ^[(B ^[,A ^[(B0.007158] ... bit width: ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B40 >> > [ ^[,A ^[(B ^[,A ^[(B0.007163] ... generic registers: ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B2 >> > [ ^[,A ^[(B ^[,A ^[(B0.007168] ... value mask: ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B 000000ffffffffff >> > [ ^[,A ^[(B ^[,A ^[(B0.007173] ... max period: ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B 000000007fffffff >> > [ ^[,A ^[(B ^[,A ^[(B0.007179] ... fixed-purpose events: ^[,A ^[(B 3 >> > [ ^[,A ^[(B ^[,A ^[(B0.007184] ... event mask: ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B 0000000700000003 >> > [ ^[,A ^[(B ^[,A ^[(B0.007199] Checking 'hlt' instruction... OK. >> > [ ^[,A ^[(B ^[,A ^[(B0.021587] ACPI: Core revision 20091112 >> > [ ^[,A ^[(B ^[,A ^[(B0.043974] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >> > [ ^[,A ^[(B ^[,A ^[(B0.079689] CPU0: Intel(R) Core(TM)2 Duo CPU ^[,A ^[(B ^[,A ^[(B T7250 ^[,A ^[(B@ 2.00GHz stepping 0d >> > [ ^[,A ^[(B ^[,A ^[(B0.079999] lockdep: fixing up alternatives. >> > [ ^[,A ^[(B ^[,A ^[(B0.079999] Booting processor 1 APIC 0x1 ip 0x6000 >> > [ ^[,A ^[(B ^[,A ^[(B0.079999] Initializing CPU#1 >> > [ ^[,A ^[(B ^[,A ^[(B0.079999] CPU: Physical Processor ID: 0 >> > [ ^[,A ^[(B ^[,A ^[(B0.079999] CPU: Processor Core ID: 1 >> > [ ^[,A ^[(B ^[,A ^[(B0.170015] CPU1: Intel(R) Core(TM)2 Duo CPU ^[,A ^[(B ^[,A ^[(B T7250 ^[,A ^[(B@ 2.00GHz stepping 0d >> > [ ^[,A ^[(B ^[,A ^[(B0.173386] Brought up 2 CPUs >> > [ ^[,A ^[(B ^[,A ^[(B0.173393] Total of 2 processors activated (7983.61 BogoMIPS). >> > [ ^[,A ^[(B ^[,A ^[(B0.175046] khelper used greatest stack depth: 6928 bytes left >> > [ ^[,A ^[(B ^[,A ^[(B0.175046] regulator: core version 0.5 >> > [ ^[,A ^[(B ^[,A ^[(B0.176722] Time: 15:30:08 ^[,A ^[(BDate: 12/10/09 >> > [ ^[,A ^[(B ^[,A ^[(B0.176823] khelper used greatest stack depth: 6728 bytes left >> > [ ^[,A ^[(B ^[,A ^[(B0.176984] NET: Registered protocol family 16 >> > [ ^[,A ^[(B ^[,A ^[(B0.180083] ACPI: bus type pci registered >> > [ ^[,A ^[(B ^[,A ^[(B0.180201] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem >> > 0xf8000000-0xfbffffff] (base 0xf8000000) >> > [ ^[,A ^[(B ^[,A ^[(B0.180201] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 >> > [ ^[,A ^[(B ^[,A ^[(B0.180201] PCI: Using MMCONFIG for extended config space >> > [ ^[,A ^[(B ^[,A ^[(B0.180201] PCI: Using configuration type 1 for base access >> > [ ^[,A ^[(B ^[,A ^[(B0.203625] bio: create slab <bio-0> at 0 >> > [ ^[,A ^[(B ^[,A ^[(B0.213198] ACPI: EC: Look up EC in DSDT >> > [ ^[,A ^[(B ^[,A ^[(B0.213825] ACPI: BIOS _OSI(Linux) query ignored >> > [ ^[,A ^[(B ^[,A ^[(B0.276349] ACPI: SSDT 3d3a0c80 00043 (v01 ^[,A ^[(BLMPWR ^[,A ^[(BDELLLOM 00001001 >> > INTL 20050624) >> > [ ^[,A ^[(B ^[,A ^[(B0.323792] ACPI: Interpreter enabled >> > [ ^[,A ^[(B ^[,A ^[(B0.323804] ACPI: (supports S0 S3 S4 S5) >> > [ ^[,A ^[(B ^[,A ^[(B0.323895] ACPI: Using IOAPIC for interrupt routing >> > [ ^[,A ^[(B ^[,A ^[(B0.490535] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930 >> > [ ^[,A ^[(B ^[,A ^[(B0.493757] ACPI: No dock devices found. >> > [ ^[,A ^[(B ^[,A ^[(B0.529913] ACPI: PCI Root Bridge [PCI0] (0000:00) >> > [ ^[,A ^[(B ^[,A ^[(B0.530130] pci_root PNP0A03:00: ignoring host bridge windows from >> > ACPI; boot with "pci=use_crs" to use them >> > [ ^[,A ^[(B ^[,A ^[(B0.600625] pci_root PNP0A03:00: host bridge window [io >> > 0x0000-0x0cf7] (ignored) >> > [ ^[,A ^[(B ^[,A ^[(B0.600630] pci_root PNP0A03:00: host bridge window [io >> > 0x0d00-0xffff] (ignored) >> > [ ^[,A ^[(B ^[,A ^[(B0.600634] pci_root PNP0A03:00: host bridge window [mem >> > 0x000a0000-0x000bffff] (ignored) >> > [ ^[,A ^[(B ^[,A ^[(B0.600637] pci_root PNP0A03:00: host bridge window [mem >> > 0x000d0000-0x000dffff] (ignored) >> > [ ^[,A ^[(B ^[,A ^[(B0.600641] pci_root PNP0A03:00: host bridge window [mem >> > 0x40000000-0xf7ffffff] (ignored) >> > [ ^[,A ^[(B ^[,A ^[(B0.600645] pci_root PNP0A03:00: host bridge window [mem >> > 0xfc000000-0xfebfffff] (ignored) >> > [ ^[,A ^[(B ^[,A ^[(B0.600648] pci_root PNP0A03:00: host bridge window [mem >> > 0xfec10000-0xfecfffff] (ignored) >> > [ ^[,A ^[(B ^[,A ^[(B0.600652] pci_root PNP0A03:00: host bridge window [mem >> > 0xfed1c000-0xfed1ffff] (ignored) >> > [ ^[,A ^[(B ^[,A ^[(B0.600656] pci_root PNP0A03:00: host bridge window [mem >> > 0xfed90000-0xfed9ffff] (ignored) >> > [ ^[,A ^[(B ^[,A ^[(B0.600659] pci_root PNP0A03:00: host bridge window [mem >> > 0xfed40000-0xfed44fff] (ignored) >> > [ ^[,A ^[(B ^[,A ^[(B0.600663] pci_root PNP0A03:00: host bridge window [mem >> > 0xfeda7000-0xfedfffff] (ignored) >> > [ ^[,A ^[(B ^[,A ^[(B0.600667] pci_root PNP0A03:00: host bridge window [mem >> > 0xfee10000-0xff9fffff] (ignored) >> > [ ^[,A ^[(B ^[,A ^[(B0.600670] pci_root PNP0A03:00: host bridge window [mem >> > 0xffb80000-0xffe7ffff] (ignored) >> > [ ^[,A ^[(B ^[,A ^[(B0.600882] pci 0000:00:02.0: reg 10: [mem 0xf6c00000-0xf6ffffff 64bit] >> > [ ^[,A ^[(B ^[,A ^[(B0.600897] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.600906] pci 0000:00:02.0: reg 20: [io ^[,A ^[(B0xefe8-0xefef] >> > [ ^[,A ^[(B ^[,A ^[(B0.600999] pci 0000:00:02.1: reg 10: [mem 0xf6b00000-0xf6bfffff 64bit] >> > [ ^[,A ^[(B ^[,A ^[(B0.601223] pci 0000:00:1a.0: reg 20: [io ^[,A ^[(B0x6f60-0x6f7f] >> > [ ^[,A ^[(B ^[,A ^[(B0.601374] pci 0000:00:1a.1: reg 20: [io ^[,A ^[(B0x6f80-0x6f9f] >> > [ ^[,A ^[(B ^[,A ^[(B0.601525] pci 0000:00:1a.2: reg 20: [io ^[,A ^[(B0x6fa0-0x6fbf] >> > [ ^[,A ^[(B ^[,A ^[(B0.601673] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] >> > [ ^[,A ^[(B ^[,A ^[(B0.601783] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold >> > [ ^[,A ^[(B ^[,A ^[(B0.601791] pci 0000:00:1a.7: PME# disabled >> > [ ^[,A ^[(B ^[,A ^[(B0.601875] pci 0000:00:1b.0: reg 10: [mem 0xf6afc000-0xf6afffff 64bit] >> > [ ^[,A ^[(B ^[,A ^[(B0.601974] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >> > [ ^[,A ^[(B ^[,A ^[(B0.601981] pci 0000:00:1b.0: PME# disabled >> > [ ^[,A ^[(B ^[,A ^[(B0.602144] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >> > [ ^[,A ^[(B ^[,A ^[(B0.602151] pci 0000:00:1c.0: PME# disabled >> > [ ^[,A ^[(B ^[,A ^[(B0.602322] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >> > [ ^[,A ^[(B ^[,A ^[(B0.602329] pci 0000:00:1c.1: PME# disabled >> > [ ^[,A ^[(B ^[,A ^[(B0.602501] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold >> > [ ^[,A ^[(B ^[,A ^[(B0.602509] pci 0000:00:1c.4: PME# disabled >> > [ ^[,A ^[(B ^[,A ^[(B0.602629] pci 0000:00:1d.0: reg 20: [io ^[,A ^[(B0x6f00-0x6f1f] >> > [ ^[,A ^[(B ^[,A ^[(B0.602783] pci 0000:00:1d.1: reg 20: [io ^[,A ^[(B0x6f20-0x6f3f] >> > [ ^[,A ^[(B ^[,A ^[(B0.602934] pci 0000:00:1d.2: reg 20: [io ^[,A ^[(B0x6f40-0x6f5f] >> > [ ^[,A ^[(B ^[,A ^[(B0.603078] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] >> > [ ^[,A ^[(B ^[,A ^[(B0.603187] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold >> > [ ^[,A ^[(B ^[,A ^[(B0.603195] pci 0000:00:1d.7: PME# disabled >> > [ ^[,A ^[(B ^[,A ^[(B0.603580] pci 0000:00:1f.2: reg 10: [io ^[,A ^[(B0x6e70-0x6e77] >> > [ ^[,A ^[(B ^[,A ^[(B0.603592] pci 0000:00:1f.2: reg 14: [io ^[,A ^[(B0x6e78-0x6e7b] >> > [ ^[,A ^[(B ^[,A ^[(B0.603604] pci 0000:00:1f.2: reg 18: [io ^[,A ^[(B0x6e80-0x6e87] >> > [ ^[,A ^[(B ^[,A ^[(B0.603616] pci 0000:00:1f.2: reg 1c: [io ^[,A ^[(B0x6e88-0x6e8b] >> > [ ^[,A ^[(B ^[,A ^[(B0.603628] pci 0000:00:1f.2: reg 20: [io ^[,A ^[(B0x6ea0-0x6eaf] >> > [ ^[,A ^[(B ^[,A ^[(B0.603640] pci 0000:00:1f.2: reg 24: [io ^[,A ^[(B0x6e90-0x6e9f] >> > [ ^[,A ^[(B ^[,A ^[(B0.603762] pci 0000:00:1f.3: reg 10: [mem 0xf6afbf00-0xf6afbfff 64bit] >> > [ ^[,A ^[(B ^[,A ^[(B0.603793] pci 0000:00:1f.3: reg 20: [io ^[,A ^[(B0x1100-0x111f] >> > [ ^[,A ^[(B ^[,A ^[(B0.603905] pci 0000:00:1f.5: reg 10: [io ^[,A ^[(B0x6eb0-0x6eb7] >> > [ ^[,A ^[(B ^[,A ^[(B0.603917] pci 0000:00:1f.5: reg 14: [io ^[,A ^[(B0x6eb8-0x6ebb] >> > [ ^[,A ^[(B ^[,A ^[(B0.603929] pci 0000:00:1f.5: reg 18: [io ^[,A ^[(B0x6ec0-0x6ec7] >> > [ ^[,A ^[(B ^[,A ^[(B0.603941] pci 0000:00:1f.5: reg 1c: [io ^[,A ^[(B0x6ec8-0x6ecb] >> > [ ^[,A ^[(B ^[,A ^[(B0.603953] pci 0000:00:1f.5: reg 20: [io ^[,A ^[(B0x6ee0-0x6eef] >> > [ ^[,A ^[(B ^[,A ^[(B0.603965] pci 0000:00:1f.5: reg 24: [io ^[,A ^[(B0xeff0-0xefff] >> > [ ^[,A ^[(B ^[,A ^[(B0.604140] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] >> > [ ^[,A ^[(B ^[,A ^[(B0.604519] pci 0000:0c:00.0: reg 10: [mem 0xf69fc000-0xf69fffff 64bit] >> > [ ^[,A ^[(B ^[,A ^[(B0.604778] pci 0000:0c:00.0: supports D1 D2 >> > [ ^[,A ^[(B ^[,A ^[(B0.604781] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold >> > [ ^[,A ^[(B ^[,A ^[(B0.604796] pci 0000:0c:00.0: PME# disabled >> > [ ^[,A ^[(B ^[,A ^[(B0.604958] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] >> > [ ^[,A ^[(B ^[,A ^[(B0.604974] pci 0000:00:1c.1: ^[,A ^[(B bridge window [mem 0xf6900000-0xf69fffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.605134] pci 0000:09:00.0: reg 10: [mem 0xf68f0000-0xf68fffff 64bit] >> > [ ^[,A ^[(B ^[,A ^[(B0.605282] pci 0000:09:00.0: PME# supported from D3hot D3cold >> > [ ^[,A ^[(B ^[,A ^[(B0.605291] pci 0000:09:00.0: PME# disabled >> > [ ^[,A ^[(B ^[,A ^[(B0.605402] pci 0000:00:1c.4: PCI bridge to [bus 09-09] >> > [ ^[,A ^[(B ^[,A ^[(B0.605418] pci 0000:00:1c.4: ^[,A ^[(B bridge window [mem 0xf6800000-0xf68fffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.605503] pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.605541] pci 0000:02:01.0: supports D1 D2 >> > [ ^[,A ^[(B ^[,A ^[(B0.605544] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold >> > [ ^[,A ^[(B ^[,A ^[(B0.605552] pci 0000:02:01.0: PME# disabled >> > [ ^[,A ^[(B ^[,A ^[(B0.605617] pci 0000:02:01.1: reg 10: [mem 0xf67ff800-0xf67fffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.605711] pci 0000:02:01.1: supports D1 D2 >> > [ ^[,A ^[(B ^[,A ^[(B0.605714] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold >> > [ ^[,A ^[(B ^[,A ^[(B0.605721] pci 0000:02:01.1: PME# disabled >> > [ ^[,A ^[(B ^[,A ^[(B0.605790] pci 0000:02:01.2: reg 10: [mem 0xf67ff700-0xf67ff7ff] >> > [ ^[,A ^[(B ^[,A ^[(B0.605884] pci 0000:02:01.2: supports D1 D2 >> > [ ^[,A ^[(B ^[,A ^[(B0.605887] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold >> > [ ^[,A ^[(B ^[,A ^[(B0.605895] pci 0000:02:01.2: PME# disabled >> > [ ^[,A ^[(B ^[,A ^[(B0.606011] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode) >> > [ ^[,A ^[(B ^[,A ^[(B0.606028] pci 0000:00:1e.0: ^[,A ^[(B bridge window [mem 0xf6700000-0xf67fffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.606075] pci_bus 0000:03: [bus 03-06] partially hidden behind >> > transparent bridge 0000:02 [bus 02-03] >> > [ ^[,A ^[(B ^[,A ^[(B0.606125] pci_bus 0000:00: on NUMA node 0 >> > [ ^[,A ^[(B ^[,A ^[(B0.606134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >> > [ ^[,A ^[(B ^[,A ^[(B0.607778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] >> > [ ^[,A ^[(B ^[,A ^[(B0.608386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] >> > [ ^[,A ^[(B ^[,A ^[(B0.608653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] >> > [ ^[,A ^[(B ^[,A ^[(B0.608946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] >> > [ ^[,A ^[(B ^[,A ^[(B0.667029] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) >> > [ ^[,A ^[(B ^[,A ^[(B0.667370] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4 >> > [ ^[,A ^[(B ^[,A ^[(B0.667708] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *3 >> > [ ^[,A ^[(B ^[,A ^[(B0.668044] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) >> > [ ^[,A ^[(B ^[,A ^[(B0.668382] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) >> > [ ^[,A ^[(B ^[,A ^[(B0.670294] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) >> > [ ^[,A ^[(B ^[,A ^[(B0.670639] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) >> > [ ^[,A ^[(B ^[,A ^[(B0.670927] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 >> > 12 14 15) *0, disabled. >> > [ ^[,A ^[(B ^[,A ^[(B0.671151] vgaarb: device added: >> > PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none >> > [ ^[,A ^[(B ^[,A ^[(B0.671151] vgaarb: loaded >> > [ ^[,A ^[(B ^[,A ^[(B0.673347] SCSI subsystem initialized >> > [ ^[,A ^[(B ^[,A ^[(B0.673534] libata version 3.00 loaded. >> > [ ^[,A ^[(B ^[,A ^[(B0.673633] usbcore: registered new interface driver usbfs >> > [ ^[,A ^[(B ^[,A ^[(B0.673633] usbcore: registered new interface driver hub >> > [ ^[,A ^[(B ^[,A ^[(B0.673633] usbcore: registered new device driver usb >> > [ ^[,A ^[(B ^[,A ^[(B0.673697] PCI: Using ACPI for IRQ routing >> > [ ^[,A ^[(B ^[,A ^[(B0.673697] PCI: pci_cache_line_size set to 64 bytes >> > [ ^[,A ^[(B ^[,A ^[(B0.677479] HPET: 4 timers in total, 0 timers will be used for per-cpu timer >> > [ ^[,A ^[(B ^[,A ^[(B0.677479] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 >> > [ ^[,A ^[(B ^[,A ^[(B0.677479] hpet0: 4 comparators, 64-bit 14.318180 MHz counter >> > [ ^[,A ^[(B ^[,A ^[(B0.686678] Switching to clocksource tsc >> > [ ^[,A ^[(B ^[,A ^[(B0.698122] pnp: PnP ACPI init >> > [ ^[,A ^[(B ^[,A ^[(B0.698167] ACPI: bus type pnp registered >> > [ ^[,A ^[(B ^[,A ^[(B0.810987] pnp: PnP ACPI: found 13 devices >> > [ ^[,A ^[(B ^[,A ^[(B0.810996] ACPI: ACPI bus type pnp unregistered >> > [ ^[,A ^[(B ^[,A ^[(B0.811028] system 00:05: [io ^[,A ^[(B0x0c80-0x0caf] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811038] system 00:05: [io ^[,A ^[(B0x0cc0-0x0cff] could not be reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811062] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811085] system 00:09: [io ^[,A ^[(B0x0cb0-0x0cbb] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811104] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811126] system 00:0a: [io ^[,A ^[(B0x0900-0x092f] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811135] system 00:0a: [io ^[,A ^[(B0x0931-0x0933] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811144] system 00:0a: [io ^[,A ^[(B0x0935-0x097f] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811152] system 00:0a: [io ^[,A ^[(B0x04d0-0x04d1] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811161] system 00:0a: [io ^[,A ^[(B0x1000-0x1005] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811170] system 00:0a: [io ^[,A ^[(B0x1008-0x100f] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811192] system 00:0b: [io ^[,A ^[(B0xf400-0xf4fe] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811201] system 00:0b: [io ^[,A ^[(B0x1006-0x1007] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811211] system 00:0b: [io ^[,A ^[(B0x100a-0x1059] could not be reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811219] system 00:0b: [io ^[,A ^[(B0x1060-0x107f] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811228] system 00:0b: [io ^[,A ^[(B0x1080-0x10bf] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811236] system 00:0b: [io ^[,A ^[(B0x1100-0x111f] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811245] system 00:0b: [io ^[,A ^[(B0x1010-0x102f] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811253] system 00:0b: [io ^[,A ^[(B0x0809] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811276] system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811287] system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811297] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811307] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811318] system 00:0c: [mem 0x00100000-0x3d38d3ff] could not be reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811328] system 00:0c: [mem 0x3d38d400-0x3dafffff] could not be reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811338] system 00:0c: [mem 0x3db00000-0x3dbfffff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811347] system 00:0c: [mem 0xffe80000-0xffffffff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811356] system 00:0c: [mem 0xffa00000-0xffb7ffff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811366] system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811376] system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811385] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811394] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811403] system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811413] system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811423] system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811432] system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811441] system 00:0c: [mem 0xfed1c800-0xfed1cfff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811451] system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.811460] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved >> > [ ^[,A ^[(B ^[,A ^[(B0.848952] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 >> > (level, low) -> IRQ 17 >> > [ ^[,A ^[(B ^[,A ^[(B0.848977] b43-pci-bridge 0000:0c:00.0: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B0.863385] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243) >> > [ ^[,A ^[(B ^[,A ^[(B0.863405] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, >> > vendor 0x4243) >> > [ ^[,A ^[(B ^[,A ^[(B0.863425] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243) >> > [ ^[,A ^[(B ^[,A ^[(B0.863445] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243) >> > [ ^[,A ^[(B ^[,A ^[(B0.879792] ssb: Found rev 1 PMU (capabilities 0x02A62F01) >> > [ ^[,A ^[(B ^[,A ^[(B0.889038] ssb: SPROM revision 8 detected. >> > [ ^[,A ^[(B ^[,A ^[(B0.903507] ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0 >> > [ ^[,A ^[(B ^[,A ^[(B0.903853] pci 0000:00:1e.0: BAR 9: assigned [mem >> > 0x40000000-0x43ffffff pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.903864] pci 0000:00:1c.0: BAR 8: assigned [mem 0x44000000-0x441fffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.903873] pci 0000:00:1c.0: BAR 9: assigned [mem >> > 0x44200000-0x443fffff 64bit pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.903883] pci 0000:00:1c.1: BAR 9: assigned [mem >> > 0x44400000-0x445fffff 64bit pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.903893] pci 0000:00:1c.4: BAR 9: assigned [mem >> > 0x44600000-0x447fffff 64bit pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.903903] pci 0000:00:1c.0: BAR 7: assigned [io ^[,A ^[(B0x2000-0x2fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.903911] pci 0000:00:1c.1: BAR 7: assigned [io ^[,A ^[(B0x3000-0x3fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.903919] pci 0000:00:1c.4: BAR 7: assigned [io ^[,A ^[(B0x4000-0x4fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.903927] pci 0000:00:1e.0: BAR 7: assigned [io ^[,A ^[(B0x5000-0x5fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.903935] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] >> > [ ^[,A ^[(B ^[,A ^[(B0.903944] pci 0000:00:1c.0: ^[,A ^[(B bridge window [io ^[,A ^[(B0x2000-0x2fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.903958] pci 0000:00:1c.0: ^[,A ^[(B bridge window [mem 0x44000000-0x441fffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.903970] pci 0000:00:1c.0: ^[,A ^[(B bridge window [mem >> > 0x44200000-0x443fffff 64bit pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.903987] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] >> > [ ^[,A ^[(B ^[,A ^[(B0.903996] pci 0000:00:1c.1: ^[,A ^[(B bridge window [io ^[,A ^[(B0x3000-0x3fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904009] pci 0000:00:1c.1: ^[,A ^[(B bridge window [mem 0xf6900000-0xf69fffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904021] pci 0000:00:1c.1: ^[,A ^[(B bridge window [mem >> > 0x44400000-0x445fffff 64bit pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.904038] pci 0000:00:1c.4: PCI bridge to [bus 09-09] >> > [ ^[,A ^[(B ^[,A ^[(B0.904047] pci 0000:00:1c.4: ^[,A ^[(B bridge window [io ^[,A ^[(B0x4000-0x4fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904061] pci 0000:00:1c.4: ^[,A ^[(B bridge window [mem 0xf6800000-0xf68fffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904073] pci 0000:00:1c.4: ^[,A ^[(B bridge window [mem >> > 0x44600000-0x447fffff 64bit pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.904094] pci 0000:02:01.0: BAR 9: assigned [mem >> > 0x40000000-0x43ffffff pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.904105] pci 0000:02:01.0: BAR 10: assigned [mem 0x48000000-0x4bffffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904113] pci 0000:02:01.0: BAR 0: assigned [mem 0xf6700000-0xf6700fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904126] pci 0000:02:01.0: BAR 0: set to [mem >> > 0xf6700000-0xf6700fff] (PCI address [0xf6700000-0xf6700fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904137] pci 0000:02:01.0: BAR 7: assigned [io ^[,A ^[(B0x5000-0x50ff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904145] pci 0000:02:01.0: BAR 8: assigned [io ^[,A ^[(B0x5100-0x51ff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904152] pci 0000:02:01.0: CardBus bridge to [bus 03-06] >> > [ ^[,A ^[(B ^[,A ^[(B0.904159] pci 0000:02:01.0: ^[,A ^[(B bridge window [io ^[,A ^[(B0x5000-0x50ff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904170] pci 0000:02:01.0: ^[,A ^[(B bridge window [io ^[,A ^[(B0x5100-0x51ff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904182] pci 0000:02:01.0: ^[,A ^[(B bridge window [mem >> > 0x40000000-0x43ffffff pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.904194] pci 0000:02:01.0: ^[,A ^[(B bridge window [mem 0x48000000-0x4bffffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904206] pci 0000:00:1e.0: PCI bridge to [bus 02-03] >> > [ ^[,A ^[(B ^[,A ^[(B0.904214] pci 0000:00:1e.0: ^[,A ^[(B bridge window [io ^[,A ^[(B0x5000-0x5fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904228] pci 0000:00:1e.0: ^[,A ^[(B bridge window [mem 0xf6700000-0xf67fffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904240] pci 0000:00:1e.0: ^[,A ^[(B bridge window [mem >> > 0x40000000-0x43ffffff pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.904273] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> > [ ^[,A ^[(B ^[,A ^[(B0.904285] pci 0000:00:1c.0: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B0.904302] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >> > [ ^[,A ^[(B ^[,A ^[(B0.904314] pci 0000:00:1c.1: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B0.904330] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> > [ ^[,A ^[(B ^[,A ^[(B0.904342] pci 0000:00:1c.4: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B0.904355] pci 0000:00:1e.0: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B0.904375] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 >> > [ ^[,A ^[(B ^[,A ^[(B0.904388] pci_bus 0000:00: resource 0 [io ^[,A ^[(B0x0000-0xffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904392] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904395] pci_bus 0000:0b: resource 0 [io ^[,A ^[(B0x2000-0x2fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904398] pci_bus 0000:0b: resource 1 [mem 0x44000000-0x441fffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904402] pci_bus 0000:0b: resource 2 [mem 0x44200000-0x443fffff >> > 64bit pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.904405] pci_bus 0000:0c: resource 0 [io ^[,A ^[(B0x3000-0x3fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904408] pci_bus 0000:0c: resource 1 [mem 0xf6900000-0xf69fffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904412] pci_bus 0000:0c: resource 2 [mem 0x44400000-0x445fffff >> > 64bit pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.904415] pci_bus 0000:09: resource 0 [io ^[,A ^[(B0x4000-0x4fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904418] pci_bus 0000:09: resource 1 [mem 0xf6800000-0xf68fffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904422] pci_bus 0000:09: resource 2 [mem 0x44600000-0x447fffff >> > 64bit pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.904425] pci_bus 0000:02: resource 0 [io ^[,A ^[(B0x5000-0x5fff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904428] pci_bus 0000:02: resource 1 [mem 0xf6700000-0xf67fffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904432] pci_bus 0000:02: resource 2 [mem 0x40000000-0x43ffffff pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.904435] pci_bus 0000:02: resource 3 [io ^[,A ^[(B0x0000-0xffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904438] pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904441] pci_bus 0000:03: resource 0 [io ^[,A ^[(B0x5000-0x50ff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904444] pci_bus 0000:03: resource 1 [io ^[,A ^[(B0x5100-0x51ff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904447] pci_bus 0000:03: resource 2 [mem 0x40000000-0x43ffffff pref] >> > [ ^[,A ^[(B ^[,A ^[(B0.904451] pci_bus 0000:03: resource 3 [mem 0x48000000-0x4bffffff] >> > [ ^[,A ^[(B ^[,A ^[(B0.904632] NET: Registered protocol family 2 >> > [ ^[,A ^[(B ^[,A ^[(B0.904933] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >> > [ ^[,A ^[(B ^[,A ^[(B0.905890] TCP established hash table entries: 131072 (order: 8, >> > 1048576 bytes) >> > [ ^[,A ^[(B ^[,A ^[(B0.906395] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) >> > [ ^[,A ^[(B ^[,A ^[(B0.914821] TCP: Hash tables configured (established 131072 bind 65536) >> > [ ^[,A ^[(B ^[,A ^[(B0.914889] TCP reno registered >> > [ ^[,A ^[(B ^[,A ^[(B0.914906] UDP hash table entries: 512 (order: 3, 40960 bytes) >> > [ ^[,A ^[(B ^[,A ^[(B0.915056] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) >> > [ ^[,A ^[(B ^[,A ^[(B0.915548] NET: Registered protocol family 1 >> > [ ^[,A ^[(B ^[,A ^[(B0.915594] pci 0000:00:02.0: Boot video device >> > [ ^[,A ^[(B ^[,A ^[(B0.916138] PCI: CLS 64 bytes, default 64 >> > [ ^[,A ^[(B ^[,A ^[(B0.920703] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3 >> > [ ^[,A ^[(B ^[,A ^[(B0.920737] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 >> > [ ^[,A ^[(B ^[,A ^[(B0.920934] Microcode Update Driver: v2.00 >> > <tigran@aivazian.fsnet.co.uk>, Peter Oruba >> > [ ^[,A ^[(B ^[,A ^[(B0.921968] audit: initializing netlink socket (disabled) >> > [ ^[,A ^[(B ^[,A ^[(B0.922049] type=2000 audit(1260459007.916:1): initialized >> > [ ^[,A ^[(B ^[,A ^[(B0.930909] highmem bounce pool size: 64 pages >> > [ ^[,A ^[(B ^[,A ^[(B0.930924] HugeTLB registered 4 MB page size, pre-allocated 0 pages >> > [ ^[,A ^[(B ^[,A ^[(B0.931615] VFS: Disk quotas dquot_6.5.2 >> > [ ^[,A ^[(B ^[,A ^[(B0.931702] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >> > [ ^[,A ^[(B ^[,A ^[(B0.933146] Btrfs loaded >> > [ ^[,A ^[(B ^[,A ^[(B0.933162] msgmni has been set to 1733 >> > [ ^[,A ^[(B ^[,A ^[(B0.934396] alg: No test for stdrng (krng) >> > [ ^[,A ^[(B ^[,A ^[(B0.934614] Block layer SCSI generic (bsg) driver version 0.4 >> > loaded (major 253) >> > [ ^[,A ^[(B ^[,A ^[(B0.934641] io scheduler noop registered >> > [ ^[,A ^[(B ^[,A ^[(B0.934647] io scheduler deadline registered >> > [ ^[,A ^[(B ^[,A ^[(B0.934697] io scheduler cfq registered (default) >> > [ ^[,A ^[(B ^[,A ^[(B0.935545] pcieport 0000:00:1c.0: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B0.935634] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X >> > [ ^[,A ^[(B ^[,A ^[(B0.936286] pcieport 0000:00:1c.1: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B0.936377] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X >> > [ ^[,A ^[(B ^[,A ^[(B0.937034] pcieport 0000:00:1c.4: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B0.937118] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X >> > [ ^[,A ^[(B ^[,A ^[(B0.938238] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >> > [ ^[,A ^[(B ^[,A ^[(B0.939692] ALI M7101 PMU not found. >> > [ ^[,A ^[(B ^[,A ^[(B0.940148] vesafb: framebuffer at 0xe0000000, mapped to >> > 0xf8080000, using 3072k, total 32704k >> > [ ^[,A ^[(B ^[,A ^[(B0.940158] vesafb: mode is 1024x768x16, linelength=2048, pages=20 >> > [ ^[,A ^[(B ^[,A ^[(B0.940165] vesafb: scrolling: redraw >> > [ ^[,A ^[(B ^[,A ^[(B0.940171] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >> > [ ^[,A ^[(B ^[,A ^[(B0.953782] Console: switching to colour frame buffer device 128x48 >> > [ ^[,A ^[(B ^[,A ^[(B0.966131] fb0: VESA VGA frame buffer device >> > [ ^[,A ^[(B ^[,A ^[(B0.967114] ACPI: AC Adapter [AC] (on-line) >> > [ ^[,A ^[(B ^[,A ^[(B0.968048] input: Lid Switch as >> > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 >> > [ ^[,A ^[(B ^[,A ^[(B0.970682] ACPI: Lid Switch [LID] >> > [ ^[,A ^[(B ^[,A ^[(B0.971064] input: Power Button as >> > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 >> > [ ^[,A ^[(B ^[,A ^[(B0.971270] ACPI: Power Button [PBTN] >> > [ ^[,A ^[(B ^[,A ^[(B0.971668] input: Sleep Button as >> > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 >> > [ ^[,A ^[(B ^[,A ^[(B0.971869] ACPI: Sleep Button [SBTN] >> > [ ^[,A ^[(B ^[,A ^[(B0.973787] ACPI: SSDT 3d390953 002C3 (v01 ^[,A ^[(BPmRef ^[,A ^[(B BspIst 00003000 >> > INTL 20050624) >> > [ ^[,A ^[(B ^[,A ^[(B0.976373] ACPI: SSDT 3d390ded 005C6 (v01 ^[,A ^[(BPmRef ^[,A ^[(B BspCst 00003001 >> > INTL 20050624) >> > [ ^[,A ^[(B ^[,A ^[(B0.978792] Monitor-Mwait will be used to enter C-1 state >> > [ ^[,A ^[(B ^[,A ^[(B0.978888] Monitor-Mwait will be used to enter C-2 state >> > [ ^[,A ^[(B ^[,A ^[(B0.978969] Monitor-Mwait will be used to enter C-3 state >> > [ ^[,A ^[(B ^[,A ^[(B0.978985] Marking TSC unstable due to TSC halts in idle >> > [ ^[,A ^[(B ^[,A ^[(B0.979117] Switching to clocksource hpet >> > [ ^[,A ^[(B ^[,A ^[(B0.980233] processor LNXCPU:00: registered as cooling_device0 >> > [ ^[,A ^[(B ^[,A ^[(B0.981727] ACPI: SSDT 3d390c16 001D7 (v01 ^[,A ^[(BPmRef ^[,A ^[(B ^[,A ^[(BApIst 00003000 >> > INTL 20050624) >> > [ ^[,A ^[(B ^[,A ^[(B0.984297] ACPI: SSDT 3d3913b3 0008D (v01 ^[,A ^[(BPmRef ^[,A ^[(B ^[,A ^[(BApCst 00003000 >> > INTL 20050624) >> > [ ^[,A ^[(B ^[,A ^[(B0.987470] processor LNXCPU:01: registered as cooling_device1 >> > [ ^[,A ^[(B ^[,A ^[(B1.036564] thermal LNXTHERM:01: registered as thermal_zone0 >> > [ ^[,A ^[(B ^[,A ^[(B1.036744] ACPI: Thermal Zone [THM] (50 C) >> > [ ^[,A ^[(B ^[,A ^[(B1.057169] Non-volatile memory driver v1.3 >> > [ ^[,A ^[(B ^[,A ^[(B1.058010] i8k: unable to get SMM BIOS version >> > [ ^[,A ^[(B ^[,A ^[(B1.058127] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal >> > Zotto (dz@debian.org) >> > [ ^[,A ^[(B ^[,A ^[(B1.058728] Linux agpgart interface v0.103 >> > [ ^[,A ^[(B ^[,A ^[(B1.059781] agpgart-intel 0000:00:00.0: Intel Mobile Intel^[$(D"n^[(B GM45 >> > Express Chipset >> > [ ^[,A ^[(B ^[,A ^[(B1.066202] agpgart-intel 0000:00:00.0: detected 32764K stolen memory >> > [ ^[,A ^[(B ^[,A ^[(B1.075474] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 >> > [ ^[,A ^[(B ^[,A ^[(B1.081183] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 >> > seconds, margin is 60 seconds). >> > [ ^[,A ^[(B ^[,A ^[(B1.086768] Hangcheck: Using get_cycles(). >> > [ ^[,A ^[(B ^[,A ^[(B1.092487] [drm] Initialized drm 1.1.0 20060810 >> > [ ^[,A ^[(B ^[,A ^[(B1.098041] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> > [ ^[,A ^[(B ^[,A ^[(B1.103610] i915 0000:00:02.0: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B1.109032] mtrr: type mismatch for e0000000,10000000 old: >> > write-back new: write-combining >> > [ ^[,A ^[(B ^[,A ^[(B1.114711] [drm] MTRR allocation failed. ^[,A ^[(BGraphics performance may suffer. >> > [ ^[,A ^[(B ^[,A ^[(B1.120525] i915 0000:00:02.0: irq 27 for MSI/MSI-X >> > [ ^[,A ^[(B ^[,A ^[(B1.120541] [drm] set up 31M of stolen space >> > [ ^[,A ^[(B ^[,A ^[(B1.173585] ACPI: Battery Slot [BAT0] (battery present) >> > [ ^[,A ^[(B ^[,A ^[(B1.743361] [drm] TV-21: set mode NTSC 480i 0 >> > [ ^[,A ^[(B ^[,A ^[(B1.917419] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - >> > removing generic driver >> > [ ^[,A ^[(B ^[,A ^[(B1.923290] Console: switching to colour dummy device 80x25 >> > [ ^[,A ^[(B ^[,A ^[(B1.993413] [drm] LVDS-8: set mode 1280x800 c >> > [ ^[,A ^[(B ^[,A ^[(B2.180028] async/0 used greatest stack depth: 6240 bytes left >> > [ ^[,A ^[(B ^[,A ^[(B2.311701] Console: switching to colour frame buffer device 160x50 >> > [ ^[,A ^[(B ^[,A ^[(B2.344161] fb0: inteldrmfb frame buffer device >> > [ ^[,A ^[(B ^[,A ^[(B2.344163] registered panic notifier >> > [ ^[,A ^[(B ^[,A ^[(B2.381263] acpi device:3b: registered as cooling_device2 >> > [ ^[,A ^[(B ^[,A ^[(B2.383064] input: Video Bus as >> > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input3 >> > [ ^[,A ^[(B ^[,A ^[(B2.383507] ACPI: Video Device [VID1] (multi-head: yes ^[,A ^[(Brom: no ^[,A ^[(Bpost: no) >> > [ ^[,A ^[(B ^[,A ^[(B2.383961] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package >> > has no elements (empty) (20091112/nspredef-439) >> > [ ^[,A ^[(B ^[,A ^[(B2.384794] input: Video Bus as >> > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input4 >> > [ ^[,A ^[(B ^[,A ^[(B2.385220] ACPI: Video Device [VID2] (multi-head: yes ^[,A ^[(Brom: no ^[,A ^[(Bpost: no) >> > [ ^[,A ^[(B ^[,A ^[(B2.385736] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 >> > [ ^[,A ^[(B ^[,A ^[(B2.386291] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled >> > [ ^[,A ^[(B ^[,A ^[(B2.397666] brd: module loaded >> > [ ^[,A ^[(B ^[,A ^[(B2.402531] loop: module loaded >> > [ ^[,A ^[(B ^[,A ^[(B2.403545] Loading iSCSI transport class v2.0-870. >> > [ ^[,A ^[(B ^[,A ^[(B2.405776] ata_piix 0000:00:1f.2: version 2.13 >> > [ ^[,A ^[(B ^[,A ^[(B2.405803] ata_piix 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 >> > [ ^[,A ^[(B ^[,A ^[(B2.406147] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] >> > [ ^[,A ^[(B ^[,A ^[(B2.406810] ata_piix 0000:00:1f.2: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B2.406998] scsi0 : ata_piix >> > [ ^[,A ^[(B ^[,A ^[(B2.407806] scsi1 : ata_piix >> > [ ^[,A ^[(B ^[,A ^[(B2.410373] ata1: SATA max UDMA/133 cmd 0x6e70 ctl 0x6e78 bmdma 0x6ea0 irq 19 >> > [ ^[,A ^[(B ^[,A ^[(B2.410705] ata2: SATA max UDMA/133 cmd 0x6e80 ctl 0x6e88 bmdma 0x6ea8 irq 19 >> > [ ^[,A ^[(B ^[,A ^[(B2.411165] ata_piix 0000:00:1f.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 >> > [ ^[,A ^[(B ^[,A ^[(B2.411501] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] >> > [ ^[,A ^[(B ^[,A ^[(B2.563394] ata_piix 0000:00:1f.5: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B2.563493] scsi2 : ata_piix >> > [ ^[,A ^[(B ^[,A ^[(B2.564121] scsi3 : ata_piix >> > [ ^[,A ^[(B ^[,A ^[(B2.575834] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 19 >> > [ ^[,A ^[(B ^[,A ^[(B2.586887] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 19 >> > [ ^[,A ^[(B ^[,A ^[(B2.600548] tg3.c:v3.105 (December 2, 2009) >> > [ ^[,A ^[(B ^[,A ^[(B2.611593] tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> > [ ^[,A ^[(B ^[,A ^[(B2.622751] tg3 0000:09:00.0: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B2.638698] eth0: Tigon3 [partno(BCM95756m) rev a200] (PCI Express) >> > MAC address 00:21:9b:f5:60:0f >> > [ ^[,A ^[(B ^[,A ^[(B2.650064] eth0: attached PHY is 5722/5756 (10/100/1000Base-T >> > Ethernet) (WireSpeed[1]) >> > [ ^[,A ^[(B ^[,A ^[(B2.661533] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] >> > [ ^[,A ^[(B ^[,A ^[(B2.673063] eth0: dma_rwctrl[76180000] dma_mask[64-bit] >> > [ ^[,A ^[(B ^[,A ^[(B2.684889] sky2 driver version 1.26 >> > [ ^[,A ^[(B ^[,A ^[(B2.696408] PPP generic driver version 2.4.2 >> > [ ^[,A ^[(B ^[,A ^[(B2.708158] PPP Deflate Compression module registered >> > [ ^[,A ^[(B ^[,A ^[(B2.719445] PPP BSD Compression module registered >> > [ ^[,A ^[(B ^[,A ^[(B2.731444] PPP MPPE Compression module registered >> > [ ^[,A ^[(B ^[,A ^[(B2.742638] NET: Registered protocol family 24 >> > [ ^[,A ^[(B ^[,A ^[(B2.753770] PPPoL2TP kernel driver, V1.0 >> > [ ^[,A ^[(B ^[,A ^[(B2.764836] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, >> > max=256) (6 bit encapsulation enabled). >> > [ ^[,A ^[(B ^[,A ^[(B2.776283] CSLIP: code copyright 1989 Regents of the University of >> > California. >> > [ ^[,A ^[(B ^[,A ^[(B2.787734] SLIP linefill/keepalive option. >> > [ ^[,A ^[(B ^[,A ^[(B2.799316] console [netcon0] enabled >> > [ ^[,A ^[(B ^[,A ^[(B2.810537] netconsole: network logging started >> > [ ^[,A ^[(B ^[,A ^[(B2.822002] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >> > [ ^[,A ^[(B ^[,A ^[(B2.833433] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 >> > [ ^[,A ^[(B ^[,A ^[(B2.844842] ehci_hcd 0000:00:1a.7: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B2.844848] ehci_hcd 0000:00:1a.7: EHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B2.856214] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned >> > bus number 1 >> > [ ^[,A ^[(B ^[,A ^[(B2.867638] ehci_hcd 0000:00:1a.7: debug port 1 >> > [ ^[,A ^[(B ^[,A ^[(B2.882679] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported >> > [ ^[,A ^[(B ^[,A ^[(B2.882717] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 >> > [ ^[,A ^[(B ^[,A ^[(B2.894255] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> > [ ^[,A ^[(B ^[,A ^[(B2.905663] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> > [ ^[,A ^[(B ^[,A ^[(B2.906708] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 >> > [ ^[,A ^[(B ^[,A ^[(B2.906949] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 >> > [ ^[,A ^[(B ^[,A ^[(B2.906952] usb usb1: New USB device strings: Mfr=3, Product=2, >> > SerialNumber=1 >> > [ ^[,A ^[(B ^[,A ^[(B2.906955] usb usb1: Product: EHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B2.906958] usb usb1: Manufacturer: Linux 2.6.32-mm1 ehci_hcd >> > [ ^[,A ^[(B ^[,A ^[(B2.906960] usb usb1: SerialNumber: 0000:00:1a.7 >> > [ ^[,A ^[(B ^[,A ^[(B2.908100] hub 1-0:1.0: USB hub found >> > [ ^[,A ^[(B ^[,A ^[(B2.908116] hub 1-0:1.0: 6 ports detected >> > [ ^[,A ^[(B ^[,A ^[(B2.908556] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >> > [ ^[,A ^[(B ^[,A ^[(B2.908581] ehci_hcd 0000:00:1d.7: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B2.908585] ehci_hcd 0000:00:1d.7: EHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B2.908603] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned >> > bus number 2 >> > [ ^[,A ^[(B ^[,A ^[(B2.908679] ehci_hcd 0000:00:1d.7: debug port 1 >> > [ ^[,A ^[(B ^[,A ^[(B2.912557] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported >> > [ ^[,A ^[(B ^[,A ^[(B2.912592] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 >> > [ ^[,A ^[(B ^[,A ^[(B2.934701] ata3: SATA link down (SStatus 0 SControl 300) >> > [ ^[,A ^[(B ^[,A ^[(B2.946085] ata4: SATA link down (SStatus 4 SControl 300) >> > [ ^[,A ^[(B ^[,A ^[(B2.946126] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 >> > [ ^[,A ^[(B ^[,A ^[(B2.946207] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 >> > [ ^[,A ^[(B ^[,A ^[(B2.946210] usb usb2: New USB device strings: Mfr=3, Product=2, >> > SerialNumber=1 >> > [ ^[,A ^[(B ^[,A ^[(B2.946212] usb usb2: Product: EHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B2.946215] usb usb2: Manufacturer: Linux 2.6.32-mm1 ehci_hcd >> > [ ^[,A ^[(B ^[,A ^[(B2.946217] usb usb2: SerialNumber: 0000:00:1d.7 >> > [ ^[,A ^[(B ^[,A ^[(B2.946808] hub 2-0:1.0: USB hub found >> > [ ^[,A ^[(B ^[,A ^[(B2.946831] hub 2-0:1.0: 6 ports detected >> > [ ^[,A ^[(B ^[,A ^[(B2.947216] uhci_hcd: USB Universal Host Controller Interface driver >> > [ ^[,A ^[(B ^[,A ^[(B3.159489] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >> > [ ^[,A ^[(B ^[,A ^[(B3.160208] ata1.00: ATA-8: ST9160310AS, DE04, max UDMA/133 >> > [ ^[,A ^[(B ^[,A ^[(B3.160212] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32) >> > [ ^[,A ^[(B ^[,A ^[(B3.189480] uhci_hcd 0000:00:1a.0: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B3.189485] uhci_hcd 0000:00:1a.0: UHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B3.191391] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633A, D500, max UDMA/100 >> > [ ^[,A ^[(B ^[,A ^[(B3.191405] ata2.00: applying bridge limits >> > [ ^[,A ^[(B ^[,A ^[(B3.219002] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned >> > bus number 3 >> > [ ^[,A ^[(B ^[,A ^[(B3.229172] ata1.00: configured for UDMA/133 >> > [ ^[,A ^[(B ^[,A ^[(B3.229191] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60 >> > [ ^[,A ^[(B ^[,A ^[(B3.229343] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 >> > [ ^[,A ^[(B ^[,A ^[(B3.229347] usb usb3: New USB device strings: Mfr=3, Product=2, >> > SerialNumber=1 >> > [ ^[,A ^[(B ^[,A ^[(B3.229349] usb usb3: Product: UHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B3.229351] usb usb3: Manufacturer: Linux 2.6.32-mm1 uhci_hcd >> > [ ^[,A ^[(B ^[,A ^[(B3.229354] usb usb3: SerialNumber: 0000:00:1a.0 >> > [ ^[,A ^[(B ^[,A ^[(B3.229946] hub 3-0:1.0: USB hub found >> > [ ^[,A ^[(B ^[,A ^[(B3.230036] hub 3-0:1.0: 2 ports detected >> > [ ^[,A ^[(B ^[,A ^[(B3.230281] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 >> > [ ^[,A ^[(B ^[,A ^[(B3.230296] uhci_hcd 0000:00:1a.1: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B3.230301] uhci_hcd 0000:00:1a.1: UHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B3.230323] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned >> > bus number 4 >> > [ ^[,A ^[(B ^[,A ^[(B3.230400] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80 >> > [ ^[,A ^[(B ^[,A ^[(B3.230538] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 >> > [ ^[,A ^[(B ^[,A ^[(B3.230541] usb usb4: New USB device strings: Mfr=3, Product=2, >> > SerialNumber=1 >> > [ ^[,A ^[(B ^[,A ^[(B3.230544] usb usb4: Product: UHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B3.230546] usb usb4: Manufacturer: Linux 2.6.32-mm1 uhci_hcd >> > [ ^[,A ^[(B ^[,A ^[(B3.230549] usb usb4: SerialNumber: 0000:00:1a.1 >> > [ ^[,A ^[(B ^[,A ^[(B3.231135] hub 4-0:1.0: USB hub found >> > [ ^[,A ^[(B ^[,A ^[(B3.231150] hub 4-0:1.0: 2 ports detected >> > [ ^[,A ^[(B ^[,A ^[(B3.231310] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 >> > [ ^[,A ^[(B ^[,A ^[(B3.231324] uhci_hcd 0000:00:1a.2: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B3.231329] uhci_hcd 0000:00:1a.2: UHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B3.231346] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned >> > bus number 5 >> > [ ^[,A ^[(B ^[,A ^[(B3.231393] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0 >> > [ ^[,A ^[(B ^[,A ^[(B3.231521] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 >> > [ ^[,A ^[(B ^[,A ^[(B3.231524] usb usb5: New USB device strings: Mfr=3, Product=2, >> > SerialNumber=1 >> > [ ^[,A ^[(B ^[,A ^[(B3.231526] usb usb5: Product: UHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B3.231529] usb usb5: Manufacturer: Linux 2.6.32-mm1 uhci_hcd >> > [ ^[,A ^[(B ^[,A ^[(B3.231531] usb usb5: SerialNumber: 0000:00:1a.2 >> > [ ^[,A ^[(B ^[,A ^[(B3.232101] hub 5-0:1.0: USB hub found >> > [ ^[,A ^[(B ^[,A ^[(B3.232121] hub 5-0:1.0: 2 ports detected >> > [ ^[,A ^[(B ^[,A ^[(B3.232287] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >> > [ ^[,A ^[(B ^[,A ^[(B3.232302] uhci_hcd 0000:00:1d.0: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B3.232306] uhci_hcd 0000:00:1d.0: UHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B3.232323] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned >> > bus number 6 >> > [ ^[,A ^[(B ^[,A ^[(B3.232370] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00 >> > [ ^[,A ^[(B ^[,A ^[(B3.232504] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 >> > [ ^[,A ^[(B ^[,A ^[(B3.232507] usb usb6: New USB device strings: Mfr=3, Product=2, >> > SerialNumber=1 >> > [ ^[,A ^[(B ^[,A ^[(B3.232510] usb usb6: Product: UHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B3.232512] usb usb6: Manufacturer: Linux 2.6.32-mm1 uhci_hcd >> > [ ^[,A ^[(B ^[,A ^[(B3.232514] usb usb6: SerialNumber: 0000:00:1d.0 >> > [ ^[,A ^[(B ^[,A ^[(B3.233084] hub 6-0:1.0: USB hub found >> > [ ^[,A ^[(B ^[,A ^[(B3.233100] hub 6-0:1.0: 2 ports detected >> > [ ^[,A ^[(B ^[,A ^[(B3.233273] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 >> > [ ^[,A ^[(B ^[,A ^[(B3.233287] uhci_hcd 0000:00:1d.1: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B3.233292] uhci_hcd 0000:00:1d.1: UHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B3.233310] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned >> > bus number 7 >> > [ ^[,A ^[(B ^[,A ^[(B3.233380] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20 >> > [ ^[,A ^[(B ^[,A ^[(B3.233513] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 >> > [ ^[,A ^[(B ^[,A ^[(B3.233516] usb usb7: New USB device strings: Mfr=3, Product=2, >> > SerialNumber=1 >> > [ ^[,A ^[(B ^[,A ^[(B3.233518] usb usb7: Product: UHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B3.233521] usb usb7: Manufacturer: Linux 2.6.32-mm1 uhci_hcd >> > [ ^[,A ^[(B ^[,A ^[(B3.233523] usb usb7: SerialNumber: 0000:00:1d.1 >> > [ ^[,A ^[(B ^[,A ^[(B3.234086] hub 7-0:1.0: USB hub found >> > [ ^[,A ^[(B ^[,A ^[(B3.234101] hub 7-0:1.0: 2 ports detected >> > [ ^[,A ^[(B ^[,A ^[(B3.234263] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 >> > [ ^[,A ^[(B ^[,A ^[(B3.234277] uhci_hcd 0000:00:1d.2: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B3.234282] uhci_hcd 0000:00:1d.2: UHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B3.234299] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned >> > bus number 8 >> > [ ^[,A ^[(B ^[,A ^[(B3.234347] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 >> > [ ^[,A ^[(B ^[,A ^[(B3.234480] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 >> > [ ^[,A ^[(B ^[,A ^[(B3.234483] usb usb8: New USB device strings: Mfr=3, Product=2, >> > SerialNumber=1 >> > [ ^[,A ^[(B ^[,A ^[(B3.234486] usb usb8: Product: UHCI Host Controller >> > [ ^[,A ^[(B ^[,A ^[(B3.234488] usb usb8: Manufacturer: Linux 2.6.32-mm1 uhci_hcd >> > [ ^[,A ^[(B ^[,A ^[(B3.234490] usb usb8: SerialNumber: 0000:00:1d.2 >> > [ ^[,A ^[(B ^[,A ^[(B3.235059] hub 8-0:1.0: USB hub found >> > [ ^[,A ^[(B ^[,A ^[(B3.235082] hub 8-0:1.0: 2 ports detected >> > [ ^[,A ^[(B ^[,A ^[(B3.235437] Initializing USB Mass Storage driver... >> > [ ^[,A ^[(B ^[,A ^[(B3.235668] usbcore: registered new interface driver usb-storage >> > [ ^[,A ^[(B ^[,A ^[(B3.235673] USB Mass Storage support registered. >> > [ ^[,A ^[(B ^[,A ^[(B3.236109] usbcore: registered new interface driver libusual >> > [ ^[,A ^[(B ^[,A ^[(B3.236534] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at >> > 0x60,0x64 irq 1,12 >> > [ ^[,A ^[(B ^[,A ^[(B3.237387] i8042.c: Warning: Keylock active. >> > [ ^[,A ^[(B ^[,A ^[(B3.240564] serio: i8042 KBD port at 0x60,0x64 irq 1 >> > [ ^[,A ^[(B ^[,A ^[(B3.240605] serio: i8042 AUX port at 0x60,0x64 irq 12 >> > [ ^[,A ^[(B ^[,A ^[(B3.241694] mice: PS/2 mouse device common for all mice >> > [ ^[,A ^[(B ^[,A ^[(B3.243828] Driver 'rtc_cmos' needs updating - please use bus_type methods >> > [ ^[,A ^[(B ^[,A ^[(B3.243873] rtc_cmos 00:03: RTC can wake from S4 >> > [ ^[,A ^[(B ^[,A ^[(B3.244268] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 >> > [ ^[,A ^[(B ^[,A ^[(B3.244314] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs >> > [ ^[,A ^[(B ^[,A ^[(B3.244498] i2c /dev entries driver >> > [ ^[,A ^[(B ^[,A ^[(B3.246702] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, >> > low) -> IRQ 19 >> > [ ^[,A ^[(B ^[,A ^[(B3.982537] ata2.00: configured for UDMA/100 >> > [ ^[,A ^[(B ^[,A ^[(B3.983129] scsi 0:0:0:0: Direct-Access ^[,A ^[(B ^[,A ^[(B ATA ^[,A ^[(B ^[,A ^[(B ^[,A ^[(BST9160310AS >> > ^[,A ^[(BDE04 PQ: 0 ANSI: 5 >> > [ ^[,A ^[(B ^[,A ^[(B3.984407] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04 >> > [ ^[,A ^[(B ^[,A ^[(B3.985019] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: >> > (160 GB/149 GiB) >> > [ ^[,A ^[(B ^[,A ^[(B3.985213] sd 0:0:0:0: [sda] Write Protect is off >> > [ ^[,A ^[(B ^[,A ^[(B3.985217] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> > [ ^[,A ^[(B ^[,A ^[(B3.985296] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >> > enabled, doesn't support DPO or FUA >> > [ ^[,A ^[(B ^[,A ^[(B3.986007] ^[,A ^[(Bsda: >> > [ ^[,A ^[(B ^[,A ^[(B3.987294] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 >> > [ ^[,A ^[(B ^[,A ^[(B3.987559] sd 0:0:0:0: Attached scsi generic sg0 type 0 >> > [ ^[,A ^[(B ^[,A ^[(B3.988645] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060) >> > [ ^[,A ^[(B ^[,A ^[(B3.988921] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) >> > [ ^[,A ^[(B ^[,A ^[(B3.988927] iTCO_vendor_support: vendor-support=0 >> > [ ^[,A ^[(B ^[,A ^[(B4.103269] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) >> > initialised: dm-devel@redhat.com >> > [ ^[,A ^[(B ^[,A ^[(B4.114089] device-mapper: dm-log-userspace: version 1.0.0 loaded >> > [ ^[,A ^[(B ^[,A ^[(B4.115717] scsi 1:0:0:0: CD-ROM ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(B ^[,A ^[(BTSSTcorp DVD+-RW >> > TS-L633A D500 PQ: 0 ANSI: 5 >> > [ ^[,A ^[(B ^[,A ^[(B4.136170] input: AT Translated Set 2 keyboard as >> > /devices/platform/i8042/serio0/input/input5 >> > [ ^[,A ^[(B ^[,A ^[(B4.137513] cpuidle: using governor ladder >> > [ ^[,A ^[(B ^[,A ^[(B4.160918] cpuidle: using governor menu >> > [ ^[,A ^[(B ^[,A ^[(B4.172702] sdhci: Secure Digital Host Controller Interface driver >> > [ ^[,A ^[(B ^[,A ^[(B4.183721] sdhci: Copyright(c) Pierre Ossman >> > [ ^[,A ^[(B ^[,A ^[(B4.187247] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw >> > xa/form2 cdda tray >> > [ ^[,A ^[(B ^[,A ^[(B4.187251] Uniform CD-ROM driver Revision: 3.20 >> > [ ^[,A ^[(B ^[,A ^[(B4.188050] sr 1:0:0:0: Attached scsi CD-ROM sr0 >> > [ ^[,A ^[(B ^[,A ^[(B4.188595] sr 1:0:0:0: Attached scsi generic sg1 type 5 >> > [ ^[,A ^[(B ^[,A ^[(B4.228490] dcdbas dcdbas: Dell Systems Management Base Driver >> > (version 5.6.0-3.2) >> > [ ^[,A ^[(B ^[,A ^[(B4.244671] ^[,A ^[(Bsda1 sda2 sda3 sda4 < >> > [ ^[,A ^[(B ^[,A ^[(B4.246859] usbcore: registered new interface driver hiddev >> > [ ^[,A ^[(B ^[,A ^[(B4.269823] usbcore: registered new interface driver usbhid >> > [ ^[,A ^[(B ^[,A ^[(B4.281086] usbhid: USB HID core driver >> > [ ^[,A ^[(B ^[,A ^[(B4.292291] ^[,A ^[(Bsda5 >> > [ ^[,A ^[(B ^[,A ^[(B4.292837] Advanced Linux Sound Architecture Driver Version 1.0.21. >> > [ ^[,A ^[(B ^[,A ^[(B4.314873] ALSA device list: >> > [ ^[,A ^[(B ^[,A ^[(B4.325942] ^[,A ^[(B No soundcards found. >> > [ ^[,A ^[(B ^[,A ^[(B4.336996] Netfilter messages via NETLINK v0.30. >> > [ ^[,A ^[(B ^[,A ^[(B4.348290] ^[,A ^[(Bsda6nf_conntrack version 0.5.0 (15334 buckets, 61336 max) >> > [ ^[,A ^[(B ^[,A ^[(B4.360287] ctnetlink v0.93: registering with nfnetlink. >> > [ ^[,A ^[(B ^[,A ^[(B4.374177] ip_tables: (C) 2000-2006 Netfilter Core Team >> > [ ^[,A ^[(B ^[,A ^[(B4.385662] TCP cubic registered >> > [ ^[,A ^[(B ^[,A ^[(B4.396917] NET: Registered protocol family 17 >> > [ ^[,A ^[(B ^[,A ^[(B4.408204] lib80211: common routines for IEEE802.11 drivers >> > [ ^[,A ^[(B ^[,A ^[(B4.419455] lib80211_crypt: registered algorithm 'NULL' >> > [ ^[,A ^[(B ^[,A ^[(B4.421640] ^[,A ^[(Bsda7 >> > [ ^[,A ^[(B ^[,A ^[(B4.422604] Using IPI No-Shortcut mode >> > [ ^[,A ^[(B ^[,A ^[(B4.444566] ^[,A ^[(Bsda8 > >> > [ ^[,A ^[(B ^[,A ^[(B4.457176] PM: Checking image partition /dev/sda8 >> > [ ^[,A ^[(B ^[,A ^[(B4.457222] PM: Resume from partition 8:8 >> > [ ^[,A ^[(B ^[,A ^[(B4.457225] PM: Checking hibernation image. >> > [ ^[,A ^[(B ^[,A ^[(B4.457992] PM: Error -22 checking image file >> > [ ^[,A ^[(B ^[,A ^[(B4.457994] PM: Resume from disk failed. >> > [ ^[,A ^[(B ^[,A ^[(B4.458061] registered taskstats version 1 >> > [ ^[,A ^[(B ^[,A ^[(B4.460011] sd 0:0:0:0: [sda] Attached SCSI disk >> > [ ^[,A ^[(B ^[,A ^[(B4.481540] ^[,A ^[(B Magic number: 5:855:537 >> > [ ^[,A ^[(B ^[,A ^[(B4.492483] bdi 1:15: hash matches >> > [ ^[,A ^[(B ^[,A ^[(B4.503405] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found >> > [ ^[,A ^[(B ^[,A ^[(B4.650495] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 >> > [ ^[,A ^[(B ^[,A ^[(B4.692892] input: AlpsPS/2 ALPS GlidePoint as >> > /devices/platform/i8042/serio1/input/input7 >> > [ ^[,A ^[(B ^[,A ^[(B4.720082] md: Waiting for all devices to be available before autodetect >> > [ ^[,A ^[(B ^[,A ^[(B4.742549] md: If you don't use raid, use raid=noautodetect >> > [ ^[,A ^[(B ^[,A ^[(B4.767844] md: Autodetecting RAID arrays. >> > [ ^[,A ^[(B ^[,A ^[(B4.778687] md: Scanned 0 and added 0 devices. >> > [ ^[,A ^[(B ^[,A ^[(B4.789416] md: autorun ... >> > [ ^[,A ^[(B ^[,A ^[(B4.800012] md: ... autorun DONE. >> > [ ^[,A ^[(B ^[,A ^[(B5.003501] Clocksource tsc unstable (delta = -321604132 ns) >> > [ ^[,A ^[(B ^[,A ^[(B5.079096] kjournald starting. ^[,A ^[(BCommit interval 5 seconds >> > [ ^[,A ^[(B ^[,A ^[(B5.079824] EXT3-fs (sda2): mounted filesystem with writeback data mode >> > [ ^[,A ^[(B ^[,A ^[(B5.080120] VFS: Mounted root (ext3 filesystem) readonly on device 8:2. >> > [ ^[,A ^[(B ^[,A ^[(B5.142808] Freeing unused kernel memory: 408k freed >> > [ ^[,A ^[(B ^[,A ^[(B5.165214] Write protecting the kernel text: 3908k >> > [ ^[,A ^[(B ^[,A ^[(B5.186530] async/1 used greatest stack depth: 6064 bytes left >> > [ ^[,A ^[(B ^[,A ^[(B5.196969] Write protecting the kernel read-only data: 2088k >> > [ ^[,A ^[(B ^[,A ^[(B6.333570] mount used greatest stack depth: 6040 bytes left >> > [ ^[,A ^[(B ^[,A ^[(B6.951249] udevd used greatest stack depth: 5952 bytes left >> > [ ^[,A ^[(B ^[,A ^[(B7.234948] modprobe used greatest stack depth: 5828 bytes left >> > [ ^[,A ^[(B ^[,A ^[(B7.651236] cfg80211: Using static regulatory domain info >> > [ ^[,A ^[(B ^[,A ^[(B7.661764] cfg80211: Regulatory domain: US >> > [ ^[,A ^[(B ^[,A ^[(B7.671985] ^[,A ^[(B ^[,A ^[(B (start_freq - end_freq @ bandwidth), >> > (max_antenna_gain, max_eirp) >> > [ ^[,A ^[(B ^[,A ^[(B7.682267] ^[,A ^[(B ^[,A ^[(B (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) >> > [ ^[,A ^[(B ^[,A ^[(B7.692698] ^[,A ^[(B ^[,A ^[(B (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) >> > [ ^[,A ^[(B ^[,A ^[(B7.703043] ^[,A ^[(B ^[,A ^[(B (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) >> > [ ^[,A ^[(B ^[,A ^[(B7.713325] ^[,A ^[(B ^[,A ^[(B (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) >> > [ ^[,A ^[(B ^[,A ^[(B7.723694] ^[,A ^[(B ^[,A ^[(B (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) >> > [ ^[,A ^[(B ^[,A ^[(B7.733671] ^[,A ^[(B ^[,A ^[(B (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) >> > [ ^[,A ^[(B ^[,A ^[(B7.771924] sdhci-pci 0000:02:01.2: SDHCI controller found >> > [1180:0822] (rev 21) >> > [ ^[,A ^[(B ^[,A ^[(B7.781951] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, >> > low) -> IRQ 18 >> > [ ^[,A ^[(B ^[,A ^[(B7.794964] ACPI: WMI: Mapper loaded >> > [ ^[,A ^[(B ^[,A ^[(B7.879419] Registered led device: mmc0:: >> > [ ^[,A ^[(B ^[,A ^[(B7.944622] mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA >> > [ ^[,A ^[(B ^[,A ^[(B7.966785] mmc0: Minimum clock frequency too high for identification mode >> > [ ^[,A ^[(B ^[,A ^[(B7.997256] ohci1394 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >> > [ ^[,A ^[(B ^[,A ^[(B8.016459] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, >> > low) -> IRQ 21 >> > [ ^[,A ^[(B ^[,A ^[(B8.036194] cfg80211: Calling CRDA for country: US >> > [ ^[,A ^[(B ^[,A ^[(B8.069726] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] >> > MMIO=[f67ff800-f67fffff] ^[,A ^[(BMax Packet=[2048] ^[,A ^[(BIR/IT contexts=[4/4] >> > [ ^[,A ^[(B ^[,A ^[(B8.080275] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X >> > [ ^[,A ^[(B ^[,A ^[(B8.080357] HDA Intel 0000:00:1b.0: setting latency timer to 64 >> > [ ^[,A ^[(B ^[,A ^[(B8.512355] input: Dell WMI hotkeys as /devices/virtual/input/input8 >> > [ ^[,A ^[(B ^[,A ^[(B9.389757] ieee1394: Host added: ID:BUS[0-00:1023] ^[,A ^[(BGUID[464fc0001679c05c] >> > [ ^[,A ^[(B ^[,A ^[(B9.532991] b43-phy0: Broadcom 4312 WLAN found (core revision 15) >> > [ ^[,A ^[(B ^[,A ^[(B9.580380] b43-phy0 debug: Found PHY: Analog 6, Type 5, Revision 1 >> > [ ^[,A ^[(B ^[,A ^[(B9.580405] b43-phy0 debug: Found Radio: Manuf 0x17F, Version >> > 0x2062, Revision 2 >> > [ ^[,A ^[(B ^[,A ^[(B9.604678] phy0: Selected rate control algorithm 'minstrel' >> > [ ^[,A ^[(B ^[,A ^[(B9.608519] Registered led device: b43-phy0::tx >> > [ ^[,A ^[(B ^[,A ^[(B9.630314] Registered led device: b43-phy0::rx >> > [ ^[,A ^[(B ^[,A ^[(B9.651887] Registered led device: b43-phy0::radio >> > [ ^[,A ^[(B ^[,A ^[(B9.662725] Broadcom 43xx driver loaded [ Features: PLS, Firmware-ID: FW13 ] >> > [ ^[,A ^[(B 10.307938] Adding 2008084k swap on /dev/sda8. ^[,A ^[(BPriority:-1 >> > extents:1 across:2008084k >> > [ ^[,A ^[(B 12.595365] EXT3-fs (sda2): using internal journal >> > [ ^[,A ^[(B 17.969618] kjournald starting. ^[,A ^[(BCommit interval 5 seconds >> > [ ^[,A ^[(B 17.991570] EXT3-fs (sda3): using internal journal >> > [ ^[,A ^[(B 18.013380] EXT3-fs (sda3): mounted filesystem with writeback data mode >> > [ ^[,A ^[(B 18.237351] modprobe used greatest stack depth: 5816 bytes left >> > [ ^[,A ^[(B 18.299750] REISERFS (device sda5): found reiserfs format "3.6" >> > with standard journal >> > [ ^[,A ^[(B 18.322229] REISERFS warning (device sda5): ^[,A ^[(Breiserfs_fill_super: >> > CONFIG_REISERFS_CHECK is set ON >> > [ ^[,A ^[(B 18.344705] REISERFS warning (device sda5): ^[,A ^[(Breiserfs_fill_super: - >> > it is slow mode for debugging. >> > [ ^[,A ^[(B 18.366916] REISERFS (device sda5): using ordered data mode >> > [ ^[,A ^[(B 18.402628] REISERFS (device sda5): journal params: device sda5, >> > size 8192, journal first block 18, max trans len 1024, max batch 900, >> > max commit age 30, max trans age 30 >> > [ ^[,A ^[(B 18.425822] REISERFS (device sda5): checking transaction log (sda5) >> > [ ^[,A ^[(B 18.437324] REISERFS debug (device sda5): journal-1153: found in >> > header: first_unflushed_offset 1203, last_flushed_trans_id 124057 >> > [ ^[,A ^[(B 18.441500] REISERFS debug (device sda5): journal-1006: found valid >> > transaction start offset 4294968499, len 121333 id 4096 >> > [ ^[,A ^[(B 18.441510] REISERFS debug (device sda5): journal-1206: Starting >> > replay from offset 532825052808371, trans_id 2823643143 >> > [ ^[,A ^[(B 18.441519] REISERFS debug (device sda5): journal-1037: >> > journal_read_transaction, offset 4294968499, len 359 mount_id >> > -1471324153 >> > [ ^[,A ^[(B 18.441527] REISERFS debug (device sda5): journal-1039: >> > journal_read_trans skipping because 1203 is too old >> > [ ^[,A ^[(B 18.441534] REISERFS debug (device sda5): journal-1299: Setting >> > newest_mount_id to 457 >> > [ ^[,A ^[(B 18.465006] REISERFS (device sda5): Using r5 hash to sort names >> > [ ^[,A ^[(B 18.517772] mount used greatest stack depth: 5740 bytes left >> > [ ^[,A ^[(B 19.151072] rc.S used greatest stack depth: 5424 bytes left >> > [ ^[,A ^[(B 27.284345] smbd used greatest stack depth: 5296 bytes left >> > [ ^[,A ^[(B224.256014] PM: Syncing filesystems ... done. >> > [ ^[,A ^[(B224.295550] PM: Preparing system for mem sleep >> > [ ^[,A ^[(B224.295734] Freezing user space processes ... (elapsed 0.01 seconds) done. >> > [ ^[,A ^[(B224.306948] Freezing remaining freezable tasks ... (elapsed 0.01 >> > seconds) done. >> > [ ^[,A ^[(B224.320225] PM: Entering mem sleep >> > [ ^[,A ^[(B224.320350] Suspending console(s) (use no_console_suspend to debug) >> > [ ^[,A ^[(B224.335095] sd 0:0:0:0: [sda] Synchronizing SCSI cache >> > [ ^[,A ^[(B224.538141] sd 0:0:0:0: [sda] Stopping disk >> > [ ^[,A ^[(B225.379324] ACPI handle has no context! >> > [ ^[,A ^[(B225.379364] sdhci-pci 0000:02:01.2: PCI INT C disabled >> > [ ^[,A ^[(B225.379374] ACPI handle has no context! >> > [ ^[,A ^[(B225.395501] ACPI handle has no context! >> > [ ^[,A ^[(B225.407487] b43-pci-bridge 0000:0c:00.0: PCI INT A disabled >> > [ ^[,A ^[(B225.420718] ata_piix 0000:00:1f.5: PCI INT D disabled >> > [ ^[,A ^[(B225.433838] ata_piix 0000:00:1f.2: PCI INT D disabled >> > [ ^[,A ^[(B225.446992] ehci_hcd 0000:00:1d.7: PCI INT A disabled >> > [ ^[,A ^[(B225.447061] uhci_hcd 0000:00:1d.2: PCI INT C disabled >> > [ ^[,A ^[(B225.447076] uhci_hcd 0000:00:1d.1: PCI INT B disabled >> > [ ^[,A ^[(B225.447090] uhci_hcd 0000:00:1d.0: PCI INT A disabled >> > [ ^[,A ^[(B225.653729] HDA Intel 0000:00:1b.0: PCI INT A disabled >> > [ ^[,A ^[(B225.666930] ehci_hcd 0000:00:1a.7: PCI INT C disabled >> > [ ^[,A ^[(B225.666952] uhci_hcd 0000:00:1a.2: PCI INT C disabled >> > [ ^[,A ^[(B225.666974] uhci_hcd 0000:00:1a.1: PCI INT B disabled >> > [ ^[,A ^[(B225.667001] uhci_hcd 0000:00:1a.0: PCI INT A disabled >> > [ ^[,A ^[(B225.680708] render error detected, EIR: 0x00000010 >> > [ ^[,A ^[(B225.680711] ^[,A ^[(B IPEIR: 0x00000000 >> > [ ^[,A ^[(B225.680714] ^[,A ^[(B IPEHR: 0x01000000 >> > [ ^[,A ^[(B225.680716] ^[,A ^[(B INSTDONE: 0xfffffffe >> > [ ^[,A ^[(B225.680718] ^[,A ^[(B INSTPS: 0x0001e000 >> > [ ^[,A ^[(B225.680720] ^[,A ^[(B INSTDONE1: 0xffffffff >> > [ ^[,A ^[(B225.680722] ^[,A ^[(B ACTHD: 0x02000018 >> > [ ^[,A ^[(B225.680725] page table error >> > [ ^[,A ^[(B225.680727] ^[,A ^[(B PGTBL_ER: 0x00100000 >> > [ ^[,A ^[(B225.680731] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking >> > [ ^[,A ^[(B225.731462] ACPI: Preparing to enter system sleep state S3 >> > [ ^[,A ^[(B225.754167] Disabling non-boot CPUs ... >> > [ ^[,A ^[(B225.809478] CPU 1 is now offline >> > [ ^[,A ^[(B225.809481] lockdep: fixing up alternatives. >> > [ ^[,A ^[(B225.809487] SMP alternatives: switching to UP code >> > [ ^[,A ^[(B225.816500] Extended CMOS year: 2000 >> > [ ^[,A ^[(B225.816500] Back to C! >> > [ ^[,A ^[(B225.816500] Extended CMOS year: 2000 >> > [ ^[,A ^[(B225.816720] Enabling non-boot CPUs ... >> > [ ^[,A ^[(B225.818422] lockdep: fixing up alternatives. >> > [ ^[,A ^[(B225.818425] SMP alternatives: switching to SMP code >> > [ ^[,A ^[(B225.822188] Booting processor 1 APIC 0x1 ip 0x6000 >> > [ ^[,A ^[(B225.818021] Initializing CPU#1 >> > [ ^[,A ^[(B225.818021] CPU: Physical Processor ID: 0 >> > [ ^[,A ^[(B225.818021] CPU: Processor Core ID: 1 >> > [ ^[,A ^[(B225.913392] CPU1: Intel(R) Core(TM)2 Duo CPU ^[,A ^[(B ^[,A ^[(B T7250 ^[,A ^[(B@ 2.00GHz stepping 0d >> > [ ^[,A ^[(B225.937046] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 >> > [ ^[,A ^[(B225.937053] platform microcode: firmware: requesting intel-ucode/06-0f-0d >> > [ ^[,A ^[(B225.937179] firmware microcode: parent microcode should not be sleeping >> > [ ^[,A ^[(B285.940840] CPU1 is up >> > [ ^[,A ^[(B285.941309] ACPI: Waking up from system sleep state S3 >> > [ ^[,A ^[(B285.991446] i915 0000:00:02.0: restoring config space at offset 0xf >> > (was 0x100, writing 0x10b) >> > [ ^[,A ^[(B285.991465] i915 0000:00:02.0: restoring config space at offset 0x8 >> > (was 0x1, writing 0xefe9) >> > [ ^[,A ^[(B285.991474] i915 0000:00:02.0: restoring config space at offset 0x6 >> > (was 0xc, writing 0xe000000c) >> > [ ^[,A ^[(B285.991488] i915 0000:00:02.0: restoring config space at offset 0x1 >> > (was 0x900007, writing 0x900407) >> > [ ^[,A ^[(B285.991554] pci 0000:00:02.1: restoring config space at offset 0x4 >> > (was 0x4, writing 0xf6b00004) >> > [ ^[,A ^[(B285.991564] pci 0000:00:02.1: restoring config space at offset 0x1 >> > (was 0x900000, writing 0x900007) >> > [ ^[,A ^[(B285.991594] uhci_hcd 0000:00:1a.0: restoring config space at offset >> > 0xf (was 0x100, writing 0x10a) >> > [ ^[,A ^[(B285.991618] uhci_hcd 0000:00:1a.0: restoring config space at offset >> > 0x8 (was 0x1, writing 0x6f61) >> > [ ^[,A ^[(B285.991643] uhci_hcd 0000:00:1a.0: restoring config space at offset >> > 0x1 (was 0x2900000, writing 0x2900001) >> > [ ^[,A ^[(B285.991678] uhci_hcd 0000:00:1a.1: restoring config space at offset >> > 0xf (was 0x200, writing 0x207) >> > [ ^[,A ^[(B285.991703] uhci_hcd 0000:00:1a.1: restoring config space at offset >> > 0x8 (was 0x1, writing 0x6f81) >> > [ ^[,A ^[(B285.991727] uhci_hcd 0000:00:1a.1: restoring config space at offset >> > 0x1 (was 0x2900000, writing 0x2900001) >> > [ ^[,A ^[(B285.991762] uhci_hcd 0000:00:1a.2: restoring config space at offset >> > 0xf (was 0x300, writing 0x305) >> > [ ^[,A ^[(B285.991786] uhci_hcd 0000:00:1a.2: restoring config space at offset >> > 0x8 (was 0x1, writing 0x6fa1) >> > [ ^[,A ^[(B285.991811] uhci_hcd 0000:00:1a.2: restoring config space at offset >> > 0x1 (was 0x2900000, writing 0x2900001) >> > [ ^[,A ^[(B285.991895] ehci_hcd 0000:00:1a.7: restoring config space at offset >> > 0x1 (was 0x2900106, writing 0x2900102) >> > [ ^[,A ^[(B285.991956] HDA Intel 0000:00:1b.0: restoring config space at >> > offset 0xf (was 0x100, writing 0x107) >> > [ ^[,A ^[(B285.991991] HDA Intel 0000:00:1b.0: restoring config space at >> > offset 0x4 (was 0xfebfc004, writing 0xf6afc004) >> > [ ^[,A ^[(B285.992000] HDA Intel 0000:00:1b.0: restoring config space at >> > offset 0x3 (was 0x0, writing 0x10) >> > [ ^[,A ^[(B285.992011] HDA Intel 0000:00:1b.0: restoring config space at >> > offset 0x1 (was 0x100000, writing 0x100102) >> > [ ^[,A ^[(B285.992068] pcieport 0000:00:1c.0: restoring config space at offset >> > 0xf (was 0x100, writing 0x20100) >> > [ ^[,A ^[(B285.992090] pcieport 0000:00:1c.0: restoring config space at offset >> > 0x9 (was 0x10001, writing 0x44314421) >> > [ ^[,A ^[(B285.992098] pcieport 0000:00:1c.0: restoring config space at offset >> > 0x8 (was 0x0, writing 0x44104400) >> > [ ^[,A ^[(B285.992107] pcieport 0000:00:1c.0: restoring config space at offset >> > 0x7 (was 0x20000000, writing 0x2020) >> > [ ^[,A ^[(B285.992115] pcieport 0000:00:1c.0: restoring config space at offset >> > 0x6 (was 0x0, writing 0xb0b00) >> > [ ^[,A ^[(B285.992129] pcieport 0000:00:1c.0: restoring config space at offset >> > 0x3 (was 0x810000, writing 0x810010) >> > [ ^[,A ^[(B285.992140] pcieport 0000:00:1c.0: restoring config space at offset >> > 0x1 (was 0x100000, writing 0x100507) >> > [ ^[,A ^[(B285.992227] pcieport 0000:00:1c.1: restoring config space at offset >> > 0xf (was 0x200, writing 0x20200) >> > [ ^[,A ^[(B285.992249] pcieport 0000:00:1c.1: restoring config space at offset >> > 0x9 (was 0x10001, writing 0x44514441) >> > [ ^[,A ^[(B285.992257] pcieport 0000:00:1c.1: restoring config space at offset >> > 0x8 (was 0x0, writing 0xf690f690) >> > [ ^[,A ^[(B285.992266] pcieport 0000:00:1c.1: restoring config space at offset >> > 0x7 (was 0x20000000, writing 0x3030) >> > [ ^[,A ^[(B285.992275] pcieport 0000:00:1c.1: restoring config space at offset >> > 0x6 (was 0x0, writing 0xc0c00) >> > [ ^[,A ^[(B285.992289] pcieport 0000:00:1c.1: restoring config space at offset >> > 0x3 (was 0x810000, writing 0x810010) >> > [ ^[,A ^[(B285.992300] pcieport 0000:00:1c.1: restoring config space at offset >> > 0x1 (was 0x100000, writing 0x100507) >> > [ ^[,A ^[(B285.992386] pcieport 0000:00:1c.4: restoring config space at offset >> > 0xf (was 0x100, writing 0x20100) >> > [ ^[,A ^[(B285.992408] pcieport 0000:00:1c.4: restoring config space at offset >> > 0x9 (was 0x10001, writing 0x44714461) >> > [ ^[,A ^[(B285.992417] pcieport 0000:00:1c.4: restoring config space at offset >> > 0x8 (was 0x0, writing 0xf680f680) >> > [ ^[,A ^[(B285.992425] pcieport 0000:00:1c.4: restoring config space at offset >> > 0x7 (was 0x20000000, writing 0x4040) >> > [ ^[,A ^[(B285.992434] pcieport 0000:00:1c.4: restoring config space at offset >> > 0x6 (was 0x0, writing 0x90900) >> > [ ^[,A ^[(B285.992448] pcieport 0000:00:1c.4: restoring config space at offset >> > 0x3 (was 0x810000, writing 0x810010) >> > [ ^[,A ^[(B285.992459] pcieport 0000:00:1c.4: restoring config space at offset >> > 0x1 (was 0x100000, writing 0x100407) >> > [ ^[,A ^[(B285.992571] uhci_hcd 0000:00:1d.0: restoring config space at offset >> > 0x1 (was 0x2900005, writing 0x2900001) >> > [ ^[,A ^[(B285.992606] uhci_hcd 0000:00:1d.1: restoring config space at offset >> > 0xf (was 0x200, writing 0x207) >> > [ ^[,A ^[(B285.992630] uhci_hcd 0000:00:1d.1: restoring config space at offset >> > 0x8 (was 0x1, writing 0x6f21) >> > [ ^[,A ^[(B285.992655] uhci_hcd 0000:00:1d.1: restoring config space at offset >> > 0x1 (was 0x2900000, writing 0x2900001) >> > [ ^[,A ^[(B285.992689] uhci_hcd 0000:00:1d.2: restoring config space at offset >> > 0xf (was 0x300, writing 0x305) >> > [ ^[,A ^[(B285.992714] uhci_hcd 0000:00:1d.2: restoring config space at offset >> > 0x8 (was 0x1, writing 0x6f41) >> > [ ^[,A ^[(B285.992738] uhci_hcd 0000:00:1d.2: restoring config space at offset >> > 0x1 (was 0x2900000, writing 0x2900001) >> > [ ^[,A ^[(B285.992823] ehci_hcd 0000:00:1d.7: restoring config space at offset >> > 0x1 (was 0x2900106, writing 0x2900102) >> > [ ^[,A ^[(B285.992883] pci 0000:00:1e.0: restoring config space at offset 0x9 >> > (was 0x1fff1, writing 0x43f14001) >> > [ ^[,A ^[(B285.992895] pci 0000:00:1e.0: restoring config space at offset 0x7 >> > (was 0x2280e0f0, writing 0x22805050) >> > [ ^[,A ^[(B285.992903] pci 0000:00:1e.0: restoring config space at offset 0x6 >> > (was 0x20020200, writing 0x20030200) >> > [ ^[,A ^[(B285.992997] pci 0000:00:1f.0: restoring config space at offset 0x1 >> > (was 0x2100007, writing 0x2100107) >> > [ ^[,A ^[(B285.993041] ata_piix 0000:00:1f.2: restoring config space at offset >> > 0xf (was 0x400, writing 0x40a) >> > [ ^[,A ^[(B285.993109] i801_smbus 0000:00:1f.3: restoring config space at >> > offset 0xf (was 0x200, writing 0x204) >> > [ ^[,A ^[(B285.993144] i801_smbus 0000:00:1f.3: restoring config space at >> > offset 0x4 (was 0x4, writing 0xf6afbf04) >> > [ ^[,A ^[(B285.993159] i801_smbus 0000:00:1f.3: restoring config space at >> > offset 0x1 (was 0x2800001, writing 0x2800103) >> > [ ^[,A ^[(B285.993192] ata_piix 0000:00:1f.5: restoring config space at offset >> > 0xf (was 0x400, writing 0x40a) >> > [ ^[,A ^[(B285.993214] ata_piix 0000:00:1f.5: restoring config space at offset >> > 0x9 (was 0x1, writing 0xeff1) >> > [ ^[,A ^[(B285.993241] ata_piix 0000:00:1f.5: restoring config space at offset >> > 0x1 (was 0x2b00000, writing 0x2b00007) >> > [ ^[,A ^[(B285.993557] b43-pci-bridge 0000:0c:00.0: restoring config space at >> > offset 0xf (was 0x100, writing 0x104) >> > [ ^[,A ^[(B285.993632] b43-pci-bridge 0000:0c:00.0: restoring config space at >> > offset 0x4 (was 0x4, writing 0xf69fc004) >> > [ ^[,A ^[(B285.993648] b43-pci-bridge 0000:0c:00.0: restoring config space at >> > offset 0x3 (was 0x0, writing 0x10) >> > [ ^[,A ^[(B285.993669] b43-pci-bridge 0000:0c:00.0: restoring config space at >> > offset 0x1 (was 0x100000, writing 0x100106) >> > [ ^[,A ^[(B285.993877] tg3 0000:09:00.0: restoring config space at offset 0x3 >> > (was 0x0, writing 0x10) >> > [ ^[,A ^[(B285.993890] tg3 0000:09:00.0: restoring config space at offset 0x1 >> > (was 0x100000, writing 0x100106) >> > [ ^[,A ^[(B285.993958] pci 0000:02:01.0: restoring config space at offset 0xf >> > (was 0x7000100, writing 0x700010a) >> > [ ^[,A ^[(B285.993966] pci 0000:02:01.0: restoring config space at offset 0xe >> > (was 0x0, writing 0x51fc) >> > [ ^[,A ^[(B285.993975] pci 0000:02:01.0: restoring config space at offset 0xd >> > (was 0x0, writing 0x5100) >> > [ ^[,A ^[(B285.993983] pci 0000:02:01.0: restoring config space at offset 0xc >> > (was 0x0, writing 0x50fc) >> > [ ^[,A ^[(B285.993992] pci 0000:02:01.0: restoring config space at offset 0xb >> > (was 0x0, writing 0x5000) >> > [ ^[,A ^[(B285.994000] pci 0000:02:01.0: restoring config space at offset 0xa >> > (was 0x0, writing 0x4bfff000) >> > [ ^[,A ^[(B285.994009] pci 0000:02:01.0: restoring config space at offset 0x9 >> > (was 0x0, writing 0x48000000) >> > [ ^[,A ^[(B285.994017] pci 0000:02:01.0: restoring config space at offset 0x8 >> > (was 0x0, writing 0x43fff000) >> > [ ^[,A ^[(B285.994026] pci 0000:02:01.0: restoring config space at offset 0x7 >> > (was 0x0, writing 0x40000000) >> > [ ^[,A ^[(B285.994035] pci 0000:02:01.0: restoring config space at offset 0x6 >> > (was 0x0, writing 0xb0060302) >> > [ ^[,A ^[(B285.994046] pci 0000:02:01.0: restoring config space at offset 0x4 >> > (was 0x0, writing 0xf6700000) >> > [ ^[,A ^[(B285.994054] pci 0000:02:01.0: restoring config space at offset 0x3 >> > (was 0x820000, writing 0x824000) >> > [ ^[,A ^[(B285.994066] pci 0000:02:01.0: restoring config space at offset 0x1 >> > (was 0x2100000, writing 0x2100107) >> > [ ^[,A ^[(B285.994106] ohci1394 0000:02:01.1: restoring config space at offset >> > 0xf (was 0x4020200, writing 0x4020204) >> > [ ^[,A ^[(B285.994146] ohci1394 0000:02:01.1: restoring config space at offset >> > 0x3 (was 0x800000, writing 0x804010) >> > [ ^[,A ^[(B285.994159] ohci1394 0000:02:01.1: restoring config space at offset >> > 0x1 (was 0x2100000, writing 0x2100106) >> > [ ^[,A ^[(B285.994197] sdhci-pci 0000:02:01.2: restoring config space at >> > offset 0xf (was 0x300, writing 0x303) >> > [ ^[,A ^[(B285.994232] sdhci-pci 0000:02:01.2: restoring config space at >> > offset 0x4 (was 0x0, writing 0xf67ff700) >> > [ ^[,A ^[(B285.994241] sdhci-pci 0000:02:01.2: restoring config space at >> > offset 0x3 (was 0x800000, writing 0x804010) >> > [ ^[,A ^[(B285.994253] sdhci-pci 0000:02:01.2: restoring config space at >> > offset 0x1 (was 0x2100000, writing 0x2100106) >> > [ ^[,A ^[(B286.009482] PM: Device PNP0C0D:00 failed to resume: error 1 >> > [ ^[,A ^[(B286.039022] dell-wmi: Unknown key e044 pressed >> > [ ^[,A ^[(B286.151069] i915 0000:00:02.0: setting latency timer to 64 >> > [ ^[,A ^[(B286.243570] [drm] LVDS-8: set mode 1280x800 c >> > [ ^[,A ^[(B286.290393] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >> > [ ^[,A ^[(B286.290404] uhci_hcd 0000:00:1a.0: setting latency timer to 64 >> > [ ^[,A ^[(B286.290441] usb usb3: root hub lost power or was reset >> > [ ^[,A ^[(B286.290466] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 >> > [ ^[,A ^[(B286.290475] uhci_hcd 0000:00:1a.1: setting latency timer to 64 >> > [ ^[,A ^[(B286.290505] usb usb4: root hub lost power or was reset >> > [ ^[,A ^[(B286.290527] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 >> > [ ^[,A ^[(B286.290537] uhci_hcd 0000:00:1a.2: setting latency timer to 64 >> > [ ^[,A ^[(B286.290565] usb usb5: root hub lost power or was reset >> > [ ^[,A ^[(B286.290588] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 >> > [ ^[,A ^[(B286.290598] ehci_hcd 0000:00:1a.7: setting latency timer to 64 >> > [ ^[,A ^[(B286.290613] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, >> > low) -> IRQ 21 >> > [ ^[,A ^[(B286.290623] HDA Intel 0000:00:1b.0: setting latency timer to 64 >> > [ ^[,A ^[(B286.290689] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X >> > [ ^[,A ^[(B286.290764] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >> > [ ^[,A ^[(B286.290773] uhci_hcd 0000:00:1d.0: setting latency timer to 64 >> > [ ^[,A ^[(B286.290801] usb usb6: root hub lost power or was reset >> > [ ^[,A ^[(B286.290846] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 >> > [ ^[,A ^[(B286.290856] uhci_hcd 0000:00:1d.1: setting latency timer to 64 >> > [ ^[,A ^[(B286.290887] usb usb7: root hub lost power or was reset >> > [ ^[,A ^[(B286.290911] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 >> > [ ^[,A ^[(B286.290921] uhci_hcd 0000:00:1d.2: setting latency timer to 64 >> > [ ^[,A ^[(B286.290950] usb usb8: root hub lost power or was reset >> > [ ^[,A ^[(B286.290972] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >> > [ ^[,A ^[(B286.290982] ehci_hcd 0000:00:1d.7: setting latency timer to 64 >> > [ ^[,A ^[(B286.291001] pci 0000:00:1e.0: setting latency timer to 64 >> > [ ^[,A ^[(B286.291018] ata_piix 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 >> > [ ^[,A ^[(B286.291025] ata_piix 0000:00:1f.2: setting latency timer to 64 >> > [ ^[,A ^[(B286.291110] ata_piix 0000:00:1f.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 >> > [ ^[,A ^[(B286.291119] ata_piix 0000:00:1f.5: setting latency timer to 64 >> > [ ^[,A ^[(B286.291394] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 >> > (level, low) -> IRQ 17 >> > [ ^[,A ^[(B286.307121] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 >> > [ ^[,A ^[(B286.362261] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] >> > MMIO=[f67ff800-f67fffff] ^[,A ^[(BMax Packet=[2048] ^[,A ^[(BIR/IT contexts=[4/4] >> > [ ^[,A ^[(B286.368333] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, >> > low) -> IRQ 18 >> > [ ^[,A ^[(B286.383529] mmc0: Minimum clock frequency too high for identification mode >> > [ ^[,A ^[(B286.423034] sd 0:0:0:0: [sda] Starting disk >> > [ ^[,A ^[(B286.621595] ata3: SATA link down (SStatus 0 SControl 300) >> > [ ^[,A ^[(B286.632845] ata4: SATA link down (SStatus 4 SControl 300) >> > [ ^[,A ^[(B286.763599] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> > [ ^[,A ^[(B286.763812] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> > [ ^[,A ^[(B286.823841] ata2.00: configured for UDMA/100 >> > [ ^[,A ^[(B287.027642] ata1.00: configured for UDMA/133 >> > [ ^[,A ^[(B287.095609] PM: Finishing wakeup. >> > [ ^[,A ^[(B287.095611] Restarting tasks ... done. >> > [ ^[,A ^[(B457.056279] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B457.249535] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B457.423506] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B457.608626] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B457.788025] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B457.947402] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B460.438540] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B475.910065] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B476.103445] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B477.844084] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B478.093328] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B478.950676] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B479.229816] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B479.459126] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B479.658534] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B480.525933] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B480.748745] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B480.944699] dell-wmi: Unknown key 48 pressed >> > [ ^[,A ^[(B549.103799] b43 ssb0:0: firmware: requesting b43/ucode15.fw >> > [ ^[,A ^[(B549.215863] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw >> > [ ^[,A ^[(B549.244516] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw >> > [ ^[,A ^[(B549.403735] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) >> > [ ^[,A ^[(B549.406244] b43-phy0 debug: b2062: Using crystal tab entry 19200 kHz. >> > [ ^[,A ^[(B553.990808] b43-phy0 debug: Chip initialized >> > [ ^[,A ^[(B553.991181] b43-phy0 debug: PIO initialized >> > [ ^[,A ^[(B553.991297] b43-phy0 debug: QoS enabled >> > [ ^[,A ^[(B554.010624] b43-phy0 debug: Wireless interface started >> > [ ^[,A ^[(B554.018136] b43-phy0 debug: Adding Interface type 2 >> > [ ^[,A ^[(B555.225635] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) >> > [ ^[,A ^[(B555.227406] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) >> > [ ^[,A ^[(B555.247446] wlan0: direct probe responded >> > [ ^[,A ^[(B555.247504] wlan0: authenticate with AP 00:02:2d:08:51:2b (try 1) >> > [ ^[,A ^[(B555.275021] wlan0: authenticated >> > [ ^[,A ^[(B555.275905] wlan0: associate with AP 00:02:2d:08:51:2b (try 1) >> > [ ^[,A ^[(B555.284599] wlan0: RX AssocResp from 00:02:2d:08:51:2b (capab=0x1 >> > status=0 aid=12) >> > [ ^[,A ^[(B555.284608] wlan0: associated >> > [ ^[,A ^[(B561.323866] mtrr: type mismatch for e0000000,10000000 old: >> > write-back new: write-combining >> > [ 2688.500033] No probe response from AP 00:02:2d:08:51:2b after >> > 500ms, disconnecting. >> > [ 2689.580376] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) >> > [ 2689.780643] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 2) >> > [ 2689.798772] wlan0: direct probe responded >> > [ 2689.798778] wlan0: authenticate with AP 00:02:2d:08:51:2b (try 1) >> > [ 2689.986996] wlan0: authenticated >> > [ 2689.987691] wlan0: associate with AP 00:02:2d:08:51:2b (try 1) >> > [ 2690.006697] wlan0: RX ReassocResp from 00:02:2d:08:51:2b (capab=0x1 >> > status=0 aid=1) >> > [ 2690.006706] wlan0: associated >> > >> > -- >> > Regards >> > dave >> > >> >> >> >> -- >> Regards >> dave >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> Please read the FAQ at http://www.tux.org/lkml/ > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly 2009-12-10 22:29 ` David Miller @ 2009-12-11 9:09 ` Johannes Berg 2009-12-11 9:14 ` Dave Young 0 siblings, 1 reply; 16+ messages in thread From: Johannes Berg @ 2009-12-11 9:09 UTC (permalink / raw) To: David Miller Cc: kosaki.motohiro, hidave.darkstar, akpm, linux-kernel, linux-wireless [-- Attachment #1: Type: text/plain, Size: 800 bytes --] On Thu, 2009-12-10 at 14:29 -0800, David Miller wrote: > From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> > Date: Thu, 10 Dec 2009 18:52:51 +0900 (JST) > > > (cc to netdev) > > > > Hi net-folks > > > >> > [ ^[,A 561.323866] mtrr: type mismatch for e0000000,10000000 old: > >> > write-back new: write-combining > >> > [ 2688.500033] No probe response from AP 00:02:2d:08:51:2b after > >> > 500ms, disconnecting. > >> > [ 2689.580376] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) > > > > What's mean "No probe response"? Why its point waste 2000sec? > > I think you'll get more responses from the wireless list, > replacing netdev with linux-wireless in the CC:... That is definitely done asynchronously, there's no reason it should delay the resume. johannes [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 801 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: mmotm-2009-12-08-17-45 resume slowly 2009-12-11 9:09 ` Johannes Berg @ 2009-12-11 9:14 ` Dave Young 0 siblings, 0 replies; 16+ messages in thread From: Dave Young @ 2009-12-11 9:14 UTC (permalink / raw) To: Johannes Berg Cc: David Miller, kosaki.motohiro, akpm, linux-kernel, linux-wireless On Fri, Dec 11, 2009 at 5:09 PM, Johannes Berg <johannes@sipsolutions.net> wrote: > On Thu, 2009-12-10 at 14:29 -0800, David Miller wrote: >> From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> >> Date: Thu, 10 Dec 2009 18:52:51 +0900 (JST) >> >> > (cc to netdev) >> > >> > Hi net-folks >> > >> >> > [ ,A 561.323866] mtrr: type mismatch for e0000000,10000000 old: >> >> > write-back new: write-combining >> >> > [ 2688.500033] No probe response from AP 00:02:2d:08:51:2b after >> >> > 500ms, disconnecting. >> >> > [ 2689.580376] wlan0: direct probe to AP 00:02:2d:08:51:2b (try 1) >> > >> > What's mean "No probe response"? Why its point waste 2000sec? >> >> I think you'll get more responses from the wireless list, >> replacing netdev with linux-wireless in the CC:... > > That is definitely done asynchronously, there's no reason it should > delay the resume. Yes, agree too. Please see my another reply. the darkness of screen make me post more kernel messages then needed. > > johannes > -- Regards dave ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2009-12-11 9:14 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <a8e1da0912100127k4dcddd65gfe5ff0b1330fe63b@mail.gmail.com>
2009-12-10 9:30 ` mmotm-2009-12-08-17-45 resume slowly Dave Young
2009-12-10 9:52 ` KOSAKI Motohiro
2009-12-10 22:11 ` Nigel Cunningham
2009-12-11 1:47 ` Dave Young
2009-12-11 1:47 ` Dave Young
2009-12-11 2:37 ` Zhu Yi
2009-12-11 3:35 ` Dave Young
2009-12-11 8:10 ` Zhu Yi
2009-12-11 8:10 ` Zhu Yi
2009-12-11 8:59 ` Dave Young
2009-12-11 8:59 ` Dave Young
2009-12-11 9:10 ` Dave Young
2009-12-11 9:10 ` Dave Young
2009-12-10 22:29 ` David Miller
2009-12-11 9:09 ` Johannes Berg
2009-12-11 9:14 ` Dave Young
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.