From: lrg@slimlogic.co.uk (Liam Girdwood)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] regulator: add voltage selection capability to mc13783 regulators v2 .
Date: Tue, 15 Dec 2009 14:54:42 +0000 [thread overview]
Message-ID: <1260888882.3591.559.camel@odin> (raw)
In-Reply-To: <1260811598.2022.144.camel@climbing-alby>
On Mon, 2009-12-14 at 18:26 +0100, Alberto Panizzo wrote:
> This patch, complete the mc13783 regulator subsystem driver with
> voltage selecting capability.
> Main Switches (SW1AB, SW2AB) are not supported yet.
>
> version 2 diffs:
> - delete the "Switchers PLL" enable and multiplication factor value
> selecting capability because it is not a voltage or current regulator.
> This will be a part of Main switcher supporting task.
> - Correct many coding style problems pointed me out.
>
> Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
> drivers/regulator/mc13783-regulator.c | 345 ++++++++++++++++++++++++++++++---
> 1 files changed, 315 insertions(+), 30 deletions(-)
Applied.
Thanks
Liam
WARNING: multiple messages have this Message-ID (diff)
From: Liam Girdwood <lrg@slimlogic.co.uk>
To: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Samuel Ortiz" <sameo@linux.intel.com>,
"Sascha linux-arm" <s.hauer@pengutronix.de>,
"Mark Brown" <broonie@opensource.wolfsonmicro.com>,
linux-kernel <linux-kernel@vger.kernel.org>,
linux-arm-kernel-infradead <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 3/4] regulator: add voltage selection capability to mc13783 regulators v2 .
Date: Tue, 15 Dec 2009 14:54:42 +0000 [thread overview]
Message-ID: <1260888882.3591.559.camel@odin> (raw)
In-Reply-To: <1260811598.2022.144.camel@climbing-alby>
On Mon, 2009-12-14 at 18:26 +0100, Alberto Panizzo wrote:
> This patch, complete the mc13783 regulator subsystem driver with
> voltage selecting capability.
> Main Switches (SW1AB, SW2AB) are not supported yet.
>
> version 2 diffs:
> - delete the "Switchers PLL" enable and multiplication factor value
> selecting capability because it is not a voltage or current regulator.
> This will be a part of Main switcher supporting task.
> - Correct many coding style problems pointed me out.
>
> Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
> drivers/regulator/mc13783-regulator.c | 345 ++++++++++++++++++++++++++++++---
> 1 files changed, 315 insertions(+), 30 deletions(-)
Applied.
Thanks
Liam
next prev parent reply other threads:[~2009-12-15 14:54 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-14 16:41 [PATCH 0/4 v2] Patch series for introduce voltage selecting for mc13783 regulators Alberto Panizzo
2009-12-14 16:41 ` Alberto Panizzo
2009-12-14 17:12 ` [PATCH 1/4] mfd: mc13783: Take care of semantic inversion between read and write value of two bits in POWER_MISCELLANEUS register Alberto Panizzo
2009-12-14 17:12 ` Alberto Panizzo
2009-12-14 17:18 ` [PATCH 2/4] mfd: mc13783: When probing, unlock the mc13783 before subsystems initialisation Alberto Panizzo
2009-12-14 17:18 ` Alberto Panizzo
2009-12-14 17:26 ` [PATCH 3/4] regulator: add voltage selection capability to mc13783 regulators v2 Alberto Panizzo
2009-12-14 17:26 ` Alberto Panizzo
2009-12-14 17:53 ` [PATCH 4/4] regulator: mc13783-regulator: correct the probing time Alberto Panizzo
2009-12-14 17:53 ` Alberto Panizzo
2009-12-15 14:50 ` Liam Girdwood
2009-12-15 14:50 ` Liam Girdwood
2009-12-15 14:52 ` Mark Brown
2009-12-15 14:52 ` Mark Brown
2009-12-15 14:54 ` Liam Girdwood [this message]
2009-12-15 14:54 ` [PATCH 3/4] regulator: add voltage selection capability to mc13783 regulators v2 Liam Girdwood
2009-12-18 16:12 ` [PATCH 2/4] mfd: mc13783: When probing, unlock the mc13783 before subsystems initialisation Alberto Panizzo
2009-12-18 16:12 ` Alberto Panizzo
2009-12-19 20:18 ` Uwe Kleine-König
2009-12-19 20:18 ` Uwe Kleine-König
2009-12-20 13:48 ` Alberto Panizzo
2009-12-20 13:48 ` Alberto Panizzo
2009-12-20 18:49 ` Uwe Kleine-König
2009-12-20 18:49 ` Uwe Kleine-König
2009-12-20 22:50 ` Alberto Panizzo
2009-12-20 22:50 ` Alberto Panizzo
2010-01-08 11:13 ` Alberto Panizzo
2010-01-08 11:13 ` Alberto Panizzo
2010-01-08 11:44 ` Samuel Ortiz
2010-01-08 11:44 ` Samuel Ortiz
2009-12-14 17:45 ` [PATCH 1/4] mfd: mc13783: Take care of semantic inversion between read and write value of two bits in POWER_MISCELLANEUS register Sergei Shtylyov
2009-12-14 17:59 ` Alberto Panizzo
2009-12-14 17:59 ` Alberto Panizzo
2010-01-05 18:15 ` Samuel Ortiz
2010-01-05 18:15 ` Samuel Ortiz
2010-01-05 19:55 ` Uwe Kleine-König
2010-01-05 19:55 ` Uwe Kleine-König
2010-01-08 10:53 ` Alberto Panizzo
2010-01-08 10:53 ` Alberto Panizzo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1260888882.3591.559.camel@odin \
--to=lrg@slimlogic.co.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.