From: Detlev Casanova <detlev.casanova@collabora.com>
To: heiko@sntech.de, Andy Yan <andyshrk@163.com>
Cc: krzk+dt@kernel.org, robh@kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
Andy Yan <andy.yan@rock-chips.com>
Subject: Re: [PATCH v3 1/3] arm64: dts: rockchip: Add vop for rk3576
Date: Tue, 04 Mar 2025 12:15:41 -0500 [thread overview]
Message-ID: <12619358.O9o76ZdvQC@earth> (raw)
In-Reply-To: <20241231095728.253943-2-andyshrk@163.com>
Hi andy,
On Tuesday, 31 December 2024 04:57:18 EST Andy Yan wrote:
> From: Andy Yan <andy.yan@rock-chips.com>
>
> Add VOP and VOP_MMU found on rk3576.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>
> ---
>
> Changes in v3:
> - Split from
> https://lore.kernel.org/linux-rockchip/3330586.aeNJFYEL58@diego/T/#t
>
> arch/arm64/boot/dts/rockchip/rk3576.dtsi | 68 ++++++++++++++++++++++++
> 1 file changed, 68 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3576.dtsi index 436232ffe4d1..130d11a2cc89
> 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
> @@ -393,6 +393,11 @@ opp-950000000 {
> };
> };
>
> + display_subsystem: display-subsystem {
> + compatible = "rockchip,display-subsystem";
> + ports = <&vop_out>;
> + };
> +
> firmware {
> scmi: scmi {
> compatible = "arm,scmi-smc";
> @@ -826,6 +831,69 @@ gpu: gpu@27800000 {
> status = "disabled";
> };
>
> + vop: vop@27d00000 {
> + compatible = "rockchip,rk3576-vop";
> + reg = <0x0 0x27d00000 0x0 0x3000>, <0x0 0x27d05000
0x0 0x1000>;
> + reg-names = "vop", "gamma-lut";
> + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "vop-sys",
> + "vop-vp0",
> + "vop-vp1",
> + "vop-vp2";
These need to be renamed without the 'vop-' prefix.
> + clocks = <&cru ACLK_VOP>,
> + <&cru HCLK_VOP>,
> + <&cru DCLK_VP0>,
> + <&cru DCLK_VP1>,
> + <&cru DCLK_VP2>;
> + clock-names = "aclk",
> + "hclk",
> + "dclk_vp0",
> + "dclk_vp1",
> + "dclk_vp2";
> + iommus = <&vop_mmu>;
> + power-domains = <&power RK3576_PD_VOP>;
> + rockchip,grf = <&sys_grf>;
> + rockchip,pmu = <&pmu>;
> + status = "disabled";
> +
> + vop_out: ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + vp0: port@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> + };
> +
> + vp1: port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> + };
> +
> + vp2: port@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <2>;
> + };
> + };
> + };
> +
> + vop_mmu: iommu@27d07e00 {
> + compatible = "rockchip,rk3576-iommu",
"rockchip,rk3568-iommu";
> + reg = <0x0 0x27d07e00 0x0 0x100>, <0x0 0x27d07f00
0x0 0x100>;
> + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
> + clock-names = "aclk", "iface";
> + #iommu-cells = <0>;
> + power-domains = <&power RK3576_PD_VOP>;
> + status = "disabled";
> + };
> +
> qos_hdcp1: qos@27f02000 {
> compatible = "rockchip,rk3576-qos", "syscon";
> reg = <0x0 0x27f02000 0x0 0x20>;
Regards,
Detlev
WARNING: multiple messages have this Message-ID (diff)
From: Detlev Casanova <detlev.casanova@collabora.com>
To: heiko@sntech.de, Andy Yan <andyshrk@163.com>
Cc: krzk+dt@kernel.org, robh@kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
Andy Yan <andy.yan@rock-chips.com>
Subject: Re: [PATCH v3 1/3] arm64: dts: rockchip: Add vop for rk3576
Date: Tue, 04 Mar 2025 12:15:41 -0500 [thread overview]
Message-ID: <12619358.O9o76ZdvQC@earth> (raw)
In-Reply-To: <20241231095728.253943-2-andyshrk@163.com>
Hi andy,
On Tuesday, 31 December 2024 04:57:18 EST Andy Yan wrote:
> From: Andy Yan <andy.yan@rock-chips.com>
>
> Add VOP and VOP_MMU found on rk3576.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>
> ---
>
> Changes in v3:
> - Split from
> https://lore.kernel.org/linux-rockchip/3330586.aeNJFYEL58@diego/T/#t
>
> arch/arm64/boot/dts/rockchip/rk3576.dtsi | 68 ++++++++++++++++++++++++
> 1 file changed, 68 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3576.dtsi index 436232ffe4d1..130d11a2cc89
> 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
> @@ -393,6 +393,11 @@ opp-950000000 {
> };
> };
>
> + display_subsystem: display-subsystem {
> + compatible = "rockchip,display-subsystem";
> + ports = <&vop_out>;
> + };
> +
> firmware {
> scmi: scmi {
> compatible = "arm,scmi-smc";
> @@ -826,6 +831,69 @@ gpu: gpu@27800000 {
> status = "disabled";
> };
>
> + vop: vop@27d00000 {
> + compatible = "rockchip,rk3576-vop";
> + reg = <0x0 0x27d00000 0x0 0x3000>, <0x0 0x27d05000
0x0 0x1000>;
> + reg-names = "vop", "gamma-lut";
> + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "vop-sys",
> + "vop-vp0",
> + "vop-vp1",
> + "vop-vp2";
These need to be renamed without the 'vop-' prefix.
> + clocks = <&cru ACLK_VOP>,
> + <&cru HCLK_VOP>,
> + <&cru DCLK_VP0>,
> + <&cru DCLK_VP1>,
> + <&cru DCLK_VP2>;
> + clock-names = "aclk",
> + "hclk",
> + "dclk_vp0",
> + "dclk_vp1",
> + "dclk_vp2";
> + iommus = <&vop_mmu>;
> + power-domains = <&power RK3576_PD_VOP>;
> + rockchip,grf = <&sys_grf>;
> + rockchip,pmu = <&pmu>;
> + status = "disabled";
> +
> + vop_out: ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + vp0: port@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> + };
> +
> + vp1: port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> + };
> +
> + vp2: port@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <2>;
> + };
> + };
> + };
> +
> + vop_mmu: iommu@27d07e00 {
> + compatible = "rockchip,rk3576-iommu",
"rockchip,rk3568-iommu";
> + reg = <0x0 0x27d07e00 0x0 0x100>, <0x0 0x27d07f00
0x0 0x100>;
> + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
> + clock-names = "aclk", "iface";
> + #iommu-cells = <0>;
> + power-domains = <&power RK3576_PD_VOP>;
> + status = "disabled";
> + };
> +
> qos_hdcp1: qos@27f02000 {
> compatible = "rockchip,rk3576-qos", "syscon";
> reg = <0x0 0x27f02000 0x0 0x20>;
Regards,
Detlev
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2025-03-04 19:01 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-31 9:57 [PATCH v3 0/3] Add display subsystem dt node on rk3576 Andy Yan
2024-12-31 9:57 ` Andy Yan
2024-12-31 9:57 ` [PATCH v3 1/3] arm64: dts: rockchip: Add vop for rk3576 Andy Yan
2024-12-31 9:57 ` Andy Yan
2025-03-04 17:15 ` Detlev Casanova [this message]
2025-03-04 17:15 ` Detlev Casanova
2024-12-31 9:57 ` [PATCH v3 2/3] arm64: dts: rockchip: Add hdmi " Andy Yan
2024-12-31 9:57 ` Andy Yan
2025-03-04 17:17 ` Detlev Casanova
2025-03-04 17:17 ` Detlev Casanova
2024-12-31 9:57 ` [PATCH v3 3/3] arm64: dts: rockchip: Enable hdmi display on sige5 Andy Yan
2024-12-31 9:57 ` Andy Yan
2024-12-31 12:57 ` [PATCH v3 0/3] Add display subsystem dt node on rk3576 Rob Herring (Arm)
2024-12-31 12:57 ` Rob Herring (Arm)
2025-03-04 14:47 ` Sebastian Reichel
2025-03-04 14:47 ` Sebastian Reichel
2025-03-04 21:16 ` Heiko Stübner
2025-03-04 21:16 ` Heiko Stübner
2025-03-05 2:55 ` Andy Yan
2025-03-05 2:55 ` Andy Yan
2025-03-04 21:14 ` Heiko Stuebner
2025-03-04 21:14 ` Heiko Stuebner
-- strict thread matches above, loose matches on Subject: below --
2025-01-01 6:35 [PATCH v3 1/3] arm64: dts: rockchip: Add vop for rk3576 kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12619358.O9o76ZdvQC@earth \
--to=detlev.casanova@collabora.com \
--cc=andy.yan@rock-chips.com \
--cc=andyshrk@163.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.