From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Takashi Iwai <tiwai@suse.de>
Cc: linux-mips@linux-mips.org, alsa-devel@alsa-project.org,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Becky Bruce <beckyb@kernel.crashing.org>,
Wu Zhangjin <wuzhangjin@gmail.com>,
Ralf Baechle <ralf@linux-mips.org>, Andreas Mohr <andi@lisas.de>,
Kumar Gala <galak@gate.crashing.org>
Subject: Re: [PATCH 0/5] PCM mmap (temporary) fixes for non-coherent architectures
Date: Fri, 15 Jan 2010 14:28:02 +1100 [thread overview]
Message-ID: <1263526082.724.395.camel@pasglop> (raw)
In-Reply-To: <s5hljg24bl7.wl%tiwai@suse.de>
> A quick patch below (totally untested!) might do that.
> It's passing the device struct blindly, so not sure whether this would
> actually work for all dma_alloc_coherent().
On archs that have dma_ops such as powerpc (but I think x86 too
nowadays) you cannot use the USB device for dma_* operations. You need
to get up to the host controller device...
It -might- be worth looking at adding code to the USB stack to propagate
the parent device dma_ops down to USB devices... hard to tell.
Cheers,
Ben.
>
> Takashi
>
> ---
> diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
> index 9edef46..6c82026 100644
> --- a/sound/usb/usbaudio.c
> +++ b/sound/usb/usbaudio.c
> @@ -734,7 +734,7 @@ static void snd_complete_sync_urb(struct urb *urb)
> }
> }
>
> -
> +#ifdef USBAUDIO_VMALLOC_BUFFER
> /* get the physical page pointer at the given offset */
> static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs,
> unsigned long offset)
> @@ -769,6 +769,24 @@ static int snd_pcm_free_vmalloc_buffer(struct snd_pcm_substream *subs)
> return 0;
> }
>
> +#define preallocate_buffer(chip, pcm, stream) /* NOP */
> +
> +#else
> +#define snd_pcm_get_vmalloc_page NULL
> +#define snd_pcm_alloc_vmalloc_buffer snd_pcm_lib_malloc_pages
> +#define snd_pcm_free_vmalloc_buffer snd_pcm_lib_free_pages
> +
> +static int preallocate_buffer(struct snd_usb_audio *chip, struct snd_pcm *pcm,
> + int stream)
> +{
> + struct snd_pcm_substream *subs = pcm->streams[stream].substream;
> + if (!subs)
> + return 0;
> + return snd_pcm_lib_preallocate_pages(subs, SNDRV_DMA_TYPE_DEV,
> + chip->card->dev,
> + 1024 * 64, 1024 * 1024);
> +}
> +#endif
>
> /*
> * unlink active urbs.
> @@ -2328,6 +2346,7 @@ static int add_audio_endpoint(struct snd_usb_audio *chip, int stream, struct aud
> err = snd_pcm_new_stream(as->pcm, stream, 1);
> if (err < 0)
> return err;
> + preallocate_buffer(chip, as->pcm, stream);
> init_substream(as, stream, fp);
> return 0;
> }
> @@ -2356,6 +2375,7 @@ static int add_audio_endpoint(struct snd_usb_audio *chip, int stream, struct aud
> else
> strcpy(pcm->name, "USB Audio");
>
> + preallocate_buffer(chip, pcm, stream);
> init_substream(as, stream, fp);
>
> list_add(&as->list, &chip->pcm_list);
WARNING: multiple messages have this Message-ID (diff)
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Takashi Iwai <tiwai@suse.de>
Cc: Andreas Mohr <andi@lisas.de>,
alsa-devel@alsa-project.org, Ralf Baechle <ralf@linux-mips.org>,
Wu Zhangjin <wuzhangjin@gmail.com>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
linux-mips@linux-mips.org, Kumar Gala <galak@gate.crashing.org>,
Becky Bruce <beckyb@kernel.crashing.org>
Subject: Re: [PATCH 0/5] PCM mmap (temporary) fixes for non-coherent architectures
Date: Fri, 15 Jan 2010 14:28:02 +1100 [thread overview]
Message-ID: <1263526082.724.395.camel@pasglop> (raw)
In-Reply-To: <s5hljg24bl7.wl%tiwai@suse.de>
> A quick patch below (totally untested!) might do that.
> It's passing the device struct blindly, so not sure whether this would
> actually work for all dma_alloc_coherent().
On archs that have dma_ops such as powerpc (but I think x86 too
nowadays) you cannot use the USB device for dma_* operations. You need
to get up to the host controller device...
It -might- be worth looking at adding code to the USB stack to propagate
the parent device dma_ops down to USB devices... hard to tell.
Cheers,
Ben.
>
> Takashi
>
> ---
> diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
> index 9edef46..6c82026 100644
> --- a/sound/usb/usbaudio.c
> +++ b/sound/usb/usbaudio.c
> @@ -734,7 +734,7 @@ static void snd_complete_sync_urb(struct urb *urb)
> }
> }
>
> -
> +#ifdef USBAUDIO_VMALLOC_BUFFER
> /* get the physical page pointer at the given offset */
> static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs,
> unsigned long offset)
> @@ -769,6 +769,24 @@ static int snd_pcm_free_vmalloc_buffer(struct snd_pcm_substream *subs)
> return 0;
> }
>
> +#define preallocate_buffer(chip, pcm, stream) /* NOP */
> +
> +#else
> +#define snd_pcm_get_vmalloc_page NULL
> +#define snd_pcm_alloc_vmalloc_buffer snd_pcm_lib_malloc_pages
> +#define snd_pcm_free_vmalloc_buffer snd_pcm_lib_free_pages
> +
> +static int preallocate_buffer(struct snd_usb_audio *chip, struct snd_pcm *pcm,
> + int stream)
> +{
> + struct snd_pcm_substream *subs = pcm->streams[stream].substream;
> + if (!subs)
> + return 0;
> + return snd_pcm_lib_preallocate_pages(subs, SNDRV_DMA_TYPE_DEV,
> + chip->card->dev,
> + 1024 * 64, 1024 * 1024);
> +}
> +#endif
>
> /*
> * unlink active urbs.
> @@ -2328,6 +2346,7 @@ static int add_audio_endpoint(struct snd_usb_audio *chip, int stream, struct aud
> err = snd_pcm_new_stream(as->pcm, stream, 1);
> if (err < 0)
> return err;
> + preallocate_buffer(chip, as->pcm, stream);
> init_substream(as, stream, fp);
> return 0;
> }
> @@ -2356,6 +2375,7 @@ static int add_audio_endpoint(struct snd_usb_audio *chip, int stream, struct aud
> else
> strcpy(pcm->name, "USB Audio");
>
> + preallocate_buffer(chip, pcm, stream);
> init_substream(as, stream, fp);
>
> list_add(&as->list, &chip->pcm_list);
next prev parent reply other threads:[~2010-01-15 3:28 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-26 15:13 [PATCH 0/5] PCM mmap (temporary) fixes for non-coherent architectures Takashi Iwai
2009-11-26 15:13 ` Takashi Iwai
2009-11-26 15:13 ` [PATCH 1/5] ALSA: pcm - Use dma_mmap_coherent() if available Takashi Iwai
2009-11-26 15:13 ` Takashi Iwai
2009-11-26 15:13 ` [PATCH 2/5] ALSA: pcm - define snd_pcm_default_page_ops() Takashi Iwai
2009-11-26 15:13 ` Takashi Iwai
2009-11-26 15:13 ` [PATCH 3/5] ALSA: pcm - fix page conversion on non-coherent MIPS arch Takashi Iwai
2009-11-26 15:13 ` Takashi Iwai
2009-11-26 15:13 ` [PATCH 4/5] ALSA: pcm - fix page conversion on non-coherent PPC arch Takashi Iwai
2009-11-26 15:13 ` Takashi Iwai
2009-11-26 15:13 ` [PATCH 5/5] ALSA: Remove old DMA-mmap code from arm/devdma.c Takashi Iwai
2009-11-26 15:13 ` Takashi Iwai
2009-11-26 16:56 ` [PATCH 4/5] ALSA: pcm - fix page conversion on non-coherent PPC arch Takashi Iwai
2009-11-26 16:56 ` Takashi Iwai
2009-11-26 21:14 ` Benjamin Herrenschmidt
2009-11-26 21:14 ` Benjamin Herrenschmidt
2009-11-26 20:51 ` Benjamin Herrenschmidt
2009-11-26 20:51 ` Benjamin Herrenschmidt
2009-11-27 9:18 ` Takashi Iwai
2009-11-27 9:18 ` Takashi Iwai
2009-11-27 3:52 ` [PATCH 3/5] ALSA: pcm - fix page conversion on non-coherent MIPS arch Wu Zhangjin
2009-11-27 9:26 ` Takashi Iwai
2009-11-27 9:26 ` Takashi Iwai
2009-11-27 8:46 ` Ralf Baechle
2009-11-27 8:46 ` Ralf Baechle
2009-11-27 9:20 ` Takashi Iwai
2009-11-27 9:20 ` Takashi Iwai
2010-01-01 19:31 ` [PATCH 0/5] PCM mmap (temporary) fixes for non-coherent architectures Andreas Mohr
2010-01-12 7:02 ` Takashi Iwai
2010-01-12 7:02 ` Takashi Iwai
2010-01-13 9:07 ` Takashi Iwai
2010-01-13 9:07 ` Takashi Iwai
2010-01-14 7:46 ` Andreas Mohr
2010-01-14 7:46 ` Andreas Mohr
2010-01-14 7:54 ` Takashi Iwai
2010-01-14 7:54 ` Takashi Iwai
2010-01-15 3:28 ` Benjamin Herrenschmidt [this message]
2010-01-15 3:28 ` Benjamin Herrenschmidt
2010-01-15 6:43 ` Takashi Iwai
2010-01-15 6:43 ` Takashi Iwai
2010-01-15 6:50 ` Benjamin Herrenschmidt
2010-01-15 6:50 ` Benjamin Herrenschmidt
2010-01-15 7:32 ` Takashi Iwai
2010-01-15 7:32 ` Takashi Iwai
2010-01-13 9:28 ` Andreas Mohr
2010-01-13 9:28 ` Andreas Mohr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1263526082.724.395.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=alsa-devel@alsa-project.org \
--cc=andi@lisas.de \
--cc=beckyb@kernel.crashing.org \
--cc=galak@gate.crashing.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=tiwai@suse.de \
--cc=tsbogend@alpha.franken.de \
--cc=wuzhangjin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.