* [PATCH 09/10] ARM: LPC32XX: architecture header files
@ 2010-01-27 0:20 Kevin Wells
0 siblings, 0 replies; only message in thread
From: Kevin Wells @ 2010-01-27 0:20 UTC (permalink / raw)
To: linux-arm-kernel
LPC32xx architecture header files
Signed-off-by: Kevin Wells <kevin.wells@nxp.com>
---
arch/arm/mach-lpc32xx/include/mach/board.h | 27 +
arch/arm/mach-lpc32xx/include/mach/clkdev.h | 29 +
arch/arm/mach-lpc32xx/include/mach/gpio.h | 78 +++
arch/arm/mach-lpc32xx/include/mach/hardware.h | 41 ++
arch/arm/mach-lpc32xx/include/mach/i2c.h | 63 ++
arch/arm/mach-lpc32xx/include/mach/io.h | 31 +
arch/arm/mach-lpc32xx/include/mach/irqs.h | 118 ++++
arch/arm/mach-lpc32xx/include/mach/memory.h | 32 +
arch/arm/mach-lpc32xx/include/mach/platform.h | 735
+++++++++++++++++++++++
arch/arm/mach-lpc32xx/include/mach/system.h | 56 ++
arch/arm/mach-lpc32xx/include/mach/timex.h | 33 +
arch/arm/mach-lpc32xx/include/mach/uncompress.h | 114 ++++
arch/arm/mach-lpc32xx/include/mach/vmalloc.h | 28 +
13 files changed, 1385 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-lpc32xx/include/mach/board.h
b/arch/arm/mach-lpc32xx/include/mach/board.h
new file mode 100644
index 0000000..057774a
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/board.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/board.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
+ */
+
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/clkdev.h
b/arch/arm/mach-lpc32xx/include/mach/clkdev.h
new file mode 100644
index 0000000..3dd9d0d
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/clkdev.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/clkdev.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_CLKDEV_H
+#define __ASM_ARCH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h
b/arch/arm/mach-lpc32xx/include/mach/gpio.h
new file mode 100644
index 0000000..8df2198
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/gpio.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * Note!
+ * Muxed GP pins need to be setup to the GP state in the board level
+ * code prior to using this driver.
+ * GPI pins : 28xP3 group
+ * GPO pins : 24xP3 group
+ * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
+ */
+
+#define GPIO_P0_MAX 8
+#define GPIO_P1_MAX 24
+#define GPIO_P2_MAX 13
+#define GPIO_P3_MAX 6
+#define GPI_P3_MAX 28
+#define GPO_P3_MAX 24
+
+#define GPIO_P0_GRP 0
+#define GPIO_P1_GRP (GPIO_P0_GRP + GPIO_P0_MAX)
+#define GPIO_P2_GRP (GPIO_P1_GRP + GPIO_P1_MAX)
+#define GPIO_P3_GRP (GPIO_P2_GRP + GPIO_P2_MAX)
+#define GPI_P3_GRP (GPIO_P3_GRP + GPIO_P3_MAX)
+#define GPO_P3_GRP (GPI_P3_GRP + GPI_P3_MAX)
+
+/*
+ * A specific GPIO can be selected with this macro
+ * ie, GPIO_05 can be selected with LPC32XX_GPIO(GPIO_P3_GRP, 5)
+ * See the LPC32x0 User's guide for GPIO group numbers
+ */
+#define LPC32XX_GPIO(x, y) ((x) + (y))
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return __gpio_to_irq(gpio);
+}
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/hardware.h
b/arch/arm/mach-lpc32xx/include/mach/hardware.h
new file mode 100644
index 0000000..3f4bffa
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/hardware.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/*
+ * Start of virtual addresses for IO devices
+ */
+#define IO_BASE 0xF0000000
+
+#define io_p2v(x) (IO_BASE | (((x) & 0xff000000) >> 4) |\
+ ((x) & 0x000fffff))
+#define io_v2p(x) ((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
+
+/*
+ * This macro relies on fact that for all HW i/o addresses bits 20-23
are 0
+ */
+#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff))
|\
+ IO_BASE)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/i2c.h
b/arch/arm/mach-lpc32xx/include/mach/i2c.h
new file mode 100644
index 0000000..a2d810b
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/i2c.h
@@ -0,0 +1,63 @@
+/*
+ * PNX4008-specific tweaks for I2C IP3204 block
+ *
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether
express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_I2C_H__
+#define __ASM_ARCH_I2C_H__
+
+enum {
+ mstatus_tdi = 0x00000001,
+ mstatus_afi = 0x00000002,
+ mstatus_nai = 0x00000004,
+ mstatus_drmi = 0x00000008,
+ mstatus_active = 0x00000020,
+ mstatus_scl = 0x00000040,
+ mstatus_sda = 0x00000080,
+ mstatus_rff = 0x00000100,
+ mstatus_rfe = 0x00000200,
+ mstatus_tff = 0x00000400,
+ mstatus_tfe = 0x00000800,
+};
+
+enum {
+ mcntrl_tdie = 0x00000001,
+ mcntrl_afie = 0x00000002,
+ mcntrl_naie = 0x00000004,
+ mcntrl_drmie = 0x00000008,
+ mcntrl_daie = 0x00000020,
+ mcntrl_rffie = 0x00000040,
+ mcntrl_tffie = 0x00000080,
+ mcntrl_reset = 0x00000100,
+ mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+ rw_bit = 1 << 0,
+ start_bit = 1 << 8,
+ stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
+#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
+#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
+#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
+#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
+#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed
(RO) */
+#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed
(RO) */
+#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave
FIFO level (RO) */
+
+#define I2C_CHIP_NAME "PNX4008-I2C"
+
+#endif /* __ASM_ARCH_I2C_H___ */
diff --git a/arch/arm/mach-lpc32xx/include/mach/io.h
b/arch/arm/mach-lpc32xx/include/mach/io.h
new file mode 100644
index 0000000..0da8713
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/io.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/io.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h
b/arch/arm/mach-lpc32xx/include/mach/irqs.h
new file mode 100644
index 0000000..157a26c
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/irqs.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_IRQS_H
+#define __ASM_ARM_ARCH_IRQS_H
+
+/*
+ * MIC interrupts
+ */
+#define IRQ_SUB1IRQ 0
+#define IRQ_SUB2IRQ 1
+#define IRQ_PWM3 3
+#define IRQ_PWM4 4
+#define IRQ_HSTIMER 5
+#define IRQ_WATCH 6
+#define IRQ_UART_IIR3 7
+#define IRQ_UART_IIR4 8
+#define IRQ_UART_IIR5 9
+#define IRQ_UART_IIR6 10
+#define IRQ_FLASH 11
+#define IRQ_SD1 13
+#define IRQ_LCD 14
+#define IRQ_SD0 15
+#define IRQ_TIMER0 16
+#define IRQ_TIMER1 17
+#define IRQ_TIMER2 18
+#define IRQ_TIMER3 19
+#define IRQ_SSP0 20
+#define IRQ_SSP1 21
+#define IRQ_I2S0 22
+#define IRQ_I2S1 23
+#define IRQ_UART_IIR7 24
+#define IRQ_UART_IIR2 25
+#define IRQ_UART_IIR1 26
+#define IRQ_MSTIMER 27
+#define IRQ_DMA 28
+#define IRQ_ETHERNET 29
+#define IRQ_SUB1FIQ 30
+#define IRQ_SUB2FIQ 31
+
+/*
+ * SIC1 interrupts start at offset 32
+ */
+#define IRQ_JTAG_COMM_TX (32 + 1)
+#define IRQ_JTAG_COMM_RX (32 + 2)
+#define IRQ_GPI_11 (32 + 4)
+#define IRQ_TS_P (32 + 6)
+#define IRQ_TS_IRQ (32 + 7)
+#define IRQ_TS_AUX (32 + 8)
+#define IRQ_SPI2 (32 + 12)
+#define IRQ_PLLUSB (32 + 13)
+#define IRQ_PLLHCLK (32 + 14)
+#define IRQ_PLL397 (32 + 17)
+#define IRQ_I2C_2 (32 + 18)
+#define IRQ_I2C_1 (32 + 19)
+#define IRQ_RTC (32 + 20)
+#define IRQ_KEY (32 + 22)
+#define IRQ_SPI1 (32 + 23)
+#define IRQ_SW (32 + 24)
+#define IRQ_USB_OTG_TIMER (32 + 25)
+#define IRQ_USB_OTG_ATX (32 + 26)
+#define IRQ_USB_HOST (32 + 27)
+#define IRQ_USB_DEV_DMA (32 + 28)
+#define IRQ_USB_DEV_LP (32 + 29)
+#define IRQ_USB_DEV_HP (32 + 30)
+#define IRQ_USB_I2C (32 + 31)
+
+/*
+ * SIC2 interrupts start at offset 64
+ */
+#define IRQ_GPIO_00 (64 + 0)
+#define IRQ_GPIO_01 (64 + 1)
+#define IRQ_GPIO_02 (64 + 2)
+#define IRQ_GPIO_03 (64 + 3)
+#define IRQ_GPIO_04 (64 + 4)
+#define IRQ_GPIO_05 (64 + 5)
+#define IRQ_SPI2_DATAIN (64 + 6)
+#define IRQ_U2_HCTS (64 + 7)
+#define IRQ_P0_P1_IRQ (64 + 8)
+#define IRQ_GPI_08 (64 + 9)
+#define IRQ_GPI_09 (64 + 10)
+#define IRQ_GPI_10 (64 + 11)
+#define IRQ_U7_HCTS (64 + 12)
+#define IRQ_GPI_07 (64 + 15)
+#define IRQ_SDIO (64 + 18)
+#define IRQ_U5_RX (64 + 19)
+#define IRQ_SPI1_DATAIN (64 + 20)
+#define IRQ_GPI_00 (64 + 22)
+#define IRQ_GPI_01 (64 + 23)
+#define IRQ_GPI_02 (64 + 24)
+#define IRQ_GPI_03 (64 + 25)
+#define IRQ_GPI_04 (64 + 26)
+#define IRQ_GPI_05 (64 + 27)
+#define IRQ_GPI_06 (64 + 28)
+#define IRQ_SYSCLK (64 + 31)
+
+#define NR_IRQS 96
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h
b/arch/arm/mach-lpc32xx/include/mach/memory.h
new file mode 100644
index 0000000..b246973
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/memory.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/memory.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset of bank 0
+ */
+#define PHYS_OFFSET UL(0x80000000)
+
+#endif
+
diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h
b/arch/arm/mach-lpc32xx/include/mach/platform.h
new file mode 100644
index 0000000..48305a5
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/platform.h
@@ -0,0 +1,735 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/platform.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_PLATFORM_H
+#define __ASM_ARCH_PLATFORM_H
+
+#define _SBF(f, v) (((v)) << (f))
+#define _BIT(n) (1 << (n))
+
+/*
+ * AHB 0 physical base addresses
+ */
+#define SLC_BASE 0x20020000
+#define SSP0_BASE 0x20084000
+#define SPI1_BASE 0x20088000
+#define SSP1_BASE 0x2008C000
+#define SPI2_BASE 0x20090000
+#define I2S0_BASE 0x20094000
+#define SD_BASE 0x20098000
+#define I2S1_BASE 0x2009C000
+#define MLC_BASE 0x200A8000
+#define AHB0_START SLC_BASE
+#define AHB0_SIZE ((MLC_BASE - SLC_BASE) + SZ_4K)
+
+/*
+ * AHB 1 physical base addresses
+ */
+#define DMA_BASE 0x31000000
+#define USB_BASE 0x31020000
+#define USBH_BASE 0x31020000
+#define USB_OTG_BASE 0x31020000
+#define OTG_I2C_BASE 0x31020300
+#define LCD_BASE 0x31040000
+#define ETHERNET_BASE 0x31060000
+#define EMC_BASE 0x31080000
+#define ETB_CFG_BASE 0x310C0000
+#define ETB_DATA_BASE 0x310E0000
+#define AHB1_START DMA_BASE
+#define AHB1_SIZE ((EMC_BASE - DMA_BASE) + SZ_4K)
+
+/*
+ * FAB physical base addresses
+ */
+#define CLK_PM_BASE 0x40004000
+#define MIC_BASE 0x40008000
+#define SIC1_BASE 0x4000C000
+#define SIC2_BASE 0x40010000
+#define HS_UART1_BASE 0x40014000
+#define HS_UART2_BASE 0x40018000
+#define HS_UART7_BASE 0x4001C000
+#define RTC_BASE 0x40024000
+#define RTC_RAM_BASE 0x40024080
+#define GPIO_BASE 0x40028000
+#define PWM3_BASE 0x4002C000
+#define PWM4_BASE 0x40030000
+#define MSTIM_BASE 0x40034000
+#define HSTIM_BASE 0x40038000
+#define WDTIM_BASE 0x4003C000
+#define DEBUG_CTRL_BASE 0x40040000
+#define TIMER0_BASE 0x40044000
+#define ADC_BASE 0x40048000
+#define TIMER1_BASE 0x4004C000
+#define KSCAN_BASE 0x40050000
+#define UART_CTRL_BASE 0x40054000
+#define TIMER2_BASE 0x40058000
+#define PWM1_BASE 0x4005C000
+#define PWM2_BASE 0x4005C004
+#define TIMER3_BASE 0x40060000
+
+/*
+ * APB physical base addresses
+ */
+
+#define UART3_BASE 0x40080000
+#define UART4_BASE 0x40088000
+#define UART5_BASE 0x40090000
+#define UART6_BASE 0x40098000
+#define I2C1_BASE 0x400A0000
+#define I2C2_BASE 0x400A8000
+
+/*
+ * FAB and APB base and sizing
+ */
+#define FABAPB_START CLK_PM_BASE
+#define FABAPB_SIZE ((I2C2_BASE - CLK_PM_BASE) +
SZ_4K)
+
+/*
+ * Internal memory Bases
+ */
+#define IRAM_BASE 0x08000000
+#define IROM_BASE 0x0C000000
+
+/*
+ * External Static Memory Bank Address Space Bases
+ */
+#define EMC_CS0_BASE 0xE0000000
+#define EMC_CS1_BASE 0xE1000000
+#define EMC_CS2_BASE 0xE2000000
+#define EMC_CS3_BASE 0xE3000000
+
+/*
+ * External SDRAM Memory Bank Address Space Bases
+ */
+#define EMC_DYCS0_BASE 0x80000000
+#define EMC_DYCS1_BASE 0xA0000000
+
+/*
+ * Clock and crystal information
+ */
+#define MAIN_OSC_FREQ 13000000
+#define CLOCK_OSC_FREQ 32768
+
+/*
+ * IRAM size
+*/
+#define LPC32XX_IRAM_SIZE CONFIG_ARCH_LPC32XX_IRAM_SIZE
+
+/*
+ * Clock and Power control register offsets
+ */
+#define CLKPWR_DEBUG_CTRL(x) ((x) + 0x000)
+#define CLKPWR_BOOTMAP(x) ((x) + 0x014)
+#define CLKPWR_P01_ER(x) ((x) + 0x018)
+#define CLKPWR_USBCLK_PDIV(x) ((x) + 0x01C)
+#define CLKPWR_INT_ER(x) ((x) + 0x020)
+#define CLKPWR_INT_RS(x) ((x) + 0x024)
+#define CLKPWR_INT_SR(x) ((x) + 0x028)
+#define CLKPWR_INT_AP(x) ((x) + 0x02C)
+#define CLKPWR_PIN_ER(x) ((x) + 0x030)
+#define CLKPWR_PIN_RS(x) ((x) + 0x034)
+#define CLKPWR_PIN_SR(x) ((x) + 0x038)
+#define CLKPWR_PIN_AP(x) ((x) + 0x03C)
+#define CLKPWR_HCLK_DIV(x) ((x) + 0x040)
+#define CLKPWR_PWR_CTRL(x) ((x) + 0x044)
+#define CLKPWR_PLL397_CTRL(x) ((x) + 0x048)
+#define CLKPWR_MAIN_OSC_CTRL(x) ((x) + 0x04C)
+#define CLKPWR_SYSCLK_CTRL(x) ((x) + 0x050)
+#define CLKPWR_LCDCLK_CTRL(x) ((x) + 0x054)
+#define CLKPWR_HCLKPLL_CTRL(x) ((x) + 0x058)
+#define CLKPWR_ADC_CLK_CTRL_1(x) ((x) + 0x060)
+#define CLKPWR_USB_CTRL(x) ((x) + 0x064)
+#define CLKPWR_SDRAMCLK_CTRL(x) ((x) + 0x068)
+#define CLKPWR_DDR_LAP_NOM(x) ((x) + 0x06C)
+#define CLKPWR_DDR_LAP_COUNT(x) ((x) + 0x070)
+#define CLKPWR_DDR_LAP_DELAY(x) ((x) + 0x074)
+#define CLKPWR_SSP_CLK_CTRL(x) ((x) + 0x078)
+#define CLKPWR_I2S_CLK_CTRL(x) ((x) + 0x07C)
+#define CLKPWR_MS_CTRL(x) ((x) + 0x080)
+#define CLKPWR_MACCLK_CTRL(x) ((x) + 0x090)
+#define CLKPWR_TEST_CLK_SEL(x) ((x) + 0x0A4)
+#define CLKPWR_SFW_INT(x) ((x) + 0x0A8)
+#define CLKPWR_I2C_CLK_CTRL(x) ((x) + 0x0AC)
+#define CLKPWR_KEY_CLK_CTRL(x) ((x) + 0x0B0)
+#define CLKPWR_ADC_CLK_CTRL(x) ((x) + 0x0B4)
+#define CLKPWR_PWM_CLK_CTRL(x) ((x) + 0x0B8)
+#define CLKPWR_TIMER_CLK_CTRL(x) ((x) + 0x0BC)
+#define CLKPWR_TIMERS_PWMS_CLK_CTRL_1(x) ((x) + 0x0C0)
+#define CLKPWR_SPI_CLK_CTRL(x) ((x) + 0x0C4)
+#define CLKPWR_NAND_CLK_CTRL(x) ((x) + 0x0C8)
+#define CLKPWR_UART3_CLK_CTRL(x) ((x) + 0x0D0)
+#define CLKPWR_UART4_CLK_CTRL(x) ((x) + 0x0D4)
+#define CLKPWR_UART5_CLK_CTRL(x) ((x) + 0x0D8)
+#define CLKPWR_UART6_CLK_CTRL(x) ((x) + 0x0DC)
+#define CLKPWR_IRDA_CLK_CTRL(x) ((x) + 0x0E0)
+#define CLKPWR_UART_CLK_CTRL(x) ((x) + 0x0E4)
+#define CLKPWR_DMA_CLK_CTRL(x) ((x) + 0x0E8)
+#define CLKPWR_AUTOCLOCK(x) ((x) + 0x0EC)
+#define CLKPWR_DEVID(x, y) ((x) + 0x130 + (y))
+
+/*
+ * clkpwr_debug_ctrl register definitions
+*/
+#define CLKPWR_VFP_CLOCK_ENABLE_BIT _BIT(4)
+
+/*
+ * clkpwr_bootmap register definitions
+ */
+#define CLKPWR_BOOTMAP_SEL_BIT _BIT(1)
+
+/*
+ * clkpwr_start_gpio register bit definitions
+ */
+#define CLKPWR_GPIOSRC_P1IO23_BIT _BIT(31)
+#define CLKPWR_GPIOSRC_P1IO22_BIT _BIT(30)
+#define CLKPWR_GPIOSRC_P1IO21_BIT _BIT(29)
+#define CLKPWR_GPIOSRC_P1IO20_BIT _BIT(28)
+#define CLKPWR_GPIOSRC_P1IO19_BIT _BIT(27)
+#define CLKPWR_GPIOSRC_P1IO18_BIT _BIT(26)
+#define CLKPWR_GPIOSRC_P1IO17_BIT _BIT(25)
+#define CLKPWR_GPIOSRC_P1IO16_BIT _BIT(24)
+#define CLKPWR_GPIOSRC_P1IO15_BIT _BIT(23)
+#define CLKPWR_GPIOSRC_P1IO14_BIT _BIT(22)
+#define CLKPWR_GPIOSRC_P1IO13_BIT _BIT(21)
+#define CLKPWR_GPIOSRC_P1IO12_BIT _BIT(20)
+#define CLKPWR_GPIOSRC_P1IO11_BIT _BIT(19)
+#define CLKPWR_GPIOSRC_P1IO10_BIT _BIT(18)
+#define CLKPWR_GPIOSRC_P1IO9_BIT _BIT(17)
+#define CLKPWR_GPIOSRC_P1IO8_BIT _BIT(16)
+#define CLKPWR_GPIOSRC_P1IO7_BIT _BIT(15)
+#define CLKPWR_GPIOSRC_P1IO6_BIT _BIT(14)
+#define CLKPWR_GPIOSRC_P1IO5_BIT _BIT(13)
+#define CLKPWR_GPIOSRC_P1IO4_BIT _BIT(12)
+#define CLKPWR_GPIOSRC_P1IO3_BIT _BIT(11)
+#define CLKPWR_GPIOSRC_P1IO2_BIT _BIT(10)
+#define CLKPWR_GPIOSRC_P1IO1_BIT _BIT(9)
+#define CLKPWR_GPIOSRC_P1IO0_BIT _BIT(8)
+#define CLKPWR_GPIOSRC_P0IO7_BIT _BIT(7)
+#define CLKPWR_GPIOSRC_P0IO6_BIT _BIT(6)
+#define CLKPWR_GPIOSRC_P0IO5_BIT _BIT(5)
+#define CLKPWR_GPIOSRC_P0IO4_BIT _BIT(4)
+#define CLKPWR_GPIOSRC_P0IO3_BIT _BIT(3)
+#define CLKPWR_GPIOSRC_P0IO2_BIT _BIT(2)
+#define CLKPWR_GPIOSRC_P0IO1_BIT _BIT(1)
+#define CLKPWR_GPIOSRC_P0IO0_BIT _BIT(0)
+
+/*
+ * clkpwr_usbclk_pdiv register definitions
+ */
+#define CLKPWR_SET_PLL_USBPDIV(n) ((n) & 0xF)
+#define CLKPWR_USBPDIV_PLL_MASK 0xF
+
+/*
+ * clkpwr_start_int, clkpwr_start_raw_sts_int, clkpwr_start_sts_int,
+ * clkpwr_start_pol_int, register bit definitions
+ */
+#define CLKPWR_INTSRC_ADC_BIT _BIT(31)
+#define CLKPWR_INTSRC_TS_P_BIT _BIT(30)
+#define CLKPWR_INTSRC_TS_AUX_BIT _BIT(29)
+#define CLKPWR_INTSRC_USBAHNEEDCLK_BIT _BIT(26)
+#define CLKPWR_INTSRC_MSTIMER_BIT _BIT(25)
+#define CLKPWR_INTSRC_RTC_BIT _BIT(24)
+#define CLKPWR_INTSRC_USBNEEDCLK_BIT _BIT(23)
+#define CLKPWR_INTSRC_USB_BIT _BIT(22)
+#define CLKPWR_INTSRC_I2C_BIT _BIT(21)
+#define CLKPWR_INTSRC_USBOTGTIMER_BIT _BIT(20)
+#define CLKPWR_INTSRC_USBATXINT_BIT _BIT(19)
+#define CLKPWR_INTSRC_KEY_BIT _BIT(16)
+#define CLKPWR_INTSRC_MAC_BIT _BIT(7)
+#define CLKPWR_INTSRC_P0P1_BIT _BIT(6)
+#define CLKPWR_INTSRC_GPIO_05_BIT _BIT(5)
+#define CLKPWR_INTSRC_GPIO_04_BIT _BIT(4)
+#define CLKPWR_INTSRC_GPIO_03_BIT _BIT(3)
+#define CLKPWR_INTSRC_GPIO_02_BIT _BIT(2)
+#define CLKPWR_INTSRC_GPIO_01_BIT _BIT(1)
+#define CLKPWR_INTSRC_GPIO_00_BIT _BIT(0)
+
+/*
+ * clkpwr_start_pin, clkpwr_start_raw_sts_pin, clkpwr_start_sts_pin,
+ * clkpwr_start_pol_pin register bit definitions
+ */
+#define CLKPWR_EXTSRC_U7_RX_BIT _BIT(31)
+#define CLKPWR_EXTSRC_U7_HCTS_BIT _BIT(30)
+#define CLKPWR_EXTSRC_U6_IRRX_BIT _BIT(28)
+#define CLKPWR_EXTSRC_U5_RX_BIT _BIT(26)
+#define CLKPWR_EXTSRC_GPI_11_BIT _BIT(25)
+#define CLKPWR_EXTSRC_U3_RX_BIT _BIT(24)
+#define CLKPWR_EXTSRC_U2_HCTS_BIT _BIT(23)
+#define CLKPWR_EXTSRC_U2_RX_BIT _BIT(22)
+#define CLKPWR_EXTSRC_U1_RX_BIT _BIT(21)
+#define CLKPWR_EXTSRC_MSDIO_INT_BIT _BIT(18)
+#define CLKPWR_EXTSRC_MSDIO_SRT_BIT _BIT(17)
+#define CLKPWR_EXTSRC_GPIO_O6_BIT _BIT(16)
+#define CLKPWR_EXTSRC_GPIO_O5_BIT _BIT(15)
+#define CLKPWR_EXTSRC_GPIO_O4_BIT _BIT(14)
+#define CLKPWR_EXTSRC_GPIO_O3_BIT _BIT(13)
+#define CLKPWR_EXTSRC_GPIO_O2_BIT _BIT(12)
+#define CLKPWR_EXTSRC_GPIO_O1_BIT _BIT(11)
+#define CLKPWR_EXTSRC_GPIO_O0_BIT _BIT(10)
+#define CLKPWR_EXTSRC_SYSCLKEN_BIT _BIT(9)
+#define CLKPWR_EXTSRC_SPI1_DATIN_BIT _BIT(8)
+#define CLKPWR_EXTSRC_GPIO_O7_BIT _BIT(7)
+#define CLKPWR_EXTSRC_SPI2_DATIN_BIT _BIT(6)
+#define CLKPWR_EXTSRC_GPIO_19_BIT _BIT(5)
+#define CLKPWR_EXTSRC_GPIO_O9_BIT _BIT(4)
+#define CLKPWR_EXTSRC_GPIO_O8_BIT _BIT(3)
+
+/*
+ * clkpwr_hclk_div register definitions
+ */
+#define CLKPWR_HCLKDIV_DDRCLK_STOP (0x0 << 7)
+#define CLKPWR_HCLKDIV_DDRCLK_NORM (0x1 << 7)
+#define CLKPWR_HCLKDIV_DDRCLK_HALF (0x2 << 7)
+#define CLKPWR_HCLKDIV_PCLK_DIV(n) (((n) & 0x1F) << 2)
+#define CLKPWR_HCLKDIV_DIV_2POW(n) ((n) & 0x3)
+
+/*
+ * clkpwr_pwr_ctrl register definitions
+ */
+#define CLKPWR_CTRL_FORCE_PCLK _BIT(10)
+#define CLKPWR_SDRAM_SELF_RFSH _BIT(9)
+#define CLKPWR_UPD_SDRAM_SELF_RFSH _BIT(8)
+#define CLKPWR_AUTO_SDRAM_SELF_RFSH _BIT(7)
+#define CLKPWR_HIGHCORE_STATE_BIT _BIT(5)
+#define CLKPWR_SYSCLKEN_STATE_BIT _BIT(4)
+#define CLKPWR_SYSCLKEN_GPIO_EN _BIT(3)
+#define CLKPWR_SELECT_RUN_MODE _BIT(2)
+#define CLKPWR_HIGHCORE_GPIO_EN _BIT(1)
+#define CLKPWR_STOP_MODE_CTRL _BIT(0)
+
+/*
+ * clkpwr_pll397_ctrl register definitions
+ */
+#define CLKPWR_PLL397_MSLOCK_STS _BIT(10)
+#define CLKPWR_PLL397_BYPASS _BIT(9)
+#define CLKPWR_PLL397_BIAS_NORM 0x000
+#define CLKPWR_PLL397_BIAS_N12_5 0x040
+#define CLKPWR_PLL397_BIAS_N25 0x080
+#define CLKPWR_PLL397_BIAS_N37_5 0x0C0
+#define CLKPWR_PLL397_BIAS_P12_5 0x100
+#define CLKPWR_PLL397_BIAS_P25 0x140
+#define CLKPWR_PLL397_BIAS_P37_5 0x180
+#define CLKPWR_PLL397_BIAS_P50 0x1C0
+#define CLKPWR_PLL397_BIAS_MASK 0x1C0
+#define CLKPWR_SYSCTRL_PLL397_DIS _BIT(1)
+#define CLKPWR_SYSCTRL_PLL397_STS _BIT(0)
+
+/*
+ * clkpwr_main_osc_ctrl register definitions
+ */
+#define CLKPWR_MOSC_ADD_CAP(n) (((n) & 0x7F) << 2)
+#define CLKPWR_MOSC_CAP_MASK (0x7F << 2)
+#define CLKPWR_TEST_MODE _BIT(1)
+#define CLKPWR_MOSC_DISABLE _BIT(0)
+
+/*
+ * clkpwr_sysclk_ctrl register definitions
+ */
+#define CLKPWR_SYSCTRL_BP_TRIG(n) (((n) & 0x3FF) << 2)
+#define CLKPWR_SYSCTRL_BP_MASK (0x3FF << 2)
+#define CLKPWR_SYSCTRL_USEPLL397 _BIT(1)
+#define CLKPWR_SYSCTRL_SYSCLKMUX _BIT(0)
+
+/*
+ * clkpwr_lcdclk_ctrl register definitions
+ */
+#define CLKPWR_LCDCTRL_LCDTYPE_TFT12 0x000
+#define CLKPWR_LCDCTRL_LCDTYPE_TFT16 0x040
+#define CLKPWR_LCDCTRL_LCDTYPE_TFT15 0x080
+#define CLKPWR_LCDCTRL_LCDTYPE_TFT24 0x0C0
+#define CLKPWR_LCDCTRL_LCDTYPE_STN4M 0x100
+#define CLKPWR_LCDCTRL_LCDTYPE_STN8C 0x140
+#define CLKPWR_LCDCTRL_LCDTYPE_DSTN4M 0x180
+#define CLKPWR_LCDCTRL_LCDTYPE_DSTN8C 0x1C0
+#define CLKPWR_LCDCTRL_LCDTYPE_MSK 0x01C0
+#define CLKPWR_LCDCTRL_CLK_EN 0x020
+#define CLKPWR_LCDCTRL_SET_PSCALE(n) ((n - 1) & 0x1F)
+#define CLKPWR_LCDCTRL_PSCALE_MSK 0x001F
+
+/*
+ * clkpwr_hclkpll_ctrl register definitions
+ */
+#define CLKPWR_HCLKPLL_POWER_UP _BIT(16)
+#define CLKPWR_HCLKPLL_CCO_BYPASS _BIT(15)
+#define CLKPWR_HCLKPLL_POSTDIV_BYPASS _BIT(14)
+#define CLKPWR_HCLKPLL_FDBK_SEL_FCLK _BIT(13)
+#define CLKPWR_HCLKPLL_POSTDIV_2POW(n) (((n) & 0x3) << 11)
+#define CLKPWR_HCLKPLL_PREDIV_PLUS1(n) (((n) & 0x3) << 9)
+#define CLKPWR_HCLKPLL_PLLM(n) (((n) & 0xFF) << 1)
+#define CLKPWR_HCLKPLL_PLL_STS _BIT(0)
+
+/*
+ * clkpwr_adc_clk_ctrl_1 register definitions
+ */
+#define CLKPWR_ADCCTRL1_RTDIV(n) (((n) & 0xFF) << 0)
+#define CLKPWR_ADCCTRL1_PCLK_SEL _BIT(8)
+
+/*
+ * clkpwr_usb_ctrl register definitions
+ */
+#define CLKPWR_USBCTRL_HCLK_EN _BIT(24)
+#define CLKPWR_USBCTRL_USBI2C_EN _BIT(23)
+#define CLKPWR_USBCTRL_USBDVND_EN _BIT(22)
+#define CLKPWR_USBCTRL_USBHSTND_EN _BIT(21)
+#define CLKPWR_USBCTRL_PU_ADD (0x0 << 19)
+#define CLKPWR_USBCTRL_BUS_KEEPER (0x1 << 19)
+#define CLKPWR_USBCTRL_PD_ADD (0x3 << 19)
+#define CLKPWR_USBCTRL_CLK_EN2 _BIT(18)
+#define CLKPWR_USBCTRL_CLK_EN1 _BIT(17)
+#define CLKPWR_USBCTRL_PLL_PWRUP _BIT(16)
+#define CLKPWR_USBCTRL_CCO_BYPASS _BIT(15)
+#define CLKPWR_USBCTRL_POSTDIV_BYPASS _BIT(14)
+#define CLKPWR_USBCTRL_FDBK_SEL_FCLK _BIT(13)
+#define CLKPWR_USBCTRL_POSTDIV_2POW(n) (((n) & 0x3) << 11)
+#define CLKPWR_USBCTRL_PREDIV_PLUS1(n) (((n) & 0x3) << 9)
+#define CLKPWR_USBCTRL_FDBK_PLUS1(n) (((n) & 0xFF) << 1)
+#define CLKPWR_USBCTRL_PLL_STS _BIT(0)
+
+/*
+ * clkpwr_sdramclk_ctrl register definitions
+ */
+#define CLKPWR_SDRCLK_FASTSLEW_CLK _BIT(22)
+#define CLKPWR_SDRCLK_FASTSLEW _BIT(21)
+#define CLKPWR_SDRCLK_FASTSLEW_DAT _BIT(20)
+#define CLKPWR_SDRCLK_SW_DDR_RESET _BIT(19)
+#define CLKPWR_SDRCLK_HCLK_DLY(n) (((n) & 0x1F) << 14)
+#define CLKPWR_SDRCLK_DLY_ADDR_STS _BIT(13)
+#define CLKPWR_SDRCLK_SENS_FACT(n) (((n) & 0x7) << 10)
+#define CLKPWR_SDRCLK_USE_CAL _BIT(9)
+#define CLKPWR_SDRCLK_DO_CAL _BIT(8)
+#define CLKPWR_SDRCLK_CAL_ON_RTC _BIT(7)
+#define CLKPWR_SDRCLK_DQS_DLY(n) (((n) & 0x1F) << 2)
+#define CLKPWR_SDRCLK_USE_DDR _BIT(1)
+#define CLKPWR_SDRCLK_CLK_DIS _BIT(0)
+
+/*
+ * clkpwr_ssp_blk_ctrl register definitions
+ */
+#define CLKPWR_SSPCTRL_DMA_SSP1RX _BIT(5)
+#define CLKPWR_SSPCTRL_DMA_SSP1TX _BIT(4)
+#define CLKPWR_SSPCTRL_DMA_SSP0RX _BIT(3)
+#define CLKPWR_SSPCTRL_DMA_SSP0TX _BIT(2)
+#define CLKPWR_SSPCTRL_SSPCLK1_EN _BIT(1)
+#define CLKPWR_SSPCTRL_SSPCLK0_EN _BIT(0)
+
+/*
+ * clkpwr_i2s_clk_ctrl register definitions
+ */
+#define CLKPWR_I2SCTRL_I2S1_RX_FOR_TX _BIT(6)
+#define CLKPWR_I2SCTRL_I2S1_TX_FOR_RX _BIT(5)
+#define CLKPWR_I2SCTRL_I2S1_USE_DMA _BIT(4)
+#define CLKPWR_I2SCTRL_I2S0_RX_FOR_TX _BIT(3)
+#define CLKPWR_I2SCTRL_I2S0_TX_FOR_RX _BIT(2)
+#define CLKPWR_I2SCTRL_I2SCLK1_EN _BIT(1)
+#define CLKPWR_I2SCTRL_I2SCLK0_EN _BIT(0)
+
+/*
+ * clkpwr_ms_ctrl register definitions
+ */
+#define CLKPWR_MSCARD_MSDIO_PIN_DIS _BIT(10)
+#define CLKPWR_MSCARD_MSDIO_PU_EN _BIT(9)
+#define CLKPWR_MSCARD_MSDIO23_DIS _BIT(8)
+#define CLKPWR_MSCARD_MSDIO1_DIS _BIT(7)
+#define CLKPWR_MSCARD_MSDIO0_DIS _BIT(6)
+#define CLKPWR_MSCARD_SDCARD_EN _BIT(5)
+#define CLKPWR_MSCARD_SDCARD_DIV(n) ((n) & 0xF)
+
+/*
+ * clkpwr_macclk_ctrl register definitions
+ */
+#define CLKPWR_MACCTRL_NO_ENET_PIS 0x00
+#define CLKPWR_MACCTRL_USE_MII_PINS 0x08
+#define CLKPWR_MACCTRL_USE_RMII_PINS 0x18
+#define CLKPWR_MACCTRL_PINS_MSK 0x18
+#define CLKPWR_MACCTRL_DMACLK_EN _BIT(2)
+#define CLKPWR_MACCTRL_MMIOCLK_EN _BIT(1)
+#define CLKPWR_MACCTRL_HRCCLK_EN _BIT(0)
+
+/*
+ * clkpwr_test_clk_sel register definitions
+ */
+#define CLKPWR_TESTCLK1_SEL_PERCLK (0x0 << 5)
+#define CLKPWR_TESTCLK1_SEL_RTC (0x1 << 5)
+#define CLKPWR_TESTCLK1_SEL_MOSC (0x2 << 5)
+#define CLKPWR_TESTCLK1_SEL_MASK (0x3 << 5)
+#define CLKPWR_TESTCLK_TESTCLK1_EN _BIT(4)
+#define CLKPWR_TESTCLK2_SEL_HCLK (0x0 << 1)
+#define CLKPWR_TESTCLK2_SEL_PERCLK (0x1 << 1)
+#define CLKPWR_TESTCLK2_SEL_USBCLK (0x2 << 1)
+#define CLKPWR_TESTCLK2_SEL_MOSC (0x5 << 1)
+#define CLKPWR_TESTCLK2_SEL_PLL397 (0x7 << 1)
+#define CLKPWR_TESTCLK2_SEL_MASK (0x7 << 1)
+#define CLKPWR_TESTCLK_TESTCLK2_EN _BIT(0)
+
+/*
+ * clkpwr_sw_int register definitions
+ */
+#define CLKPWR_SW_INT(n) (_BIT(0) | (((n) & 0x7F) << 1))
+#define CLKPWR_SW_GET_ARG(n) (((n) & 0xFE) >> 1)
+
+/*
+ * clkpwr_i2c_clk_ctrl register definitions
+ */
+#define CLKPWR_I2CCLK_USBI2CHI_DRIVE _BIT(4)
+#define CLKPWR_I2CCLK_I2C2HI_DRIVE _BIT(3)
+#define CLKPWR_I2CCLK_I2C1HI_DRIVE _BIT(2)
+#define CLKPWR_I2CCLK_I2C2CLK_EN _BIT(1)
+#define CLKPWR_I2CCLK_I2C1CLK_EN _BIT(0)
+
+/*
+ * clkpwr_key_clk_ctrl register definitions
+ */
+#define CLKPWR_KEYCLKCTRL_CLK_EN 0x1
+
+/*
+ * clkpwr_adc_clk_ctrl register definitions
+ */
+#define CLKPWR_ADC32CLKCTRL_CLK_EN 0x1
+
+/*
+ * clkpwr_pwm_clk_ctrl register definitions
+ */
+#define CLKPWR_PWMCLK_PWM2_DIV(n) (((n) & 0xF) << 8)
+#define CLKPWR_PWMCLK_PWM1_DIV(n) (((n) & 0xF) << 4)
+#define CLKPWR_PWMCLK_PWM2SEL_PCLK 0x8
+#define CLKPWR_PWMCLK_PWM2CLK_EN 0x4
+#define CLKPWR_PWMCLK_PWM1SEL_PCLK 0x2
+#define CLKPWR_PWMCLK_PWM1CLK_EN 0x1
+
+/*
+ * clkpwr_timer_clk_ctrl register definitions
+ */
+#define CLKPWR_PWMCLK_HSTIMER_EN 0x2
+#define CLKPWR_PWMCLK_WDOG_EN 0x1
+
+/*
+ * clkpwr_timers_pwms_clk_ctrl_1 register definitions
+ */
+#define CLKPWR_TMRPWMCLK_TIMER3_EN 0x20
+#define CLKPWR_TMRPWMCLK_TIMER2_EN 0x10
+#define CLKPWR_TMRPWMCLK_TIMER1_EN 0x08
+#define CLKPWR_TMRPWMCLK_TIMER0_EN 0x04
+#define CLKPWR_TMRPWMCLK_PWM4_EN 0x02
+#define CLKPWR_TMRPWMCLK_PWM3_EN 0x01
+
+/*
+ * clkpwr_spi_clk_ctrl register definitions
+ */
+#define CLKPWR_SPICLK_SET_SPI2DATIO 0x80
+#define CLKPWR_SPICLK_SET_SPI2CLK 0x40
+#define CLKPWR_SPICLK_USE_SPI2 0x20
+#define CLKPWR_SPICLK_SPI2CLK_EN 0x10
+#define CLKPWR_SPICLK_SET_SPI1DATIO 0x08
+#define CLKPWR_SPICLK_SET_SPI1CLK 0x04
+#define CLKPWR_SPICLK_USE_SPI1 0x02
+#define CLKPWR_SPICLK_SPI1CLK_EN 0x01
+
+/*
+ * clkpwr_nand_clk_ctrl register definitions
+ */
+#define CLKPWR_NANDCLK_INTSEL_MLC 0x20
+#define CLKPWR_NANDCLK_DMA_RNB 0x10
+#define CLKPWR_NANDCLK_DMA_INT 0x08
+#define CLKPWR_NANDCLK_SEL_SLC 0x04
+#define CLKPWR_NANDCLK_MLCCLK_EN 0x02
+#define CLKPWR_NANDCLK_SLCCLK_EN 0x01
+
+/*
+ * clkpwr_uart3_clk_ctrl, clkpwr_uart4_clk_ctrl, clkpwr_uart5_clk_ctrl
+ * and clkpwr_uart6_clk_ctrl register definitions
+ */
+#define CLKPWR_UART_Y_DIV(y) ((y) & 0xFF)
+#define CLKPWR_UART_X_DIV(x) (((x) & 0xFF) << 8)
+#define CLKPWR_UART_USE_HCLK _BIT(16)
+
+/*
+ * clkpwr_irda_clk_ctrl register definitions
+ */
+#define CLKPWR_IRDA_Y_DIV(y) ((y) & 0xFF)
+#define CLKPWR_IRDA_X_DIV(x) (((x) & 0xFF) << 8)
+
+/*
+ * clkpwr_uart_clk_ctrl register definitions
+ */
+#define CLKPWR_UARTCLKCTRL_UART6_EN _BIT(3)
+#define CLKPWR_UARTCLKCTRL_UART5_EN _BIT(2)
+#define CLKPWR_UARTCLKCTRL_UART4_EN _BIT(1)
+#define CLKPWR_UARTCLKCTRL_UART3_EN _BIT(0)
+
+/*
+ * clkpwr_dmaclk_ctrl register definitions
+ */
+#define CLKPWR_DMACLKCTRL_CLK_EN 0x1
+
+/*
+ * clkpwr_autoclock register definitions
+ */
+#define CLKPWR_AUTOCLK_USB_EN 0x40
+#define CLKPWR_AUTOCLK_IRAM_EN 0x02
+#define CLKPWR_AUTOCLK_IROM_EN 0x01
+
+/*
+ * Interrupt controller register offsets
+ */
+#define INTC_MASK 0x00
+#define INTC_RAW_STAT 0x04
+#define INTC_STAT 0x08
+#define INTC_POLAR 0x0C
+#define INTC_ACT_TYPE 0x10
+#define INTC_TYPE 0x14
+
+/*
+ *
+ * Timer/counter register offsets
+ *
+ */
+#define TIMER_IR(x) ((x) + 0x00)
+#define TIMER_TCR(x) ((x) + 0x04)
+#define TIMER_TC(x) ((x) + 0x08)
+#define TIMER_PR(x) ((x) + 0x0C)
+#define TIMER_PC(x) ((x) + 0x10)
+#define TIMER_MCR(x) ((x) + 0x14)
+#define TIMER_MR0(x) ((x) + 0x18)
+#define TIMER_MR1(x) ((x) + 0x1C)
+#define TIMER_MR2(x) ((x) + 0x20)
+#define TIMER_MR3(x) ((x) + 0x24)
+#define TIMER_CCR(x) ((x) + 0x28)
+#define TIMER_CR0(x) ((x) + 0x2C)
+#define TIMER_CR1(x) ((x) + 0x30)
+#define TIMER_CR2(x) ((x) + 0x34)
+#define TIMER_CR3(x) ((x) + 0x38)
+#define TIMER_EMR(x) ((x) + 0x3C)
+#define TIMER_CTCR(x) ((x) + 0x70)
+
+/*
+ * ir register definitions
+ */
+#define TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3))
+#define TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3)))
+
+/*
+ * tcr register definitions
+ */
+#define TIMER_CNTR_TCR_EN 0x1
+#define TIMER_CNTR_TCR_RESET 0x2
+
+/*
+ * mcr register definitions
+ */
+#define TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3))
+#define TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1))
+#define TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2))
+
+/*
+ *
+ * Standard UART register offsets
+ *
+ */
+#define UART_DLL_FIFO(x) ((x) + 0x00)
+#define UART_DLM_IER(x) ((x) + 0x04)
+#define UART_IIR_FCR(x) ((x) + 0x08)
+#define UART_LCR_(x) ((x) + 0x0C)
+#define UART_MODEM_CTRL(x) ((x) + 0x10)
+#define UART_LSR_(x) ((x) + 0x14)
+#define UART_MODEM_STATUS(x) ((x) + 0x18)
+#define UART_RXLEV(x) ((x) + 0x1C)
+
+/*
+ *
+ * UART control structure offsets
+ *
+ */
+#define UARTCTL_CTRL(x) ((x) + 0x00)
+#define UARTCTL_CLKMODE(x) ((x) + 0x04)
+#define UARTCTL_CLOOP(x) ((x) + 0x08)
+
+/*
+ * ctrl register definitions
+ */
+#define UART_U3_MD_CTRL_EN _BIT(11)
+#define UART_IRRX6_INV_EN _BIT(10)
+#define UART_HDPX_EN _BIT(9)
+#define UART_UART6_IRDAMOD_BYPASS _BIT(5)
+#define RT_IRTX6_INV_EN _BIT(4)
+#define RT_IRTX6_INV_MIR_EN _BIT(3)
+#define RT_RX_IRPULSE_3_16_115K _BIT(2)
+#define RT_TX_IRPULSE_3_16_115K _BIT(1)
+#define UART_U5_ROUTE_TO_USB _BIT(0)
+
+/*
+ * clkmode register definitions
+ */
+#define UART_ENABLED_CLOCKS(n) (((n) >> 16) & 0x7F)
+#define UART_ENABLED_CLOCK(n, u) (((n) >> (16 + (u))) & 0x1)
+#define UART_ENABLED_CLKS_ANY _BIT(14)
+#define UART_CLKMODE_OFF 0x0
+#define UART_CLKMODE_ON 0x1
+#define UART_CLKMODE_AUTO 0x2
+#define UART_CLKMODE_MASK(u) (0x3 << ((((u) - 3) * 2) + 4))
+#define UART_CLKMODE_LOAD(m, u) ((m) << ((((u) - 3) *
2) + 4))
+
+/*
+ *
+ * GPIO Module Register offsets
+ *
+ */
+#define GPIO_P3_INP_STATE(x) ((x) + 0x000)
+#define GPIO_P3_OUTP_SET(x) ((x) + 0x004)
+#define GPIO_P3_OUTP_CLR(x) ((x) + 0x008)
+#define GPIO_P3_OUTP_STATE(x) ((x) + 0x00C)
+#define GPIO_P2_DIR_SET(x) ((x) + 0x010)
+#define GPIO_P2_DIR_CLR(x) ((x) + 0x014)
+#define GPIO_P2_DIR_STATE(x) ((x) + 0x018)
+#define GPIO_P2_INP_STATE(x) ((x) + 0x01C)
+#define GPIO_P2_OUTP_SET(x) ((x) + 0x020)
+#define GPIO_P2_OUTP_CLR(x) ((x) + 0x024)
+#define GPIO_P2_MUX_SET(x) ((x) + 0x028)
+#define GPIO_P2_MUX_CLR(x) ((x) + 0x02C)
+#define GPIO_P2_MUX_STATE(x) ((x) + 0x030)
+#define GPIO_P0_INP_STATE(x) ((x) + 0x040)
+#define GPIO_P0_OUTP_SET(x) ((x) + 0x044)
+#define GPIO_P0_OUTP_CLR(x) ((x) + 0x048)
+#define GPIO_P0_OUTP_STATE(x) ((x) + 0x04C)
+#define GPIO_P0_DIR_SET(x) ((x) + 0x050)
+#define GPIO_P0_DIR_CLR(x) ((x) + 0x054)
+#define GPIO_P0_DIR_STATE(x) ((x) + 0x058)
+#define GPIO_P1_INP_STATE(x) ((x) + 0x060)
+#define GPIO_P1_OUTP_SET(x) ((x) + 0x064)
+#define GPIO_P1_OUTP_CLR(x) ((x) + 0x068)
+#define GPIO_P1_OUTP_STATE(x) ((x) + 0x06C)
+#define GPIO_P1_DIR_SET(x) ((x) + 0x070)
+#define GPIO_P1_DIR_CLR(x) ((x) + 0x074)
+#define GPIO_P1_DIR_STATE(x) ((x) + 0x078)
+#define GPIO_P_MUX_SET(x) ((x) + 0x100)
+#define GPIO_P_MUX_CLR(x) ((x) + 0x104)
+#define GPIO_P_MUX_STATE(x) ((x) + 0x108)
+#define GPIO_P3_MUX_SET(x) ((x) + 0x110)
+#define GPIO_P3_MUX_CLR(x) ((x) + 0x114)
+#define GPIO_P3_MUX_STATE(x) ((x) + 0x118)
+#define GPIO_P0_MUX_SET(x) ((x) + 0x120)
+#define GPIO_P0_MUX_CLR(x) ((x) + 0x124)
+#define GPIO_P0_MUX_STATE(x) ((x) + 0x128)
+#define GPIO_P1_MUX_SET(x) ((x) + 0x130)
+#define GPIO_P1_MUX_CLR(x) ((x) + 0x134)
+#define GPIO_P1_MUX_STATE(x) ((x) + 0x138)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h
b/arch/arm/mach-lpc32xx/include/mach/system.h
new file mode 100644
index 0000000..29bd2e4
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/system.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/system.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ extern void lpc32xx_watchdog_reset(void);
+
+ switch (mode) {
+ case 's':
+ case 'h':
+ printk(KERN_CRIT "RESET: Rebooting system\n");
+
+ /* Disable interrupts */
+ local_irq_disable();
+
+ lpc32xx_watchdog_reset();
+ break;
+
+ default:
+ /* Do nothing */
+ break;
+ }
+
+ /* Wait for watchdog to reset system */
+ while (1)
+ ;
+}
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/timex.h
b/arch/arm/mach-lpc32xx/include/mach/timex.h
new file mode 100644
index 0000000..1f872c5
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/timex.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/timex.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * Rate in Hz of the main system oscillator. This value should match
+ * the value 'MAIN_OSC_FREQ' in platform.h
+ */
+#define CLOCK_TICK_RATE 13000000
+
+#endif
+
diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h
b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
new file mode 100644
index 0000000..a00ecc5
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
@@ -0,0 +1,114 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/uncompress.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_UNCOMPRESS_H
+#define __ASM_ARM_ARCH_UNCOMPRESS_H
+
+#include <linux/io.h>
+
+#include <mach/platform.h>
+
+#if defined(CONFIG_ARCH_LPC32XX_UNCOMP_HSU1) || \
+ defined(CONFIG_ARCH_LPC32XX_UNCOMP_HSU2) || \
+ defined(CONFIG_ARCH_LPC32XX_UNCOMP_HSU7)
+/*
+ * High speed UART uncompress output support
+*/
+#ifdef CONFIG_ARCH_LPC32XX_UNCOMP_HSU1
+#define HS_UARTX_BASE (HS_UART1_BASE)
+#endif
+
+#ifdef CONFIG_ARCH_LPC32XX_UNCOMP_HSU2
+#define HS_UARTX_BASE (HS_UART2_BASE)
+#endif
+
+#ifdef CONFIG_ARCH_LPC32XX_UNCOMP_HSU7
+#define HS_UARTX_BASE (HS_UART7_BASE)
+#endif
+
+#define HSUART_FIFO (HS_UARTX_BASE + 0x00)
+#define HSUART_LEVEL (HS_UARTX_BASE + 0x04)
+
+static inline void putc(int ch)
+{
+ /* Wait for transmit FIFO to empty */
+ while ((readl(HSUART_LEVEL) & 0xFF00) != 0)
+ ;
+ writel((u32) ch, HSUART_FIFO);
+}
+static inline void flush(void)
+{
+ /* Don't see a reset? */
+ /* Then just wait for transmition to complete */
+ while ((readl(HSUART_LEVEL) & 0xFF00) != 0)
+ ;
+}
+
+#else
+/*
+ * Standard UART uncompress output support
+ */
+
+#define UART_FIFO_CTL_TX_RESET (1 << 2)
+#define UART_STATUS_TX_MT (1 << 6)
+
+#ifdef CONFIG_ARCH_LPC32XX_UNCOMP_U3
+#define UARTX_BASE (UART3_BASE)
+#endif
+
+#ifdef CONFIG_ARCH_LPC32XX_UNCOMP_U4
+#define UARTX_BASE (UART4_BASE)
+#endif
+
+#ifdef CONFIG_ARCH_LPC32XX_UNCOMP_U5
+#define UARTX_BASE (UART5_BASE)
+#endif
+
+#ifdef CONFIG_ARCH_LPC32XX_UNCOMP_U6
+#define UARTX_BASE (UART6_BASE)
+#endif
+
+#define UART_DATA (UARTX_BASE + 0x00)
+#define UART_FIFO_CTL (UARTX_BASE + 0x08)
+#define UART_STATUS (UARTX_BASE + 0x14)
+
+static inline void putc(int ch)
+{
+ /* Wait for transmit FIFO to empty */
+ while ((readl(UART_STATUS) & UART_STATUS_TX_MT) == 0)
+ ;
+
+ writel((u32) ch, UART_DATA);
+}
+
+static inline void flush(void)
+{
+ writel(readl(UART_FIFO_CTL) | UART_FIFO_CTL_TX_RESET,
UART_FIFO_CTL);
+}
+#endif
+
+/* NULL functions; we don't presently need them */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
+
diff --git a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
new file mode 100644
index 0000000..5efcc96
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/vmalloc.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+
+#endif
--
1.6.6
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2010-01-27 0:20 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-27 0:20 [PATCH 09/10] ARM: LPC32XX: architecture header files Kevin Wells
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.