All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alberto Panizzo <maramaopercheseimorto@gmail.com>
To: "Lothar Waßmann" <LW@KARO-electronics.de>
Cc: linux-input <linux-input@vger.kernel.org>,
	H Hartley Sweeten <hartleys@visionengravers.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Sascha linux-arm <s.hauer@pengutronix.de>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.
Date: Wed, 27 Jan 2010 16:29:19 +0100	[thread overview]
Message-ID: <1264606159.2463.81.camel@realization> (raw)
In-Reply-To: <19296.21298.394254.553268@ipc1.ka-ro>

On mer, 2010-01-27 at 15:52 +0100, Lothar Waßmann wrote:
> Hi,
> 
> Alberto Panizzo writes:
> > On mer, 2010-01-27 at 13:18 +0100, Lothar Waßmann wrote:
> > > Hi,
> > > 
> > > Alberto Panizzo writes:
> > > > > > +	irq = platform_get_irq(pdev, 0);
> > > > > > +	if (irq < 0) {
> > > > > > +		dev_err(&pdev->dev, "failed to get keypad irq\n");
> > > > > > +		return -ENXIO;
> > > > > > +	}
> > > > > >
> > > > > This should be -ENODEV.
> > > > > 
> > > > Lot of reference keyboard driver use -ENXIO..
> > > > May should be better: return irq ?
> > > > 
> > > Yes, of course. If a function returns an error code that should be
> > > promoted to the caller instead of inventing a new error code.
> > > 
> > > 
> > > Lothar Waßmann
> > 
> > But, errno.h say:
> > #define ENXIO           6                // Device not configured
> > #define ENODEV          19               // Operation not supported by device
> > 
> What errno.h file is that?
> I have:
> ./include/asm-generic/errno-base.h:#define      ENXIO            6      /* No such device or address */
> ./include/asm-generic/errno-base.h:#define      ENODEV          19      /* No such device */
> 
> AFAIK ENXIO is used when actual I/O has been attempted. But in this
> case the driver is still being configured and did not do any I/O yet.
> 
> 
> Lothar Waßmann

The errno.h that I propose is a googled one and the kernel-one do not explain well..
Not for fighting, I wont understand.

In drivers/base/platform.c:

/**
 * platform_get_irq - get an IRQ for a device
 * @dev: platform device
 * @num: IRQ number index
 */
int platform_get_irq(struct platform_device *dev, unsigned int num)
{
	struct resource *r = platform_get_resource(dev, IORESOURCE_IRQ, num);

	return r ? r->start : -ENXIO;
}

If there isn't the irq resource asked platform_get_irq return ENXIO.

Alberto

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: maramaopercheseimorto@gmail.com (Alberto Panizzo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.
Date: Wed, 27 Jan 2010 16:29:19 +0100	[thread overview]
Message-ID: <1264606159.2463.81.camel@realization> (raw)
In-Reply-To: <19296.21298.394254.553268@ipc1.ka-ro>

On mer, 2010-01-27 at 15:52 +0100, Lothar Wa?mann wrote:
> Hi,
> 
> Alberto Panizzo writes:
> > On mer, 2010-01-27 at 13:18 +0100, Lothar Wa?mann wrote:
> > > Hi,
> > > 
> > > Alberto Panizzo writes:
> > > > > > +	irq = platform_get_irq(pdev, 0);
> > > > > > +	if (irq < 0) {
> > > > > > +		dev_err(&pdev->dev, "failed to get keypad irq\n");
> > > > > > +		return -ENXIO;
> > > > > > +	}
> > > > > >
> > > > > This should be -ENODEV.
> > > > > 
> > > > Lot of reference keyboard driver use -ENXIO..
> > > > May should be better: return irq ?
> > > > 
> > > Yes, of course. If a function returns an error code that should be
> > > promoted to the caller instead of inventing a new error code.
> > > 
> > > 
> > > Lothar Wa?mann
> > 
> > But, errno.h say:
> > #define ENXIO           6                // Device not configured
> > #define ENODEV          19               // Operation not supported by device
> > 
> What errno.h file is that?
> I have:
> ./include/asm-generic/errno-base.h:#define      ENXIO            6      /* No such device or address */
> ./include/asm-generic/errno-base.h:#define      ENODEV          19      /* No such device */
> 
> AFAIK ENXIO is used when actual I/O has been attempted. But in this
> case the driver is still being configured and did not do any I/O yet.
> 
> 
> Lothar Wa?mann

The errno.h that I propose is a googled one and the kernel-one do not explain well..
Not for fighting, I wont understand.

In drivers/base/platform.c:

/**
 * platform_get_irq - get an IRQ for a device
 * @dev: platform device
 * @num: IRQ number index
 */
int platform_get_irq(struct platform_device *dev, unsigned int num)
{
	struct resource *r = platform_get_resource(dev, IORESOURCE_IRQ, num);

	return r ? r->start : -ENXIO;
}

If there isn't the irq resource asked platform_get_irq return ENXIO.

Alberto

  reply	other threads:[~2010-01-27 15:29 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-27  9:55 [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family Alberto Panizzo
2010-01-27  9:55 ` Alberto Panizzo
2010-01-27 10:33 ` Lothar Waßmann
2010-01-27 10:33   ` Lothar Waßmann
2010-01-27 10:45   ` Uwe Kleine-König
2010-01-27 10:45     ` Uwe Kleine-König
2010-01-27 12:17     ` Alberto Panizzo
2010-01-27 12:17       ` Alberto Panizzo
2010-01-27 12:14   ` Alberto Panizzo
2010-01-27 12:14     ` Alberto Panizzo
2010-01-27 12:18     ` Lothar Waßmann
2010-01-27 12:18       ` Lothar Waßmann
2010-01-27 14:39       ` Alberto Panizzo
2010-01-27 14:39         ` Alberto Panizzo
2010-01-27 14:52         ` Lothar Waßmann
2010-01-27 14:52           ` Lothar Waßmann
2010-01-27 15:29           ` Alberto Panizzo [this message]
2010-01-27 15:29             ` Alberto Panizzo
2010-01-27 17:03             ` Lothar Waßmann
2010-01-27 17:03               ` Lothar Waßmann
2010-01-27 17:32               ` Dmitry Torokhov
2010-01-27 17:32                 ` Dmitry Torokhov
2010-01-27 17:42               ` Alberto Panizzo
2010-01-27 17:42                 ` Alberto Panizzo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1264606159.2463.81.camel@realization \
    --to=maramaopercheseimorto@gmail.com \
    --cc=LW@KARO-electronics.de \
    --cc=dmitry.torokhov@gmail.com \
    --cc=hartleys@visionengravers.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-input@vger.kernel.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.