From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Felix Radensky <felix@embedded-sol.com>
Cc: "linuxppc-dev@ozlabs.org" <linuxppc-dev@ozlabs.org>,
linux-pci@vger.kernel.org, yinghai@kernel.org,
Alex Chiang <achiang@hp.com>,
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Subject: Re: Problem with PCI bus rescan on 460EX
Date: Sun, 28 Mar 2010 20:56:31 +1100 [thread overview]
Message-ID: <1269770191.8599.329.camel@pasglop> (raw)
In-Reply-To: <4BAF1DC2.2080600@embedded-sol.com>
On Sun, 2010-03-28 at 12:13 +0300, Felix Radensky wrote:
> I've tried Jesse's tree with Yinghai's patches, but they don't seem to help.
> Memory for bridge is not allocated after insertion of hotplug device and
> bus rescan. Attached dmesg output in case of success and failure.
I'd recommend that for now, your platform uses a quirk to manually
resize the bridge resource to make room for future hotplug on it.
Cheers,
Ben.
> Thanks.
>
> Felix.
> plain text document attachment (success.txt)
> Linux version 2.6.33 (felix@felix-laptop.lan) (gcc version 4.2.2) #8 Sun Mar 28 12:04:25 IDT 2010
> Found legacy serial port 0 for /plb/opb/serial@ef600300
> mem=4ef600300, taddr=4ef600300, irq=0, clk=7407407, speed=0
> Found legacy serial port 1 for /plb/opb/serial@ef600400
> mem=4ef600400, taddr=4ef600400, irq=0, clk=7407407, speed=0
> Found legacy serial port 2 for /plb/opb/serial@ef600500
> mem=4ef600500, taddr=4ef600500, irq=0, clk=7407407, speed=0
> Found legacy serial port 3 for /plb/opb/serial@ef600600
> mem=4ef600600, taddr=4ef600600, irq=0, clk=7407407, speed=0
> Top of RAM: 0x30000000, Total RAM: 0x30000000
> Memory hole size: 0MB
> Zone PFN ranges:
> DMA 0x00000000 -> 0x00030000
> Normal 0x00030000 -> 0x00030000
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0x00000000 -> 0x00030000
> On node 0 totalpages: 196608
> free_area_init_node: node 0, pgdat c02a84d0, node_mem_map c02e1000
> DMA zone: 1536 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 195072 pages, LIFO batch:31
> MMU: Allocated 1088 bytes of context maps for 255 contexts
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195072
> Kernel command line: root=/dev/nfs rw nfsroot=10.0.0.10:/opt/eldk/ppc_4xxFP ip=10.0.0.30:10.0.0.10:10.0.0.138:255.0.0.0:smbe460:eth0:off panic=1 console=ttyS0,115200
> PID hash table entries: 4096 (order: 2, 16384 bytes)
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 776500k/786432k available (2656k kernel code, 9932k reserved, 100k data, 184k bss, 132k init)
> Kernel virtual memory layout:
> * 0xfffdf000..0xfffff000 : fixmap
> * 0xfde00000..0xfe000000 : consistent mem
> * 0xfde00000..0xfde00000 : early ioremap
> * 0xf1000000..0xfde00000 : vmalloc & ioremap
> SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> Hierarchical RCU implementation.
> NR_IRQS:512 nr_irqs:512
> UIC0 (32 IRQ sources) at DCR 0xc0
> UIC1 (32 IRQ sources) at DCR 0xd0
> alloc irq_desc for 30 on node 0
> alloc kstat_irqs on node 0
> irq: irq 30 on host /interrupt-controller0 mapped to virtual irq 30
> UIC2 (32 IRQ sources) at DCR 0xe0
> alloc irq_desc for 16 on node 0
> alloc kstat_irqs on node 0
> irq: irq 10 on host /interrupt-controller0 mapped to virtual irq 16
> UIC3 (32 IRQ sources) at DCR 0xf0
> alloc irq_desc for 17 on node 0
> alloc kstat_irqs on node 0
> irq: irq 16 on host /interrupt-controller0 mapped to virtual irq 17
> time_init: decrementer frequency = 1000.000012 MHz
> time_init: processor frequency = 1000.000012 MHz
> clocksource: timebase mult[400000] shift[22] registered
> clockevent: decrementer mult[80000019] shift[31] cpu[0]
> Mount-cache hash table entries: 512
> NET: Registered protocol family 16
> alloc irq_desc for 18 on node 0
> alloc kstat_irqs on node 0
> irq: irq 11 on host /interrupt-controller1 mapped to virtual irq 18
> 256k L2-cache enabled
> PCI host bridge /plb/pci@c0ec00000 (primary) ranges:
> MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
> MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
> IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
> Removing ISA hole at 0x0000000c0ee00000
> 4xx PCI DMA offset set to 0x00000000
> /plb/pci@c0ec00000: Legacy ISA memory support enabled
> PCI: Probing PCI hardware
> pci_bus 0000:00: scanning bus
> pci 0000:00:02.0: found [3388:0020] class 000604 header type 01
> pci 0000:00:02.0: calling pcibios_fixup_resources+0x0/0xf4
> pci 0000:00:02.0: calling fixup_ppc4xx_pci_bridge+0x0/0x154
> pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x200
> pci 0000:00:02.0: supports D1 D2
> pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
> pci 0000:00:02.0: PME# disabled
> pci_bus 0000:00: fixups for bus
> pci 0000:00:02.0: scanning behind bridge, config 010100, pass 0
> pci_bus 0000:01: scanning bus
> pci 0000:01:00.0: found [1575:0002] class 00ff00 header type 00
> pci 0000:01:00.0: reg 10: [mem 0x80000000-0x800fffff]
> pci 0000:01:00.0: reg 14: [mem 0x84000000-0x87ffffff]
> pci 0000:01:00.0: reg 18: [mem 0x88000000-0x8bffffff]
> pci 0000:01:00.0: reg 1c: [mem 0x8c000000-0x8c003fff]
> pci 0000:01:00.0: calling pcibios_fixup_resources+0x0/0xf4
> pci 0000:01:00.0: calling fixup_ppc4xx_pci_bridge+0x0/0x154
> pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x200
> pci_bus 0000:01: fixups for bus
> pci 0000:00:02.0: PCI bridge to [bus 01-01]
> pci 0000:00:02.0: bridge window [io 1000 - 0000] reg reading
> pci 0000:00:02.0: bridge window [mem 0x80000000-0x8c0fffff]
> pci 0000:00:02.0: bridge window [mem 0x10000000 - 000fffff pref] reg reading
> pci_bus 0000:01: bus scan returning with max=01
> pci 0000:00:02.0: scanning behind bridge, config 010100, pass 1
> pci_bus 0000:00: bus scan returning with max=01
> PCI: max bus depth: 1 pci_try_num: 2
> pci 0000:00:02.0: BAR 8: assigned [mem 0xd80000000-0xd8dffffff]
> pci 0000:01:00.0: BAR 1: assigned [mem 0xd80000000-0xd83ffffff]
> pci 0000:01:00.0: BAR 1: set to [mem 0xd80000000-0xd83ffffff] (PCI address [0x80000000-0x83ffffff]
> pci 0000:01:00.0: BAR 2: assigned [mem 0xd84000000-0xd87ffffff]
> pci 0000:01:00.0: BAR 2: set to [mem 0xd84000000-0xd87ffffff] (PCI address [0x84000000-0x87ffffff]
> pci 0000:01:00.0: BAR 0: assigned [mem 0xd88000000-0xd880fffff]
> pci 0000:01:00.0: BAR 0: set to [mem 0xd88000000-0xd880fffff] (PCI address [0x88000000-0x880fffff]
> pci 0000:01:00.0: BAR 3: assigned [mem 0xd88100000-0xd88103fff]
> pci 0000:01:00.0: BAR 3: set to [mem 0xd88100000-0xd88103fff] (PCI address [0x88100000-0x88103fff]
> pci 0000:00:02.0: PCI bridge to [bus 01-01]
> pci 0000:00:02.0: bridge window [io disabled]
> pci 0000:00:02.0: bridge window [mem 0xd80000000-0xd8dffffff]
> pci 0000:00:02.0: bridge window [mem pref disabled]
> pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
> pci_bus 0000:00: resource 1 [mem 0xd80000000-0xdffffffff]
> pci_bus 0000:01: resource 1 [mem 0xd80000000-0xd8dffffff]
> bio: create slab <bio-0> at 0
> SCSI subsystem initialized
> Switching to clocksource timebase
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> UDP hash table entries: 512 (order: 1, 8192 bytes)
> UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
> NET: Registered protocol family 1
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x54
> pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x6d0
> pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x54
> pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x6d0
> PCI: CLS 32 bytes, default 32
> alloc irq_desc for 19 on node 0
> alloc kstat_irqs on node 0
> irq: irq 1 on host /interrupt-controller1 mapped to virtual irq 19
> alloc irq_desc for 20 on node 0
> alloc kstat_irqs on node 0
> irq: irq 1 on host /interrupt-controller0 mapped to virtual irq 20
> alloc irq_desc for 29 on node 0
> alloc kstat_irqs on node 0
> irq: irq 29 on host /interrupt-controller1 mapped to virtual irq 29
> alloc irq_desc for 21 on node 0
> alloc kstat_irqs on node 0
> irq: irq 30 on host /interrupt-controller1 mapped to virtual irq 21
> msgmni has been set to 1516
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 19) is a 16550A
> console [ttyS0] enabled
> serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 20) is a 16550A
> serial8250.0: ttyS2 at MMIO 0x4ef600500 (irq = 29) is a 16550A
> serial8250.0: ttyS3 at MMIO 0x4ef600600 (irq = 21) is a 16550A
> 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 19) is a 16550
> 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 20) is a 16550
> 4ef600500.serial: ttyS2 at MMIO 0x4ef600500 (irq = 29) is a 16550
> 4ef600600.serial: ttyS3 at MMIO 0x4ef600600 (irq = 21) is a 16550
> PPC 4xx OCP EMAC driver, version 3.54
> alloc irq_desc for 22 on node 0
> alloc kstat_irqs on node 0
> irq: irq 6 on host /interrupt-controller2 mapped to virtual irq 22
> alloc irq_desc for 23 on node 0
> alloc kstat_irqs on node 0
> irq: irq 7 on host /interrupt-controller2 mapped to virtual irq 23
> alloc irq_desc for 24 on node 0
> alloc kstat_irqs on node 0
> irq: irq 3 on host /interrupt-controller2 mapped to virtual irq 24
> alloc irq_desc for 25 on node 0
> alloc kstat_irqs on node 0
> irq: irq 4 on host /interrupt-controller2 mapped to virtual irq 25
> alloc irq_desc for 26 on node 0
> alloc kstat_irqs on node 0
> irq: irq 5 on host /interrupt-controller2 mapped to virtual irq 26
> MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels
> ZMII /plb/opb/emac-zmii@ef600d00 initialized
> RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support
> TAH /plb/opb/emac-tah@ef601350 initialized
> TAH /plb/opb/emac-tah@ef601450 initialized
> alloc irq_desc for 27 on node 0
> alloc kstat_irqs on node 0
> irq: irq 16 on host /interrupt-controller2 mapped to virtual irq 27
> alloc irq_desc for 28 on node 0
> alloc kstat_irqs on node 0
> irq: irq 20 on host /interrupt-controller2 mapped to virtual irq 28
> /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
> eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:99:88:77:66:55
> eth0: found Generic MII PHY (0x00)
> alloc irq_desc for 31 on node 0
> alloc kstat_irqs on node 0
> irq: irq 17 on host /interrupt-controller2 mapped to virtual irq 31
> alloc irq_desc for 32 on node 0
> alloc kstat_irqs on node 0
> irq: irq 21 on host /interrupt-controller2 mapped to virtual irq 32
> /plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode
> eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:99:88:77:66:56
> eth1: found Generic MII PHY (0x10)
> TCP cubic registered
> NET: Registered protocol family 17
> 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
> All bugs added by David S. Miller <davem@redhat.com>
> eth0: link is down
> IP-Config: Complete:
> device=eth0, addr=10.0.0.30, mask=255.0.0.0, gw=10.0.0.138,
> host=smbe460, domain=, nis-domain=(none),
> bootserver=10.0.0.10, rootserver=10.0.0.10, rootpath=
> Looking up port of RPC 100003/2 on 10.0.0.10
> eth0: link is up, 100 FDX, pause enabled
> Looking up port of RPC 100005/1 on 10.0.0.10
> VFS: Mounted root (nfs filesystem) on device 0:11.
> Freeing unused kernel memory: 132k init
> plain text document attachment (failure.txt)
> Linux version 2.6.33 (felix@felix-laptop.lan) (gcc version 4.2.2) #8 Sun Mar 28 12:04:25 IDT 2010
> Found legacy serial port 0 for /plb/opb/serial@ef600300
> mem=4ef600300, taddr=4ef600300, irq=0, clk=7407407, speed=0
> Found legacy serial port 1 for /plb/opb/serial@ef600400
> mem=4ef600400, taddr=4ef600400, irq=0, clk=7407407, speed=0
> Found legacy serial port 2 for /plb/opb/serial@ef600500
> mem=4ef600500, taddr=4ef600500, irq=0, clk=7407407, speed=0
> Found legacy serial port 3 for /plb/opb/serial@ef600600
> mem=4ef600600, taddr=4ef600600, irq=0, clk=7407407, speed=0
> Top of RAM: 0x30000000, Total RAM: 0x30000000
> Memory hole size: 0MB
> Zone PFN ranges:
> DMA 0x00000000 -> 0x00030000
> Normal 0x00030000 -> 0x00030000
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0x00000000 -> 0x00030000
> On node 0 totalpages: 196608
> free_area_init_node: node 0, pgdat c02a84d0, node_mem_map c02e1000
> DMA zone: 1536 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 195072 pages, LIFO batch:31
> MMU: Allocated 1088 bytes of context maps for 255 contexts
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195072
> Kernel command line: root=/dev/nfs rw nfsroot=10.0.0.10:/opt/eldk/ppc_4xxFP ip=10.0.0.30:10.0.0.10:10.0.0.138:255.0.0.0:smbe460:eth0:off panic=1 console=ttyS0,115200
> PID hash table entries: 4096 (order: 2, 16384 bytes)
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 776500k/786432k available (2656k kernel code, 9932k reserved, 100k data, 184k bss, 132k init)
> Kernel virtual memory layout:
> * 0xfffdf000..0xfffff000 : fixmap
> * 0xfde00000..0xfe000000 : consistent mem
> * 0xfde00000..0xfde00000 : early ioremap
> * 0xf1000000..0xfde00000 : vmalloc & ioremap
> SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> Hierarchical RCU implementation.
> NR_IRQS:512 nr_irqs:512
> UIC0 (32 IRQ sources) at DCR 0xc0
> UIC1 (32 IRQ sources) at DCR 0xd0
> alloc irq_desc for 30 on node 0
> alloc kstat_irqs on node 0
> irq: irq 30 on host /interrupt-controller0 mapped to virtual irq 30
> UIC2 (32 IRQ sources) at DCR 0xe0
> alloc irq_desc for 16 on node 0
> alloc kstat_irqs on node 0
> irq: irq 10 on host /interrupt-controller0 mapped to virtual irq 16
> UIC3 (32 IRQ sources) at DCR 0xf0
> alloc irq_desc for 17 on node 0
> alloc kstat_irqs on node 0
> irq: irq 16 on host /interrupt-controller0 mapped to virtual irq 17
> time_init: decrementer frequency = 1000.000012 MHz
> time_init: processor frequency = 1000.000012 MHz
> clocksource: timebase mult[400000] shift[22] registered
> clockevent: decrementer mult[80000019] shift[31] cpu[0]
> Mount-cache hash table entries: 512
> NET: Registered protocol family 16
> alloc irq_desc for 18 on node 0
> alloc kstat_irqs on node 0
> irq: irq 11 on host /interrupt-controller1 mapped to virtual irq 18
> 256k L2-cache enabled
> PCI host bridge /plb/pci@c0ec00000 (primary) ranges:
> MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
> MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
> IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
> Removing ISA hole at 0x0000000c0ee00000
> 4xx PCI DMA offset set to 0x00000000
> /plb/pci@c0ec00000: Legacy ISA memory support enabled
> PCI: Probing PCI hardware
> pci_bus 0000:00: scanning bus
> pci 0000:00:02.0: found [3388:0020] class 000604 header type 01
> pci 0000:00:02.0: calling pcibios_fixup_resources+0x0/0xf4
> pci 0000:00:02.0: calling fixup_ppc4xx_pci_bridge+0x0/0x154
> pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x200
> pci 0000:00:02.0: supports D1 D2
> pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
> pci 0000:00:02.0: PME# disabled
> pci_bus 0000:00: fixups for bus
> pci 0000:00:02.0: scanning behind bridge, config 010100, pass 0
> pci_bus 0000:01: scanning bus
> pci_bus 0000:01: fixups for bus
> pci 0000:00:02.0: PCI bridge to [bus 01-01]
> pci 0000:00:02.0: bridge window [io 1000 - 0000] reg reading
> pci 0000:00:02.0: bridge window [mem 0x80000000 - 0x7fffffff] reg reading
> pci 0000:00:02.0: bridge window [mem 0x10000000 - 000fffff pref] reg reading
> pci_bus 0000:01: bus scan returning with max=01
> pci 0000:00:02.0: scanning behind bridge, config 010100, pass 1
> pci_bus 0000:00: bus scan returning with max=01
> PCI: max bus depth: 1 pci_try_num: 2
> pci 0000:00:02.0: PCI bridge to [bus 01-01]
> pci 0000:00:02.0: bridge window [io disabled]
> pci 0000:00:02.0: bridge window [mem disabled]
> pci 0000:00:02.0: bridge window [mem pref disabled]
> pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
> pci_bus 0000:00: resource 1 [mem 0xd80000000-0xdffffffff]
> bio: create slab <bio-0> at 0
> SCSI subsystem initialized
> Switching to clocksource timebase
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> UDP hash table entries: 512 (order: 1, 8192 bytes)
> UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
> NET: Registered protocol family 1
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x54
> pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x6d0
> PCI: CLS 32 bytes, default 32
> alloc irq_desc for 19 on node 0
> alloc kstat_irqs on node 0
> irq: irq 1 on host /interrupt-controller1 mapped to virtual irq 19
> alloc irq_desc for 20 on node 0
> alloc kstat_irqs on node 0
> irq: irq 1 on host /interrupt-controller0 mapped to virtual irq 20
> alloc irq_desc for 29 on node 0
> alloc kstat_irqs on node 0
> irq: irq 29 on host /interrupt-controller1 mapped to virtual irq 29
> alloc irq_desc for 21 on node 0
> alloc kstat_irqs on node 0
> irq: irq 30 on host /interrupt-controller1 mapped to virtual irq 21
> msgmni has been set to 1516
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 19) is a 16550A
> console [ttyS0] enabled
> serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 20) is a 16550A
> serial8250.0: ttyS2 at MMIO 0x4ef600500 (irq = 29) is a 16550A
> serial8250.0: ttyS3 at MMIO 0x4ef600600 (irq = 21) is a 16550A
> 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 19) is a 16550
> 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 20) is a 16550
> 4ef600500.serial: ttyS2 at MMIO 0x4ef600500 (irq = 29) is a 16550
> 4ef600600.serial: ttyS3 at MMIO 0x4ef600600 (irq = 21) is a 16550
> PPC 4xx OCP EMAC driver, version 3.54
> alloc irq_desc for 22 on node 0
> alloc kstat_irqs on node 0
> irq: irq 6 on host /interrupt-controller2 mapped to virtual irq 22
> alloc irq_desc for 23 on node 0
> alloc kstat_irqs on node 0
> irq: irq 7 on host /interrupt-controller2 mapped to virtual irq 23
> alloc irq_desc for 24 on node 0
> alloc kstat_irqs on node 0
> irq: irq 3 on host /interrupt-controller2 mapped to virtual irq 24
> alloc irq_desc for 25 on node 0
> alloc kstat_irqs on node 0
> irq: irq 4 on host /interrupt-controller2 mapped to virtual irq 25
> alloc irq_desc for 26 on node 0
> alloc kstat_irqs on node 0
> irq: irq 5 on host /interrupt-controller2 mapped to virtual irq 26
> MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels
> ZMII /plb/opb/emac-zmii@ef600d00 initialized
> RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support
> TAH /plb/opb/emac-tah@ef601350 initialized
> TAH /plb/opb/emac-tah@ef601450 initialized
> alloc irq_desc for 27 on node 0
> alloc kstat_irqs on node 0
> irq: irq 16 on host /interrupt-controller2 mapped to virtual irq 27
> alloc irq_desc for 28 on node 0
> alloc kstat_irqs on node 0
> irq: irq 20 on host /interrupt-controller2 mapped to virtual irq 28
> /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
> eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:99:88:77:66:55
> eth0: found Generic MII PHY (0x00)
> alloc irq_desc for 31 on node 0
> alloc kstat_irqs on node 0
> irq: irq 17 on host /interrupt-controller2 mapped to virtual irq 31
> alloc irq_desc for 32 on node 0
> alloc kstat_irqs on node 0
> irq: irq 21 on host /interrupt-controller2 mapped to virtual irq 32
> /plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode
> eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:99:88:77:66:56
> eth1: found Generic MII PHY (0x10)
> TCP cubic registered
> NET: Registered protocol family 17
> 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
> All bugs added by David S. Miller <davem@redhat.com>
> eth0: link is down
> IP-Config: Complete:
> device=eth0, addr=10.0.0.30, mask=255.0.0.0, gw=10.0.0.138,
> host=smbe460, domain=, nis-domain=(none),
> bootserver=10.0.0.10, rootserver=10.0.0.10, rootpath=
> Looking up port of RPC 100003/2 on 10.0.0.10
> eth0: link is up, 100 FDX, pause enabled
> Looking up port of RPC 100005/1 on 10.0.0.10
> VFS: Mounted root (nfs filesystem) on device 0:11.
> Freeing unused kernel memory: 132k init
> pci_bus 0000:00: scanning bus
> pci 0000:00:02.0: scanning behind bridge, config 010100, pass 0
> pci_bus 0000:01: scanning bus
> pci 0000:01:00.0: found [1575:0002] class 00ff00 header type 00
> pci 0000:01:00.0: reg 10: [mem 0x00000000-0x000fffff]
> pci 0000:01:00.0: reg 14: [mem 0x00000000-0x03ffffff]
> pci 0000:01:00.0: reg 18: [mem 0x00000000-0x03ffffff]
> pci 0000:01:00.0: reg 1c: [mem 0x00000000-0x00003fff]
> pci 0000:01:00.0: calling pcibios_fixup_resources+0x0/0xf4
> pci 0000:01:00.0: calling fixup_ppc4xx_pci_bridge+0x0/0x154
> pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x200
> pci_bus 0000:01: bus scan returning with max=01
> pci 0000:00:02.0: scanning behind bridge, config 010100, pass 1
> pci_bus 0000:00: bus scan returning with max=01
> pci 0000:00:02.0: BAR 8: assigned [mem 0xd80000000-0xd89ffffff]
> pci 0000:01:00.0: BAR 1: assigned [mem 0xd80000000-0xd83ffffff]
> pci 0000:01:00.0: BAR 1: set to [mem 0xd80000000-0xd83ffffff] (PCI address [0x80000000-0x83ffffff]
> pci 0000:01:00.0: BAR 2: assigned [mem 0xd84000000-0xd87ffffff]
> pci 0000:01:00.0: BAR 2: set to [mem 0xd84000000-0xd87ffffff] (PCI address [0x84000000-0x87ffffff]
> pci 0000:01:00.0: BAR 0: assigned [mem 0xd88000000-0xd880fffff]
> pci 0000:01:00.0: BAR 0: set to [mem 0xd88000000-0xd880fffff] (PCI address [0x88000000-0x880fffff]
> pci 0000:01:00.0: BAR 3: assigned [mem 0xd88100000-0xd88103fff]
> pci 0000:01:00.0: BAR 3: set to [mem 0xd88100000-0xd88103fff] (PCI address [0x88100000-0x88103fff]
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
next prev parent reply other threads:[~2010-03-28 9:57 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4B8E6FA3.70503@embedded-sol.com>
[not found] ` <20100310225100.GB27324@ldl.fc.hp.com>
2010-03-11 7:45 ` Problem with PCI bus rescan on 460EX Felix Radensky
2010-03-11 20:32 ` Benjamin Herrenschmidt
2010-03-11 21:41 ` Felix Radensky
2010-03-11 21:49 ` Benjamin Herrenschmidt
2010-03-11 7:50 ` Felix Radensky
2010-03-12 9:22 ` Kenji Kaneshige
2010-03-12 23:04 ` Felix Radensky
2010-03-15 5:39 ` Kenji Kaneshige
2010-03-15 5:46 ` Benjamin Herrenschmidt
2010-03-15 5:54 ` Benjamin Herrenschmidt
2010-03-15 6:09 ` Felix Radensky
2010-03-15 9:00 ` Kenji Kaneshige
2010-03-15 11:23 ` Felix Radensky
2010-03-16 5:40 ` Kenji Kaneshige
2010-03-16 8:39 ` Felix Radensky
2010-03-16 21:40 ` Felix Radensky
2010-03-17 1:03 ` Kenji Kaneshige
2010-03-17 7:38 ` Felix Radensky
2010-03-17 7:47 ` Benjamin Herrenschmidt
2010-03-17 7:57 ` Felix Radensky
2010-03-17 23:04 ` Benjamin Herrenschmidt
2010-03-18 0:09 ` Benjamin Herrenschmidt
2010-03-28 9:13 ` Felix Radensky
2010-03-28 9:56 ` Benjamin Herrenschmidt [this message]
2010-03-28 13:07 ` Felix Radensky
2010-03-29 0:05 ` Yinghai Lu
2010-03-29 7:01 ` Kenji Kaneshige
2010-03-29 7:35 ` Felix Radensky
2010-03-02 13:27 Felix Radensky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1269770191.8599.329.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=achiang@hp.com \
--cc=felix@embedded-sol.com \
--cc=kaneshige.kenji@jp.fujitsu.com \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.