From: Daniel Walker <dwalker@codeaurora.org>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org, Pavel Machek <pavel@ucw.cz>,
Daniel Walker <dwalker@codeaurora.org>
Subject: [PATCH 2/4] arm: msm: GPIO support for HTC Dream
Date: Tue, 30 Mar 2010 16:11:55 -0700 [thread overview]
Message-ID: <1269990717-2969-2-git-send-email-dwalker@codeaurora.org> (raw)
In-Reply-To: <1269990717-2969-1-git-send-email-dwalker@codeaurora.org>
From: Pavel Machek <pavel@ucw.cz>
Add GPIO support for HTC Dream.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
[dwalker@codeaurora.org: renamed to trout]
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
---
arch/arm/mach-msm/Makefile | 2 +-
arch/arm/mach-msm/board-trout-gpio.c | 112 ++++++++++++++++++++++++
arch/arm/mach-msm/board-trout.h | 157 ++++++++++++++++++++++++++++++++++
3 files changed, 270 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-msm/board-trout-gpio.c
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 47d47cb..fb9ab2d 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -9,5 +9,5 @@ obj-y += gpio.o
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-obj-$(CONFIG_MACH_TROUT) += board-trout.o
+obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o
diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c
new file mode 100644
index 0000000..6e6bc76
--- /dev/null
+++ b/arch/arm/mach-msm/board-trout-gpio.c
@@ -0,0 +1,112 @@
+/*
+ * linux/arch/arm/mach-msm/gpio.c
+ *
+ * Copyright (C) 2005 HP Labs
+ * Copyright (C) 2008 Google, Inc.
+ * Copyright (C) 2009 Pavel Machek <pavel@ucw.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include "board-trout.h"
+
+struct msm_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *reg; /* Base of register bank */
+ u8 shadow;
+};
+
+#define to_msm_gpio_chip(c) container_of(c, struct msm_gpio_chip, chip)
+
+static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
+ unsigned mask = 1 << offset;
+
+ return !! (readb(msm_gpio->reg) & mask);
+}
+
+static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
+ unsigned mask = 1 << offset;
+
+ if (val)
+ msm_gpio->shadow |= mask;
+ else
+ msm_gpio->shadow &= ~mask;
+
+ writeb(msm_gpio->shadow, msm_gpio->reg);
+}
+
+static int msm_gpiolib_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ msm_gpiolib_set(chip, offset, 0);
+ return 0;
+}
+
+static int msm_gpiolib_direction_output(struct gpio_chip *chip,
+ unsigned offset, int val)
+{
+ msm_gpiolib_set(chip, offset, val);
+ return 0;
+}
+
+#define TROUT_GPIO_BANK(name, reg_num, base_gpio, shadow_val) \
+ { \
+ .chip = { \
+ .label = name, \
+ .direction_input = msm_gpiolib_direction_input,\
+ .direction_output = msm_gpiolib_direction_output, \
+ .get = msm_gpiolib_get, \
+ .set = msm_gpiolib_set, \
+ .base = base_gpio, \
+ .ngpio = 8, \
+ }, \
+ .reg = (void *) reg_num + TROUT_CPLD_BASE, \
+ .shadow = shadow_val, \
+ }
+
+static struct msm_gpio_chip msm_gpio_banks[] = {
+#if defined(CONFIG_MSM_DEBUG_UART1)
+ /* H2W pins <-> UART1 */
+ TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x40),
+#else
+ /* H2W pins <-> UART3, Bluetooth <-> UART1 */
+ TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x80),
+#endif
+ /* I2C pull */
+ TROUT_GPIO_BANK("MISC3", 0x02, TROUT_GPIO_MISC3_BASE, 0x04),
+ TROUT_GPIO_BANK("MISC4", 0x04, TROUT_GPIO_MISC4_BASE, 0),
+ /* mmdi 32k en */
+ TROUT_GPIO_BANK("MISC5", 0x06, TROUT_GPIO_MISC5_BASE, 0x04),
+ TROUT_GPIO_BANK("INT2", 0x08, TROUT_GPIO_INT2_BASE, 0),
+ TROUT_GPIO_BANK("MISC1", 0x0a, TROUT_GPIO_MISC1_BASE, 0),
+ TROUT_GPIO_BANK("VIRTUAL", 0x12, TROUT_GPIO_VIRTUAL_BASE, 0),
+};
+
+/*
+ * Called from the processor-specific init to enable GPIO pin support.
+ */
+int __init trout_init_gpio(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++)
+ gpiochip_add(&msm_gpio_banks[i].chip);
+
+ return 0;
+}
+
+postcore_initcall(trout_init_gpio);
+
diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h
index 4f345a5..308c4df 100644
--- a/arch/arm/mach-msm/board-trout.h
+++ b/arch/arm/mach-msm/board-trout.h
@@ -1,5 +1,162 @@
+/* linux/arch/arm/mach-msm/board-trout.h
+** Author: Brian Swetland <swetland@google.com>
+*/
+#ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
+#define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
+
+#include <mach/board.h>
+
+#define MSM_SMI_BASE 0x00000000
+#define MSM_SMI_SIZE 0x00800000
+
+#define MSM_EBI_BASE 0x10000000
+#define MSM_EBI_SIZE 0x06e00000
+
+#define MSM_PMEM_GPU0_BASE 0x00000000
+#define MSM_PMEM_GPU0_SIZE 0x00700000
+
+#define MSM_PMEM_MDP_BASE 0x02000000
+#define MSM_PMEM_MDP_SIZE 0x00800000
+
+#define MSM_PMEM_ADSP_BASE 0x02800000
+#define MSM_PMEM_ADSP_SIZE 0x00800000
+
+#define MSM_PMEM_CAMERA_BASE 0x03000000
+#define MSM_PMEM_CAMERA_SIZE 0x00800000
+
+#define MSM_FB_BASE 0x03800000
+#define MSM_FB_SIZE 0x00100000
+
+#define MSM_LINUX_BASE MSM_EBI_BASE
+#define MSM_LINUX_SIZE 0x06500000
+
+#define MSM_PMEM_GPU1_SIZE 0x800000
+#define MSM_PMEM_GPU1_BASE MSM_RAM_CONSOLE_BASE - MSM_PMEM_GPU1_SIZE
+
+#define MSM_RAM_CONSOLE_BASE MSM_EBI_BASE + 0x6d00000
+#define MSM_RAM_CONSOLE_SIZE 128 * SZ_1K
+
+#if (MSM_FB_BASE + MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
+#error invalid memory map
+#endif
+
+#define DECLARE_MSM_IOMAP
+#include <mach/msm_iomap.h>
+
+#define TROUT_4_BALL_UP_0 1
+#define TROUT_4_BALL_LEFT_0 18
+#define TROUT_4_BALL_DOWN_0 57
+#define TROUT_4_BALL_RIGHT_0 91
+
+#define TROUT_5_BALL_UP_0 94
+#define TROUT_5_BALL_LEFT_0 18
+#define TROUT_5_BALL_DOWN_0 90
+#define TROUT_5_BALL_RIGHT_0 19
+
+#define TROUT_POWER_KEY 20
+
+#define TROUT_4_TP_LS_EN 19
+#define TROUT_5_TP_LS_EN 1
#define TROUT_CPLD_BASE 0xE8100000
#define TROUT_CPLD_START 0x98000000
#define TROUT_CPLD_SIZE SZ_4K
+#define TROUT_GPIO_CABLE_IN1 (83)
+#define TROUT_GPIO_CABLE_IN2 (49)
+
+#define TROUT_GPIO_START (128)
+
+#define TROUT_GPIO_INT_MASK0_REG (0x0c)
+#define TROUT_GPIO_INT_STAT0_REG (0x0e)
+#define TROUT_GPIO_INT_MASK1_REG (0x14)
+#define TROUT_GPIO_INT_STAT1_REG (0x10)
+
+#define TROUT_GPIO_HAPTIC_PWM (28)
+#define TROUT_GPIO_PS_HOLD (25)
+
+#define TROUT_GPIO_MISC2_BASE (TROUT_GPIO_START + 0x00)
+#define TROUT_GPIO_MISC3_BASE (TROUT_GPIO_START + 0x08)
+#define TROUT_GPIO_MISC4_BASE (TROUT_GPIO_START + 0x10)
+#define TROUT_GPIO_MISC5_BASE (TROUT_GPIO_START + 0x18)
+#define TROUT_GPIO_INT2_BASE (TROUT_GPIO_START + 0x20)
+#define TROUT_GPIO_MISC1_BASE (TROUT_GPIO_START + 0x28)
+#define TROUT_GPIO_VIRTUAL_BASE (TROUT_GPIO_START + 0x30)
+#define TROUT_GPIO_INT5_BASE (TROUT_GPIO_START + 0x48)
+
+#define TROUT_GPIO_CHARGER_EN (TROUT_GPIO_MISC2_BASE + 0)
+#define TROUT_GPIO_ISET (TROUT_GPIO_MISC2_BASE + 1)
+#define TROUT_GPIO_H2W_DAT_DIR (TROUT_GPIO_MISC2_BASE + 2)
+#define TROUT_GPIO_H2W_CLK_DIR (TROUT_GPIO_MISC2_BASE + 3)
+#define TROUT_GPIO_H2W_DAT_GPO (TROUT_GPIO_MISC2_BASE + 4)
+#define TROUT_GPIO_H2W_CLK_GPO (TROUT_GPIO_MISC2_BASE + 5)
+#define TROUT_GPIO_H2W_SEL0 (TROUT_GPIO_MISC2_BASE + 6)
+#define TROUT_GPIO_H2W_SEL1 (TROUT_GPIO_MISC2_BASE + 7)
+
+#define TROUT_GPIO_SPOTLIGHT_EN (TROUT_GPIO_MISC3_BASE + 0)
+#define TROUT_GPIO_FLASH_EN (TROUT_GPIO_MISC3_BASE + 1)
+#define TROUT_GPIO_I2C_PULL (TROUT_GPIO_MISC3_BASE + 2)
+#define TROUT_GPIO_TP_I2C_PULL (TROUT_GPIO_MISC3_BASE + 3)
+#define TROUT_GPIO_TP_EN (TROUT_GPIO_MISC3_BASE + 4)
+#define TROUT_GPIO_JOG_EN (TROUT_GPIO_MISC3_BASE + 5)
+#define TROUT_GPIO_UI_LED_EN (TROUT_GPIO_MISC3_BASE + 6)
+#define TROUT_GPIO_QTKEY_LED_EN (TROUT_GPIO_MISC3_BASE + 7)
+
+#define TROUT_GPIO_VCM_PWDN (TROUT_GPIO_MISC4_BASE + 0)
+#define TROUT_GPIO_USB_H2W_SW (TROUT_GPIO_MISC4_BASE + 1)
+#define TROUT_GPIO_COMPASS_RST_N (TROUT_GPIO_MISC4_BASE + 2)
+#define TROUT_GPIO_HAPTIC_EN_UP (TROUT_GPIO_MISC4_BASE + 3)
+#define TROUT_GPIO_HAPTIC_EN_MAIN (TROUT_GPIO_MISC4_BASE + 4)
+#define TROUT_GPIO_USB_PHY_RST_N (TROUT_GPIO_MISC4_BASE + 5)
+#define TROUT_GPIO_WIFI_PA_RESETX (TROUT_GPIO_MISC4_BASE + 6)
+#define TROUT_GPIO_WIFI_EN (TROUT_GPIO_MISC4_BASE + 7)
+
+#define TROUT_GPIO_BT_32K_EN (TROUT_GPIO_MISC5_BASE + 0)
+#define TROUT_GPIO_MAC_32K_EN (TROUT_GPIO_MISC5_BASE + 1)
+#define TROUT_GPIO_MDDI_32K_EN (TROUT_GPIO_MISC5_BASE + 2)
+#define TROUT_GPIO_COMPASS_32K_EN (TROUT_GPIO_MISC5_BASE + 3)
+
+#define TROUT_GPIO_NAVI_ACT_N (TROUT_GPIO_INT2_BASE + 0)
+#define TROUT_GPIO_COMPASS_IRQ (TROUT_GPIO_INT2_BASE + 1)
+#define TROUT_GPIO_SLIDING_DET (TROUT_GPIO_INT2_BASE + 2)
+#define TROUT_GPIO_AUD_HSMIC_DET_N (TROUT_GPIO_INT2_BASE + 3)
+#define TROUT_GPIO_SD_DOOR_N (TROUT_GPIO_INT2_BASE + 4)
+#define TROUT_GPIO_CAM_BTN_STEP1_N (TROUT_GPIO_INT2_BASE + 5)
+#define TROUT_GPIO_CAM_BTN_STEP2_N (TROUT_GPIO_INT2_BASE + 6)
+#define TROUT_GPIO_TP_ATT_N (TROUT_GPIO_INT2_BASE + 7)
+#define TROUT_GPIO_BANK0_FIRST_INT_SOURCE (TROUT_GPIO_NAVI_ACT_N)
+#define TROUT_GPIO_BANK0_LAST_INT_SOURCE (TROUT_GPIO_TP_ATT_N)
+
+#define TROUT_GPIO_H2W_DAT_GPI (TROUT_GPIO_MISC1_BASE + 0)
+#define TROUT_GPIO_H2W_CLK_GPI (TROUT_GPIO_MISC1_BASE + 1)
+#define TROUT_GPIO_CPLD128_VER_0 (TROUT_GPIO_MISC1_BASE + 4)
+#define TROUT_GPIO_CPLD128_VER_1 (TROUT_GPIO_MISC1_BASE + 5)
+#define TROUT_GPIO_CPLD128_VER_2 (TROUT_GPIO_MISC1_BASE + 6)
+#define TROUT_GPIO_CPLD128_VER_3 (TROUT_GPIO_MISC1_BASE + 7)
+
+#define TROUT_GPIO_SDMC_CD_N (TROUT_GPIO_VIRTUAL_BASE + 0)
+#define TROUT_GPIO_END (TROUT_GPIO_SDMC_CD_N)
+#define TROUT_GPIO_BANK1_FIRST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N)
+#define TROUT_GPIO_BANK1_LAST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N)
+
+#define TROUT_GPIO_VIRTUAL_TO_REAL_OFFSET \
+ (TROUT_GPIO_INT5_BASE - TROUT_GPIO_VIRTUAL_BASE)
+
+#define TROUT_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS)
+#define TROUT_INT_BANK0_COUNT (8)
+#define TROUT_INT_BANK1_START (TROUT_INT_START + TROUT_INT_BANK0_COUNT)
+#define TROUT_INT_BANK1_COUNT (1)
+#define TROUT_INT_END (TROUT_INT_START + TROUT_INT_BANK0_COUNT + \
+ TROUT_INT_BANK1_COUNT - 1)
+#define TROUT_GPIO_TO_INT(n) (((n) <= TROUT_GPIO_BANK0_LAST_INT_SOURCE) ? \
+ (TROUT_INT_START - TROUT_GPIO_BANK0_FIRST_INT_SOURCE + (n)) : \
+ (TROUT_INT_BANK1_START - TROUT_GPIO_BANK1_FIRST_INT_SOURCE + (n)))
+
+#define TROUT_INT_TO_BANK(n) ((n - TROUT_INT_START) / TROUT_INT_BANK0_COUNT)
+#define TROUT_INT_TO_MASK(n) (1U << ((n - TROUT_INT_START) & 7))
+#define TROUT_BANK_TO_MASK_REG(bank) \
+ (bank ? TROUT_GPIO_INT_MASK1_REG : TROUT_GPIO_INT_MASK0_REG)
+#define TROUT_BANK_TO_STAT_REG(bank) \
+ (bank ? TROUT_GPIO_INT_STAT1_REG : TROUT_GPIO_INT_STAT0_REG)
+
+#endif /* GUARD */
--
1.6.2.3
WARNING: multiple messages have this Message-ID (diff)
From: dwalker@codeaurora.org (Daniel Walker)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] arm: msm: GPIO support for HTC Dream
Date: Tue, 30 Mar 2010 16:11:55 -0700 [thread overview]
Message-ID: <1269990717-2969-2-git-send-email-dwalker@codeaurora.org> (raw)
In-Reply-To: <1269990717-2969-1-git-send-email-dwalker@codeaurora.org>
From: Pavel Machek <pavel@ucw.cz>
Add GPIO support for HTC Dream.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
[dwalker at codeaurora.org: renamed to trout]
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
---
arch/arm/mach-msm/Makefile | 2 +-
arch/arm/mach-msm/board-trout-gpio.c | 112 ++++++++++++++++++++++++
arch/arm/mach-msm/board-trout.h | 157 ++++++++++++++++++++++++++++++++++
3 files changed, 270 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-msm/board-trout-gpio.c
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 47d47cb..fb9ab2d 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -9,5 +9,5 @@ obj-y += gpio.o
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-obj-$(CONFIG_MACH_TROUT) += board-trout.o
+obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o
diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c
new file mode 100644
index 0000000..6e6bc76
--- /dev/null
+++ b/arch/arm/mach-msm/board-trout-gpio.c
@@ -0,0 +1,112 @@
+/*
+ * linux/arch/arm/mach-msm/gpio.c
+ *
+ * Copyright (C) 2005 HP Labs
+ * Copyright (C) 2008 Google, Inc.
+ * Copyright (C) 2009 Pavel Machek <pavel@ucw.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include "board-trout.h"
+
+struct msm_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *reg; /* Base of register bank */
+ u8 shadow;
+};
+
+#define to_msm_gpio_chip(c) container_of(c, struct msm_gpio_chip, chip)
+
+static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
+ unsigned mask = 1 << offset;
+
+ return !! (readb(msm_gpio->reg) & mask);
+}
+
+static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
+ unsigned mask = 1 << offset;
+
+ if (val)
+ msm_gpio->shadow |= mask;
+ else
+ msm_gpio->shadow &= ~mask;
+
+ writeb(msm_gpio->shadow, msm_gpio->reg);
+}
+
+static int msm_gpiolib_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ msm_gpiolib_set(chip, offset, 0);
+ return 0;
+}
+
+static int msm_gpiolib_direction_output(struct gpio_chip *chip,
+ unsigned offset, int val)
+{
+ msm_gpiolib_set(chip, offset, val);
+ return 0;
+}
+
+#define TROUT_GPIO_BANK(name, reg_num, base_gpio, shadow_val) \
+ { \
+ .chip = { \
+ .label = name, \
+ .direction_input = msm_gpiolib_direction_input,\
+ .direction_output = msm_gpiolib_direction_output, \
+ .get = msm_gpiolib_get, \
+ .set = msm_gpiolib_set, \
+ .base = base_gpio, \
+ .ngpio = 8, \
+ }, \
+ .reg = (void *) reg_num + TROUT_CPLD_BASE, \
+ .shadow = shadow_val, \
+ }
+
+static struct msm_gpio_chip msm_gpio_banks[] = {
+#if defined(CONFIG_MSM_DEBUG_UART1)
+ /* H2W pins <-> UART1 */
+ TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x40),
+#else
+ /* H2W pins <-> UART3, Bluetooth <-> UART1 */
+ TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x80),
+#endif
+ /* I2C pull */
+ TROUT_GPIO_BANK("MISC3", 0x02, TROUT_GPIO_MISC3_BASE, 0x04),
+ TROUT_GPIO_BANK("MISC4", 0x04, TROUT_GPIO_MISC4_BASE, 0),
+ /* mmdi 32k en */
+ TROUT_GPIO_BANK("MISC5", 0x06, TROUT_GPIO_MISC5_BASE, 0x04),
+ TROUT_GPIO_BANK("INT2", 0x08, TROUT_GPIO_INT2_BASE, 0),
+ TROUT_GPIO_BANK("MISC1", 0x0a, TROUT_GPIO_MISC1_BASE, 0),
+ TROUT_GPIO_BANK("VIRTUAL", 0x12, TROUT_GPIO_VIRTUAL_BASE, 0),
+};
+
+/*
+ * Called from the processor-specific init to enable GPIO pin support.
+ */
+int __init trout_init_gpio(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++)
+ gpiochip_add(&msm_gpio_banks[i].chip);
+
+ return 0;
+}
+
+postcore_initcall(trout_init_gpio);
+
diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h
index 4f345a5..308c4df 100644
--- a/arch/arm/mach-msm/board-trout.h
+++ b/arch/arm/mach-msm/board-trout.h
@@ -1,5 +1,162 @@
+/* linux/arch/arm/mach-msm/board-trout.h
+** Author: Brian Swetland <swetland@google.com>
+*/
+#ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
+#define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
+
+#include <mach/board.h>
+
+#define MSM_SMI_BASE 0x00000000
+#define MSM_SMI_SIZE 0x00800000
+
+#define MSM_EBI_BASE 0x10000000
+#define MSM_EBI_SIZE 0x06e00000
+
+#define MSM_PMEM_GPU0_BASE 0x00000000
+#define MSM_PMEM_GPU0_SIZE 0x00700000
+
+#define MSM_PMEM_MDP_BASE 0x02000000
+#define MSM_PMEM_MDP_SIZE 0x00800000
+
+#define MSM_PMEM_ADSP_BASE 0x02800000
+#define MSM_PMEM_ADSP_SIZE 0x00800000
+
+#define MSM_PMEM_CAMERA_BASE 0x03000000
+#define MSM_PMEM_CAMERA_SIZE 0x00800000
+
+#define MSM_FB_BASE 0x03800000
+#define MSM_FB_SIZE 0x00100000
+
+#define MSM_LINUX_BASE MSM_EBI_BASE
+#define MSM_LINUX_SIZE 0x06500000
+
+#define MSM_PMEM_GPU1_SIZE 0x800000
+#define MSM_PMEM_GPU1_BASE MSM_RAM_CONSOLE_BASE - MSM_PMEM_GPU1_SIZE
+
+#define MSM_RAM_CONSOLE_BASE MSM_EBI_BASE + 0x6d00000
+#define MSM_RAM_CONSOLE_SIZE 128 * SZ_1K
+
+#if (MSM_FB_BASE + MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
+#error invalid memory map
+#endif
+
+#define DECLARE_MSM_IOMAP
+#include <mach/msm_iomap.h>
+
+#define TROUT_4_BALL_UP_0 1
+#define TROUT_4_BALL_LEFT_0 18
+#define TROUT_4_BALL_DOWN_0 57
+#define TROUT_4_BALL_RIGHT_0 91
+
+#define TROUT_5_BALL_UP_0 94
+#define TROUT_5_BALL_LEFT_0 18
+#define TROUT_5_BALL_DOWN_0 90
+#define TROUT_5_BALL_RIGHT_0 19
+
+#define TROUT_POWER_KEY 20
+
+#define TROUT_4_TP_LS_EN 19
+#define TROUT_5_TP_LS_EN 1
#define TROUT_CPLD_BASE 0xE8100000
#define TROUT_CPLD_START 0x98000000
#define TROUT_CPLD_SIZE SZ_4K
+#define TROUT_GPIO_CABLE_IN1 (83)
+#define TROUT_GPIO_CABLE_IN2 (49)
+
+#define TROUT_GPIO_START (128)
+
+#define TROUT_GPIO_INT_MASK0_REG (0x0c)
+#define TROUT_GPIO_INT_STAT0_REG (0x0e)
+#define TROUT_GPIO_INT_MASK1_REG (0x14)
+#define TROUT_GPIO_INT_STAT1_REG (0x10)
+
+#define TROUT_GPIO_HAPTIC_PWM (28)
+#define TROUT_GPIO_PS_HOLD (25)
+
+#define TROUT_GPIO_MISC2_BASE (TROUT_GPIO_START + 0x00)
+#define TROUT_GPIO_MISC3_BASE (TROUT_GPIO_START + 0x08)
+#define TROUT_GPIO_MISC4_BASE (TROUT_GPIO_START + 0x10)
+#define TROUT_GPIO_MISC5_BASE (TROUT_GPIO_START + 0x18)
+#define TROUT_GPIO_INT2_BASE (TROUT_GPIO_START + 0x20)
+#define TROUT_GPIO_MISC1_BASE (TROUT_GPIO_START + 0x28)
+#define TROUT_GPIO_VIRTUAL_BASE (TROUT_GPIO_START + 0x30)
+#define TROUT_GPIO_INT5_BASE (TROUT_GPIO_START + 0x48)
+
+#define TROUT_GPIO_CHARGER_EN (TROUT_GPIO_MISC2_BASE + 0)
+#define TROUT_GPIO_ISET (TROUT_GPIO_MISC2_BASE + 1)
+#define TROUT_GPIO_H2W_DAT_DIR (TROUT_GPIO_MISC2_BASE + 2)
+#define TROUT_GPIO_H2W_CLK_DIR (TROUT_GPIO_MISC2_BASE + 3)
+#define TROUT_GPIO_H2W_DAT_GPO (TROUT_GPIO_MISC2_BASE + 4)
+#define TROUT_GPIO_H2W_CLK_GPO (TROUT_GPIO_MISC2_BASE + 5)
+#define TROUT_GPIO_H2W_SEL0 (TROUT_GPIO_MISC2_BASE + 6)
+#define TROUT_GPIO_H2W_SEL1 (TROUT_GPIO_MISC2_BASE + 7)
+
+#define TROUT_GPIO_SPOTLIGHT_EN (TROUT_GPIO_MISC3_BASE + 0)
+#define TROUT_GPIO_FLASH_EN (TROUT_GPIO_MISC3_BASE + 1)
+#define TROUT_GPIO_I2C_PULL (TROUT_GPIO_MISC3_BASE + 2)
+#define TROUT_GPIO_TP_I2C_PULL (TROUT_GPIO_MISC3_BASE + 3)
+#define TROUT_GPIO_TP_EN (TROUT_GPIO_MISC3_BASE + 4)
+#define TROUT_GPIO_JOG_EN (TROUT_GPIO_MISC3_BASE + 5)
+#define TROUT_GPIO_UI_LED_EN (TROUT_GPIO_MISC3_BASE + 6)
+#define TROUT_GPIO_QTKEY_LED_EN (TROUT_GPIO_MISC3_BASE + 7)
+
+#define TROUT_GPIO_VCM_PWDN (TROUT_GPIO_MISC4_BASE + 0)
+#define TROUT_GPIO_USB_H2W_SW (TROUT_GPIO_MISC4_BASE + 1)
+#define TROUT_GPIO_COMPASS_RST_N (TROUT_GPIO_MISC4_BASE + 2)
+#define TROUT_GPIO_HAPTIC_EN_UP (TROUT_GPIO_MISC4_BASE + 3)
+#define TROUT_GPIO_HAPTIC_EN_MAIN (TROUT_GPIO_MISC4_BASE + 4)
+#define TROUT_GPIO_USB_PHY_RST_N (TROUT_GPIO_MISC4_BASE + 5)
+#define TROUT_GPIO_WIFI_PA_RESETX (TROUT_GPIO_MISC4_BASE + 6)
+#define TROUT_GPIO_WIFI_EN (TROUT_GPIO_MISC4_BASE + 7)
+
+#define TROUT_GPIO_BT_32K_EN (TROUT_GPIO_MISC5_BASE + 0)
+#define TROUT_GPIO_MAC_32K_EN (TROUT_GPIO_MISC5_BASE + 1)
+#define TROUT_GPIO_MDDI_32K_EN (TROUT_GPIO_MISC5_BASE + 2)
+#define TROUT_GPIO_COMPASS_32K_EN (TROUT_GPIO_MISC5_BASE + 3)
+
+#define TROUT_GPIO_NAVI_ACT_N (TROUT_GPIO_INT2_BASE + 0)
+#define TROUT_GPIO_COMPASS_IRQ (TROUT_GPIO_INT2_BASE + 1)
+#define TROUT_GPIO_SLIDING_DET (TROUT_GPIO_INT2_BASE + 2)
+#define TROUT_GPIO_AUD_HSMIC_DET_N (TROUT_GPIO_INT2_BASE + 3)
+#define TROUT_GPIO_SD_DOOR_N (TROUT_GPIO_INT2_BASE + 4)
+#define TROUT_GPIO_CAM_BTN_STEP1_N (TROUT_GPIO_INT2_BASE + 5)
+#define TROUT_GPIO_CAM_BTN_STEP2_N (TROUT_GPIO_INT2_BASE + 6)
+#define TROUT_GPIO_TP_ATT_N (TROUT_GPIO_INT2_BASE + 7)
+#define TROUT_GPIO_BANK0_FIRST_INT_SOURCE (TROUT_GPIO_NAVI_ACT_N)
+#define TROUT_GPIO_BANK0_LAST_INT_SOURCE (TROUT_GPIO_TP_ATT_N)
+
+#define TROUT_GPIO_H2W_DAT_GPI (TROUT_GPIO_MISC1_BASE + 0)
+#define TROUT_GPIO_H2W_CLK_GPI (TROUT_GPIO_MISC1_BASE + 1)
+#define TROUT_GPIO_CPLD128_VER_0 (TROUT_GPIO_MISC1_BASE + 4)
+#define TROUT_GPIO_CPLD128_VER_1 (TROUT_GPIO_MISC1_BASE + 5)
+#define TROUT_GPIO_CPLD128_VER_2 (TROUT_GPIO_MISC1_BASE + 6)
+#define TROUT_GPIO_CPLD128_VER_3 (TROUT_GPIO_MISC1_BASE + 7)
+
+#define TROUT_GPIO_SDMC_CD_N (TROUT_GPIO_VIRTUAL_BASE + 0)
+#define TROUT_GPIO_END (TROUT_GPIO_SDMC_CD_N)
+#define TROUT_GPIO_BANK1_FIRST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N)
+#define TROUT_GPIO_BANK1_LAST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N)
+
+#define TROUT_GPIO_VIRTUAL_TO_REAL_OFFSET \
+ (TROUT_GPIO_INT5_BASE - TROUT_GPIO_VIRTUAL_BASE)
+
+#define TROUT_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS)
+#define TROUT_INT_BANK0_COUNT (8)
+#define TROUT_INT_BANK1_START (TROUT_INT_START + TROUT_INT_BANK0_COUNT)
+#define TROUT_INT_BANK1_COUNT (1)
+#define TROUT_INT_END (TROUT_INT_START + TROUT_INT_BANK0_COUNT + \
+ TROUT_INT_BANK1_COUNT - 1)
+#define TROUT_GPIO_TO_INT(n) (((n) <= TROUT_GPIO_BANK0_LAST_INT_SOURCE) ? \
+ (TROUT_INT_START - TROUT_GPIO_BANK0_FIRST_INT_SOURCE + (n)) : \
+ (TROUT_INT_BANK1_START - TROUT_GPIO_BANK1_FIRST_INT_SOURCE + (n)))
+
+#define TROUT_INT_TO_BANK(n) ((n - TROUT_INT_START) / TROUT_INT_BANK0_COUNT)
+#define TROUT_INT_TO_MASK(n) (1U << ((n - TROUT_INT_START) & 7))
+#define TROUT_BANK_TO_MASK_REG(bank) \
+ (bank ? TROUT_GPIO_INT_MASK1_REG : TROUT_GPIO_INT_MASK0_REG)
+#define TROUT_BANK_TO_STAT_REG(bank) \
+ (bank ? TROUT_GPIO_INT_STAT1_REG : TROUT_GPIO_INT_STAT0_REG)
+
+#endif /* GUARD */
--
1.6.2.3
next prev parent reply other threads:[~2010-03-30 23:10 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-30 23:11 [PATCH 1/4] arm: msm: gpio support Daniel Walker
2010-03-30 23:11 ` Daniel Walker
2010-03-30 23:11 ` Daniel Walker [this message]
2010-03-30 23:11 ` [PATCH 2/4] arm: msm: GPIO support for HTC Dream Daniel Walker
2010-03-30 23:11 ` [PATCH 3/4] arm: msm: trout: add trout specific gpio interrupts Daniel Walker
2010-03-30 23:11 ` Daniel Walker
2010-03-30 23:11 ` [PATCH 4/4] arm: msm: trout add mmc support Daniel Walker
2010-03-30 23:11 ` Daniel Walker
2010-03-30 23:58 ` [PATCH 1/4] arm: msm: gpio support H Hartley Sweeten
2010-03-30 23:58 ` H Hartley Sweeten
2010-03-31 1:14 ` Arve Hjønnevåg
2010-03-31 1:14 ` Arve Hjønnevåg
2010-03-31 14:03 ` Daniel Walker
2010-03-31 14:03 ` Daniel Walker
2010-03-31 21:21 ` Arve Hjønnevåg
2010-03-31 21:21 ` Arve Hjønnevåg
2010-03-31 22:53 ` Daniel Walker
2010-03-31 22:53 ` Daniel Walker
2010-04-06 13:32 ` Pavel Machek
2010-04-06 13:32 ` Pavel Machek
2010-03-31 14:12 ` Daniel Walker
2010-03-31 14:12 ` Daniel Walker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1269990717-2969-2-git-send-email-dwalker@codeaurora.org \
--to=dwalker@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=pavel@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.