* [PATCH] Staging: comedi: Fix Checkpatch.pl issues in mpc624.c This patch resolves all checkpatch.pl issues in the mpc624.c file
@ 2010-05-03 9:35 Iain Churcher
0 siblings, 0 replies; only message in thread
From: Iain Churcher @ 2010-05-03 9:35 UTC (permalink / raw)
To: iain.linux.coding, gregkh, wfp5p, jkosina, mithlesh; +Cc: devel, linux-kernel
Signed-off-by: Iain Churcher <iain.linux.coding@googlemail.com>
---
drivers/staging/comedi/drivers/mpc624.c | 185 +++++++++++++++++--------------
1 files changed, 104 insertions(+), 81 deletions(-)
diff --git a/drivers/staging/comedi/drivers/mpc624.c b/drivers/staging/comedi/drivers/mpc624.c
index 12e72c8..9874ac3 100644
--- a/drivers/staging/comedi/drivers/mpc624.c
+++ b/drivers/staging/comedi/drivers/mpc624.c
@@ -40,20 +40,20 @@ Status: working
Configuration Options:
[0] - I/O base address
[1] - convertion rate
- Convertion rate RMS noise Effective Number Of Bits
- 0 3.52kHz 23uV 17
- 1 1.76kHz 3.5uV 20
- 2 880Hz 2uV 21.3
- 3 440Hz 1.4uV 21.8
- 4 220Hz 1uV 22.4
- 5 110Hz 750uV 22.9
- 6 55Hz 510nV 23.4
- 7 27.5Hz 375nV 24
- 8 13.75Hz 250nV 24.4
- 9 6.875Hz 200nV 24.6
- [2] - voltage range
- 0 -1.01V .. +1.01V
- 1 -10.1V .. +10.1V
+ Convertion rate RMS noise Effective Number Of Bits
+ 0 3.52kHz 23uV 17
+ 1 1.76kHz 3.5uV 20
+ 2 880Hz 2uV 21.3
+ 3 440Hz 1.4uV 21.8
+ 4 220Hz 1uV 22.4
+ 5 110Hz 750uV 22.9
+ 6 55Hz 510nV 23.4
+ 7 27.5Hz 375nV 24
+ 8 13.75Hz 250nV 24.4
+ 9 6.875Hz 200nV 24.6
+ [2] - voltage range
+ 0 -1.01V .. +1.01V
+ 1 -10.1V .. +10.1V
*/
#include "../comedidev.h"
@@ -65,13 +65,13 @@ Configuration Options:
#define MPC624_SIZE 16
/* Offsets of different ports */
-#define MPC624_MASTER_CONTROL 0 /* not used */
-#define MPC624_GNMUXCH 1 /* Gain, Mux, Channel of ADC */
-#define MPC624_ADC 2 /* read/write to/from ADC */
-#define MPC624_EE 3 /* read/write to/from serial EEPROM via I2C */
-#define MPC624_LEDS 4 /* write to LEDs */
-#define MPC624_DIO 5 /* read/write to/from digital I/O ports */
-#define MPC624_IRQ_MASK 6 /* IRQ masking enable/disable */
+#define MPC624_MASTER_CONTROL 0 /* not used */
+#define MPC624_GNMUXCH 1 /* Gain, Mux, Channel of ADC */
+#define MPC624_ADC 2 /* read/write to/from ADC */
+#define MPC624_EE 3 /* read/write to/from serial EEPROM via I2C */
+#define MPC624_LEDS 4 /* write to LEDs */
+#define MPC624_DIO 5 /* read/write to/from digital I/O ports */
+#define MPC624_IRQ_MASK 6 /* IRQ masking enable/disable */
/* Register bits' names */
#define MPC624_ADBUSY (1<<5)
@@ -109,24 +109,27 @@ Configuration Options:
* ^ - Effective Number Of Bits
*/
-#define MPC624_SPEED_3_52_kHz (MPC624_OSR4 | MPC624_OSR0)
-#define MPC624_SPEED_1_76_kHz (MPC624_OSR4 | MPC624_OSR1)
-#define MPC624_SPEED_880_Hz (MPC624_OSR4 | MPC624_OSR1 | MPC624_OSR0)
-#define MPC624_SPEED_440_Hz (MPC624_OSR4 | MPC624_OSR2)
-#define MPC624_SPEED_220_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR0)
-#define MPC624_SPEED_110_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR1)
-#define MPC624_SPEED_55_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
-#define MPC624_SPEED_27_5_Hz (MPC624_OSR4 | MPC624_OSR3)
-#define MPC624_SPEED_13_75_Hz (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR0)
-#define MPC624_SPEED_6_875_Hz (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
-/* ---------------------------------------------------------------------------- */
+#define MPC624_SPEED_3_52_kHz (MPC624_OSR4 | MPC624_OSR0)
+#define MPC624_SPEED_1_76_kHz (MPC624_OSR4 | MPC624_OSR1)
+#define MPC624_SPEED_880_Hz (MPC624_OSR4 | MPC624_OSR1 | MPC624_OSR0)
+#define MPC624_SPEED_440_Hz (MPC624_OSR4 | MPC624_OSR2)
+#define MPC624_SPEED_220_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR0)
+#define MPC624_SPEED_110_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR1)
+#define MPC624_SPEED_55_Hz \
+ (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
+#define MPC624_SPEED_27_5_Hz (MPC624_OSR4 | MPC624_OSR3)
+#define MPC624_SPEED_13_75_Hz (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR0)
+#define MPC624_SPEED_6_875_Hz \
+ (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
+/* -------------------------------------------------------------------------- */
struct skel_private {
- unsigned long int ulConvertionRate; /* set by mpc624_attach() from driver's parameters */
+ /* set by mpc624_attach() from driver's parameters */
+ unsigned long int ulConvertionRate;
};
#define devpriv ((struct skel_private *)dev->private)
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------------- */
static const struct comedi_lrange range_mpc624_bipolar1 = {
1,
{
@@ -145,11 +148,11 @@ static const struct comedi_lrange range_mpc624_bipolar10 = {
}
};
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------------- */
static int mpc624_attach(struct comedi_device *dev,
struct comedi_devconfig *it);
static int mpc624_detach(struct comedi_device *dev);
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------------- */
static struct comedi_driver driver_mpc624 = {
.driver_name = "mpc624",
.module = THIS_MODULE,
@@ -157,20 +160,20 @@ static struct comedi_driver driver_mpc624 = {
.detach = mpc624_detach
};
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------------- */
static int mpc624_ai_rinsn(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data);
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------------- */
static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
struct comedi_subdevice *s;
unsigned long iobase;
iobase = it->options[0];
- printk("comedi%d: mpc624 [0x%04lx, ", dev->minor, iobase);
+ printk(KERN_INFO "comedi%d: mpc624 [0x%04lx, ", dev->minor, iobase);
if (request_region(iobase, MPC624_SIZE, "mpc624") == NULL) {
- printk("I/O port(s) in use\n");
+ printk(KERN_ERR "I/O port(s) in use\n");
return -EIO;
}
@@ -184,47 +187,48 @@ static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
switch (it->options[1]) {
case 0:
devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
- printk("3.52 kHz, ");
+ printk(KERN_INFO "3.52 kHz, ");
break;
case 1:
devpriv->ulConvertionRate = MPC624_SPEED_1_76_kHz;
- printk("1.76 kHz, ");
+ printk(KERN_INFO "1.76 kHz, ");
break;
case 2:
devpriv->ulConvertionRate = MPC624_SPEED_880_Hz;
- printk("880 Hz, ");
+ printk(KERN_INFO "880 Hz, ");
break;
case 3:
devpriv->ulConvertionRate = MPC624_SPEED_440_Hz;
- printk("440 Hz, ");
+ printk(KERN_INFO "440 Hz, ");
break;
case 4:
devpriv->ulConvertionRate = MPC624_SPEED_220_Hz;
- printk("220 Hz, ");
+ printk(KERN_INFO "220 Hz, ");
break;
case 5:
devpriv->ulConvertionRate = MPC624_SPEED_110_Hz;
- printk("110 Hz, ");
+ printk(KERN_INFO "110 Hz, ");
break;
case 6:
devpriv->ulConvertionRate = MPC624_SPEED_55_Hz;
- printk("55 Hz, ");
+ printk(KERN_INFO "55 Hz, ");
break;
case 7:
devpriv->ulConvertionRate = MPC624_SPEED_27_5_Hz;
- printk("27.5 Hz, ");
+ printk(KERN_INFO "27.5 Hz, ");
break;
case 8:
devpriv->ulConvertionRate = MPC624_SPEED_13_75_Hz;
- printk("13.75 Hz, ");
+ printk(KERN_INFO "13.75 Hz, ");
break;
case 9:
devpriv->ulConvertionRate = MPC624_SPEED_6_875_Hz;
- printk("6.875 Hz, ");
+ printk(KERN_INFO "6.875 Hz, ");
break;
default:
printk
- ("illegal convertion rate setting! Valid numbers are 0..9. Using 9 => 6.875 Hz, ");
+ (KERN_ERR "illegal convertion rate setting!"
+ " Valid numbers are 0..9. Using 9 => 6.875 Hz, ");
devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
}
@@ -239,29 +243,29 @@ static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
switch (it->options[1]) {
default:
s->maxdata = 0x3FFFFFFF;
- printk("30 bit, ");
+ printk(KERN_INFO "30 bit, ");
}
switch (it->options[1]) {
case 0:
s->range_table = &range_mpc624_bipolar1;
- printk("1.01V]: ");
+ printk(KERN_INFO "1.01V]: ");
break;
default:
s->range_table = &range_mpc624_bipolar10;
- printk("10.1V]: ");
+ printk(KERN_INFO "10.1V]: ");
}
s->len_chanlist = 1;
s->insn_read = mpc624_ai_rinsn;
- printk("attached\n");
+ printk(KERN_INFO "attached\n");
return 1;
}
static int mpc624_detach(struct comedi_device *dev)
{
- printk("comedi%d: mpc624: remove\n", dev->minor);
+ printk(KERN_INFO "comedi%d: mpc624: remove\n", dev->minor);
if (dev->iobase)
release_region(dev->iobase, MPC624_SIZE);
@@ -280,11 +284,14 @@ static int mpc624_ai_rinsn(struct comedi_device *dev,
unsigned long int data_in, data_out;
unsigned char ucPort;
- /* WARNING: We always write 0 to GNSWA bit, so the channel range is +-/10.1Vdc */
+ /*
+ * WARNING:
+ * We always write 0 to GNSWA bit, so the channel range is +-/10.1Vdc
+ */
outb(insn->chanspec, dev->iobase + MPC624_GNMUXCH);
-/* printk("Channel %d: \n", insn->chanspec); */
+/* printk("Channel %d:\n", insn->chanspec); */
if (!insn->n) {
- printk("MPC624: Warning, no data to acquire\n");
+ printk(KERN_INFO "MPC624: Warning, no data to acquire\n");
return 0;
}
@@ -306,7 +313,7 @@ static int mpc624_ai_rinsn(struct comedi_device *dev,
break;
}
if (i == TIMEOUT) {
- printk("MPC624: timeout (%dms)\n", TIMEOUT);
+ printk(KERN_ERR "MPC624: timeout (%dms)\n", TIMEOUT);
data[n] = 0;
return -ETIMEDOUT;
}
@@ -319,7 +326,7 @@ static int mpc624_ai_rinsn(struct comedi_device *dev,
outb(0, dev->iobase + MPC624_ADC);
udelay(1);
- if (data_out & (1 << 31)) { /* the next bit is a 1 */
+ if (data_out & (1 << 31)) { /* the next bit is a 1 */
/* Set the ADSDI line (send to MPC624) */
outb(MPC624_ADSDI, dev->iobase + MPC624_ADC);
udelay(1);
@@ -344,31 +351,47 @@ static int mpc624_ai_rinsn(struct comedi_device *dev,
data_out <<= 1;
}
- /* Received 32-bit long value consist of: */
- /* 31: EOC (End Of Transmission) bit - should be 0 */
- /* 30: DMY (Dummy) bit - should be 0 */
- /* 29: SIG (Sign) bit - 1 if the voltage is positive, 0 if negative */
- /* 28: MSB (Most Significant Bit) - the first bit of convertion result */
- /* .... */
- /* 05: LSB (Least Significant Bit) - the last bit of convertion result */
- /* 04: sub-LSB - sub-LSBs are basically noise, but when */
- /* 03: sub-LSB averaged properly, they can increase convertion */
- /* 02: sub-LSB precision up to 29 bits; they can be discarded */
- /* 01: sub-LSB without loss of resolution. */
- /* 00: sub-LSB */
+ /*
+ * Received 32-bit long value consist of:
+ * 31: EOC -
+ * (End Of Transmission) bit - should be 0
+ * 30: DMY
+ * (Dummy) bit - should be 0
+ * 29: SIG
+ * (Sign) bit- 1 if the voltage is positive,
+ * 0 if negative
+ * 28: MSB
+ * (Most Significant Bit) - the first bit of
+ * the conversion result
+ * ....
+ * 05: LSB
+ * (Least Significant Bit)- the last bit of the
+ * conversion result
+ * 04-00: sub-LSB
+ * - sub-LSBs are basically noise, but when
+ * averaged properly, they can increase conversion
+ * precision up to 29 bits; they can be discarded
+ * without loss of resolution.
+ */
if (data_in & MPC624_EOC_BIT)
- printk("MPC624: EOC bit is set (data_in=%lu)!",
+ printk(KERN_INFO "MPC624:EOC bit is set (data_in=%lu)!",
data_in);
if (data_in & MPC624_DMY_BIT)
- printk("MPC624: DMY bit is set (data_in=%lu)!",
+ printk(KERN_INFO "MPC624:DMY bit is set (data_in=%lu)!",
data_in);
- if (data_in & MPC624_SGN_BIT) { /* check the sign bit *//* The voltage is positive */
- data_in &= 0x3FFFFFFF; /* EOC and DMY should be 0, but we will mask them out just to be sure */
- data[n] = data_in; /* comedi operates on unsigned numbers, so we don't clear the SGN bit */
- /* SGN bit is still set! It's correct, since we're converting to unsigned. */
- } else { /* The voltage is negative */
- /* data_in contains a number in 30-bit two's complement code and we must deal with it */
+ if (data_in & MPC624_SGN_BIT) { /* Volatge is positive */
+ /*
+ * comedi operates on unsigned numbers, so mask off EOC
+ * and DMY and don't clear the SGN bit
+ */
+ data_in &= 0x3FFFFFFF;
+ data[n] = data_in;
+ } else { /* The voltage is negative */
+ /*
+ * data_in contains a number in 30-bit two's complement
+ * code and we must deal with it
+ */
data_in |= MPC624_SGN_BIT;
data_in = ~data_in;
data_in += 1;
--
1.7.0.4
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2010-05-03 9:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-03 9:35 [PATCH] Staging: comedi: Fix Checkpatch.pl issues in mpc624.c This patch resolves all checkpatch.pl issues in the mpc624.c file Iain Churcher
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.