From: Tejun Heo <tj@kernel.org>
To: jeff@garzik.org, linux-ide@vger.kernel.org, sshtylyov@mvista.com
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 09/23] libata-sff: clean up inheritance in several drivers
Date: Mon, 10 May 2010 21:41:33 +0200 [thread overview]
Message-ID: <1273520507-32459-10-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1273520507-32459-1-git-send-email-tj@kernel.org>
1. pata_cmd640 is PIO only. Inherit from sff.
2. pata_macio is BMDMA. Inherit from bmdma and drop explicit
bmdma_mode_filter() setting.
3. In pata_marvell, unlike mv5, mv6 is BMDMA. Inherit from bmdma and
don't clear ->post_internal_cmd().
4. bf54x and icside are quasi-BMDMA controllers which don't use the
standard BMDMA registers so they don't initialize bmdma_addr and
inherit from sff to avoid the default mode_filter which disables
DMA modes if bmdma_addr is not initialized.
For 2 and 3, this patch makes the drivers explicitly specify
->mode_filter to ATA_OP_NULL while inheriting from ata_bmdma_port_ops.
These will be removed by the next patch.
This patch makes all and only BMDMA drivers inherit from
ata_bmdma_port_ops to ease further SFF/BMDMA separation.
Signed-off-by: Tejun Heo <tj@kernel.org>
---
drivers/ata/pata_bf54x.c | 4 +++-
drivers/ata/pata_cmd640.c | 4 ++--
drivers/ata/pata_icside.c | 4 +++-
drivers/ata/pata_macio.c | 3 +--
drivers/ata/sata_mv.c | 24 ++++++++++++++++++++----
5 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 7df072a..5c189ff 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1459,7 +1459,7 @@ static struct scsi_host_template bfin_sht = {
};
static struct ata_port_operations bfin_pata_ops = {
- .inherits = &ata_sff_port_ops,
+ .inherits = &ata_bmdma_port_ops,
.set_piomode = bfin_set_piomode,
.set_dmamode = bfin_set_dmamode,
@@ -1489,6 +1489,8 @@ static struct ata_port_operations bfin_pata_ops = {
.port_start = bfin_port_start,
.port_stop = bfin_port_stop,
+
+ .mode_filter = ATA_OP_NULL, /* will be removed soon */
};
static struct ata_port_info bfin_port_info[] = {
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 45896b3..a792eb3 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -166,11 +166,11 @@ static int cmd640_port_start(struct ata_port *ap)
}
static struct scsi_host_template cmd640_sht = {
- ATA_BMDMA_SHT(DRV_NAME),
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations cmd640_port_ops = {
- .inherits = &ata_bmdma_port_ops,
+ .inherits = &ata_sff_port_ops,
/* In theory xfer_noirq is not needed once we kill the prefetcher */
.sff_data_xfer = ata_sff_data_xfer_noirq,
.qc_issue = cmd640_qc_issue,
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index fa812e2..832c8cc 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -321,7 +321,7 @@ static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
}
static struct ata_port_operations pata_icside_port_ops = {
- .inherits = &ata_sff_port_ops,
+ .inherits = &ata_bmdma_port_ops,
/* no need to build any PRD tables for DMA */
.qc_prep = ata_noop_qc_prep,
.sff_data_xfer = ata_sff_data_xfer_noirq,
@@ -334,6 +334,8 @@ static struct ata_port_operations pata_icside_port_ops = {
.set_dmamode = pata_icside_set_dmamode,
.postreset = pata_icside_postreset,
.post_internal_cmd = pata_icside_bmdma_stop,
+
+ .mode_filter = ATA_OP_NULL, /* will be removed soon */
};
static void __devinit
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index 211b643..17e4e5d 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -917,7 +917,7 @@ static struct scsi_host_template pata_macio_sht = {
};
static struct ata_port_operations pata_macio_ops = {
- .inherits = &ata_sff_port_ops,
+ .inherits = &ata_bmdma_port_ops,
.freeze = pata_macio_freeze,
.set_piomode = pata_macio_set_timings,
@@ -925,7 +925,6 @@ static struct ata_port_operations pata_macio_ops = {
.cable_detect = pata_macio_cable_detect,
.sff_dev_select = pata_macio_dev_select,
.qc_prep = pata_macio_qc_prep,
- .mode_filter = ata_bmdma_mode_filter,
.bmdma_setup = pata_macio_bmdma_setup,
.bmdma_start = pata_macio_bmdma_start,
.bmdma_stop = pata_macio_bmdma_stop,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 318862e..a033710 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -686,16 +686,27 @@ static struct ata_port_operations mv5_ops = {
};
static struct ata_port_operations mv6_ops = {
- .inherits = &mv5_ops,
+ .inherits = &ata_bmdma_port_ops,
+
+ .lost_interrupt = ATA_OP_NULL,
+
+ .qc_defer = mv_qc_defer,
+ .qc_prep = mv_qc_prep,
+ .qc_issue = mv_qc_issue,
+
.dev_config = mv6_dev_config,
- .scr_read = mv_scr_read,
- .scr_write = mv_scr_write,
+ .freeze = mv_eh_freeze,
+ .thaw = mv_eh_thaw,
+ .hardreset = mv_hardreset,
+ .softreset = mv_softreset,
.pmp_hardreset = mv_pmp_hardreset,
.pmp_softreset = mv_softreset,
- .softreset = mv_softreset,
.error_handler = mv_pmp_error_handler,
+ .scr_read = mv_scr_read,
+ .scr_write = mv_scr_write,
+
.sff_check_status = mv_sff_check_status,
.sff_irq_clear = mv_sff_irq_clear,
.check_atapi_dma = mv_check_atapi_dma,
@@ -703,6 +714,11 @@ static struct ata_port_operations mv6_ops = {
.bmdma_start = mv_bmdma_start,
.bmdma_stop = mv_bmdma_stop,
.bmdma_status = mv_bmdma_status,
+
+ .port_start = mv_port_start,
+ .port_stop = mv_port_stop,
+
+ .mode_filter = ATA_OP_NULL, /* will be removed soon */
};
static struct ata_port_operations mv_iie_ops = {
--
1.6.4.2
next prev parent reply other threads:[~2010-05-10 19:42 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-10 19:41 [PATCHSET #upstream] libata: separate out SFF and BMDMA, take#2 Tejun Heo
2010-05-10 19:41 ` [PATCH 01/23] pata_sch: use ata_pci_sff_init_one() Tejun Heo
2010-05-15 2:39 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 02/23] sata_inic162x: inic162x is not dependent on CONFIG_ATA_SFF Tejun Heo
2010-05-10 19:41 ` [PATCH 03/23] sata_mv: remove unnecessary initialization Tejun Heo
2010-05-10 19:41 ` [PATCH 04/23] libata-sff: update bmdma host bus error handling Tejun Heo
2010-05-10 19:41 ` [PATCH 05/23] libata-sff: kill unused prototype and make ata_dev_select() static Tejun Heo
2010-05-10 19:41 ` [PATCH 06/23] libata: kill ATA_FLAG_DISABLED Tejun Heo
2010-05-18 2:49 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 07/23] sata_inic162x: kill PORT_PRD_ADDR initialization Tejun Heo
2010-05-10 19:41 ` [PATCH 08/23] libata-sff: reorder SFF/BMDMA functions Tejun Heo
2010-05-10 19:41 ` Tejun Heo [this message]
2010-05-18 2:52 ` [PATCH 09/23] libata-sff: clean up inheritance in several drivers Jeff Garzik
2010-05-18 8:36 ` Tejun Heo
2010-05-19 17:07 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 10/23] libata-sff: clean up BMDMA initialization Tejun Heo
2010-05-18 2:56 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 11/23] libata-sff: introduce ata_sff_init/exit() and ata_sff_port_init() Tejun Heo
2010-05-18 3:00 ` Jeff Garzik
2010-05-19 17:37 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 12/23] libata-sff: rename ap->ops->drain_fifo() to sff_drain_fifo() Tejun Heo
2010-05-18 3:04 ` Jeff Garzik
2010-05-18 8:40 ` Tejun Heo
2010-05-10 19:41 ` [PATCH 13/23] libata-sff: ap->[last_]ctl are SFF specific Tejun Heo
2010-05-10 19:41 ` [PATCH 14/23] libata-sff: port_task is " Tejun Heo
2010-05-10 19:41 ` [PATCH 15/23] libata-sff: separate out BMDMA EH Tejun Heo
2010-05-10 19:41 ` [PATCH 16/23] libata-sff: ata_sff_[dumb_]qc_prep are BMDMA specific Tejun Heo
2010-05-18 3:05 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 17/23] libata-sff: prd is " Tejun Heo
2010-05-18 3:06 ` Jeff Garzik
2010-05-18 8:38 ` Tejun Heo
2010-05-19 17:39 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 18/23] libata-sff: separate out BMDMA qc_issue Tejun Heo
2010-05-10 19:41 ` [PATCH 19/23] libata-sff: ata_sff_irq_clear() is BMDMA specific Tejun Heo
2010-05-19 17:40 ` Jeff Garzik
2010-05-10 19:41 ` [PATCH 20/23] libata-sff: separate out BMDMA irq handler Tejun Heo
2010-05-10 19:41 ` [PATCH 21/23] libata-sff: separate out BMDMA init Tejun Heo
2010-05-10 19:41 ` [PATCH 22/23] libata-sff: kill dummy BMDMA ops from sata_qstor and pata_octeon_cf Tejun Heo
2010-05-10 19:41 ` [PATCH 23/23] libata-sff: make BMDMA optional Tejun Heo
2010-05-18 3:10 ` Jeff Garzik
2010-05-10 20:22 ` [PATCHSET #upstream] libata: separate out SFF and BMDMA, take#2 Jeff Garzik
2010-05-10 20:38 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1273520507-32459-10-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=sshtylyov@mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.