[PATCH 16/23] libata-sff: ata_sff_[dumb_]qc_prep are BMDMA specific

[Tejun Heo <tj@kernel.org>]

Both qc_prep functions deal only with BMDMA PRD setup and PIO only SFF
drivers don't need them.  Rename to ata_bmdma_[dumb_]qc_prep() and
relocate.

All usages are renamed except for pdc_adma and sata_qstor.  Those two
drivers are not BMDMA drivers and don't need to call BMDMA qc_prep
functions.  Calls to ata_sff_qc_prep() in the two drivers are removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/ata/libata-sff.c  |  290 +++++++++++++++++++++++----------------------
 drivers/ata/pata_atiixp.c |    2 +-
 drivers/ata/pata_cs5520.c |    2 +-
 drivers/ata/pata_cs5530.c |    2 +-
 drivers/ata/pata_sc1200.c |    2 +-
 drivers/ata/pdc_adma.c    |    4 +-
 drivers/ata/sata_nv.c     |    4 +-
 drivers/ata/sata_qstor.c  |    4 +-
 include/linux/libata.h    |    4 +-
 9 files changed, 156 insertions(+), 158 deletions(-)

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 4f12b2f..3dba070 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -45,7 +45,7 @@ static struct workqueue_struct *ata_sff_wq;
 const struct ata_port_operations ata_sff_port_ops = {
 	.inherits		= &ata_base_port_ops,
 
-	.qc_prep		= ata_sff_qc_prep,
+	.qc_prep		= ata_noop_qc_prep,
 	.qc_issue		= ata_sff_qc_issue,
 	.qc_fill_rtf		= ata_sff_qc_fill_rtf,
 
@@ -72,149 +72,6 @@ const struct ata_port_operations ata_sff_port_ops = {
 EXPORT_SYMBOL_GPL(ata_sff_port_ops);
 
 /**
- *	ata_fill_sg - Fill PCI IDE PRD table
- *	@qc: Metadata associated with taskfile to be transferred
- *
- *	Fill PCI IDE PRD (scatter-gather) table with segments
- *	associated with the current disk command.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- */
-static void ata_fill_sg(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct scatterlist *sg;
-	unsigned int si, pi;
-
-	pi = 0;
-	for_each_sg(qc->sg, sg, qc->n_elem, si) {
-		u32 addr, offset;
-		u32 sg_len, len;
-
-		/* determine if physical DMA addr spans 64K boundary.
-		 * Note h/w doesn't support 64-bit, so we unconditionally
-		 * truncate dma_addr_t to u32.
-		 */
-		addr = (u32) sg_dma_address(sg);
-		sg_len = sg_dma_len(sg);
-
-		while (sg_len) {
-			offset = addr & 0xffff;
-			len = sg_len;
-			if ((offset + sg_len) > 0x10000)
-				len = 0x10000 - offset;
-
-			ap->prd[pi].addr = cpu_to_le32(addr);
-			ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff);
-			VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
-
-			pi++;
-			sg_len -= len;
-			addr += len;
-		}
-	}
-
-	ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
-}
-
-/**
- *	ata_fill_sg_dumb - Fill PCI IDE PRD table
- *	@qc: Metadata associated with taskfile to be transferred
- *
- *	Fill PCI IDE PRD (scatter-gather) table with segments
- *	associated with the current disk command. Perform the fill
- *	so that we avoid writing any length 64K records for
- *	controllers that don't follow the spec.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- */
-static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct scatterlist *sg;
-	unsigned int si, pi;
-
-	pi = 0;
-	for_each_sg(qc->sg, sg, qc->n_elem, si) {
-		u32 addr, offset;
-		u32 sg_len, len, blen;
-
-		/* determine if physical DMA addr spans 64K boundary.
-		 * Note h/w doesn't support 64-bit, so we unconditionally
-		 * truncate dma_addr_t to u32.
-		 */
-		addr = (u32) sg_dma_address(sg);
-		sg_len = sg_dma_len(sg);
-
-		while (sg_len) {
-			offset = addr & 0xffff;
-			len = sg_len;
-			if ((offset + sg_len) > 0x10000)
-				len = 0x10000 - offset;
-
-			blen = len & 0xffff;
-			ap->prd[pi].addr = cpu_to_le32(addr);
-			if (blen == 0) {
-				/* Some PATA chipsets like the CS5530 can't
-				   cope with 0x0000 meaning 64K as the spec
-				   says */
-				ap->prd[pi].flags_len = cpu_to_le32(0x8000);
-				blen = 0x8000;
-				ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000);
-			}
-			ap->prd[pi].flags_len = cpu_to_le32(blen);
-			VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
-
-			pi++;
-			sg_len -= len;
-			addr += len;
-		}
-	}
-
-	ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
-}
-
-/**
- *	ata_sff_qc_prep - Prepare taskfile for submission
- *	@qc: Metadata associated with taskfile to be prepared
- *
- *	Prepare ATA taskfile for submission.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-void ata_sff_qc_prep(struct ata_queued_cmd *qc)
-{
-	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
-		return;
-
-	ata_fill_sg(qc);
-}
-EXPORT_SYMBOL_GPL(ata_sff_qc_prep);
-
-/**
- *	ata_sff_dumb_qc_prep - Prepare taskfile for submission
- *	@qc: Metadata associated with taskfile to be prepared
- *
- *	Prepare ATA taskfile for submission.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc)
-{
-	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
-		return;
-
-	ata_fill_sg_dumb(qc);
-}
-EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
-
-/**
  *	ata_sff_check_status - Read device status reg & clear interrupt
  *	@ap: port where the device is
  *
@@ -2740,6 +2597,8 @@ const struct ata_port_operations ata_bmdma_port_ops = {
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
+	.qc_prep		= ata_bmdma_qc_prep,
+
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
 	.bmdma_stop		= ata_bmdma_stop,
@@ -2758,6 +2617,149 @@ const struct ata_port_operations ata_bmdma32_port_ops = {
 EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
 
 /**
+ *	ata_bmdma_fill_sg - Fill PCI IDE PRD table
+ *	@qc: Metadata associated with taskfile to be transferred
+ *
+ *	Fill PCI IDE PRD (scatter-gather) table with segments
+ *	associated with the current disk command.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ */
+static void ata_bmdma_fill_sg(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct scatterlist *sg;
+	unsigned int si, pi;
+
+	pi = 0;
+	for_each_sg(qc->sg, sg, qc->n_elem, si) {
+		u32 addr, offset;
+		u32 sg_len, len;
+
+		/* determine if physical DMA addr spans 64K boundary.
+		 * Note h/w doesn't support 64-bit, so we unconditionally
+		 * truncate dma_addr_t to u32.
+		 */
+		addr = (u32) sg_dma_address(sg);
+		sg_len = sg_dma_len(sg);
+
+		while (sg_len) {
+			offset = addr & 0xffff;
+			len = sg_len;
+			if ((offset + sg_len) > 0x10000)
+				len = 0x10000 - offset;
+
+			ap->prd[pi].addr = cpu_to_le32(addr);
+			ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff);
+			VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
+
+			pi++;
+			sg_len -= len;
+			addr += len;
+		}
+	}
+
+	ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+}
+
+/**
+ *	ata_bmdma_fill_sg_dumb - Fill PCI IDE PRD table
+ *	@qc: Metadata associated with taskfile to be transferred
+ *
+ *	Fill PCI IDE PRD (scatter-gather) table with segments
+ *	associated with the current disk command. Perform the fill
+ *	so that we avoid writing any length 64K records for
+ *	controllers that don't follow the spec.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ */
+static void ata_bmdma_fill_sg_dumb(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct scatterlist *sg;
+	unsigned int si, pi;
+
+	pi = 0;
+	for_each_sg(qc->sg, sg, qc->n_elem, si) {
+		u32 addr, offset;
+		u32 sg_len, len, blen;
+
+		/* determine if physical DMA addr spans 64K boundary.
+		 * Note h/w doesn't support 64-bit, so we unconditionally
+		 * truncate dma_addr_t to u32.
+		 */
+		addr = (u32) sg_dma_address(sg);
+		sg_len = sg_dma_len(sg);
+
+		while (sg_len) {
+			offset = addr & 0xffff;
+			len = sg_len;
+			if ((offset + sg_len) > 0x10000)
+				len = 0x10000 - offset;
+
+			blen = len & 0xffff;
+			ap->prd[pi].addr = cpu_to_le32(addr);
+			if (blen == 0) {
+				/* Some PATA chipsets like the CS5530 can't
+				   cope with 0x0000 meaning 64K as the spec
+				   says */
+				ap->prd[pi].flags_len = cpu_to_le32(0x8000);
+				blen = 0x8000;
+				ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000);
+			}
+			ap->prd[pi].flags_len = cpu_to_le32(blen);
+			VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
+
+			pi++;
+			sg_len -= len;
+			addr += len;
+		}
+	}
+
+	ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+}
+
+/**
+ *	ata_bmdma_qc_prep - Prepare taskfile for submission
+ *	@qc: Metadata associated with taskfile to be prepared
+ *
+ *	Prepare ATA taskfile for submission.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_qc_prep(struct ata_queued_cmd *qc)
+{
+	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+		return;
+
+	ata_bmdma_fill_sg(qc);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_qc_prep);
+
+/**
+ *	ata_bmdma_dumb_qc_prep - Prepare taskfile for submission
+ *	@qc: Metadata associated with taskfile to be prepared
+ *
+ *	Prepare ATA taskfile for submission.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc)
+{
+	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+		return;
+
+	ata_bmdma_fill_sg_dumb(qc);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_dumb_qc_prep);
+
+/**
  *	ata_bmdma_error_handler - Stock error handler for BMDMA controller
  *	@ap: port to handle error for
  *
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index cbaf2ed..44d88b3 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -217,7 +217,7 @@ static struct scsi_host_template atiixp_sht = {
 static struct ata_port_operations atiixp_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 
-	.qc_prep 	= ata_sff_dumb_qc_prep,
+	.qc_prep 	= ata_bmdma_dumb_qc_prep,
 	.bmdma_start 	= atiixp_bmdma_start,
 	.bmdma_stop	= atiixp_bmdma_stop,
 
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 95ebdac..17c5f34 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -110,7 +110,7 @@ static struct scsi_host_template cs5520_sht = {
 
 static struct ata_port_operations cs5520_port_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.qc_prep		= ata_sff_dumb_qc_prep,
+	.qc_prep		= ata_bmdma_dumb_qc_prep,
 	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= cs5520_set_piomode,
 };
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 738ad2e..4b9a66f 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -167,7 +167,7 @@ static struct scsi_host_template cs5530_sht = {
 static struct ata_port_operations cs5530_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 
-	.qc_prep 	= ata_sff_dumb_qc_prep,
+	.qc_prep 	= ata_bmdma_dumb_qc_prep,
 	.qc_issue	= cs5530_qc_issue,
 
 	.cable_detect	= ata_cable_40wire,
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index dfecc6f..599e648 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -209,7 +209,7 @@ static struct scsi_host_template sc1200_sht = {
 
 static struct ata_port_operations sc1200_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
-	.qc_prep 	= ata_sff_dumb_qc_prep,
+	.qc_prep 	= ata_bmdma_dumb_qc_prep,
 	.qc_issue	= sc1200_qc_issue,
 	.qc_defer	= sc1200_qc_defer,
 	.cable_detect	= ata_cable_40wire,
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index bb4f838..adbe042 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -324,10 +324,8 @@ static void adma_qc_prep(struct ata_queued_cmd *qc)
 	VPRINTK("ENTER\n");
 
 	adma_enter_reg_mode(qc->ap);
-	if (qc->tf.protocol != ATA_PROT_DMA) {
-		ata_sff_qc_prep(qc);
+	if (qc->tf.protocol != ATA_PROT_DMA)
 		return;
-	}
 
 	buf[i++] = 0;	/* Response flags */
 	buf[i++] = 0;	/* reserved */
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index e6fd73e..71168e8 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1409,7 +1409,7 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
 		BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
 			(qc->flags & ATA_QCFLAG_DMAMAP));
 		nv_adma_register_mode(qc->ap);
-		ata_sff_qc_prep(qc);
+		ata_bmdma_qc_prep(qc);
 		return;
 	}
 
@@ -2012,7 +2012,7 @@ static int nv_swncq_port_start(struct ata_port *ap)
 static void nv_swncq_qc_prep(struct ata_queued_cmd *qc)
 {
 	if (qc->tf.protocol != ATA_PROT_NCQ) {
-		ata_sff_qc_prep(qc);
+		ata_bmdma_qc_prep(qc);
 		return;
 	}
 
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index d3a22f2..d533b3d 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -303,10 +303,8 @@ static void qs_qc_prep(struct ata_queued_cmd *qc)
 	VPRINTK("ENTER\n");
 
 	qs_enter_reg_mode(qc->ap);
-	if (qc->tf.protocol != ATA_PROT_DMA) {
-		ata_sff_qc_prep(qc);
+	if (qc->tf.protocol != ATA_PROT_DMA)
 		return;
-	}
 
 	nelem = qs_fill_sg(qc);
 
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 7b96c2d..61ff9a1 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1569,8 +1569,6 @@ extern const struct ata_port_operations ata_bmdma32_port_ops;
 	.sg_tablesize		= LIBATA_MAX_PRD,		\
 	.dma_boundary		= ATA_DMA_BOUNDARY
 
-extern void ata_sff_qc_prep(struct ata_queued_cmd *qc);
-extern void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc);
 extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
 extern u8 ata_sff_check_status(struct ata_port *ap);
 extern void ata_sff_pause(struct ata_port *ap);
@@ -1627,6 +1625,8 @@ extern int ata_pci_sff_init_one(struct pci_dev *pdev,
 		struct scsi_host_template *sht, void *host_priv, int hflags);
 #endif /* CONFIG_PCI */
 
+extern void ata_bmdma_qc_prep(struct ata_queued_cmd *qc);
+extern void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc);
 extern void ata_bmdma_error_handler(struct ata_port *ap);
 extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc);
 extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
-- 
1.6.4.2