From: Ben Dooks <ben-linux@fluff.org>
To: linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org
Cc: Ben Dooks <ben-linux@fluff.org>
Subject: [PATCH 15/15] ARM: SAMSUNG: Update S3C2416 entry with S3C2450
Date: Wed, 12 May 2010 03:36:06 +0100 [thread overview]
Message-ID: <1273631766-15693-15-git-send-email-ben-linux@fluff.org> (raw)
In-Reply-To: <1273631766-15693-1-git-send-email-ben-linux@fluff.org>
These devices are so similar that they share the same SoC
ID code, so note this.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/Kconfig | 6 +++++-
arch/arm/mach-s3c2416/Kconfig | 3 +++
arch/arm/plat-s3c24xx/cpu.c | 2 +-
3 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6785c33..3f8718f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -647,7 +647,7 @@ config ARCH_SA1100
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
- bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443"
+ bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
select HAVE_CLK
@@ -656,6 +656,10 @@ config ARCH_S3C2410
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derivatives).
+ Note, the S3C2416 and the S3C2450 are so close that they even share
+ the same SoC ID code. This means that there is no seperate machine
+ directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
+
config ARCH_S3C64XX
bool "Samsung S3C64XX"
select PLAT_SAMSUNG
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 6d077b2..29103a6 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -4,6 +4,9 @@
#
# Licensed under GPLv2
+# note, this also supports the S3C2450 which is so similar it has the same
+# ID code as the S3C2416.
+
config CPU_S3C2416
bool
depends on ARCH_S3C2410
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 32db856..76d0858 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -58,7 +58,7 @@
static const char name_s3c2400[] = "S3C2400";
static const char name_s3c2410[] = "S3C2410";
static const char name_s3c2412[] = "S3C2412";
-static const char name_s3c2416[] = "S3C2416";
+static const char name_s3c2416[] = "S3C2416/S3C2450";
static const char name_s3c2440[] = "S3C2440";
static const char name_s3c2442[] = "S3C2442";
static const char name_s3c2442b[] = "S3C2442B";
--
1.6.3.3
WARNING: multiple messages have this Message-ID (diff)
From: ben-linux@fluff.org (Ben Dooks)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 15/15] ARM: SAMSUNG: Update S3C2416 entry with S3C2450
Date: Wed, 12 May 2010 03:36:06 +0100 [thread overview]
Message-ID: <1273631766-15693-15-git-send-email-ben-linux@fluff.org> (raw)
In-Reply-To: <1273631766-15693-1-git-send-email-ben-linux@fluff.org>
These devices are so similar that they share the same SoC
ID code, so note this.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/Kconfig | 6 +++++-
arch/arm/mach-s3c2416/Kconfig | 3 +++
arch/arm/plat-s3c24xx/cpu.c | 2 +-
3 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6785c33..3f8718f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -647,7 +647,7 @@ config ARCH_SA1100
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
- bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443"
+ bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
select HAVE_CLK
@@ -656,6 +656,10 @@ config ARCH_S3C2410
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derivatives).
+ Note, the S3C2416 and the S3C2450 are so close that they even share
+ the same SoC ID code. This means that there is no seperate machine
+ directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
+
config ARCH_S3C64XX
bool "Samsung S3C64XX"
select PLAT_SAMSUNG
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 6d077b2..29103a6 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -4,6 +4,9 @@
#
# Licensed under GPLv2
+# note, this also supports the S3C2450 which is so similar it has the same
+# ID code as the S3C2416.
+
config CPU_S3C2416
bool
depends on ARCH_S3C2410
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 32db856..76d0858 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -58,7 +58,7 @@
static const char name_s3c2400[] = "S3C2400";
static const char name_s3c2410[] = "S3C2410";
static const char name_s3c2412[] = "S3C2412";
-static const char name_s3c2416[] = "S3C2416";
+static const char name_s3c2416[] = "S3C2416/S3C2450";
static const char name_s3c2440[] = "S3C2440";
static const char name_s3c2442[] = "S3C2442";
static const char name_s3c2442b[] = "S3C2442B";
--
1.6.3.3
next prev parent reply other threads:[~2010-05-12 2:36 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-12 2:35 [PATCH 01/15] ARM: S3C: Add S3C2416 detection to uncompress code Ben Dooks
2010-05-12 2:35 ` Ben Dooks
2010-05-12 2:35 ` [PATCH 02/15] serial: Use s3c2440 driver for S3C2416 SoC Ben Dooks
2010-05-12 2:35 ` Ben Dooks
2010-05-12 2:35 ` [PATCH 03/15] ARM: S3C2416: Add S3C2416-specific registers definitions Ben Dooks
2010-05-12 2:35 ` Ben Dooks
2010-05-12 2:35 ` [PATCH 04/15] ARM: SAMSUNG: Move S3C6400 PLL code to <plat/pll.h> for re-use Ben Dooks
2010-05-12 2:35 ` Ben Dooks
2010-05-12 2:35 ` [PATCH 05/15] ARM: SAMSUNG: Add s3c_disable_clocks() and tidy init+disable usage Ben Dooks
2010-05-12 2:35 ` Ben Dooks
2010-05-12 2:35 ` [PATCH 06/15] ARM: S3C2416: Add arch support Ben Dooks
2010-05-12 2:35 ` Ben Dooks
2010-05-12 2:35 ` [PATCH 07/15] ARM: S3C2416: Add initial support of SMDK2416 Ben Dooks
2010-05-12 2:35 ` Ben Dooks
2010-05-12 2:35 ` [PATCH 08/15] ARM: S3C24XX: Identify S3C2416 if S3C2412/S3C2413 built in Ben Dooks
2010-05-12 2:35 ` Ben Dooks
2010-05-12 2:36 ` [PATCH 09/15] ARM: S3C2443: Move parts of the clock code to common clock file Ben Dooks
2010-05-12 2:36 ` Ben Dooks
2010-05-12 2:36 ` [PATCH 10/15] ARM: S3C2416: Add basic clock support Ben Dooks
2010-05-12 2:36 ` Ben Dooks
2010-05-12 2:36 ` [PATCH 11/15] ARM: S3C2416: Add support for second HSMMC channel Ben Dooks
2010-05-12 2:36 ` Ben Dooks
2010-06-17 19:05 ` Darius Augulis
2010-06-17 19:05 ` Darius Augulis
2010-06-17 19:19 ` Yauhen Kharuzhy
2010-06-17 19:19 ` Yauhen Kharuzhy
2010-06-18 18:30 ` Darius Augulis
2010-06-18 18:30 ` Darius Augulis
2010-05-12 2:36 ` [PATCH 12/15] ARM: S3C2416: Add support for OHCI on SMDK2416 Ben Dooks
2010-05-12 2:36 ` Ben Dooks
2010-05-12 2:36 ` [PATCH 13/15] ARM: S3C2416: Use s3c2440 style i2c controller Ben Dooks
2010-05-12 2:36 ` Ben Dooks
2010-05-12 2:36 ` [PATCH 14/15] ARM: S3C2413: Update GPIO pull-up support Ben Dooks
2010-05-12 2:36 ` Ben Dooks
2010-05-12 2:36 ` Ben Dooks [this message]
2010-05-12 2:36 ` [PATCH 15/15] ARM: SAMSUNG: Update S3C2416 entry with S3C2450 Ben Dooks
2010-05-12 2:38 ` [PATCH 01/15] ARM: S3C: Add S3C2416 detection to uncompress code Ben Dooks
2010-05-12 2:38 ` Ben Dooks
2010-05-12 7:25 ` Yauhen Kharuzhy
2010-05-12 7:25 ` Yauhen Kharuzhy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1273631766-15693-15-git-send-email-ben-linux@fluff.org \
--to=ben-linux@fluff.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.