All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Eric Bénard" <eric@eukrea.com>
To: linux-input@vger.kernel.org
Cc: dmitry.torokhov@gmail.com, maramaopercheseimorto@gmail.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] imx_keypad: add PM support
Date: Sun, 30 May 2010 10:51:06 +0200	[thread overview]
Message-ID: <1275209466-3899-1-git-send-email-eric@eukrea.com> (raw)
In-Reply-To: <1275135823.3128.15.camel@realization>

* add suspend/resume support
* use keypad_data to enable wakeup from platform data
* suspend/resume tested when keypad is not in use and when it's
is use (in which case we immediatly get the key pressed for
wakeup)

Signed-off-by: Eric Bénard <eric@eukrea.com>
---
 drivers/input/keyboard/imx_keypad.c |   56 +++++++++++++++++++++++++++++++++-
 1 files changed, 54 insertions(+), 2 deletions(-)

diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index d92c15c..b303cc9 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -364,6 +364,55 @@ static void imx_keypad_inhibit(struct imx_keypad *keypad)
 	writew(0xff00, keypad->mmio_base + KPCR);
 }
 
+static int mxc_kpp_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct imx_keypad *keypad = platform_get_drvdata(pdev);
+	unsigned short reg_val;
+
+	clk_disable(keypad->clk);
+
+	if (device_may_wakeup(&pdev->dev)) {
+		reg_val = readw(keypad->mmio_base + KPSR);
+		if ((reg_val & KBD_STAT_KDIE) == 0) {
+			/* If no depress interrupt enable the release interrupt */
+			reg_val |= KBD_STAT_KRIE;
+			writew(reg_val, keypad->mmio_base + KPSR);
+		}
+		enable_irq_wake(keypad->irq);
+	} else {
+		keypad->enabled = false;
+		synchronize_irq(keypad->irq);
+		disable_irq(keypad->irq);
+	}
+
+	return 0;
+}
+
+/*!
+ * This function brings the Keypad controller back from low-power state.
+ * If Keypad is enabled as a wake source(i.e. it can resume the system
+ * from suspend mode), the Keypad controller doesn't enter low-power state.
+ *
+ * @param   pdev  the device structure used to give information on Keypad
+ *                to resume
+ *
+ * @return  The function always returns 0.
+ */
+static int mxc_kpp_resume(struct platform_device *pdev)
+{
+	struct imx_keypad *keypad = platform_get_drvdata(pdev);
+
+	clk_enable(keypad->clk);
+	if (device_may_wakeup(&pdev->dev)) {
+		/* The irq routine already cleared KRIE if it was set */
+	} else {
+		keypad->enabled = true;
+		enable_irq(keypad->irq);
+	}
+
+	return 0;
+}
+
 static void imx_keypad_close(struct input_dev *dev)
 {
 	struct imx_keypad *keypad = input_get_drvdata(dev);
@@ -410,7 +459,8 @@ open_err:
 
 static int __devinit imx_keypad_probe(struct platform_device *pdev)
 {
-	const struct matrix_keymap_data *keymap_data = pdev->dev.platform_data;
+	const struct matrix_keypad_platform_data *keypad_data = pdev->dev.platform_data;
+	const struct matrix_keymap_data *keymap_data = keypad_data->keymap_data;
 	struct imx_keypad *keypad;
 	struct input_dev *input_dev;
 	struct resource *res;
@@ -525,7 +575,7 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, keypad);
-	device_init_wakeup(&pdev->dev, 1);
+	device_init_wakeup(&pdev->dev, keypad_data->wakeup);
 
 	return 0;
 
@@ -574,6 +624,8 @@ static struct platform_driver imx_keypad_driver = {
 	},
 	.probe		= imx_keypad_probe,
 	.remove		= __devexit_p(imx_keypad_remove),
+	.suspend = mxc_kpp_suspend,
+	.resume = mxc_kpp_resume,
 };
 
 static int __init imx_keypad_init(void)
-- 
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: eric@eukrea.com (Eric Bénard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] imx_keypad: add PM support
Date: Sun, 30 May 2010 10:51:06 +0200	[thread overview]
Message-ID: <1275209466-3899-1-git-send-email-eric@eukrea.com> (raw)
In-Reply-To: <1275135823.3128.15.camel@realization>

* add suspend/resume support
* use keypad_data to enable wakeup from platform data
* suspend/resume tested when keypad is not in use and when it's
is use (in which case we immediatly get the key pressed for
wakeup)

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
 drivers/input/keyboard/imx_keypad.c |   56 +++++++++++++++++++++++++++++++++-
 1 files changed, 54 insertions(+), 2 deletions(-)

diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index d92c15c..b303cc9 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -364,6 +364,55 @@ static void imx_keypad_inhibit(struct imx_keypad *keypad)
 	writew(0xff00, keypad->mmio_base + KPCR);
 }
 
+static int mxc_kpp_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct imx_keypad *keypad = platform_get_drvdata(pdev);
+	unsigned short reg_val;
+
+	clk_disable(keypad->clk);
+
+	if (device_may_wakeup(&pdev->dev)) {
+		reg_val = readw(keypad->mmio_base + KPSR);
+		if ((reg_val & KBD_STAT_KDIE) == 0) {
+			/* If no depress interrupt enable the release interrupt */
+			reg_val |= KBD_STAT_KRIE;
+			writew(reg_val, keypad->mmio_base + KPSR);
+		}
+		enable_irq_wake(keypad->irq);
+	} else {
+		keypad->enabled = false;
+		synchronize_irq(keypad->irq);
+		disable_irq(keypad->irq);
+	}
+
+	return 0;
+}
+
+/*!
+ * This function brings the Keypad controller back from low-power state.
+ * If Keypad is enabled as a wake source(i.e. it can resume the system
+ * from suspend mode), the Keypad controller doesn't enter low-power state.
+ *
+ * @param   pdev  the device structure used to give information on Keypad
+ *                to resume
+ *
+ * @return  The function always returns 0.
+ */
+static int mxc_kpp_resume(struct platform_device *pdev)
+{
+	struct imx_keypad *keypad = platform_get_drvdata(pdev);
+
+	clk_enable(keypad->clk);
+	if (device_may_wakeup(&pdev->dev)) {
+		/* The irq routine already cleared KRIE if it was set */
+	} else {
+		keypad->enabled = true;
+		enable_irq(keypad->irq);
+	}
+
+	return 0;
+}
+
 static void imx_keypad_close(struct input_dev *dev)
 {
 	struct imx_keypad *keypad = input_get_drvdata(dev);
@@ -410,7 +459,8 @@ open_err:
 
 static int __devinit imx_keypad_probe(struct platform_device *pdev)
 {
-	const struct matrix_keymap_data *keymap_data = pdev->dev.platform_data;
+	const struct matrix_keypad_platform_data *keypad_data = pdev->dev.platform_data;
+	const struct matrix_keymap_data *keymap_data = keypad_data->keymap_data;
 	struct imx_keypad *keypad;
 	struct input_dev *input_dev;
 	struct resource *res;
@@ -525,7 +575,7 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, keypad);
-	device_init_wakeup(&pdev->dev, 1);
+	device_init_wakeup(&pdev->dev, keypad_data->wakeup);
 
 	return 0;
 
@@ -574,6 +624,8 @@ static struct platform_driver imx_keypad_driver = {
 	},
 	.probe		= imx_keypad_probe,
 	.remove		= __devexit_p(imx_keypad_remove),
+	.suspend = mxc_kpp_suspend,
+	.resume = mxc_kpp_resume,
 };
 
 static int __init imx_keypad_init(void)
-- 
1.6.3.3

  reply	other threads:[~2010-05-30  8:51 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-27  6:33 [PATCH v2 1/8] i.MX27: add suspend to RAM support Eric Bénard
2010-05-27  6:33 ` [PATCH v2 2/8] mxc_nand: fix PM Eric Bénard
2010-05-27  6:33   ` [PATCH v2 3/8] imx_keypad: add PM support Eric Bénard
2010-05-27  6:33     ` [PATCH v2 4/8] eukrea_mbimx27: update keyboard platform data Eric Bénard
2010-05-27  6:33       ` [PATCH v2 5/8] serial/imx.c: fix suspend/resume Eric Bénard
2010-05-27  6:33         ` [PATCH v2 6/8] serial/imx: drvdata is sport and not &sport->port Eric Bénard
2010-05-27  6:33           ` [PATCH v2 7/8] net/fec: fix pm to survive to suspend/resume Eric Bénard
2010-05-27  6:33             ` [PATCH v2 8/8] imxfb: fix PM Eric Bénard
2010-05-27 10:37             ` [PATCH v2 7/8] net/fec: fix pm to survive to suspend/resume Sergei Shtylyov
2010-05-27 14:19               ` [PATCH v3] " Eric Bénard
2010-05-27 17:09                 ` Fabio Estevam
2010-05-27 17:53                   ` [PATCH] " Eric Bénard
2010-05-27 17:53                     ` Eric Bénard
2010-05-29  7:15                     ` David Miller
2010-05-29  7:15                       ` David Miller
2010-05-29 20:04                       ` [PATCH v2] " Eric Bénard
2010-05-29 20:04                         ` Eric Bénard
2010-06-02 13:13                         ` David Miller
2010-06-02 13:13                           ` David Miller
2010-05-29 12:23     ` [PATCH v2 3/8] imx_keypad: add PM support Alberto Panizzo
2010-05-30  8:51       ` Eric Bénard [this message]
2010-05-30  8:51         ` [PATCH] " Eric Bénard
2010-06-02  8:02         ` Dmitry Torokhov
2010-06-02  8:02           ` Dmitry Torokhov
2010-05-27 17:55   ` [PATCH] mxc_nand: fix PM Eric Bénard
2010-05-27 17:55     ` Eric Bénard
2010-06-14  7:07     ` Eric Bénard
2010-06-14  7:07       ` Eric Bénard
2010-06-29  6:41       ` Artem Bityutskiy
2010-06-29  6:41         ` Artem Bityutskiy
2010-07-01  3:47       ` Artem Bityutskiy
2010-07-01  3:47         ` Artem Bityutskiy
2010-06-14  8:43     ` Uwe Kleine-König
2010-06-14  8:43       ` Uwe Kleine-König
2010-05-27 14:13 ` [PATCH v3] i.MX27: add suspend to RAM support Eric Bénard
2010-05-27 19:43   ` Russell King - ARM Linux
2010-05-27 20:06     ` Eric Bénard
2010-05-27 20:16       ` Russell King - ARM Linux
2010-05-27 20:48         ` [PATCH v4] " Eric Bénard
2010-05-27 20:54         ` [PATCH v3] " Eric Bénard
2010-05-27 21:46           ` Russell King - ARM Linux
2010-06-01 19:57             ` [PATCH v5] " Eric Bénard
2010-06-03  8:28               ` Sascha Hauer
2010-05-27 21:13         ` [PATCH v3] " Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1275209466-3899-1-git-send-email-eric@eukrea.com \
    --to=eric@eukrea.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-input@vger.kernel.org \
    --cc=maramaopercheseimorto@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.