All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 05/14] block: Add bdrv_(p)write_sync
Date: Tue, 22 Jun 2010 16:09:24 +0200	[thread overview]
Message-ID: <1277215773-27357-6-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1277215773-27357-1-git-send-email-kwolf@redhat.com>

Add new functions that write and flush the written data to disk immediately.
This is what needs to be used for image format metadata to maintain integrity
for cache=... modes that don't use O_DSYNC. (Actually, we only need barriers,
and therefore the functions are defined as such, but flushes is what is
implemented in this patch - we can try to change that later)

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block.c |   37 +++++++++++++++++++++++++++++++++++++
 block.h |    4 ++++
 2 files changed, 41 insertions(+), 0 deletions(-)

diff --git a/block.c b/block.c
index 3fc2969..e71a771 100644
--- a/block.c
+++ b/block.c
@@ -1010,6 +1010,43 @@ int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
     return count1;
 }
 
+/*
+ * Writes to the file and ensures that no writes are reordered across this
+ * request (acts as a barrier)
+ *
+ * Returns 0 on success, -errno in error cases.
+ */
+int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
+    const void *buf, int count)
+{
+    int ret;
+
+    ret = bdrv_pwrite(bs, offset, buf, count);
+    if (ret < 0) {
+        return ret;
+    }
+
+    /* No flush needed for cache=writethrough, it uses O_DSYNC */
+    if ((bs->open_flags & BDRV_O_CACHE_MASK) != 0) {
+        bdrv_flush(bs);
+    }
+
+    return 0;
+}
+
+/*
+ * Writes to the file and ensures that no writes are reordered across this
+ * request (acts as a barrier)
+ *
+ * Returns 0 on success, -errno in error cases.
+ */
+int bdrv_write_sync(BlockDriverState *bs, int64_t sector_num,
+    const uint8_t *buf, int nb_sectors)
+{
+    return bdrv_pwrite_sync(bs, BDRV_SECTOR_SIZE * sector_num,
+        buf, BDRV_SECTOR_SIZE * nb_sectors);
+}
+
 /**
  * Truncate file to 'offset' bytes (needed only for file protocols)
  */
diff --git a/block.h b/block.h
index 9df9b38..6a157f4 100644
--- a/block.h
+++ b/block.h
@@ -80,6 +80,10 @@ int bdrv_pread(BlockDriverState *bs, int64_t offset,
                void *buf, int count);
 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
                 const void *buf, int count);
+int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
+    const void *buf, int count);
+int bdrv_write_sync(BlockDriverState *bs, int64_t sector_num,
+    const uint8_t *buf, int nb_sectors);
 int bdrv_truncate(BlockDriverState *bs, int64_t offset);
 int64_t bdrv_getlength(BlockDriverState *bs);
 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr);
-- 
1.6.6.1

  parent reply	other threads:[~2010-06-22 14:09 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-22 14:09 [Qemu-devel] [PULL 00/14] Block patches Kevin Wolf
2010-06-22 14:09 ` [Qemu-devel] [PATCH 01/14] scsi-bus: Add PERSISTENT_RESERVE_OUT SCSIRequest->cmd.mode setup Kevin Wolf
2010-06-22 14:09 ` [Qemu-devel] [PATCH 02/14] scsi-bus: Add MAINTENANCE_IN and MAINTENANCE_OUT SCSIRequest xfer and mode assignments Kevin Wolf
2010-06-22 14:09 ` [Qemu-devel] [PATCH 03/14] block: fix physical_block_size calculation Kevin Wolf
2010-06-22 14:09 ` [Qemu-devel] [PATCH 04/14] monitor: allow device to be ejected if no disk is inserted Kevin Wolf
2010-06-22 14:09 ` Kevin Wolf [this message]
2010-06-22 14:09 ` [Qemu-devel] [PATCH 06/14] cow: Use bdrv_(p)write_sync for metadata writes Kevin Wolf
2010-06-22 14:09 ` [Qemu-devel] [PATCH 07/14] qcow: " Kevin Wolf
2010-06-22 14:09 ` [Qemu-devel] [PATCH 08/14] qcow2: " Kevin Wolf
2010-06-22 14:09 ` [Qemu-devel] [PATCH 09/14] vmdk: " Kevin Wolf
2010-06-22 14:09 ` [Qemu-devel] [PATCH 10/14] vpc: " Kevin Wolf
2010-06-22 14:09 ` [Qemu-devel] [PATCH 11/14] qemu-io: check registered fds in command_loop() Kevin Wolf
2010-06-22 14:09 ` [Qemu-devel] [PATCH 12/14] virtio-blk: fix the list operation in virtio_blk_load() Kevin Wolf
2010-06-22 14:09 ` [Qemu-devel] [PATCH 13/14] qcow2: Fix qemu-img check segfault on corrupted images Kevin Wolf
2010-06-22 14:09 ` [Qemu-devel] [PATCH 14/14] qcow2: Don't try to check tables that couldn't be loaded Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1277215773-27357-6-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=anthony@codemonkey.ws \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.