All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 1/5] msm: fb: initial framebuffer support
@ 2010-07-13 20:03 Daniel Walker
  2010-07-13 20:03 ` [PATCH 2/5] msm: gpio support for trout Daniel Walker
                   ` (4 more replies)
  0 siblings, 5 replies; 6+ messages in thread
From: Daniel Walker @ 2010-07-13 20:03 UTC (permalink / raw)
  To: linux-arm-msm; +Cc: Pavel Machek, David Lanzendörfer, Daniel Walker

Initial framebuffer components. Add board-trout-panel.c
as well as platform parts.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
---
 arch/arm/mach-msm/Makefile            |    1 +
 arch/arm/mach-msm/board-trout-panel.c |  640 +++++++++++++++++++++++++++++++++
 arch/arm/mach-msm/devices-msm7x00.c   |   67 ++++
 arch/arm/mach-msm/devices.h           |    4 +
 4 files changed, 712 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-msm/board-trout-panel.c

diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index df7bf97..cdd1caf 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
 
 obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
+obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c
new file mode 100644
index 0000000..a1cd0c8
--- /dev/null
+++ b/arch/arm/mach-msm/board-trout-panel.c
@@ -0,0 +1,640 @@
+/* linux/arch/arm/mach-msm/board-trout-mddi.c
+** Author: Brian Swetland <swetland@google.com>
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/mach-types.h>
+
+#include <mach/msm_fb.h>
+#include <mach/vreg.h>
+
+#include "board-trout.h"
+#include "proc_comm.h"
+#include "devices.h"
+
+#define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255
+
+static struct clk *gp_clk;
+static int trout_backlight_off;
+static int trout_backlight_brightness = TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS;
+static int trout_new_backlight = 1;
+static uint8_t trout_backlight_last_level = 33;
+static DEFINE_MUTEX(trout_backlight_lock);
+
+static void trout_set_backlight_level(uint8_t level)
+{
+	unsigned percent = ((int)level * 100) / 255;
+
+	if (trout_new_backlight) {
+		unsigned long flags;
+		int i = 0;
+		level = (int)level * 34 / 256;
+
+		if (trout_backlight_last_level == level)
+			return;
+
+		if (level == 0) {
+			gpio_set_value(27, 0);
+			msleep(2);
+		} else {
+			local_irq_save(flags);
+			if (trout_backlight_last_level == 0) {
+				gpio_set_value(27, 1);
+				udelay(40);
+				trout_backlight_last_level = 33;
+			}
+			i = (trout_backlight_last_level - level + 33) % 33;
+			while (i-- > 0) {
+				gpio_set_value(27, 0);
+				udelay(1);
+				gpio_set_value(27, 1);
+				udelay(1);
+			}
+			local_irq_restore(flags);
+		}
+		trout_backlight_last_level = level;
+	}
+	else {
+		if(level) {
+			clk_enable(gp_clk);
+			writel((1U << 16) | (~level & 0xffff),
+			       MSM_CLK_CTL_BASE + 0x58);
+			/* Going directly to a 100% duty cycle does not
+			 *  seem to work */
+			if(level == 255) {
+				writel((~127 << 16) | 0xb20,
+				       MSM_CLK_CTL_BASE + 0x5c);
+				udelay(1);
+			}
+			writel((~127 << 16) | 0xb58, MSM_CLK_CTL_BASE + 0x5c);
+		}
+		else {
+			writel(0x0, MSM_CLK_CTL_BASE + 0x5c);
+			clk_disable(gp_clk);
+		}
+	}
+}
+
+#define MDDI_CLIENT_CORE_BASE  0x108000
+#define LCD_CONTROL_BLOCK_BASE 0x110000
+#define SPI_BLOCK_BASE         0x120000
+#define I2C_BLOCK_BASE         0x130000
+#define PWM_BLOCK_BASE         0x140000
+#define GPIO_BLOCK_BASE        0x150000
+#define SYSTEM_BLOCK1_BASE     0x160000
+#define SYSTEM_BLOCK2_BASE     0x170000
+
+
+#define	DPSUS       (MDDI_CLIENT_CORE_BASE|0x24)
+#define	SYSCLKENA   (MDDI_CLIENT_CORE_BASE|0x2C)
+#define	PWM0OFF	      (PWM_BLOCK_BASE|0x1C)
+
+#define V_VDDE2E_VDD2_GPIO 0
+#define MDDI_RST_N 82
+
+#define	MDDICAP0    (MDDI_CLIENT_CORE_BASE|0x00)
+#define	MDDICAP1    (MDDI_CLIENT_CORE_BASE|0x04)
+#define	MDDICAP2    (MDDI_CLIENT_CORE_BASE|0x08)
+#define	MDDICAP3    (MDDI_CLIENT_CORE_BASE|0x0C)
+#define	MDCAPCHG    (MDDI_CLIENT_CORE_BASE|0x10)
+#define	MDCRCERC    (MDDI_CLIENT_CORE_BASE|0x14)
+#define	TTBUSSEL    (MDDI_CLIENT_CORE_BASE|0x18)
+#define	DPSET0      (MDDI_CLIENT_CORE_BASE|0x1C)
+#define	DPSET1      (MDDI_CLIENT_CORE_BASE|0x20)
+#define	DPSUS       (MDDI_CLIENT_CORE_BASE|0x24)
+#define	DPRUN       (MDDI_CLIENT_CORE_BASE|0x28)
+#define	SYSCKENA    (MDDI_CLIENT_CORE_BASE|0x2C)
+#define	TESTMODE    (MDDI_CLIENT_CORE_BASE|0x30)
+#define	FIFOMONI    (MDDI_CLIENT_CORE_BASE|0x34)
+#define	INTMONI     (MDDI_CLIENT_CORE_BASE|0x38)
+#define	MDIOBIST    (MDDI_CLIENT_CORE_BASE|0x3C)
+#define	MDIOPSET    (MDDI_CLIENT_CORE_BASE|0x40)
+#define	BITMAP0     (MDDI_CLIENT_CORE_BASE|0x44)
+#define	BITMAP1     (MDDI_CLIENT_CORE_BASE|0x48)
+#define	BITMAP2     (MDDI_CLIENT_CORE_BASE|0x4C)
+#define	BITMAP3     (MDDI_CLIENT_CORE_BASE|0x50)
+#define	BITMAP4     (MDDI_CLIENT_CORE_BASE|0x54)
+
+#define	SRST        (LCD_CONTROL_BLOCK_BASE|0x00)
+#define	PORT_ENB    (LCD_CONTROL_BLOCK_BASE|0x04)
+#define	START       (LCD_CONTROL_BLOCK_BASE|0x08)
+#define	PORT        (LCD_CONTROL_BLOCK_BASE|0x0C)
+#define	CMN         (LCD_CONTROL_BLOCK_BASE|0x10)
+#define	GAMMA       (LCD_CONTROL_BLOCK_BASE|0x14)
+#define	INTFLG      (LCD_CONTROL_BLOCK_BASE|0x18)
+#define	INTMSK      (LCD_CONTROL_BLOCK_BASE|0x1C)
+#define	MPLFBUF     (LCD_CONTROL_BLOCK_BASE|0x20)
+#define	HDE_LEFT    (LCD_CONTROL_BLOCK_BASE|0x24)
+#define	VDE_TOP     (LCD_CONTROL_BLOCK_BASE|0x28)
+#define	PXL         (LCD_CONTROL_BLOCK_BASE|0x30)
+#define	HCYCLE      (LCD_CONTROL_BLOCK_BASE|0x34)
+#define	HSW         (LCD_CONTROL_BLOCK_BASE|0x38)
+#define	HDE_START   (LCD_CONTROL_BLOCK_BASE|0x3C)
+#define	HDE_SIZE    (LCD_CONTROL_BLOCK_BASE|0x40)
+#define	VCYCLE      (LCD_CONTROL_BLOCK_BASE|0x44)
+#define	VSW         (LCD_CONTROL_BLOCK_BASE|0x48)
+#define	VDE_START   (LCD_CONTROL_BLOCK_BASE|0x4C)
+#define	VDE_SIZE    (LCD_CONTROL_BLOCK_BASE|0x50)
+#define	WAKEUP      (LCD_CONTROL_BLOCK_BASE|0x54)
+#define	WSYN_DLY    (LCD_CONTROL_BLOCK_BASE|0x58)
+#define	REGENB      (LCD_CONTROL_BLOCK_BASE|0x5C)
+#define	VSYNIF      (LCD_CONTROL_BLOCK_BASE|0x60)
+#define	WRSTB       (LCD_CONTROL_BLOCK_BASE|0x64)
+#define	RDSTB       (LCD_CONTROL_BLOCK_BASE|0x68)
+#define	ASY_DATA    (LCD_CONTROL_BLOCK_BASE|0x6C)
+#define	ASY_DATB    (LCD_CONTROL_BLOCK_BASE|0x70)
+#define	ASY_DATC    (LCD_CONTROL_BLOCK_BASE|0x74)
+#define	ASY_DATD    (LCD_CONTROL_BLOCK_BASE|0x78)
+#define	ASY_DATE    (LCD_CONTROL_BLOCK_BASE|0x7C)
+#define	ASY_DATF    (LCD_CONTROL_BLOCK_BASE|0x80)
+#define	ASY_DATG    (LCD_CONTROL_BLOCK_BASE|0x84)
+#define	ASY_DATH    (LCD_CONTROL_BLOCK_BASE|0x88)
+#define	ASY_CMDSET  (LCD_CONTROL_BLOCK_BASE|0x8C)
+
+#define	SSICTL      (SPI_BLOCK_BASE|0x00)
+#define	SSITIME     (SPI_BLOCK_BASE|0x04)
+#define	SSITX       (SPI_BLOCK_BASE|0x08)
+#define	SSIRX       (SPI_BLOCK_BASE|0x0C)
+#define	SSIINTC     (SPI_BLOCK_BASE|0x10)
+#define	SSIINTS     (SPI_BLOCK_BASE|0x14)
+#define	SSIDBG1     (SPI_BLOCK_BASE|0x18)
+#define	SSIDBG2     (SPI_BLOCK_BASE|0x1C)
+#define	SSIID       (SPI_BLOCK_BASE|0x20)
+
+#define	WKREQ       (SYSTEM_BLOCK1_BASE|0x00)
+#define	CLKENB      (SYSTEM_BLOCK1_BASE|0x04)
+#define	DRAMPWR     (SYSTEM_BLOCK1_BASE|0x08)
+#define	INTMASK     (SYSTEM_BLOCK1_BASE|0x0C)
+#define	GPIOSEL     (SYSTEM_BLOCK2_BASE|0x00)
+
+#define	GPIODATA    (GPIO_BLOCK_BASE|0x00)
+#define	GPIODIR     (GPIO_BLOCK_BASE|0x04)
+#define	GPIOIS      (GPIO_BLOCK_BASE|0x08)
+#define	GPIOIBE     (GPIO_BLOCK_BASE|0x0C)
+#define	GPIOIEV     (GPIO_BLOCK_BASE|0x10)
+#define	GPIOIE      (GPIO_BLOCK_BASE|0x14)
+#define	GPIORIS     (GPIO_BLOCK_BASE|0x18)
+#define	GPIOMIS     (GPIO_BLOCK_BASE|0x1C)
+#define	GPIOIC      (GPIO_BLOCK_BASE|0x20)
+#define	GPIOOMS     (GPIO_BLOCK_BASE|0x24)
+#define	GPIOPC      (GPIO_BLOCK_BASE|0x28)
+#define	GPIOID      (GPIO_BLOCK_BASE|0x30)
+
+#define SPI_WRITE(reg, val) \
+	{ SSITX,        0x00010000 | (((reg) & 0xff) << 8) | ((val) & 0xff) }, \
+	{ 0, 5 },
+
+#define SPI_WRITE1(reg) \
+	{ SSITX,        (reg) & 0xff }, \
+	{ 0, 5 },
+
+struct mddi_table {
+	uint32_t reg;
+	uint32_t value;
+};
+static struct mddi_table mddi_toshiba_init_table[] = {
+	{ DPSET0,       0x09e90046 },
+	{ DPSET1,       0x00000118 },
+	{ DPSUS,        0x00000000 },
+	{ DPRUN,        0x00000001 },
+	{ 1,            14         }, /* msleep 14 */
+	{ SYSCKENA,     0x00000001 },
+	//{ CLKENB,       0x000000EF },
+	{ CLKENB,       0x0000A1EF },  /*    # SYS.CLKENB  # Enable clocks for each module (without DCLK , i2cCLK) */
+	//{ CLKENB,       0x000025CB }, /* Clock enable register */
+
+	{ GPIODATA,     0x02000200 },  /*   # GPI .GPIODATA  # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 */
+	{ GPIODIR,      0x000030D  },  /* 24D   # GPI .GPIODIR  # Select direction of GPIO port (0,2,3,6,9 output) */
+	{ GPIOSEL,      0/*0x00000173*/},  /*   # SYS.GPIOSEL  # GPIO port multiplexing control */
+	{ GPIOPC,       0x03C300C0 },  /*   # GPI .GPIOPC  # GPIO2,3 PD cut */
+	{ WKREQ,        0x00000000 },  /*   # SYS.WKREQ  # Wake-up request event is VSYNC alignment */
+
+	{ GPIOIBE,      0x000003FF },
+	{ GPIOIS,       0x00000000 },
+	{ GPIOIC,       0x000003FF },
+	{ GPIOIE,       0x00000000 },
+
+	{ GPIODATA,     0x00040004 },  /*   # GPI .GPIODATA  # eDRAM VD supply */
+	{ 1,            1          }, /* msleep 1 */
+	{ GPIODATA,     0x02040004 },  /*   # GPI .GPIODATA  # eDRAM VD supply */
+	{ DRAMPWR,      0x00000001 }, /* eDRAM power */
+};
+
+static struct mddi_table mddi_toshiba_panel_init_table[] = {
+	{ SRST,         0x00000003 }, /* FIFO/LCDC not reset */
+	{ PORT_ENB,     0x00000001 }, /* Enable sync. Port */
+	{ START,        0x00000000 }, /* To stop operation */
+	//{ START,        0x00000001 }, /* To start operation */
+	{ PORT,         0x00000004 }, /* Polarity of VS/HS/DE. */
+	{ CMN,          0x00000000 },
+	{ GAMMA,        0x00000000 }, /* No Gamma correction */
+	{ INTFLG,       0x00000000 }, /* VSYNC interrupt flag clear/status */
+	{ INTMSK,       0x00000000 }, /* VSYNC interrupt mask is off. */
+	{ MPLFBUF,      0x00000000 }, /* Select frame buffer's base address. */
+	{ HDE_LEFT,     0x00000000 }, /* The value of HDE_LEFT. */
+	{ VDE_TOP,      0x00000000 }, /* The value of VDE_TPO. */
+	{ PXL,          0x00000001 }, /* 1. RGB666 */
+	                              /* 2. Data is valid from 1st frame of beginning. */
+	{ HDE_START,    0x00000006 }, /* HDE_START= 14 PCLK */
+	{ HDE_SIZE,     0x0000009F }, /* HDE_SIZE=320 PCLK */
+	{ HSW,          0x00000004 }, /* HSW= 10 PCLK */
+	{ VSW,          0x00000001 }, /* VSW=2 HCYCLE */
+	{ VDE_START,    0x00000003 }, /* VDE_START=4 HCYCLE */
+	{ VDE_SIZE,     0x000001DF }, /* VDE_SIZE=480 HCYCLE */
+	{ WAKEUP,       0x000001e2 }, /* Wakeup position in VSYNC mode. */
+	{ WSYN_DLY,     0x00000000 }, /* Wakeup position in VSIN mode. */
+	{ REGENB,       0x00000001 }, /* Set 1 to enable to change the value of registers. */
+	{ CLKENB,       0x000025CB }, /* Clock enable register */
+
+	{ SSICTL,       0x00000170 }, /* SSI control register */
+	{ SSITIME,      0x00000250 }, /* SSI timing control register */
+	{ SSICTL,       0x00000172 }, /* SSI control register */
+};
+
+
+static struct mddi_table mddi_sharp_init_table[] = {
+	{ VCYCLE,       0x000001eb },
+	{ HCYCLE,       0x000000ae },
+	{ REGENB,       0x00000001 }, /* Set 1 to enable to change the value of registers. */
+	{ GPIODATA,     0x00040000 }, /* GPIO2 low */
+	{ GPIODIR,      0x00000004 }, /* GPIO2 out */
+	{ 1,            1          }, /* msleep 1 */
+	{ GPIODATA,     0x00040004 }, /* GPIO2 high */
+	{ 1,            10         }, /* msleep 10 */
+	SPI_WRITE(0x5f, 0x01)
+	SPI_WRITE1(0x11)
+	{ 1,            200        }, /* msleep 200 */
+	SPI_WRITE1(0x29)
+	SPI_WRITE1(0xde)
+	{ START,        0x00000001 }, /* To start operation */
+};
+
+static struct mddi_table mddi_sharp_deinit_table[] = {
+	{ 1,            200        }, /* msleep 200 */
+	SPI_WRITE(0x10, 0x1)
+	{ 1,            100        }, /* msleep 100 */
+	{ GPIODATA,     0x00040004 }, /* GPIO2 high */
+	{ GPIODIR,      0x00000004 }, /* GPIO2 out */
+	{ GPIODATA,     0x00040000 }, /* GPIO2 low */
+	{ 1,            10         }, /* msleep 10 */
+};
+
+static struct mddi_table mddi_tpo_init_table[] = {
+	{ VCYCLE,       0x000001e5 },
+	{ HCYCLE,       0x000000ac },
+	{ REGENB,       0x00000001 }, /* Set 1 to enable to change the value of registers. */
+	{ 0,            20         }, /* udelay 20 */
+	{ GPIODATA,     0x00000004 }, /* GPIO2 high */
+	{ GPIODIR,      0x00000004 }, /* GPIO2 out */
+	{ 0,            20         }, /* udelay 20 */
+
+	SPI_WRITE(0x08, 0x01)
+	{ 0,            500        }, /* udelay 500 */
+	SPI_WRITE(0x08, 0x00)
+	SPI_WRITE(0x02, 0x00)
+	SPI_WRITE(0x03, 0x04)
+	SPI_WRITE(0x04, 0x0e)
+	SPI_WRITE(0x09, 0x02)
+	SPI_WRITE(0x0b, 0x08)
+	SPI_WRITE(0x0c, 0x53)
+	SPI_WRITE(0x0d, 0x01)
+	SPI_WRITE(0x0e, 0xe0)
+	SPI_WRITE(0x0f, 0x01)
+	SPI_WRITE(0x10, 0x58)
+	SPI_WRITE(0x20, 0x1e)
+	SPI_WRITE(0x21, 0x0a)
+	SPI_WRITE(0x22, 0x0a)
+	SPI_WRITE(0x23, 0x1e)
+	SPI_WRITE(0x25, 0x32)
+	SPI_WRITE(0x26, 0x00)
+	SPI_WRITE(0x27, 0xac)
+	SPI_WRITE(0x29, 0x06)
+	SPI_WRITE(0x2a, 0xa4)
+	SPI_WRITE(0x2b, 0x45)
+	SPI_WRITE(0x2c, 0x45)
+	SPI_WRITE(0x2d, 0x15)
+	SPI_WRITE(0x2e, 0x5a)
+	SPI_WRITE(0x2f, 0xff)
+	SPI_WRITE(0x30, 0x6b)
+	SPI_WRITE(0x31, 0x0d)
+	SPI_WRITE(0x32, 0x48)
+	SPI_WRITE(0x33, 0x82)
+	SPI_WRITE(0x34, 0xbd)
+	SPI_WRITE(0x35, 0xe7)
+	SPI_WRITE(0x36, 0x18)
+	SPI_WRITE(0x37, 0x94)
+	SPI_WRITE(0x38, 0x01)
+	SPI_WRITE(0x39, 0x5d)
+	SPI_WRITE(0x3a, 0xae)
+	SPI_WRITE(0x3b, 0xff)
+	SPI_WRITE(0x07, 0x09)
+	{ 0,            10         }, /* udelay 10 */
+	{ START,        0x00000001 }, /* To start operation */
+};
+
+static struct mddi_table mddi_tpo_deinit_table[] = {
+	SPI_WRITE(0x07, 0x19)
+	{ START,        0x00000000 }, /* To stop operation */
+	{ GPIODATA,     0x00040004 }, /* GPIO2 high */
+	{ GPIODIR,      0x00000004 }, /* GPIO2 out */
+	{ GPIODATA,     0x00040000 }, /* GPIO2 low */
+	{ 0,            5        }, /* usleep 5 */
+};
+
+
+#define GPIOSEL_VWAKEINT (1U << 0)
+#define INTMASK_VWAKEOUT (1U << 0)
+
+static void trout_process_mddi_table(struct msm_mddi_client_data *client_data,
+				     struct mddi_table *table, size_t count)
+{
+	int i;
+	for(i = 0; i < count; i++) {
+		uint32_t reg = table[i].reg;
+		uint32_t value = table[i].value;
+
+		if (reg == 0)
+			udelay(value);
+		else if (reg == 1)
+			msleep(value);
+		else
+			client_data->remote_write(client_data, value, reg);
+	}
+}
+
+static struct vreg *vreg_mddi_1v5;
+static struct vreg *vreg_lcm_2v85;
+
+static void trout_mddi_power_client(struct msm_mddi_client_data *client_data,
+				    int on)
+{
+    unsigned id, on_off;
+	if(on) {
+		on_off = 0;
+		id = PM_VREG_PDOWN_MDDI_ID;
+		msm_proc_comm(PCOM_VREG_PULLDOWN, &on_off, &id);
+		vreg_enable(vreg_mddi_1v5);
+		mdelay(5); // delay time >5ms and <10ms
+		gpio_set_value(V_VDDE2E_VDD2_GPIO, 1);
+		gpio_set_value(TROUT_GPIO_MDDI_32K_EN, 1);
+		msleep(3);
+		id = PM_VREG_PDOWN_AUX_ID;
+		msm_proc_comm(PCOM_VREG_PULLDOWN, &on_off, &id);
+		vreg_enable(vreg_lcm_2v85);
+		msleep(3);
+		gpio_set_value(MDDI_RST_N, 1);
+		msleep(10);
+	} else {
+		gpio_set_value(TROUT_GPIO_MDDI_32K_EN, 0);
+		gpio_set_value(MDDI_RST_N, 0);
+		msleep(10);
+		vreg_disable(vreg_lcm_2v85);
+		on_off = 1;
+		id = PM_VREG_PDOWN_AUX_ID;
+		msm_proc_comm(PCOM_VREG_PULLDOWN, &on_off, &id);
+		msleep(5);
+		gpio_set_value(V_VDDE2E_VDD2_GPIO, 0);
+		msleep(200);
+		vreg_disable(vreg_mddi_1v5);
+		id = PM_VREG_PDOWN_MDDI_ID;
+		msm_proc_comm(PCOM_VREG_PULLDOWN, &on_off, &id);
+	}
+}
+
+static int trout_mddi_toshiba_client_init(
+	struct msm_mddi_bridge_platform_data *bridge_data,
+	struct msm_mddi_client_data *client_data)
+{
+	int panel_id;
+
+	client_data->auto_hibernate(client_data, 0);
+	trout_process_mddi_table(client_data, mddi_toshiba_init_table,
+				 ARRAY_SIZE(mddi_toshiba_init_table));
+	client_data->auto_hibernate(client_data, 1);
+	panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3;
+	if (panel_id > 1) {
+		printk("unknown panel id at mddi_enable\n");
+		return -1;
+	}
+	return 0;
+}
+
+static int trout_mddi_toshiba_client_uninit(
+	struct msm_mddi_bridge_platform_data *bridge_data,
+	struct msm_mddi_client_data *client_data)
+{
+	return 0;
+}
+
+static int trout_mddi_panel_unblank(
+	struct msm_mddi_bridge_platform_data *bridge_data,
+	struct msm_mddi_client_data *client_data)
+{
+
+	int panel_id, ret = 0;
+	
+	trout_set_backlight_level(0);
+	client_data->auto_hibernate(client_data, 0);
+	trout_process_mddi_table(client_data, mddi_toshiba_panel_init_table,
+		ARRAY_SIZE(mddi_toshiba_panel_init_table));
+	panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3;
+	switch(panel_id) {
+	 case 0:
+		printk("init sharp panel\n");
+		trout_process_mddi_table(client_data,
+					 mddi_sharp_init_table,
+					 ARRAY_SIZE(mddi_sharp_init_table));
+		break;
+	case 1:
+		printk("init tpo panel\n");
+		trout_process_mddi_table(client_data,
+					 mddi_tpo_init_table,
+					 ARRAY_SIZE(mddi_tpo_init_table));
+		break;
+	default:
+		printk("unknown panel_id: %d\n", panel_id);
+		ret = -1;
+	};
+	mutex_lock(&trout_backlight_lock);
+	trout_set_backlight_level(trout_backlight_brightness);
+	trout_backlight_off = 0;
+	mutex_unlock(&trout_backlight_lock);
+	client_data->auto_hibernate(client_data, 1);
+	client_data->remote_write(client_data, GPIOSEL_VWAKEINT, GPIOSEL);
+	client_data->remote_write(client_data, INTMASK_VWAKEOUT, INTMASK);
+	return ret;
+
+}
+
+static int trout_mddi_panel_blank(
+	struct msm_mddi_bridge_platform_data *bridge_data,
+	struct msm_mddi_client_data *client_data)
+{
+	int panel_id, ret = 0;
+
+	panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3;
+	client_data->auto_hibernate(client_data, 0);
+	switch(panel_id) {
+	case 0:
+		printk("deinit sharp panel\n");
+		trout_process_mddi_table(client_data,
+					 mddi_sharp_deinit_table,
+					 ARRAY_SIZE(mddi_sharp_deinit_table));
+		break;
+	case 1:
+		printk("deinit tpo panel\n");
+		trout_process_mddi_table(client_data,
+					 mddi_tpo_deinit_table,
+					 ARRAY_SIZE(mddi_tpo_deinit_table));
+		break;
+	default:
+		printk("unknown panel_id: %d\n", panel_id);
+		ret = -1;
+	};
+	client_data->auto_hibernate(client_data, 1);
+	mutex_lock(&trout_backlight_lock);
+	trout_set_backlight_level(0);
+	trout_backlight_off = 1;
+	mutex_unlock(&trout_backlight_lock);
+	client_data->remote_write(client_data, 0, SYSCLKENA);
+	client_data->remote_write(client_data, 1, DPSUS);
+	return ret;
+}
+
+static void trout_brightness_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+	mutex_lock(&trout_backlight_lock);
+	trout_backlight_brightness = value;
+	if(!trout_backlight_off)
+		trout_set_backlight_level(trout_backlight_brightness);
+	mutex_unlock(&trout_backlight_lock);
+}
+
+static struct led_classdev trout_backlight_led = {
+	.name			= "lcd-backlight",
+	.brightness = TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS,
+	.brightness_set = trout_brightness_set,
+};
+
+static int trout_backlight_probe(struct platform_device *pdev)
+{
+	led_classdev_register(&pdev->dev, &trout_backlight_led);
+	return 0;
+}
+
+static int trout_backlight_remove(struct platform_device *pdev)
+{
+	led_classdev_unregister(&trout_backlight_led);
+	return 0;
+}
+
+static struct platform_driver trout_backlight_driver = {
+	.probe		= trout_backlight_probe,
+	.remove		= trout_backlight_remove,
+	.driver		= {
+		.name		= "trout-backlight",
+		.owner		= THIS_MODULE,
+	},
+};
+
+static struct resource resources_msm_fb[] = {
+	{
+		.start = MSM_FB_BASE,
+		.end = MSM_FB_BASE + MSM_FB_SIZE,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct msm_mddi_bridge_platform_data toshiba_client_data = {
+	.init = trout_mddi_toshiba_client_init,
+	.uninit = trout_mddi_toshiba_client_uninit,
+	.blank = trout_mddi_panel_blank,
+	.unblank = trout_mddi_panel_unblank,
+	.fb_data = {
+		.xres = 320,
+		.yres = 480,
+		.width = 45,
+		.height = 67,
+		.output_format = 0,
+	},
+};
+
+static struct msm_mddi_platform_data mddi_pdata = {
+	.clk_rate = 122880000,
+	.power_client = trout_mddi_power_client,
+	.fb_resource = resources_msm_fb,
+	.num_clients = 1,
+	.client_platform_data = {
+		{
+			.product_id = (0xd263 << 16 | 0),
+			.name = "mddi_c_d263_0000",
+			//.name = "mddi_c_dummy",
+			.id = 0,
+			.client_data = &toshiba_client_data,
+			//.client_data = &toshiba_client_data.fb_data,
+			.clk_rate = 0,
+		},
+	},
+};
+
+static struct platform_device trout_backlight = {
+	.name = "trout-backlight",
+};
+
+int __init trout_init_panel(void)
+{
+	int rc;
+
+        if (!machine_is_trout())
+                return 0;
+	vreg_mddi_1v5 = vreg_get(0, "gp2");
+	if (IS_ERR(vreg_mddi_1v5))
+		return PTR_ERR(vreg_mddi_1v5);
+	vreg_lcm_2v85 = vreg_get(0, "gp4");
+	if (IS_ERR(vreg_lcm_2v85))
+		return PTR_ERR(vreg_lcm_2v85);
+
+	trout_new_backlight = system_rev >= 5;
+	if (trout_new_backlight) {
+		uint32_t config = PCOM_GPIO_CFG(27, 0, GPIO_OUTPUT,
+						GPIO_NO_PULL, GPIO_8MA);
+		msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
+	}
+	else {
+		uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT,
+						GPIO_NO_PULL, GPIO_8MA);
+		msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
+
+		gp_clk = clk_get(NULL, "gp_clk");
+		if (IS_ERR(gp_clk)) {
+			printk(KERN_ERR "trout_init_panel: could not get gp"
+			       "clock\n");
+			gp_clk = NULL;
+		}
+		rc = clk_set_rate(gp_clk, 19200000);
+		if (rc)
+			printk(KERN_ERR "trout_init_panel: set clock rate "
+			       "failed\n");
+	}
+
+	rc = platform_device_register(&msm_device_mdp);
+	if (rc)
+		return rc;
+	msm_device_mddi0.dev.platform_data = &mddi_pdata;
+	rc = platform_device_register(&msm_device_mddi0);
+	if (rc)
+		return rc;
+	platform_device_register(&trout_backlight);
+	return platform_driver_register(&trout_backlight_driver);
+}
+
+device_initcall(trout_init_panel);
diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c
index fde9d8f..c782f72 100644
--- a/arch/arm/mach-msm/devices-msm7x00.c
+++ b/arch/arm/mach-msm/devices-msm7x00.c
@@ -346,6 +346,73 @@ int __init msm_add_sdcc(unsigned int controller, struct mmc_platform_data *plat,
 	return platform_device_register(pdev);
 }
 
+static struct resource resources_mddi0[] = {
+	{
+		.start	= MSM_PMDH_PHYS,
+		.end	= MSM_PMDH_PHYS + MSM_PMDH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_MDDI_PRI,
+		.end	= INT_MDDI_PRI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource resources_mddi1[] = {
+	{
+		.start	= MSM_EMDH_PHYS,
+		.end	= MSM_EMDH_PHYS + MSM_EMDH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_MDDI_EXT,
+		.end	= INT_MDDI_EXT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_mddi0 = {
+	.name = "msm_mddi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(resources_mddi0),
+	.resource = resources_mddi0,
+	.dev = {
+		.coherent_dma_mask      = 0xffffffff,
+	},
+};
+
+struct platform_device msm_device_mddi1 = {
+	.name = "msm_mddi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(resources_mddi1),
+	.resource = resources_mddi1,
+	.dev = {
+		.coherent_dma_mask      = 0xffffffff,
+	},
+};
+
+static struct resource resources_mdp[] = {
+	{
+		.start	= MSM_MDP_PHYS,
+		.end	= MSM_MDP_PHYS + MSM_MDP_SIZE - 1,
+		.name	= "mdp",
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.start	= INT_MDP,
+		.end	= INT_MDP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_mdp = {
+	.name = "msm_mdp",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(resources_mdp),
+	.resource = resources_mdp,
+};
+
 struct clk msm_clocks_7x01a[] = {
 	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
 	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h
index fd71edc..7291e3e 100644
--- a/arch/arm/mach-msm/devices.h
+++ b/arch/arm/mach-msm/devices.h
@@ -37,6 +37,10 @@ extern struct platform_device msm_device_smd;
 
 extern struct platform_device msm_device_nand;
 
+extern struct platform_device msm_device_mddi0;
+extern struct platform_device msm_device_mddi1;
+extern struct platform_device msm_device_mdp;
+
 extern struct clk msm_clocks_7x01a[];
 extern unsigned msm_num_clocks_7x01a;
 
-- 
1.7.0.4

-- 
Sent by an consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

^ permalink raw reply related	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-07-13 20:05 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-07-13 20:03 [PATCH 1/5] msm: fb: initial framebuffer support Daniel Walker
2010-07-13 20:03 ` [PATCH 2/5] msm: gpio support for trout Daniel Walker
2010-07-13 20:03 ` [PATCH 3/5] video: msm: change to min/max clock calls Daniel Walker
2010-07-13 20:03 ` [PATCH 4/5] msm: fix up mddi clock Daniel Walker
2010-07-13 20:03 ` [PATCH 5/5] [ARM] msm: mdp: fix for 2.6.32 Daniel Walker
2010-07-13 20:05 ` [PATCH 1/5] msm: fb: initial framebuffer support Daniel Walker

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.