From: Maxim Levitsky <maximlevitsky@gmail.com>
To: lirc-list@lists.sourceforge.net
Cc: Jarod Wilson <jarod@wilsonet.com>,
linux-input@vger.kernel.org, linux-media@vger.kernel.org,
Mauro Carvalho Chehab <mchehab@redhat.com>,
Christoph Bartelmus <lirc@bartelmus.de>
Subject: [PATCH 0/9 v2] IR: few fixes, additions and ENE driver
Date: Fri, 30 Jul 2010 05:17:02 +0300 [thread overview]
Message-ID: <1280456235-2024-1-git-send-email-maximlevitsky@gmail.com> (raw)
Hi,
This is third revision of my patchset.
Notable changes:
* Added whitespace fixes from Jarod Wilson
* 4 new bugs fixed (patches 04-07). Now in-kernel decoding
works perfectly with all protocols it supports.
* lirc interface additions cleaned up.
no more wrong support for timeout reports
new ioctl for learning mode
still need to add carrier detect, timeout reports, and rx filter
* replaced int with bool in my driver, plus few cleanups.
* added myself to maintainers of the ene driver
* added another PNP ID to ene driver
Best regards,
Maxim Levitsky
next reply other threads:[~2010-07-30 2:17 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-30 2:17 Maxim Levitsky [this message]
2010-07-30 2:17 ` [PATCH 01/13] IR: Kconfig fixes Maxim Levitsky
2010-07-30 2:17 ` [PATCH 02/13] IR: minor fixes: Maxim Levitsky
2010-07-30 2:17 ` [PATCH 03/13] IR: replace spinlock with mutex Maxim Levitsky
2010-07-30 2:17 ` [PATCH 04/13] IR: fix locking in ir_raw_event_work Maxim Levitsky
2010-07-30 2:42 ` Andy Walls
2010-07-30 11:02 ` Maxim Levitsky
2010-07-30 2:17 ` [PATCH 05/13] IR: JVC: make repeat work Maxim Levitsky
2010-07-30 2:17 ` [PATCH 06/13] IR: nec decoder: fix repeat Maxim Levitsky
2010-07-30 2:50 ` Andy Walls
2010-07-30 2:17 ` [PATCH 07/13] IR: NECX: support repeat Maxim Levitsky
2010-07-30 2:17 ` [PATCH 08/13] IR: Allow not to compile keymaps in Maxim Levitsky
2010-07-30 2:17 ` [PATCH 09/13] IR: add helper function for hardware with small o/b buffer Maxim Levitsky
2010-07-30 2:17 ` [PATCH 10/13] IR: extend interfaces to support more device settings LIRC: add new IOCTL that enables learning mode (wide band receiver) Maxim Levitsky
2010-07-30 2:17 ` [PATCH 11/13] IR: report unknown scancodes the in-kernel decoders found Maxim Levitsky
2010-07-30 2:17 ` [PATCH 12/13] STAGING: remove lirc_ene0100 driver Maxim Levitsky
2010-07-30 2:17 ` [PATCH 13/13] IR: Port ene driver to new IR subsystem and enable it Maxim Levitsky
2010-07-30 2:39 ` Jon Smirl
2010-07-30 3:46 ` Andy Walls
2010-07-30 11:36 ` Maxim Levitsky
2010-07-30 11:51 ` Jon Smirl
2010-07-30 11:51 ` Jon Smirl
2010-07-30 11:54 ` Maxim Levitsky
2010-07-30 12:02 ` Jon Smirl
2010-07-30 12:07 ` Jon Smirl
2010-07-30 12:45 ` Maxim Levitsky
2010-07-31 13:55 ` Andy Walls
2010-07-31 14:28 ` Maxim Levitsky
2010-07-31 14:37 ` Jon Smirl
2010-07-31 14:37 ` Jon Smirl
2010-07-31 14:51 ` Maxim Levitsky
2010-07-31 15:12 ` Andy Walls
2010-07-31 16:25 ` Jon Smirl
2010-07-31 16:25 ` Jon Smirl
2010-07-31 16:44 ` Maxim Levitsky
2010-07-31 16:51 ` Maxim Levitsky
2010-07-31 17:47 ` Christoph Bartelmus
2010-07-31 17:47 ` Christoph Bartelmus
2010-07-31 18:14 ` Jon Smirl
2010-07-31 18:14 ` Jon Smirl
2010-07-31 18:33 ` Jon Smirl
2010-07-31 18:51 ` Andy Walls
2010-07-31 21:53 ` Jon Smirl
2010-07-31 21:53 ` Jon Smirl
2010-07-31 23:26 ` Maxim Levitsky
2010-08-01 9:43 ` Christoph Bartelmus
2010-08-01 9:43 ` Christoph Bartelmus
2010-08-02 15:12 ` Remote that breaks current system (was: IR: Port ene driver...) it Jarod Wilson
2010-08-02 15:12 ` Jarod Wilson
2010-08-02 16:11 ` Jon Smirl
2010-08-02 16:42 ` Remote that breaks current system Christoph Bartelmus
2010-08-02 16:42 ` Christoph Bartelmus
2010-08-02 17:13 ` Jon Smirl
2010-08-02 18:09 ` Jarod Wilson
2010-08-02 18:09 ` Jarod Wilson
2010-08-02 20:42 ` Jon Smirl
2010-08-02 20:42 ` Jon Smirl
2010-08-11 14:38 ` Jarod Wilson
2010-08-11 14:38 ` Jarod Wilson
2010-08-12 6:46 ` Christoph Bartelmus
2010-08-12 6:46 ` Christoph Bartelmus
2010-08-16 4:04 ` Jarod Wilson
2010-08-16 20:41 ` Maxim Levitsky
2010-08-17 0:14 ` Jarod Wilson
2010-08-17 3:30 ` Mauro Carvalho Chehab
2010-08-17 3:40 ` Jarod Wilson
2010-08-02 17:51 ` Jarod Wilson
2010-08-01 9:50 ` [PATCH 13/13] IR: Port ene driver to new IR subsystem and enable it Christoph Bartelmus
2010-08-01 9:50 ` Christoph Bartelmus
2010-08-01 14:00 ` Jon Smirl
2010-08-01 14:00 ` Jon Smirl
2010-08-01 14:05 ` Jon Smirl
2010-08-01 15:13 ` Christoph Bartelmus
2010-08-01 15:13 ` Christoph Bartelmus
-- strict thread matches above, loose matches on Subject: below --
2010-07-29 7:23 <kein Betreff> Christoph Bartelmus
2010-07-29 14:41 ` [PATCH 0/9 v2] IR: few fixes, additions and ENE driver Maxim Levitsky
2010-07-29 15:38 ` Andy Walls
2010-07-29 16:26 ` Maxim Levitsky
2010-07-29 16:58 ` Andy Walls
2010-07-29 17:15 ` Christoph Bartelmus
2010-07-29 17:15 ` Christoph Bartelmus
2010-07-29 17:35 ` Maxim Levitsky
2010-07-29 19:35 ` Christoph Bartelmus
2010-07-29 19:35 ` Christoph Bartelmus
2010-07-29 20:04 ` Maxim Levitsky
2010-07-29 21:28 ` Jarod Wilson
2010-07-29 21:57 ` Jarod Wilson
2010-07-29 22:07 ` Maxim Levitsky
2010-07-29 22:24 ` Maxim Levitsky
2010-07-30 2:03 ` Andy Walls
2010-07-29 17:17 ` Christoph Bartelmus
2010-07-29 17:17 ` Christoph Bartelmus
2010-07-29 16:58 ` Christoph Bartelmus
2010-07-29 16:58 ` Christoph Bartelmus
2010-07-29 17:43 ` Maxim Levitsky
2010-07-29 19:42 ` Christoph Bartelmus
2010-07-29 19:42 ` Christoph Bartelmus
2010-07-29 19:58 ` Maxim Levitsky
2010-07-29 19:21 ` Jarod Wilson
2010-07-28 23:40 (unknown), Maxim Levitsky
2010-07-29 3:52 ` [PATCH 0/9 v2] IR: few fixes, additions and ENE driver Jarod Wilson
2010-07-29 15:30 ` Maxim Levitsky
2010-07-29 15:26 ` Jarod Wilson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1280456235-2024-1-git-send-email-maximlevitsky@gmail.com \
--to=maximlevitsky@gmail.com \
--cc=jarod@wilsonet.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lirc-list@lists.sourceforge.net \
--cc=lirc@bartelmus.de \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.